EAP-TTLS not working on windows 11 for a wired usage

25 Jul 2022

      Hello everyone, and thank you for your future help in solving this problem.

I’m trying to implement, a FreeRADIUS server for a wired usage using
EAP-TTLS/PAP protocol, I’m authorizing my users based on their credentials
saved in the users file.

I’ve created my certificates (CA and server) following the recommended
guidelines.

When I test EAP-TTLS/PAP with eapol_test, i’ve got a success message, the
same goes when I authenticate on my laptop under Windows 11 OS, with
EAP-PEAP, while previously disabling « check the identity of the server… ».
And when I click on the connect button after sending my credentials, to
acknowledge my certificate is not safe, I succeed to connect.

But when I try to authenticate with EAP-TTLS/PAP, it fails when I click on «
connect », I don’t have any following response to my Access-Challenge
packets.

I know there is an article on wiki.freeradius about certificate
compatibility, but I’ve not been able to solve the problem even with it.

FreeRADIUS Version 3.0.20

Copyright (C) 1999-2019 The FreeRADIUS server project and contributors

There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A

PARTICULAR PURPOSE

You may redistribute copies of FreeRADIUS under the terms of the

GNU General Public License

For more information about these matters, see the file named COPYRIGHT

Starting - reading configuration files ...

including dictionary file /usr/share/freeradius/dictionary

including dictionary file /usr/share/freeradius/dictionary.dhcp

including dictionary file /usr/share/freeradius/dictionary.vqp

including dictionary file /etc/raddb/dictionary

including configuration file /etc/raddb/radiusd.conf

including configuration file /etc/raddb/proxy.conf

including configuration file /etc/raddb/clients.conf

including files in directory /etc/raddb/mods-enabled/

including configuration file /etc/raddb/mods-enabled/radutmp

including configuration file /etc/raddb/mods-enabled/dynamic_clients

including configuration file /etc/raddb/mods-enabled/files

including configuration file /etc/raddb/mods-enabled/detail.log

including configuration file /etc/raddb/mods-enabled/exec

including configuration file /etc/raddb/mods-enabled/cache_eap

including configuration file /etc/raddb/mods-enabled/attr_filter

including configuration file /etc/raddb/mods-enabled/preprocess

including configuration file /etc/raddb/mods-enabled/ntlm_auth

including configuration file /etc/raddb/mods-enabled/utf8

including configuration file /etc/raddb/mods-enabled/chap

including configuration file /etc/raddb/mods-enabled/expr

including configuration file /etc/raddb/mods-enabled/unpack

including configuration file /etc/raddb/mods-enabled/unix

including configuration file /etc/raddb/mods-enabled/detail

including configuration file /etc/raddb/mods-enabled/logintime

including configuration file /etc/raddb/mods-enabled/eap

including configuration file /etc/raddb/mods-enabled/passwd

including configuration file /etc/raddb/mods-enabled/pap

including configuration file /etc/raddb/mods-enabled/soh

including configuration file /etc/raddb/mods-enabled/realm

including configuration file /etc/raddb/mods-enabled/echo

including configuration file /etc/raddb/mods-enabled/date

including configuration file /etc/raddb/mods-enabled/always

including configuration file /etc/raddb/mods-enabled/sradutmp

including configuration file /etc/raddb/mods-enabled/expiration

including configuration file /etc/raddb/mods-enabled/mschap

including configuration file /etc/raddb/mods-enabled/linelog

including configuration file /etc/raddb/mods-enabled/replicate

including configuration file /etc/raddb/mods-enabled/digest

including files in directory /etc/raddb/policy.d/

including configuration file /etc/raddb/policy.d/canonicalization

including configuration file /etc/raddb/policy.d/cui

including configuration file /etc/raddb/policy.d/rfc7542

including configuration file /etc/raddb/policy.d/accounting

including configuration file /etc/raddb/policy.d/control

including configuration file /etc/raddb/policy.d/eap

including configuration file /etc/raddb/policy.d/dhcp

including configuration file /etc/raddb/policy.d/debug

including configuration file /etc/raddb/policy.d/filter

including configuration file /etc/raddb/policy.d/operator-name

including files in directory /etc/raddb/sites-enabled/

including configuration file /etc/raddb/sites-enabled/inner-tunnel

including configuration file /etc/raddb/sites-enabled/default

main {

security {

               user = "radiusd"

               group = "radiusd"

               allow_core_dumps = no

}

                name = "radiusd"

                prefix = "/usr"

                localstatedir = "/var"

                logdir = "/var/log/radius"

                run_dir = "/var/run/radiusd"

}

main {

                name = "radiusd"

                prefix = "/usr"

                localstatedir = "/var"

                sbindir = "/usr/sbin"

                logdir = "/var/log/radius"

                run_dir = "/var/run/radiusd"

                libdir = "/usr/lib64/freeradius"

                radacctdir = "/var/log/radius/radacct"

                hostname_lookups = no

                max_request_time = 30

                cleanup_delay = 5

                max_requests = 16384

                pidfile = "/var/run/radiusd/radiusd.pid"

                checkrad = "/usr/sbin/checkrad"

                debug_level = 0

                proxy_requests = yes

log {

               stripped_names = no

               auth = yes

               auth_badpass = no

               auth_goodpass = no

               colourise = yes

               msg_denied = "You are already logged in - access denied"

}

resources {

}

security {

               max_attributes = 200

               reject_delay = 1.000000

               status_server = yes

}

}

radiusd: #### Loading Realms and Home Servers ####

proxy server {

               retry_delay = 5

               retry_count = 3

               default_fallback = no

               dead_time = 120

               wake_all_if_all_dead = no

}

home_server localhost {

               ipv4addr = 127.0.0.1

               port = 1812

               type = "auth"

               proto = "udp"

               secret = <<< secret >>>

               response_window = 20.000000

               response_timeouts = 1

               max_outstanding = 65536

               zombie_period = 40

               status_check = "status-server"

               ping_interval = 30

               check_interval = 30

               check_timeout = 4

               num_answers_to_alive = 3

               revive_interval = 120

  limit {

               max_connections = 16

               max_requests = 0

               lifetime = 0

               idle_timeout = 0

  }

  coa {

               irt = 2

               mrt = 16

               mrc = 5

               mrd = 30

  }

}

home_server_pool my_auth_failover {

                type = fail-over

                home_server = localhost

}

realm example.com {

                auth_pool = my_auth_failover

}

realm LOCAL {

}

radiusd: #### Loading Clients ####

client localhost {

               ipaddr = 127.0.0.1

               require_message_authenticator = no

               secret = <<< secret >>>

               shortname = "localhost"

               proto = "udp"

  limit {

               max_connections = 16

               lifetime = 0

               idle_timeout = 30

  }

}

client private-network-1 {

               ipaddr = 10.101.0.20

               require_message_authenticator = no

               secret = <<< secret >>>

  limit {

               max_connections = 16

               lifetime = 0

               idle_timeout = 30

  }

}

client swi-d1-p1-p173-001 {

               ipv4addr = 10.100.0.16

               require_message_authenticator = no

               secret = <<< secret >>>

               shortname = "swi_nico_p173"

               nas_type = "cisco"

               virtual_server = "serveur_eap_ttls_pap"

  limit {

               max_connections = 16

               lifetime = 0

               idle_timeout = 30

  }

}

client swi-d1-p173-002 {

               ipv4addr = 10.100.0.50

               require_message_authenticator = no

               secret = <<< secret >>>

               shortname = "swi_said_edward_p173"

               nas_type = "cisco"

  limit {

               max_connections = 16

               lifetime = 0

               idle_timeout = 30

  }

}

client test-network {

               ipaddr = 10.112.0.136

               require_message_authenticator = no

               secret = <<< secret >>>

  limit {

               max_connections = 16

               lifetime = 0

               idle_timeout = 30

  }

}

Debugger not attached

# Creating Auth-Type = mschap

# Creating Auth-Type = eap

# Creating Auth-Type = PAP

# Creating Auth-Type = CHAP

# Creating Auth-Type = MS-CHAP

# Creating Auth-Type = digest

radiusd: #### Instantiating modules ####

modules {

  # Loaded module rlm_radutmp

  # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp

  radutmp {

               filename = "/var/log/radius/radutmp"

               username = "%{User-Name}"

               case_sensitive = yes

               check_with_nas = yes

               permissions = 384

               caller_id = yes

  }

  # Loaded module rlm_dynamic_clients

  # Loading module "dynamic_clients" from file
/etc/raddb/mods-enabled/dynamic_clients

  # Loaded module rlm_files

  # Loading module "files" from file /etc/raddb/mods-enabled/files

  files {

               filename = "/etc/raddb/mods-config/files/authorize"

               acctusersfile = "/etc/raddb/mods-config/files/accounting"

               preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"

  }

  # Loaded module rlm_detail

  # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log

  detail auth_log {

               filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addre
ss}}/auth-detail-%Y%m%d"

               header = "%t"

               permissions = 384

               locking = no

               escape_filenames = no

               log_packet_header = no

  }

  # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log

  detail reply_log {

               filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addre
ss}}/reply-detail-%Y%m%d"

               header = "%t"

               permissions = 384

               locking = no

               escape_filenames = no

               log_packet_header = no

  }

  # Loading module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log

  detail pre_proxy_log {

               filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addre
ss}}/pre-proxy-detail-%Y%m%d"

               header = "%t"

               permissions = 384

               locking = no

               escape_filenames = no

               log_packet_header = no

  }

  # Loading module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log

  detail post_proxy_log {

               filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addre
ss}}/post-proxy-detail-%Y%m%d"

               header = "%t"

               permissions = 384

               locking = no

               escape_filenames = no

               log_packet_header = no

  }

  # Loaded module rlm_exec

  # Loading module "exec" from file /etc/raddb/mods-enabled/exec

  exec {

               wait = no

               input_pairs = "request"

               shell_escape = yes

               timeout = 10

  }

  # Loaded module rlm_cache

  # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap

  cache cache_eap {

               driver = "rlm_cache_rbtree"

               key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"

               ttl = 15

               max_entries = 0

               epoch = 0

               add_stats = no

  }

  # Loaded module rlm_attr_filter

  # Loading module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter

  attr_filter attr_filter.post-proxy {

               filename = "/etc/raddb/mods-config/attr_filter/post-proxy"

               key = "%{Realm}"

               relaxed = no

  }

  # Loading module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter

  attr_filter attr_filter.pre-proxy {

               filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"

               key = "%{Realm}"

               relaxed = no

  }

  # Loading module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter

  attr_filter attr_filter.access_reject {

               filename = "/etc/raddb/mods-config/attr_filter/access_reject"

               key = "%{User-Name}"

               relaxed = no

  }

  # Loading module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter

  attr_filter attr_filter.access_challenge {

               filename =
"/etc/raddb/mods-config/attr_filter/access_challenge"

               key = "%{User-Name}"

               relaxed = no

  }

  # Loading module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter

  attr_filter attr_filter.accounting_response {

               filename =
"/etc/raddb/mods-config/attr_filter/accounting_response"

               key = "%{User-Name}"

               relaxed = no

  }

  # Loaded module rlm_preprocess

  # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess

  preprocess {

               huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"

               hints = "/etc/raddb/mods-config/preprocess/hints"

               with_ascend_hack = no

               ascend_channels_per_line = 23

               with_ntdomain_hack = no

               with_specialix_jetstream_hack = no

               with_cisco_vsa_hack = yes

               with_alvarion_vsa_hack = no

  }

  # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth

  exec ntlm_auth {

               wait = yes

               program = "/path/to/ntlm_auth --request-nt-key
--domain=MYDOMAIN --username=%{mschap:User-Name}
--password=%{User-Password}"

               shell_escape = yes

  }

  # Loaded module rlm_utf8

  # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8

  # Loaded module rlm_chap

  # Loading module "chap" from file /etc/raddb/mods-enabled/chap

  # Loaded module rlm_expr

  # Loading module "expr" from file /etc/raddb/mods-enabled/expr

  expr {

               safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"

