9 Dec
2010
9 Dec
'10
6:23 p.m.
Hi,
Freeradius Access-Accept:
Sending Access-Accept of id 29 to 10.0.0.3 port 1645 MS-MPPE-Recv-Key = 0x88a007eda1d4841ea348c3a0d49fd963e3f188a3f77509c3d3eb045d3a23fa7c MS-MPPE-Send-Key = 0xbe8168ed341e6a4f0332a9d0c8b1893f574e98fa4af7af74dbebf944f687eaf7 EAP-Message = 0x030c0004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "GROUPINFRA\\rangell" Finished request 10.
I don´t see attributes (VLAN, IEEE-802 and 200) in freerdius access-accept, but in a stretch of logs I see messages below:
copy the PEAP tunnel attributes to the outer - if you read eap.conf that is provided with default config you will see the option to set that to 'yes' alan