  }

  # Loaded module rlm_unpack

  # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack

  # Loaded module rlm_unix

  # Loading module "unix" from file /etc/raddb/mods-enabled/unix

  unix {

               radwtmp = "/var/log/radius/radwtmp"

  }

Creating attribute Unix-Group

  # Loading module "detail" from file /etc/raddb/mods-enabled/detail

  detail {

               filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addre
ss}}/detail-%Y%m%d"

               header = "%t"

               permissions = 384

               locking = no

               escape_filenames = no

               log_packet_header = no

  }

  # Loaded module rlm_logintime

  # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime

  logintime {

               minimum_timeout = 60

  }

  # Loaded module rlm_eap

  # Loading module "eap" from file /etc/raddb/mods-enabled/eap

  eap {

               default_eap_type = "ttls"

               timer_expire = 60

               ignore_unknown_eap_types = no

               cisco_accounting_username_bug = yes

               max_sessions = 16384

  }

  # Loaded module rlm_passwd

  # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd

  passwd etc_passwd {

               filename = "/etc/passwd"

               format = "*User-Name:Crypt-Password:"

               delimiter = ":"

               ignore_nislike = no

               ignore_empty = yes

               allow_multiple_keys = no

               hash_size = 100

  }

  # Loaded module rlm_pap

  # Loading module "pap" from file /etc/raddb/mods-enabled/pap

  pap {

               normalise = yes

  }

  # Loaded module rlm_soh

  # Loading module "soh" from file /etc/raddb/mods-enabled/soh

  soh {

               dhcp = yes

  }

  # Loaded module rlm_realm

  # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm

  realm IPASS {

               format = "prefix"

               delimiter = "/"

               ignore_default = no

               ignore_null = no

  }

  # Loading module "suffix" from file /etc/raddb/mods-enabled/realm

  realm suffix {

               format = "suffix"

               delimiter = "@"

               ignore_default = no

               ignore_null = no

  }

  # Loading module "bangpath" from file /etc/raddb/mods-enabled/realm

  realm bangpath {

               format = "prefix"

               delimiter = "!"

               ignore_default = no

               ignore_null = no

  }

  # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm

  realm realmpercent {

               format = "suffix"

               delimiter = "%"

               ignore_default = no

               ignore_null = no

  }

  # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm

  realm ntdomain {

               format = "prefix"

               delimiter = "\\"

               ignore_default = no

               ignore_null = no

  }

  # Loading module "echo" from file /etc/raddb/mods-enabled/echo

  exec echo {

               wait = yes

               program = "/bin/echo %{User-Name}"

               input_pairs = "request"

               output_pairs = "reply"

               shell_escape = yes

  }

  # Loaded module rlm_date

  # Loading module "date" from file /etc/raddb/mods-enabled/date

  date {

               format = "%b %e %Y %H:%M:%S %Z"

               utc = no

  }

  # Loading module "wispr2date" from file /etc/raddb/mods-enabled/date

  date wispr2date {

               format = "%Y-%m-%dT%H:%M:%S"

               utc = no

  }

  # Loaded module rlm_always

  # Loading module "reject" from file /etc/raddb/mods-enabled/always

  always reject {

               rcode = "reject"

               simulcount = 0

               mpp = no

  }

  # Loading module "fail" from file /etc/raddb/mods-enabled/always

  always fail {

               rcode = "fail"

               simulcount = 0

               mpp = no

  }

  # Loading module "ok" from file /etc/raddb/mods-enabled/always

  always ok {

               rcode = "ok"

               simulcount = 0

               mpp = no

  }

  # Loading module "handled" from file /etc/raddb/mods-enabled/always

  always handled {

               rcode = "handled"

               simulcount = 0

               mpp = no

  }

  # Loading module "invalid" from file /etc/raddb/mods-enabled/always

  always invalid {

               rcode = "invalid"

               simulcount = 0

               mpp = no

  }

  # Loading module "userlock" from file /etc/raddb/mods-enabled/always

  always userlock {

               rcode = "userlock"

               simulcount = 0

               mpp = no

  }

  # Loading module "notfound" from file /etc/raddb/mods-enabled/always

  always notfound {

               rcode = "notfound"

               simulcount = 0

               mpp = no

  }

  # Loading module "noop" from file /etc/raddb/mods-enabled/always

  always noop {

               rcode = "noop"

               simulcount = 0

               mpp = no

  }

  # Loading module "updated" from file /etc/raddb/mods-enabled/always

  always updated {

               rcode = "updated"

               simulcount = 0

               mpp = no

  }

  # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp

  radutmp sradutmp {

               filename = "/var/log/radius/sradutmp"

               username = "%{User-Name}"

               case_sensitive = yes

               check_with_nas = yes

               permissions = 420

               caller_id = no

  }

  # Loaded module rlm_expiration

  # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration

  # Loaded module rlm_mschap

  # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap

  mschap {

               use_mppe = yes

               require_encryption = no

               require_strong = no

               with_ntdomain_hack = yes

   passchange {

   }

               allow_retry = yes

               winbind_retry_with_normalised_username = no

  }

  # Loaded module rlm_linelog

  # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog

  linelog {

               filename = "/var/log/radius/linelog"

               escape_filenames = no

               syslog_severity = "info"

               permissions = 384

               format = "This is a log message for %{User-Name}"

               reference = "messages.%{%{reply:Packet-Type}:-default}"

  }

  # Loading module "log_accounting" from file
/etc/raddb/mods-enabled/linelog

  linelog log_accounting {

               filename = "/var/log/radius/linelog-accounting"

               escape_filenames = no

               syslog_severity = "info"

               permissions = 384

               format = ""

               reference =
"Accounting-Request.%{%{Acct-Status-Type}:-unknown}"

  }

  # Loaded module rlm_replicate

  # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate

  # Loaded module rlm_digest

  # Loading module "digest" from file /etc/raddb/mods-enabled/digest

  instantiate {

  }

  # Instantiating module "files" from file /etc/raddb/mods-enabled/files

reading pairlist file /etc/raddb/mods-config/files/authorize

reading pairlist file /etc/raddb/mods-config/files/accounting

reading pairlist file /etc/raddb/mods-config/files/pre-proxy

  # Instantiating module "auth_log" from file
/etc/raddb/mods-enabled/detail.log

rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail
output

  # Instantiating module "reply_log" from file
/etc/raddb/mods-enabled/detail.log

  # Instantiating module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log

  # Instantiating module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log

  # Instantiating module "cache_eap" from file
/etc/raddb/mods-enabled/cache_eap

rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
loaded and linked

  # Instantiating module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter

reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy

  # Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter

reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy

  # Instantiating module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter

reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject

  # Instantiating module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter

reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge

  # Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter

reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response

  # Instantiating module "preprocess" from file
/etc/raddb/mods-enabled/preprocess

reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups

reading pairlist file /etc/raddb/mods-config/preprocess/hints

  # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail

  # Instantiating module "logintime" from file
/etc/raddb/mods-enabled/logintime

  # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap

   # Linked to sub-module rlm_eap_gtc

   gtc {

               challenge = "Password: "

               auth_type = "PAP"

   }

   # Linked to sub-module rlm_eap_ttls

   ttls {

               tls = "tls-common"

               default_eap_type = "md5"

               copy_request_to_tunnel = yes

               use_tunneled_reply = no

               virtual_server = "inner-tunnel"

               include_length = yes

               require_client_cert = no

   }

   tls-config tls-common {

               verify_depth = 0

               ca_path = "/etc/raddb/certs"

               pem_file_type = yes

               private_key_file = "/etc/raddb/certs/server.key"

               certificate_file = "/etc/raddb/certs/server.pem"

               ca_file = "/etc/raddb/certs/ca.pem"

               private_key_password = <<< secret >>>

               dh_file = "/etc/raddb/certs/dh"

               fragment_size = 1024

               include_length = yes

               auto_chain = yes

               check_crl = no

               check_all_crl = no

               cipher_list = "PROFILE=SYSTEM"

               cipher_server_preference = no

               ecdh_curve = "prime256v1"

               tls_max_version = "1.2"

               tls_min_version = "1.2"

    cache {

               enable = no

               lifetime = 24

               max_entries = 255

    }

    verify {

               skip_if_ocsp_ok = no

    }

    ocsp {

               enable = yes

               override_cert_url = no

               url = http://127.0.0.1/ocsp/

               use_nonce = yes

               timeout = 0

               softfail = no

    }

   }

   # Linked to sub-module rlm_eap_peap

   peap {

               tls = "tls-common"

               default_eap_type = "mschapv2"

               copy_request_to_tunnel = no

               use_tunneled_reply = no

               proxy_tunneled_request_as_eap = yes

               virtual_server = "inner-tunnel"

               soh = no

               require_client_cert = no

   }

tls: Using cached TLS configuration from previous invocation

   # Linked to sub-module rlm_eap_mschapv2

   mschapv2 {

               with_ntdomain_hack = no

               send_error = yes

   }

  # Instantiating module "etc_passwd" from file
/etc/raddb/mods-enabled/passwd

rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no

  # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap

  # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm

  # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm

  # Instantiating module "bangpath" from file /etc/raddb/mods-enabled/realm

  # Instantiating module "realmpercent" from file
/etc/raddb/mods-enabled/realm

  # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm

  # Instantiating module "reject" from file /etc/raddb/mods-enabled/always

  # Instantiating module "fail" from file /etc/raddb/mods-enabled/always

  # Instantiating module "ok" from file /etc/raddb/mods-enabled/always

  # Instantiating module "handled" from file /etc/raddb/mods-enabled/always

  # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always

  # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always

  # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always

  # Instantiating module "noop" from file /etc/raddb/mods-enabled/always

  # Instantiating module "updated" from file /etc/raddb/mods-enabled/always

  # Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration

  # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap

rlm_mschap (mschap): using internal authentication

  # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog

  # Instantiating module "log_accounting" from file
/etc/raddb/mods-enabled/linelog

} # modules

radiusd: #### Loading Virtual Servers ####

server { # from file /etc/raddb/radiusd.conf

} # server

server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel

# Loading authenticate {...}

# Loading authorize {...}

Ignoring "sql" (see raddb/mods-available/README.rst)

Ignoring "ldap" (see raddb/mods-available/README.rst)

# Loading session {...}

# Loading post-proxy {...}

# Loading post-auth {...}

# Skipping contents of 'if' as it is always 'false' --
/etc/raddb/sites-enabled/inner-tunnel:336

} # server inner-tunnel

server default { # from file /etc/raddb/sites-enabled/default

# Loading authenticate {...}

# Loading authorize {...}

# Loading preacct {...}

# Loading accounting {...}

# Loading session {...}

# Loading post-proxy {...}

# Loading post-auth {...}

} # server default

radiusd: #### Opening IP addresses and Ports ####

listen {

               type = "auth"

               ipaddr = 127.0.0.1

               port = 18120

}

listen {

               type = "auth"

               ipv4addr = *

               port = 0

   limit {

               max_connections = 16

               lifetime = 0

               idle_timeout = 30

   }

}

listen {

               type = "acct"

               ipv4addr = *

               port = 0

   limit {

               max_connections = 16

               lifetime = 0

               idle_timeout = 30

   }

}

Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel

Listening on auth address * port 1812 bound to server default

Listening on acct address * port 1813 bound to server default

Listening on proxy address * port 56698

Ready to process requests

(0) Received Accounting-Request Id 60 from 10.100.0.50:1646 to
10.101.0.20:1813 length 285

(0)   Acct-Session-Id = "0000006A"

(0)   Cisco-AVPair = "audit-session-id=0A6400320000003BB2AB2641"

(0)   User-Name = "test"

(0)   Acct-Authentic = RADIUS

(0)   Acct-Terminate-Cause = Lost-Carrier

(0)   Cisco-AVPair = "disc-cause-ext=No Reason"

(0)   Cisco-AVPair = "connect-progress=Call Up"

(0)   Acct-Session-Time = 93

(0)   Acct-Input-Octets = 14097

(0)   Acct-Output-Octets = 19204

(0)   Acct-Input-Packets = 127

(0)   Acct-Output-Packets = 74

(0)   Acct-Status-Type = Stop

(0)   NAS-Port-Type = Ethernet

(0)   NAS-Port = 50006

(0)   NAS-Port-Id = "GigabitEthernet0/6"

(0)   Called-Station-Id = "24-01-C7-8E-84-86"

(0)   Calling-Station-Id = "74-78-27-1B-F2-78"

(0)   Service-Type = Framed-User

(0)   NAS-IP-Address = 10.100.0.50

(0)   Acct-Delay-Time = 19

(0) # Executing section preacct from file /etc/raddb/sites-enabled/default

(0)   preacct {

(0)     [preprocess] = ok

(0)     policy acct_unique {

(0)       update request {

(0)         &Tmp-String-9 := "ai:"

(0)       } # update request = noop

(0)       if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) {

(0)       EXPAND %{hex:&Class}

(0)          --> 

(0)       EXPAND ^%{hex:&Tmp-String-9}

(0)          --> ^61693a

(0)       if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i))  -> FALSE

(0)       else {

(0)         update request {

(0)           EXPAND
%{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Addres
s}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}

(0)              --> 0391b84a0867b3fc2bafaf4741bd212a

(0)           &Acct-Unique-Session-Id := 0391b84a0867b3fc2bafaf4741bd212a

(0)         } # update request = noop

(0)       } # else = noop

(0)     } # policy acct_unique = noop

(0) suffix: Checking for suffix after "@"

(0) suffix: No '@' in User-Name = "test", looking up realm NULL

(0) suffix: No such realm "NULL"

(0)     [suffix] = noop

(0)     [files] = noop

(0)   } # preacct = ok

(0) # Executing section accounting from file
/etc/raddb/sites-enabled/default

(0)   accounting {

(0) detail: EXPAND
/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addres
s}}/detail-%Y%m%d

(0) detail:    --> /var/log/radius/radacct/10.100.0.50/detail-20220725

(0) detail:
/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addres
s}}/detail-%Y%m%d expands to
/var/log/radius/radacct/10.100.0.50/detail-20220725

(0) detail: EXPAND %t

(0) detail:    --> Mon Jul 25 18:15:40 2022

(0)     [detail] = ok

(0)     [unix] = ok

(0) radutmp: EXPAND /var/log/radius/radutmp

(0) radutmp:    --> /var/log/radius/radutmp

(0) radutmp: EXPAND %{User-Name}

(0) radutmp:    --> test

(0)     [radutmp] = ok

(0) sradutmp: EXPAND /var/log/radius/sradutmp

(0) sradutmp:    --> /var/log/radius/sradutmp

(0) sradutmp: EXPAND %{User-Name}

(0) sradutmp:    --> test

(0)     [sradutmp] = ok

(0)     [exec] = noop

(0) attr_filter.accounting_response: EXPAND %{User-Name}

(0) attr_filter.accounting_response:    --> test

(0) attr_filter.accounting_response: Matched entry DEFAULT at line 12

(0)     [attr_filter.accounting_response] = updated

(0)   } # accounting = updated

(0) Sent Accounting-Response Id 60 from 10.101.0.20:1813 to 10.100.0.50:1646
length 0

(0) Finished request

(0) Cleaning up request packet ID 60 with timestamp +3

Ready to process requests

(1) Received Access-Request Id 0 from 127.0.0.1:48058 to 127.0.0.1:1812
length 142

(1)   User-Name = "anonymous_test"

(1)   NAS-IP-Address = 127.0.0.1

(1)   Calling-Station-Id = "02-00-00-00-00-01"

(1)   Framed-MTU = 1400

(1)   NAS-Port-Type = Wireless-802.11

(1)   Service-Type = Framed-User

(1)   Connect-Info = "CONNECT 11Mbps 802.11b"

(1)   EAP-Message = 0x02a1001301616e6f6e796d6f75735f74657374

(1)   Message-Authenticator = 0x63e0215c3759e15af3f8b2b777ce8370

(1) # Executing section authorize from file /etc/raddb/sites-enabled/default

(1)   authorize {

(1)     policy filter_username {

(1)       if (&User-Name) {

(1)       if (&User-Name)  -> TRUE

(1)       if (&User-Name)  {

(1)         if (&User-Name =~ / /) {

(1)         if (&User-Name =~ / /)  -> FALSE

(1)         if (&User-Name =~ /@[^@]*@/ ) {

(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(1)         if (&User-Name =~ /\.\./ ) {

(1)         if (&User-Name =~ /\.\./ )  -> FALSE

(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE

(1)         if (&User-Name =~ /\.$/)  {

(1)         if (&User-Name =~ /\.$/)   -> FALSE

(1)         if (&User-Name =~ /@\./)  {

(1)         if (&User-Name =~ /@\./)   -> FALSE

(1)       } # if (&User-Name)  = notfound

(1)     } # policy filter_username = notfound

(1)     [preprocess] = ok

(1)     [chap] = noop

(1)     [mschap] = noop

(1)     [digest] = noop

(1) suffix: Checking for suffix after "@"

(1) suffix: No '@' in User-Name = "anonymous_test", looking up realm NULL

(1) suffix: No such realm "NULL"

(1)     [suffix] = noop

(1) eap: Peer sent EAP Response (code 2) ID 161 length 19

(1) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest
of authorize

(1)     [eap] = ok

(1)   } # authorize = ok

(1) Found Auth-Type = eap

(1) # Executing group from file /etc/raddb/sites-enabled/default

(1)   Auth-Type eap {

(1) eap: Peer sent packet with method EAP Identity (1)

(1) eap: Calling submodule eap_ttls to process data

(1) eap_ttls: Initiating new TLS session

(1) eap_ttls: [eaptls start] = request

(1) eap: Sending EAP Request (code 1) ID 162 length 6

(1) eap: EAP session adding &reply:State = 0x594837c159ea227a

(1)     [eap] = handled

(1)     if (handled && (Response-Packet-Type == Access-Challenge)) {

(1)     EXPAND Response-Packet-Type

(1)        --> Access-Challenge

(1)     if (handled && (Response-Packet-Type == Access-Challenge))  -> TRUE

(1)     if (handled && (Response-Packet-Type == Access-Challenge))  {

(1) attr_filter.access_challenge: EXPAND %{User-Name}

(1) attr_filter.access_challenge:    --> anonymous_test

(1) attr_filter.access_challenge: Matched entry DEFAULT at line 12

(1)       [attr_filter.access_challenge.post-auth] = updated

(1)       [handled] = handled

(1)     } # if (handled && (Response-Packet-Type == Access-Challenge))  =
handled

(1)   } # Auth-Type eap = handled

(1) Using Post-Auth-Type Challenge

(1) # Executing group from file /etc/raddb/sites-enabled/default

(1)   Challenge { ... } # empty sub-section is ignored

(1) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:48058 length
0

(1)   EAP-Message = 0x01a200061520

(1)   Message-Authenticator = 0x00000000000000000000000000000000

(1)   State = 0x594837c159ea227a35f4296c6c550caa

(1) Finished request

Waking up in 4.9 seconds.

(2) Received Access-Request Id 1 from 127.0.0.1:48058 to 127.0.0.1:1812
length 343

(2)   User-Name = "anonymous_test"

(2)   NAS-IP-Address = 127.0.0.1

(2)   Calling-Station-Id = "02-00-00-00-00-01"

(2)   Framed-MTU = 1400

(2)   NAS-Port-Type = Wireless-802.11

(2)   Service-Type = Framed-User

(2)   Connect-Info = "CONNECT 11Mbps 802.11b"

(2)   EAP-Message =
0x02a200ca150016030100bf010000bb03037526679cd3ccd5346e9ffc32b3a61bc85036d03f
f978485f54af4c4c4713eef2000048c02cc030cca9cca8c0adc02bc02fc0acc023c027c00ac0
14c009c013009dc09d009cc09c003d003c0035002f009fccaac09f009ec09e006b0067003900
33c008c012000a001600ff0100004a000b000403000102000a000c000a001d0017001e001900
180016000000170000000d002600240403050306030807080808090804080a0805080b080604
01050106010303030102030201

(2)   State = 0x594837c159ea227a35f4296c6c550caa

(2)   Message-Authenticator = 0xa2ab78a30c2fd4c0b1e73fbaaa7c1007

(2) session-state: No cached attributes

(2) # Executing section authorize from file /etc/raddb/sites-enabled/default

(2)   authorize {

(2)     policy filter_username {

(2)       if (&User-Name) {

(2)       if (&User-Name)  -> TRUE

(2)       if (&User-Name)  {

(2)         if (&User-Name =~ / /) {

(2)         if (&User-Name =~ / /)  -> FALSE

(2)         if (&User-Name =~ /@[^@]*@/ ) {

(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(2)         if (&User-Name =~ /\.\./ ) {

(2)         if (&User-Name =~ /\.\./ )  -> FALSE

(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE

(2)         if (&User-Name =~ /\.$/)  {

(2)         if (&User-Name =~ /\.$/)   -> FALSE

(2)         if (&User-Name =~ /@\./)  {

(2)         if (&User-Name =~ /@\./)   -> FALSE

(2)       } # if (&User-Name)  = notfound

(2)     } # policy filter_username = notfound

(2)     [preprocess] = ok

(2)     [chap] = noop

(2)     [mschap] = noop

(2)     [digest] = noop

(2) suffix: Checking for suffix after "@"

(2) suffix: No '@' in User-Name = "anonymous_test", looking up realm NULL

(2) suffix: No such realm "NULL"

(2)     [suffix] = noop

(2) eap: Peer sent EAP Response (code 2) ID 162 length 202

(2) eap: Continuing tunnel setup

(2)     [eap] = ok

(2)   } # authorize = ok

(2) Found Auth-Type = eap

(2) # Executing group from file /etc/raddb/sites-enabled/default

(2)   Auth-Type eap {

(2) eap: Expiring EAP session with state 0x594837c159ea227a

(2) eap: Finished EAP session with state 0x594837c159ea227a

(2) eap: Previous EAP request found for state 0x594837c159ea227a, released
from the list

(2) eap: Peer sent packet with method EAP TTLS (21)

(2) eap: Calling submodule eap_ttls to process data

(2) eap_ttls: Authenticate

(2) eap_ttls: Continuing EAP-TLS

(2) eap_ttls: Got final TLS record fragment (196 bytes)

(2) eap_ttls: WARNING: Total received TLS record fragments (196 bytes), does
not equal indicated TLS record length (0 bytes)

(2) eap_ttls: [eaptls verify] = ok

(2) eap_ttls: Done initial handshake

(2) eap_ttls: (other): before SSL initialization

(2) eap_ttls: TLS_accept: before SSL initialization

(2) eap_ttls: TLS_accept: before SSL initialization

(2) eap_ttls: <<< recv TLS 1.3  [length 00bf] 

(2) eap_ttls: TLS_accept: SSLv3/TLS read client hello

(2) eap_ttls: >>> send TLS 1.2  [length 003d] 

(2) eap_ttls: TLS_accept: SSLv3/TLS write server hello

(2) eap_ttls: >>> send TLS 1.2  [length 08e9] 

(2) eap_ttls: TLS_accept: SSLv3/TLS write certificate

(2) eap_ttls: >>> send TLS 1.2  [length 014d] 

(2) eap_ttls: TLS_accept: SSLv3/TLS write key exchange

(2) eap_ttls: >>> send TLS 1.2  [length 0004] 

(2) eap_ttls: TLS_accept: SSLv3/TLS write server done

(2) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server
done

(2) eap_ttls: TLS - In Handshake Phase

(2) eap_ttls: TLS - got 2699 bytes of data

(2) eap_ttls: [eaptls process] = handled

(2) eap: Sending EAP Request (code 1) ID 163 length 1014

(2) eap: EAP session adding &reply:State = 0x594837c158eb227a

(2)     [eap] = handled

(2)     if (handled && (Response-Packet-Type == Access-Challenge)) {

(2)     EXPAND Response-Packet-Type

(2)        --> Access-Challenge

(2)     if (handled && (Response-Packet-Type == Access-Challenge))  -> TRUE

(2)     if (handled && (Response-Packet-Type == Access-Challenge))  {

(2) attr_filter.access_challenge: EXPAND %{User-Name}

(2) attr_filter.access_challenge:    --> anonymous_test

(2) attr_filter.access_challenge: Matched entry DEFAULT at line 12

(2)       [attr_filter.access_challenge.post-auth] = updated

(2)       [handled] = handled

(2)     } # if (handled && (Response-Packet-Type == Access-Challenge))  =
handled

(2)   } # Auth-Type eap = handled

(2) Using Post-Auth-Type Challenge

(2) # Executing group from file /etc/raddb/sites-enabled/default

(2)   Challenge { ... } # empty sub-section is ignored

(2) Sent Access-Challenge Id 1 from 127.0.0.1:1812 to 127.0.0.1:48058 length
0

(2)   EAP-Message =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(2)   Message-Authenticator = 0x00000000000000000000000000000000

(2)   State = 0x594837c158eb227a35f4296c6c550caa

(2) Finished request

Waking up in 4.9 seconds.

(3) Received Access-Request Id 2 from 127.0.0.1:48058 to 127.0.0.1:1812
length 147

(3)   User-Name = "anonymous_test"

(3)   NAS-IP-Address = 127.0.0.1

(3)   Calling-Station-Id = "02-00-00-00-00-01"

(3)   Framed-MTU = 1400

(3)   NAS-Port-Type = Wireless-802.11

(3)   Service-Type = Framed-User

(3)   Connect-Info = "CONNECT 11Mbps 802.11b"

(3)   EAP-Message = 0x02a300061500

(3)   State = 0x594837c158eb227a35f4296c6c550caa

(3)   Message-Authenticator = 0x0281d393c2571ae6091802af7143b0ed

(3) session-state: No cached attributes

(3) # Executing section authorize from file /etc/raddb/sites-enabled/default

(3)   authorize {

(3)     policy filter_username {

(3)       if (&User-Name) {

(3)       if (&User-Name)  -> TRUE

(3)       if (&User-Name)  {

(3)         if (&User-Name =~ / /) {

(3)         if (&User-Name =~ / /)  -> FALSE

(3)         if (&User-Name =~ /@[^@]*@/ ) {

(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(3)         if (&User-Name =~ /\.\./ ) {

(3)         if (&User-Name =~ /\.\./ )  -> FALSE

(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE

(3)         if (&User-Name =~ /\.$/)  {

(3)         if (&User-Name =~ /\.$/)   -> FALSE

(3)         if (&User-Name =~ /@\./)  {

(3)         if (&User-Name =~ /@\./)   -> FALSE

(3)       } # if (&User-Name)  = notfound

(3)     } # policy filter_username = notfound

(3)     [preprocess] = ok

(3)     [chap] = noop

(3)     [mschap] = noop

(3)     [digest] = noop

(3) suffix: Checking for suffix after "@"

(3) suffix: No '@' in User-Name = "anonymous_test", looking up realm NULL

(3) suffix: No such realm "NULL"

(3)     [suffix] = noop

(3) eap: Peer sent EAP Response (code 2) ID 163 length 6

(3) eap: Continuing tunnel setup

(3)     [eap] = ok

(3)   } # authorize = ok

(3) Found Auth-Type = eap

(3) # Executing group from file /etc/raddb/sites-enabled/default

(3)   Auth-Type eap {

(3) eap: Expiring EAP session with state 0x594837c158eb227a

(3) eap: Finished EAP session with state 0x594837c158eb227a

(3) eap: Previous EAP request found for state 0x594837c158eb227a, released
from the list

(3) eap: Peer sent packet with method EAP TTLS (21)

(3) eap: Calling submodule eap_ttls to process data

(3) eap_ttls: Authenticate

(3) eap_ttls: Continuing EAP-TLS

(3) eap_ttls: Peer ACKed our handshake fragment

(3) eap_ttls: [eaptls verify] = request

(3) eap_ttls: [eaptls process] = handled

(3) eap: Sending EAP Request (code 1) ID 164 length 1014

(3) eap: EAP session adding &reply:State = 0x594837c15bec227a

(3)     [eap] = handled

(3)     if (handled && (Response-Packet-Type == Access-Challenge)) {

(3)     EXPAND Response-Packet-Type

(3)        --> Access-Challenge

(3)     if (handled && (Response-Packet-Type == Access-Challenge))  -> TRUE

(3)     if (handled && (Response-Packet-Type == Access-Challenge))  {

(3) attr_filter.access_challenge: EXPAND %{User-Name}

(3) attr_filter.access_challenge:    --> anonymous_test

(3) attr_filter.access_challenge: Matched entry DEFAULT at line 12

(3)       [attr_filter.access_challenge.post-auth] = updated

(3)       [handled] = handled

(3)     } # if (handled && (Response-Packet-Type == Access-Challenge))  =
handled

(3)   } # Auth-Type eap = handled

(3) Using Post-Auth-Type Challenge

(3) # Executing group from file /etc/raddb/sites-enabled/default

(3)   Challenge { ... } # empty sub-section is ignored

(3) Sent Access-Challenge Id 2 from 127.0.0.1:1812 to 127.0.0.1:48058 length
0

(3)   EAP-Message =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(3)   Message-Authenticator = 0x00000000000000000000000000000000

(3)   State = 0x594837c15bec227a35f4296c6c550caa

(3) Finished request

Waking up in 4.9 seconds.

(4) Received Access-Request Id 3 from 127.0.0.1:48058 to 127.0.0.1:1812
length 147

(4)   User-Name = "anonymous_test"

(4)   NAS-IP-Address = 127.0.0.1

(4)   Calling-Station-Id = "02-00-00-00-00-01"

(4)   Framed-MTU = 1400

(4)   NAS-Port-Type = Wireless-802.11

(4)   Service-Type = Framed-User

(4)   Connect-Info = "CONNECT 11Mbps 802.11b"

(4)   EAP-Message = 0x02a400061500

(4)   State = 0x594837c15bec227a35f4296c6c550caa

(4)   Message-Authenticator = 0x12aad93ece4c588ec719216bbaecd7fb

(4) session-state: No cached attributes

(4) # Executing section authorize from file /etc/raddb/sites-enabled/default

(4)   authorize {

(4)     policy filter_username {

(4)       if (&User-Name) {

(4)       if (&User-Name)  -> TRUE

(4)       if (&User-Name)  {

(4)         if (&User-Name =~ / /) {

(4)         if (&User-Name =~ / /)  -> FALSE

(4)         if (&User-Name =~ /@[^@]*@/ ) {

(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(4)         if (&User-Name =~ /\.\./ ) {

(4)         if (&User-Name =~ /\.\./ )  -> FALSE

(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE

(4)         if (&User-Name =~ /\.$/)  {

(4)         if (&User-Name =~ /\.$/)   -> FALSE

(4)         if (&User-Name =~ /@\./)  {

(4)         if (&User-Name =~ /@\./)   -> FALSE

(4)       } # if (&User-Name)  = notfound

(4)     } # policy filter_username = notfound

(4)     [preprocess] = ok

(4)     [chap] = noop

(4)     [mschap] = noop

(4)     [digest] = noop

(4) suffix: Checking for suffix after "@"

(4) suffix: No '@' in User-Name = "anonymous_test", looking up realm NULL

(4) suffix: No such realm "NULL"

(4)     [suffix] = noop

(4) eap: Peer sent EAP Response (code 2) ID 164 length 6

(4) eap: Continuing tunnel setup

(4)     [eap] = ok

(4)   } # authorize = ok

(4) Found Auth-Type = eap

(4) # Executing group from file /etc/raddb/sites-enabled/default

(4)   Auth-Type eap {

(4) eap: Expiring EAP session with state 0x594837c15bec227a

(4) eap: Finished EAP session with state 0x594837c15bec227a

(4) eap: Previous EAP request found for state 0x594837c15bec227a, released
from the list

(4) eap: Peer sent packet with method EAP TTLS (21)

(4) eap: Calling submodule eap_ttls to process data

(4) eap_ttls: Authenticate

(4) eap_ttls: Continuing EAP-TLS

(4) eap_ttls: Peer ACKed our handshake fragment

(4) eap_ttls: [eaptls verify] = request

(4) eap_ttls: [eaptls process] = handled

(4) eap: Sending EAP Request (code 1) ID 165 length 701

(4) eap: EAP session adding &reply:State = 0x594837c15aed227a

(4)     [eap] = handled

(4)     if (handled && (Response-Packet-Type == Access-Challenge)) {

(4)     EXPAND Response-Packet-Type

(4)        --> Access-Challenge

(4)     if (handled && (Response-Packet-Type == Access-Challenge))  -> TRUE

(4)     if (handled && (Response-Packet-Type == Access-Challenge))  {

(4) attr_filter.access_challenge: EXPAND %{User-Name}

(4) attr_filter.access_challenge:    --> anonymous_test

(4) attr_filter.access_challenge: Matched entry DEFAULT at line 12

(4)       [attr_filter.access_challenge.post-auth] = updated

(4)       [handled] = handled

(4)     } # if (handled && (Response-Packet-Type == Access-Challenge))  =
handled

(4)   } # Auth-Type eap = handled

(4) Using Post-Auth-Type Challenge

(4) # Executing group from file /etc/raddb/sites-enabled/default

(4)   Challenge { ... } # empty sub-section is ignored

(4) Sent Access-Challenge Id 3 from 127.0.0.1:1812 to 127.0.0.1:48058 length
0

(4)   EAP-Message =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(4)   Message-Authenticator = 0x00000000000000000000000000000000

(4)   State = 0x594837c15aed227a35f4296c6c550caa

(4) Finished request

Waking up in 4.9 seconds.

(5) Received Access-Request Id 4 from 127.0.0.1:48058 to 127.0.0.1:1812
length 273

(5)   User-Name = "anonymous_test"

(5)   NAS-IP-Address = 127.0.0.1

(5)   Calling-Station-Id = "02-00-00-00-00-01"

(5)   Framed-MTU = 1400

(5)   NAS-Port-Type = Wireless-802.11

(5)   Service-Type = Framed-User

(5)   Connect-Info = "CONNECT 11Mbps 802.11b"

(5)   EAP-Message =
0x02a500841500160303004610000042410490f5fd271b8155492b8cd225df9a917c58da15b7
53f67fd3321719ee5bc61ec5d7dcc4344910224de589c074295c7725827083aa2533f613f392
603ac84822891403030001011603030028297482347c2337f8e1cd6ab9e31cc6bcb3d37932cb
7cf4dbf7e728729f98c928414c9b895270d9c5

(5)   State = 0x594837c15aed227a35f4296c6c550caa

(5)   Message-Authenticator = 0xdbe58d4e8258b430621002f6a1cde860

(5) session-state: No cached attributes

(5) # Executing section authorize from file /etc/raddb/sites-enabled/default

(5)   authorize {

(5)     policy filter_username {

(5)       if (&User-Name) {

(5)       if (&User-Name)  -> TRUE

(5)       if (&User-Name)  {

(5)         if (&User-Name =~ / /) {

(5)         if (&User-Name =~ / /)  -> FALSE

(5)         if (&User-Name =~ /@[^@]*@/ ) {

(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(5)         if (&User-Name =~ /\.\./ ) {

(5)         if (&User-Name =~ /\.\./ )  -> FALSE

(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE

(5)         if (&User-Name =~ /\.$/)  {

(5)         if (&User-Name =~ /\.$/)   -> FALSE

(5)         if (&User-Name =~ /@\./)  {

(5)         if (&User-Name =~ /@\./)   -> FALSE

(5)       } # if (&User-Name)  = notfound

(5)     } # policy filter_username = notfound

(5)     [preprocess] = ok

(5)     [chap] = noop

(5)     [mschap] = noop

(5)     [digest] = noop

(5) suffix: Checking for suffix after "@"

(5) suffix: No '@' in User-Name = "anonymous_test", looking up realm NULL

(5) suffix: No such realm "NULL"

(5)     [suffix] = noop

(5) eap: Peer sent EAP Response (code 2) ID 165 length 132

(5) eap: Continuing tunnel setup

(5)     [eap] = ok

(5)   } # authorize = ok

(5) Found Auth-Type = eap

(5) # Executing group from file /etc/raddb/sites-enabled/default

(5)   Auth-Type eap {

(5) eap: Expiring EAP session with state 0x594837c15aed227a

(5) eap: Finished EAP session with state 0x594837c15aed227a

(5) eap: Previous EAP request found for state 0x594837c15aed227a, released
from the list

(5) eap: Peer sent packet with method EAP TTLS (21)

(5) eap: Calling submodule eap_ttls to process data

(5) eap_ttls: Authenticate

(5) eap_ttls: Continuing EAP-TLS

(5) eap_ttls: [eaptls verify] = ok

(5) eap_ttls: Done initial handshake

(5) eap_ttls: TLS_accept: SSLv3/TLS write server done

(5) eap_ttls: <<< recv TLS 1.2  [length 0046] 

(5) eap_ttls: TLS_accept: SSLv3/TLS read client key exchange

(5) eap_ttls: TLS_accept: SSLv3/TLS read change cipher spec

(5) eap_ttls: <<< recv TLS 1.2  [length 0010] 

(5) eap_ttls: TLS_accept: SSLv3/TLS read finished

(5) eap_ttls: >>> send TLS 1.2  [length 0001] 

(5) eap_ttls: TLS_accept: SSLv3/TLS write change cipher spec

(5) eap_ttls: >>> send TLS 1.2  [length 0010] 

(5) eap_ttls: TLS_accept: SSLv3/TLS write finished

(5) eap_ttls: (other): SSL negotiation finished successfully

(5) eap_ttls: TLS - Connection Established

(5) eap_ttls: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"

(5) eap_ttls: TLS-Session-Version = "TLS 1.2"

(5) eap_ttls: TLS - got 51 bytes of data

(5) eap_ttls: [eaptls process] = handled

(5) eap: Sending EAP Request (code 1) ID 166 length 61

(5) eap: EAP session adding &reply:State = 0x594837c15dee227a

(5)     [eap] = handled

(5)     if (handled && (Response-Packet-Type == Access-Challenge)) {

(5)     EXPAND Response-Packet-Type

(5)        --> Access-Challenge

(5)     if (handled && (Response-Packet-Type == Access-Challenge))  -> TRUE

(5)     if (handled && (Response-Packet-Type == Access-Challenge))  {

(5) attr_filter.access_challenge: EXPAND %{User-Name}

(5) attr_filter.access_challenge:    --> anonymous_test

(5) attr_filter.access_challenge: Matched entry DEFAULT at line 12

(5)       [attr_filter.access_challenge.post-auth] = updated

(5)       [handled] = handled

(5)     } # if (handled && (Response-Packet-Type == Access-Challenge))  =
handled

(5)   } # Auth-Type eap = handled

(5) Using Post-Auth-Type Challenge

(5) # Executing group from file /etc/raddb/sites-enabled/default

(5)   Challenge { ... } # empty sub-section is ignored

(5) session-state: Saving cached attributes

(5)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"

(5)   TLS-Session-Version = "TLS 1.2"

(5) Sent Access-Challenge Id 4 from 127.0.0.1:1812 to 127.0.0.1:48058 length
0

(5)   EAP-Message =
0x01a6003d158000000033140303000101160303002868a7ea5e693524f968d02ec14fd7cb5a
629fbd3ff3d28e4a1fee62533733003052e86c7f2303bc2c

(5)   Message-Authenticator = 0x00000000000000000000000000000000

(5)   State = 0x594837c15dee227a35f4296c6c550caa

(5) Finished request

Waking up in 4.9 seconds.

(6) Received Access-Request Id 5 from 127.0.0.1:48058 to 127.0.0.1:1812
length 212

(6)   User-Name = "anonymous_test"

(6)   NAS-IP-Address = 127.0.0.1

(6)   Calling-Station-Id = "02-00-00-00-00-01"

(6)   Framed-MTU = 1400

(6)   NAS-Port-Type = Wireless-802.11

(6)   Service-Type = Framed-User

(6)   Connect-Info = "CONNECT 11Mbps 802.11b"

(6)   EAP-Message =
0x02a600471500170303003c297482347c2337f99ae8244b354c6918951f0f3bde4cd3a1631f
568103bb1527d53de82d2d036cc96b994d91266bfc523eab035954577cc893219d7c

(6)   State = 0x594837c15dee227a35f4296c6c550caa

(6)   Message-Authenticator = 0x6aa1c90905881534f18620852003faf3

(6) Restoring &session-state

(6)   &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"

(6)   &session-state:TLS-Session-Version = "TLS 1.2"

(6) # Executing section authorize from file /etc/raddb/sites-enabled/default

(6)   authorize {

(6)     policy filter_username {

(6)       if (&User-Name) {

(6)       if (&User-Name)  -> TRUE

(6)       if (&User-Name)  {

(6)         if (&User-Name =~ / /) {

(6)         if (&User-Name =~ / /)  -> FALSE

(6)         if (&User-Name =~ /@[^@]*@/ ) {

(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(6)         if (&User-Name =~ /\.\./ ) {

(6)         if (&User-Name =~ /\.\./ )  -> FALSE

(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE

(6)         if (&User-Name =~ /\.$/)  {

(6)         if (&User-Name =~ /\.$/)   -> FALSE

(6)         if (&User-Name =~ /@\./)  {

(6)         if (&User-Name =~ /@\./)   -> FALSE

(6)       } # if (&User-Name)  = notfound

(6)     } # policy filter_username = notfound

(6)     [preprocess] = ok

(6)     [chap] = noop

(6)     [mschap] = noop

(6)     [digest] = noop

(6) suffix: Checking for suffix after "@"

(6) suffix: No '@' in User-Name = "anonymous_test", looking up realm NULL

(6) suffix: No such realm "NULL"

(6)     [suffix] = noop

(6) eap: Peer sent EAP Response (code 2) ID 166 length 71

(6) eap: Continuing tunnel setup

(6)     [eap] = ok

(6)   } # authorize = ok

(6) Found Auth-Type = eap

(6) # Executing group from file /etc/raddb/sites-enabled/default

(6)   Auth-Type eap {

(6) eap: Expiring EAP session with state 0x594837c15dee227a

(6) eap: Finished EAP session with state 0x594837c15dee227a

(6) eap: Previous EAP request found for state 0x594837c15dee227a, released
from the list

(6) eap: Peer sent packet with method EAP TTLS (21)

(6) eap: Calling submodule eap_ttls to process data

(6) eap_ttls: Authenticate

(6) eap_ttls: Continuing EAP-TLS

(6) eap_ttls: [eaptls verify] = ok

(6) eap_ttls: Done initial handshake

(6) eap_ttls: [eaptls process] = ok

(6) eap_ttls: Session established.  Proceeding to decode tunneled attributes

(6) eap_ttls: Got tunneled request

(6) eap_ttls:   User-Name = "test"

(6) eap_ttls:   User-Password = "testing"

(6) eap_ttls:   FreeRADIUS-Proxied-To = 127.0.0.1

(6) eap_ttls: Sending tunneled request

(6) Virtual server inner-tunnel received request

(6)   User-Name = "test"

(6)   User-Password = "testing"

(6)   FreeRADIUS-Proxied-To = 127.0.0.1

(6)   NAS-IP-Address = 127.0.0.1

(6)   Calling-Station-Id = "02-00-00-00-00-01"

(6)   Framed-MTU = 1400

(6)   NAS-Port-Type = Wireless-802.11

(6)   Service-Type = Framed-User

(6)   Connect-Info = "CONNECT 11Mbps 802.11b"

(6)   Event-Timestamp = "Jul 25 2022 18:15:48 CEST"

(6) server inner-tunnel {

(6)   # Executing section authorize from file
/etc/raddb/sites-enabled/inner-tunnel

(6)     authorize {

(6)       policy filter_username {

(6)         if (&User-Name) {

(6)         if (&User-Name)  -> TRUE

(6)         if (&User-Name)  {

(6)           if (&User-Name =~ / /) {

(6)           if (&User-Name =~ / /)  -> FALSE

(6)           if (&User-Name =~ /@[^@]*@/ ) {

(6)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(6)           if (&User-Name =~ /\.\./ ) {

(6)           if (&User-Name =~ /\.\./ )  -> FALSE

(6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE

(6)           if (&User-Name =~ /\.$/)  {

(6)           if (&User-Name =~ /\.$/)   -> FALSE

(6)           if (&User-Name =~ /@\./)  {

(6)           if (&User-Name =~ /@\./)   -> FALSE

(6)         } # if (&User-Name)  = notfound

(6)       } # policy filter_username = notfound

(6)       [chap] = noop

(6)       [mschap] = noop

(6) suffix: Checking for suffix after "@"

(6) suffix: No '@' in User-Name = "test", looking up realm NULL

(6) suffix: No such realm "NULL"

(6)       [suffix] = noop

(6)       update control {

(6)         &Proxy-To-Realm := LOCAL

(6)       } # update control = noop

(6) eap: No EAP-Message, not doing EAP

(6)       [eap] = noop

(6) files: users: Matched entry test at line 1

(6) files: EXPAND tu as reussi avec %{Auth-Type} et en etant %{User-Name}

(6) files:    --> tu as reussi avec  et en etant test

(6)       [files] = ok

(6)       [expiration] = noop

(6)       [logintime] = noop

(6)       [pap] = updated

(6)     } # authorize = updated

(6)   Found Auth-Type = PAP

(6)   # Executing group from file /etc/raddb/sites-enabled/inner-tunnel

(6)     Auth-Type PAP {

(6) pap: Login attempt with password

(6) pap: Comparing with "known good" Cleartext-Password

(6) pap: User authenticated successfully

(6)       [pap] = ok

(6)     } # Auth-Type PAP = ok

(6)   # Executing section post-auth from file
/etc/raddb/sites-enabled/inner-tunnel

(6)     post-auth {

(6)       if (0) {

(6)       if (0)  -> FALSE

(6)     } # post-auth = noop

(6)   Login OK: [test] (from client localhost port 0 cli 02-00-00-00-00-01
via TLS tunnel)

(6) } # server inner-tunnel

(6) Virtual server sending reply

(6)   Reply-Message = "tu as reussi avec  et en etant test"

(6) eap_ttls: Got tunneled Access-Accept

(6) eap: Sending EAP Success (code 3) ID 166 length 4

(6) eap: Freeing handler

(6)     [eap] = ok

(6)     if (handled && (Response-Packet-Type == Access-Challenge)) {

(6)     if (handled && (Response-Packet-Type == Access-Challenge))  -> FALSE

(6)   } # Auth-Type eap = ok

(6) # Executing section post-auth from file /etc/raddb/sites-enabled/default

(6)   post-auth {

(6)     if (session-state:User-Name && reply:User-Name && request:User-Name
&& (reply:User-Name == request:User-Name)) {

(6)     if (session-state:User-Name && reply:User-Name && request:User-Name
&& (reply:User-Name == request:User-Name))  -> FALSE

(6)     update {

(6)       &reply::TLS-Session-Cipher-Suite +=
&session-state:TLS-Session-Cipher-Suite[*] -> 'ECDHE-RSA-AES256-GCM-SHA384'

(6)       &reply::TLS-Session-Version +=
&session-state:TLS-Session-Version[*] -> 'TLS 1.2'

(6)     } # update = noop

(6)     [exec] = noop

(6)     policy remove_reply_message_if_eap {

(6)       if (&reply:EAP-Message && &reply:Reply-Message) {

(6)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE

(6)       else {

(6)         [noop] = noop

(6)       } # else = noop

(6)     } # policy remove_reply_message_if_eap = noop

(6)   } # post-auth = noop

(6) Login OK: [anonymous_test] (from client localhost port 0 cli
02-00-00-00-00-01)

(6) Sent Access-Accept Id 5 from 127.0.0.1:1812 to 127.0.0.1:48058 length 0

(6)   MS-MPPE-Recv-Key =
0xe14135f14a872f650673a7f048b96e42d97e94269c4c9c764cc8957057a9f70a

(6)   MS-MPPE-Send-Key =
0x196c96bc3d4308ae0bd2fe7ba2292a4008232c68960bbc67658a13bb966e74fd

(6)   EAP-Message = 0x03a60004

(6)   Message-Authenticator = 0x00000000000000000000000000000000

(6)   User-Name = "anonymous_test"

(6) Finished request

Waking up in 4.9 seconds.

(1) Cleaning up request packet ID 0 with timestamp +11

(2) Cleaning up request packet ID 1 with timestamp +11

(3) Cleaning up request packet ID 2 with timestamp +11

(4) Cleaning up request packet ID 3 with timestamp +11

(5) Cleaning up request packet ID 4 with timestamp +11

(6) Cleaning up request packet ID 5 with timestamp +11

Ready to process requests

(7) Received Access-Request Id 181 from 10.100.0.50:1645 to 10.101.0.20:1812
length 204

(7)   User-Name = "anonymous"

(7)   Service-Type = Framed-User

(7)   Framed-MTU = 1500

(7)   Called-Station-Id = "24-01-C7-8E-84-86"

(7)   Calling-Station-Id = "74-78-27-1B-F2-78"

(7)   EAP-Message = 0x0201000e01616e6f6e796d6f7573

(7)   Message-Authenticator = 0x55c09e83405ccf67b9c08d1e70ac4b1d

(7)   Cisco-AVPair = "audit-session-id=0A6400320000003DB2AD4898"

(7)   NAS-Port-Type = Ethernet

(7)   NAS-Port = 50006

(7)   NAS-Port-Id = "GigabitEthernet0/6"

(7)   NAS-IP-Address = 10.100.0.50

(7) # Executing section authorize from file /etc/raddb/sites-enabled/default

(7)   authorize {

(7)     policy filter_username {

(7)       if (&User-Name) {

(7)       if (&User-Name)  -> TRUE

(7)       if (&User-Name)  {

(7)         if (&User-Name =~ / /) {

(7)         if (&User-Name =~ / /)  -> FALSE

(7)         if (&User-Name =~ /@[^@]*@/ ) {

(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(7)         if (&User-Name =~ /\.\./ ) {

(7)         if (&User-Name =~ /\.\./ )  -> FALSE

(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE

(7)         if (&User-Name =~ /\.$/)  {

(7)         if (&User-Name =~ /\.$/)   -> FALSE

(7)         if (&User-Name =~ /@\./)  {

(7)         if (&User-Name =~ /@\./)   -> FALSE

(7)       } # if (&User-Name)  = notfound

(7)     } # policy filter_username = notfound

(7)     [preprocess] = ok

(7)     [chap] = noop

(7)     [mschap] = noop

(7)     [digest] = noop

(7) suffix: Checking for suffix after "@"

(7) suffix: No '@' in User-Name = "anonymous", looking up realm NULL

(7) suffix: No such realm "NULL"

(7)     [suffix] = noop

(7) eap: Peer sent EAP Response (code 2) ID 1 length 14

(7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest
of authorize

(7)     [eap] = ok

(7)   } # authorize = ok

(7) Found Auth-Type = eap

(7) # Executing group from file /etc/raddb/sites-enabled/default

(7)   Auth-Type eap {

(7) eap: Peer sent packet with method EAP Identity (1)

(7) eap: Calling submodule eap_ttls to process data

(7) eap_ttls: Initiating new TLS session

(7) eap_ttls: [eaptls start] = request

(7) eap: Sending EAP Request (code 1) ID 2 length 6

(7) eap: EAP session adding &reply:State = 0x1aff00fb1afd150b

(7)     [eap] = handled

(7)     if (handled && (Response-Packet-Type == Access-Challenge)) {

(7)     EXPAND Response-Packet-Type

(7)        --> Access-Challenge

(7)     if (handled && (Response-Packet-Type == Access-Challenge))  -> TRUE

(7)     if (handled && (Response-Packet-Type == Access-Challenge))  {

(7) attr_filter.access_challenge: EXPAND %{User-Name}

(7) attr_filter.access_challenge:    --> anonymous

(7) attr_filter.access_challenge: Matched entry DEFAULT at line 12

(7)       [attr_filter.access_challenge.post-auth] = updated

(7)       [handled] = handled

(7)     } # if (handled && (Response-Packet-Type == Access-Challenge))  =
handled

(7)   } # Auth-Type eap = handled

(7) Using Post-Auth-Type Challenge

(7) # Executing group from file /etc/raddb/sites-enabled/default

(7)   Challenge { ... } # empty sub-section is ignored

(7) Sent Access-Challenge Id 181 from 10.101.0.20:1812 to 10.100.0.50:1645
length 0

(7)   EAP-Message = 0x010200061520

(7)   Message-Authenticator = 0x00000000000000000000000000000000

(7)   State = 0x1aff00fb1afd150bdec157b3b6aa7742

(7) Finished request

Waking up in 4.9 seconds.

(8) Received Access-Request Id 182 from 10.100.0.50:1645 to 10.101.0.20:1812
length 380

(8)   User-Name = "anonymous"

(8)   Service-Type = Framed-User

(8)   Framed-MTU = 1500

(8)   Called-Station-Id = "24-01-C7-8E-84-86"

(8)   Calling-Station-Id = "74-78-27-1B-F2-78"

(8)   EAP-Message =
0x020200ac1580000000a2160303009d01000099030362dec1cb4de29748aa3f666036d19548
5065509be2151045e5ff5ad25a8dc96f00002ac02cc02bc030c02f009f009ec024c023c028c0
27c00ac009c014c013009d009c003d003c0035002f000a01000046000500050100000000000a
00080006001d00170018000b00020100000d001a001808040805080604010501020104030503
02030202060106030023000000170000ff01000100

(8)   Message-Authenticator = 0xf4be43381cba5bcb881815edb82aaedc

(8)   Cisco-AVPair = "audit-session-id=0A6400320000003DB2AD4898"

(8)   NAS-Port-Type = Ethernet

(8)   NAS-Port = 50006

(8)   NAS-Port-Id = "GigabitEthernet0/6"

(8)   State = 0x1aff00fb1afd150bdec157b3b6aa7742

(8)   NAS-IP-Address = 10.100.0.50

(8) session-state: No cached attributes

(8) # Executing section authorize from file /etc/raddb/sites-enabled/default

(8)   authorize {

(8)     policy filter_username {

(8)       if (&User-Name) {

(8)       if (&User-Name)  -> TRUE

(8)       if (&User-Name)  {

(8)         if (&User-Name =~ / /) {

(8)         if (&User-Name =~ / /)  -> FALSE

(8)         if (&User-Name =~ /@[^@]*@/ ) {

(8)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(8)         if (&User-Name =~ /\.\./ ) {

(8)         if (&User-Name =~ /\.\./ )  -> FALSE

(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE

(8)         if (&User-Name =~ /\.$/)  {

(8)         if (&User-Name =~ /\.$/)   -> FALSE

(8)         if (&User-Name =~ /@\./)  {

(8)         if (&User-Name =~ /@\./)   -> FALSE

(8)       } # if (&User-Name)  = notfound

(8)     } # policy filter_username = notfound

(8)     [preprocess] = ok

(8)     [chap] = noop

(8)     [mschap] = noop

(8)     [digest] = noop

(8) suffix: Checking for suffix after "@"

(8) suffix: No '@' in User-Name = "anonymous", looking up realm NULL

(8) suffix: No such realm "NULL"

(8)     [suffix] = noop

(8) eap: Peer sent EAP Response (code 2) ID 2 length 172

(8) eap: Continuing tunnel setup

(8)     [eap] = ok

(8)   } # authorize = ok

(8) Found Auth-Type = eap

(8) # Executing group from file /etc/raddb/sites-enabled/default

(8)   Auth-Type eap {

(8) eap: Expiring EAP session with state 0x1aff00fb1afd150b

(8) eap: Finished EAP session with state 0x1aff00fb1afd150b

(8) eap: Previous EAP request found for state 0x1aff00fb1afd150b, released
from the list

(8) eap: Peer sent packet with method EAP TTLS (21)

(8) eap: Calling submodule eap_ttls to process data

(8) eap_ttls: Authenticate

(8) eap_ttls: Continuing EAP-TLS

(8) eap_ttls: Peer indicated complete TLS record size will be 162 bytes

(8) eap_ttls: Got complete TLS record (162 bytes)

(8) eap_ttls: [eaptls verify] = length included

(8) eap_ttls: (other): before SSL initialization

(8) eap_ttls: TLS_accept: before SSL initialization

(8) eap_ttls: TLS_accept: before SSL initialization

(8) eap_ttls: <<< recv TLS 1.3  [length 009d] 

(8) eap_ttls: TLS_accept: SSLv3/TLS read client hello

(8) eap_ttls: >>> send TLS 1.2  [length 003d] 

(8) eap_ttls: TLS_accept: SSLv3/TLS write server hello

(8) eap_ttls: >>> send TLS 1.2  [length 08e9] 

(8) eap_ttls: TLS_accept: SSLv3/TLS write certificate

(8) eap_ttls: >>> send TLS 1.2  [length 014d] 

(8) eap_ttls: TLS_accept: SSLv3/TLS write key exchange

(8) eap_ttls: >>> send TLS 1.2  [length 0004] 

(8) eap_ttls: TLS_accept: SSLv3/TLS write server done

(8) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server
done

(8) eap_ttls: TLS - In Handshake Phase

(8) eap_ttls: TLS - got 2699 bytes of data

(8) eap_ttls: [eaptls process] = handled

(8) eap: Sending EAP Request (code 1) ID 3 length 1014

(8) eap: EAP session adding &reply:State = 0x1aff00fb1bfc150b

(8)     [eap] = handled

(8)     if (handled && (Response-Packet-Type == Access-Challenge)) {

(8)     EXPAND Response-Packet-Type

(8)        --> Access-Challenge

(8)     if (handled && (Response-Packet-Type == Access-Challenge))  -> TRUE

(8)     if (handled && (Response-Packet-Type == Access-Challenge))  {

(8) attr_filter.access_challenge: EXPAND %{User-Name}

(8) attr_filter.access_challenge:    --> anonymous

(8) attr_filter.access_challenge: Matched entry DEFAULT at line 12

(8)       [attr_filter.access_challenge.post-auth] = updated

(8)       [handled] = handled

(8)     } # if (handled && (Response-Packet-Type == Access-Challenge))  =
handled

(8)   } # Auth-Type eap = handled

(8) Using Post-Auth-Type Challenge

(8) # Executing group from file /etc/raddb/sites-enabled/default

(8)   Challenge { ... } # empty sub-section is ignored

(8) Sent Access-Challenge Id 182 from 10.101.0.20:1812 to 10.100.0.50:1645
length 0

(8)   EAP-Message =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(8)   Message-Authenticator = 0x00000000000000000000000000000000

(8)   State = 0x1aff00fb1bfc150bdec157b3b6aa7742

(8) Finished request

Waking up in 4.9 seconds.

(9) Received Access-Request Id 183 from 10.100.0.50:1645 to 10.101.0.20:1812
length 214

(9)   User-Name = "anonymous"

(9)   Service-Type = Framed-User

(9)   Framed-MTU = 1500

(9)   Called-Station-Id = "24-01-C7-8E-84-86"

(9)   Calling-Station-Id = "74-78-27-1B-F2-78"

(9)   EAP-Message = 0x020300061500

(9)   Message-Authenticator = 0x27fa8829f5e4cbd6c0703ff10396bd50

(9)   Cisco-AVPair = "audit-session-id=0A6400320000003DB2AD4898"

(9)   NAS-Port-Type = Ethernet

(9)   NAS-Port = 50006

(9)   NAS-Port-Id = "GigabitEthernet0/6"

(9)   State = 0x1aff00fb1bfc150bdec157b3b6aa7742

(9)   NAS-IP-Address = 10.100.0.50

(9) session-state: No cached attributes

(9) # Executing section authorize from file /etc/raddb/sites-enabled/default

(9)   authorize {

(9)     policy filter_username {

(9)       if (&User-Name) {

(9)       if (&User-Name)  -> TRUE

(9)       if (&User-Name)  {

(9)         if (&User-Name =~ / /) {

(9)         if (&User-Name =~ / /)  -> FALSE

(9)         if (&User-Name =~ /@[^@]*@/ ) {

(9)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(9)         if (&User-Name =~ /\.\./ ) {

(9)         if (&User-Name =~ /\.\./ )  -> FALSE

(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE

(9)         if (&User-Name =~ /\.$/)  {

(9)         if (&User-Name =~ /\.$/)   -> FALSE

(9)         if (&User-Name =~ /@\./)  {

(9)         if (&User-Name =~ /@\./)   -> FALSE

(9)       } # if (&User-Name)  = notfound

(9)     } # policy filter_username = notfound

(9)     [preprocess] = ok

(9)     [chap] = noop

(9)     [mschap] = noop

(9)     [digest] = noop

(9) suffix: Checking for suffix after "@"

(9) suffix: No '@' in User-Name = "anonymous", looking up realm NULL

(9) suffix: No such realm "NULL"

(9)     [suffix] = noop

(9) eap: Peer sent EAP Response (code 2) ID 3 length 6

(9) eap: Continuing tunnel setup

(9)     [eap] = ok

(9)   } # authorize = ok

(9) Found Auth-Type = eap

(9) # Executing group from file /etc/raddb/sites-enabled/default

(9)   Auth-Type eap {

(9) eap: Expiring EAP session with state 0x1aff00fb1bfc150b

(9) eap: Finished EAP session with state 0x1aff00fb1bfc150b

(9) eap: Previous EAP request found for state 0x1aff00fb1bfc150b, released
from the list

(9) eap: Peer sent packet with method EAP TTLS (21)

(9) eap: Calling submodule eap_ttls to process data

(9) eap_ttls: Authenticate

(9) eap_ttls: Continuing EAP-TLS

(9) eap_ttls: Peer ACKed our handshake fragment

(9) eap_ttls: [eaptls verify] = request

(9) eap_ttls: [eaptls process] = handled

(9) eap: Sending EAP Request (code 1) ID 4 length 1014

(9) eap: EAP session adding &reply:State = 0x1aff00fb18fb150b

(9)     [eap] = handled

(9)     if (handled && (Response-Packet-Type == Access-Challenge)) {

(9)     EXPAND Response-Packet-Type

(9)        --> Access-Challenge

(9)     if (handled && (Response-Packet-Type == Access-Challenge))  -> TRUE

(9)     if (handled && (Response-Packet-Type == Access-Challenge))  {

(9) attr_filter.access_challenge: EXPAND %{User-Name}

(9) attr_filter.access_challenge:    --> anonymous

(9) attr_filter.access_challenge: Matched entry DEFAULT at line 12

(9)       [attr_filter.access_challenge.post-auth] = updated

(9)       [handled] = handled

(9)     } # if (handled && (Response-Packet-Type == Access-Challenge))  =
handled

(9)   } # Auth-Type eap = handled

(9) Using Post-Auth-Type Challenge

(9) # Executing group from file /etc/raddb/sites-enabled/default

(9)   Challenge { ... } # empty sub-section is ignored

(9) Sent Access-Challenge Id 183 from 10.101.0.20:1812 to 10.100.0.50:1645
length 0

(9)   EAP-Message =
0x010403f615c000000a8b2191b630136f9c3efec0d255f3b83b044d67821de971742e781d91
d550b267675e88e1945d729139f9b13cb3067ea7a8cf42f22afe3ad057afe04680c0484d0dd8
62dd0004fe308204fa308203e2a00302010202142612a65a56fe11648fbdca8d519264c57b3b
83f0300d06092a864886f70d01010b0500308193310b3009060355040613024652310f300d06
035504080c065261646975733112301006035504070c09536f6d657768657265311530130603
55040a0c0c4578616d706c6520496e632e3120301e06092a864886f70d010901161161646d69
6e406578616d706c652e6f72673126302406035504030c1d4578616d706c6520436572746966
696361746520417574686f72697479301e170d3232303630373133353631355a170d32323038
30363133353631355a308193310b3009060355040613024652310f300d06035504080c065261
646975733112301006035504070c09536f6d65776865726531153013060355040a0c

(9)   Message-Authenticator = 0x00000000000000000000000000000000

(9)   State = 0x1aff00fb18fb150bdec157b3b6aa7742

(9) Finished request

Waking up in 4.9 seconds.

(10) Received Access-Request Id 184 from 10.100.0.50:1645 to
10.101.0.20:1812 length 214

(10)   User-Name = "anonymous"

(10)   Service-Type = Framed-User

(10)   Framed-MTU = 1500

(10)   Called-Station-Id = "24-01-C7-8E-84-86"

(10)   Calling-Station-Id = "74-78-27-1B-F2-78"

(10)   EAP-Message = 0x020400061500

(10)   Message-Authenticator = 0xc343c114dc97c30f335f153612ee98ba

(10)   Cisco-AVPair = "audit-session-id=0A6400320000003DB2AD4898"

(10)   NAS-Port-Type = Ethernet

(10)   NAS-Port = 50006

(10)   NAS-Port-Id = "GigabitEthernet0/6"

(10)   State = 0x1aff00fb18fb150bdec157b3b6aa7742

(10)   NAS-IP-Address = 10.100.0.50

(10) session-state: No cached attributes

(10) # Executing section authorize from file
/etc/raddb/sites-enabled/default

(10)   authorize {

(10)     policy filter_username {

(10)       if (&User-Name) {

(10)       if (&User-Name)  -> TRUE

(10)       if (&User-Name)  {

(10)         if (&User-Name =~ / /) {

(10)         if (&User-Name =~ / /)  -> FALSE

(10)         if (&User-Name =~ /@[^@]*@/ ) {

(10)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(10)         if (&User-Name =~ /\.\./ ) {

(10)         if (&User-Name =~ /\.\./ )  -> FALSE

(10)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(10)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE

(10)         if (&User-Name =~ /\.$/)  {

(10)         if (&User-Name =~ /\.$/)   -> FALSE

(10)         if (&User-Name =~ /@\./)  {

(10)         if (&User-Name =~ /@\./)   -> FALSE

(10)       } # if (&User-Name)  = notfound

(10)     } # policy filter_username = notfound

(10)     [preprocess] = ok

(10)     [chap] = noop

(10)     [mschap] = noop

(10)     [digest] = noop

(10) suffix: Checking for suffix after "@"

(10) suffix: No '@' in User-Name = "anonymous", looking up realm NULL

(10) suffix: No such realm "NULL"

(10)     [suffix] = noop

(10) eap: Peer sent EAP Response (code 2) ID 4 length 6

(10) eap: Continuing tunnel setup

(10)     [eap] = ok

(10)   } # authorize = ok

(10) Found Auth-Type = eap

(10) # Executing group from file /etc/raddb/sites-enabled/default

(10)   Auth-Type eap {

(10) eap: Expiring EAP session with state 0x1aff00fb18fb150b

(10) eap: Finished EAP session with state 0x1aff00fb18fb150b

(10) eap: Previous EAP request found for state 0x1aff00fb18fb150b, released
from the list

(10) eap: Peer sent packet with method EAP TTLS (21)

(10) eap: Calling submodule eap_ttls to process data

(10) eap_ttls: Authenticate

(10) eap_ttls: Continuing EAP-TLS

(10) eap_ttls: Peer ACKed our handshake fragment

(10) eap_ttls: [eaptls verify] = request

(10) eap_ttls: [eaptls process] = handled

(10) eap: Sending EAP Request (code 1) ID 5 length 701

(10) eap: EAP session adding &reply:State = 0x1aff00fb19fa150b

(10)     [eap] = handled

(10)     if (handled && (Response-Packet-Type == Access-Challenge)) {

(10)     EXPAND Response-Packet-Type

(10)        --> Access-Challenge

(10)     if (handled && (Response-Packet-Type == Access-Challenge))  -> TRUE

(10)     if (handled && (Response-Packet-Type == Access-Challenge))  {

(10) attr_filter.access_challenge: EXPAND %{User-Name}

(10) attr_filter.access_challenge:    --> anonymous

(10) attr_filter.access_challenge: Matched entry DEFAULT at line 12

(10)       [attr_filter.access_challenge.post-auth] = updated

(10)       [handled] = handled

(10)     } # if (handled && (Response-Packet-Type == Access-Challenge))  =
handled

(10)   } # Auth-Type eap = handled

(10) Using Post-Auth-Type Challenge

(10) # Executing group from file /etc/raddb/sites-enabled/default

(10)   Challenge { ... } # empty sub-section is ignored

(10) Sent Access-Challenge Id 184 from 10.101.0.20:1812 to 10.100.0.50:1645
length 0

(10)   EAP-Message =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(10)   Message-Authenticator = 0x00000000000000000000000000000000

(10)   State = 0x1aff00fb19fa150bdec157b3b6aa7742

(10) Finished request

Waking up in 4.8 seconds.

(11) Received Access-Request Id 185 from 10.100.0.50:1645 to
10.101.0.20:1812 length 344

(11)   User-Name = "anonymous"

(11)   Service-Type = Framed-User

(11)   Framed-MTU = 1500

(11)   Called-Station-Id = "24-01-C7-8E-84-86"

(11)   Calling-Station-Id = "74-78-27-1B-F2-78"

(11)   EAP-Message =
0x0205008815800000007e16030300461000004241041bafe37c8a64c35895a588b20bcfdef3
d2b1464ce4d5ae1c8e8e920de9406dc98f4a94b63bcd85a4cbbe35b06823f7cb4f7f6b7cb9ba
6c3f93273bbad00a32a214030300010116030300280000000000000000b2756332a6d5dece72
43e156997beb79b6e0890ac8bdf90da6ada1e3a02371ce

(11)   Message-Authenticator = 0x12631f913feb4471ab0fca288c0638f1

(11)   Cisco-AVPair = "audit-session-id=0A6400320000003DB2AD4898"

(11)   NAS-Port-Type = Ethernet

(11)   NAS-Port = 50006

(11)   NAS-Port-Id = "GigabitEthernet0/6"

(11)   State = 0x1aff00fb19fa150bdec157b3b6aa7742

(11)   NAS-IP-Address = 10.100.0.50

(11) session-state: No cached attributes

(11) # Executing section authorize from file
/etc/raddb/sites-enabled/default

(11)   authorize {

(11)     policy filter_username {

(11)       if (&User-Name) {

(11)       if (&User-Name)  -> TRUE

(11)       if (&User-Name)  {

(11)         if (&User-Name =~ / /) {

(11)         if (&User-Name =~ / /)  -> FALSE

(11)         if (&User-Name =~ /@[^@]*@/ ) {

(11)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(11)         if (&User-Name =~ /\.\./ ) {

(11)         if (&User-Name =~ /\.\./ )  -> FALSE

(11)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(11)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE

(11)         if (&User-Name =~ /\.$/)  {

(11)         if (&User-Name =~ /\.$/)   -> FALSE

(11)         if (&User-Name =~ /@\./)  {

(11)         if (&User-Name =~ /@\./)   -> FALSE

(11)       } # if (&User-Name)  = notfound

(11)     } # policy filter_username = notfound

(11)     [preprocess] = ok

(11)     [chap] = noop

(11)     [mschap] = noop

(11)     [digest] = noop

(11) suffix: Checking for suffix after "@"

(11) suffix: No '@' in User-Name = "anonymous", looking up realm NULL

(11) suffix: No such realm "NULL"

(11)     [suffix] = noop

(11) eap: Peer sent EAP Response (code 2) ID 5 length 136

(11) eap: Continuing tunnel setup

(11)     [eap] = ok

(11)   } # authorize = ok

(11) Found Auth-Type = eap

(11) # Executing group from file /etc/raddb/sites-enabled/default

(11)   Auth-Type eap {

(11) eap: Expiring EAP session with state 0x1aff00fb19fa150b

(11) eap: Finished EAP session with state 0x1aff00fb19fa150b

(11) eap: Previous EAP request found for state 0x1aff00fb19fa150b, released
from the list

(11) eap: Peer sent packet with method EAP TTLS (21)

(11) eap: Calling submodule eap_ttls to process data

(11) eap_ttls: Authenticate

(11) eap_ttls: Continuing EAP-TLS

(11) eap_ttls: Peer indicated complete TLS record size will be 126 bytes

(11) eap_ttls: Got complete TLS record (126 bytes)

(11) eap_ttls: [eaptls verify] = length included

(11) eap_ttls: TLS_accept: SSLv3/TLS write server done

(11) eap_ttls: <<< recv TLS 1.2  [length 0046] 

(11) eap_ttls: TLS_accept: SSLv3/TLS read client key exchange

(11) eap_ttls: TLS_accept: SSLv3/TLS read change cipher spec

(11) eap_ttls: <<< recv TLS 1.2  [length 0010] 

(11) eap_ttls: TLS_accept: SSLv3/TLS read finished

(11) eap_ttls: >>> send TLS 1.2  [length 0001] 

(11) eap_ttls: TLS_accept: SSLv3/TLS write change cipher spec

(11) eap_ttls: >>> send TLS 1.2  [length 0010] 

(11) eap_ttls: TLS_accept: SSLv3/TLS write finished

(11) eap_ttls: (other): SSL negotiation finished successfully

(11) eap_ttls: TLS - Connection Established

(11) eap_ttls: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"

(11) eap_ttls: TLS-Session-Version = "TLS 1.2"

(11) eap_ttls: TLS - got 51 bytes of data

(11) eap_ttls: [eaptls process] = handled

(11) eap: Sending EAP Request (code 1) ID 6 length 61

(11) eap: EAP session adding &reply:State = 0x1aff00fb1ef9150b

(11)     [eap] = handled

(11)     if (handled && (Response-Packet-Type == Access-Challenge)) {

(11)     EXPAND Response-Packet-Type

(11)        --> Access-Challenge

(11)     if (handled && (Response-Packet-Type == Access-Challenge))  -> TRUE

(11)     if (handled && (Response-Packet-Type == Access-Challenge))  {

(11) attr_filter.access_challenge: EXPAND %{User-Name}

(11) attr_filter.access_challenge:    --> anonymous

(11) attr_filter.access_challenge: Matched entry DEFAULT at line 12

(11)       [attr_filter.access_challenge.post-auth] = updated

(11)       [handled] = handled

(11)     } # if (handled && (Response-Packet-Type == Access-Challenge))  =
handled

(11)   } # Auth-Type eap = handled

(11) Using Post-Auth-Type Challenge

(11) # Executing group from file /etc/raddb/sites-enabled/default

(11)   Challenge { ... } # empty sub-section is ignored

(11) session-state: Saving cached attributes

(11)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"

(11)   TLS-Session-Version = "TLS 1.2"

(11) Sent Access-Challenge Id 185 from 10.101.0.20:1812 to 10.100.0.50:1645
length 0

(11)   EAP-Message =
0x0106003d158000000033140303000101160303002890e19eed4974783059ef0d676e70aab3
470cc68cadd1254943ddd9bbe1307ceed06dc7a28a15b4b1

(11)   Message-Authenticator = 0x00000000000000000000000000000000

(11)   State = 0x1aff00fb1ef9150bdec157b3b6aa7742

(11) Finished request

Waking up in 4.8 seconds.

(7) Cleaning up request packet ID 181 with timestamp +35

(8) Cleaning up request packet ID 182 with timestamp +35

(9) Cleaning up request packet ID 183 with timestamp +35

(10) Cleaning up request packet ID 184 with timestamp +35

(11) Cleaning up request packet ID 185 with timestamp +35

Ready to process requests

(12) Received Access-Request Id 186 from 10.100.0.50:1645 to
10.101.0.20:1812 length 194

(12)   User-Name = "test"

(12)   Service-Type = Framed-User

(12)   Framed-MTU = 1500

(12)   Called-Station-Id = "24-01-C7-8E-84-86"

(12)   Calling-Station-Id = "74-78-27-1B-F2-78"

(12)   EAP-Message = 0x020100090174657374

(12)   Message-Authenticator = 0x5064878bed8665909256b735e175b2d4

(12)   Cisco-AVPair = "audit-session-id=0A6400320000003EB2ADB5C7"

(12)   NAS-Port-Type = Ethernet

(12)   NAS-Port = 50006

(12)   NAS-Port-Id = "GigabitEthernet0/6"

(12)   NAS-IP-Address = 10.100.0.50

(12) # Executing section authorize from file
/etc/raddb/sites-enabled/default

(12)   authorize {

(12)     policy filter_username {

(12)       if (&User-Name) {

(12)       if (&User-Name)  -> TRUE

(12)       if (&User-Name)  {

(12)         if (&User-Name =~ / /) {

(12)         if (&User-Name =~ / /)  -> FALSE

(12)         if (&User-Name =~ /@[^@]*@/ ) {

(12)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(12)         if (&User-Name =~ /\.\./ ) {

(12)         if (&User-Name =~ /\.\./ )  -> FALSE

(12)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(12)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE

(12)         if (&User-Name =~ /\.$/)  {

(12)         if (&User-Name =~ /\.$/)   -> FALSE

(12)         if (&User-Name =~ /@\./)  {

(12)         if (&User-Name =~ /@\./)   -> FALSE

(12)       } # if (&User-Name)  = notfound

(12)     } # policy filter_username = notfound

(12)     [preprocess] = ok

(12)     [chap] = noop

(12)     [mschap] = noop

(12)     [digest] = noop

(12) suffix: Checking for suffix after "@"

(12) suffix: No '@' in User-Name = "test", looking up realm NULL

(12) suffix: No such realm "NULL"

(12)     [suffix] = noop

(12) eap: Peer sent EAP Response (code 2) ID 1 length 9

(12) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize

(12)     [eap] = ok

(12)   } # authorize = ok

(12) Found Auth-Type = eap

(12) # Executing group from file /etc/raddb/sites-enabled/default

(12)   Auth-Type eap {

(12) eap: Peer sent packet with method EAP Identity (1)

(12) eap: Calling submodule eap_ttls to process data

(12) eap_ttls: Initiating new TLS session

(12) eap_ttls: [eaptls start] = request

(12) eap: Sending EAP Request (code 1) ID 2 length 6

(12) eap: EAP session adding &reply:State = 0x5709dc2c570bc95d

(12)     [eap] = handled

(12)     if (handled && (Response-Packet-Type == Access-Challenge)) {

(12)     EXPAND Response-Packet-Type

(12)        --> Access-Challenge

(12)     if (handled && (Response-Packet-Type == Access-Challenge))  -> TRUE

(12)     if (handled && (Response-Packet-Type == Access-Challenge))  {

(12) attr_filter.access_challenge: EXPAND %{User-Name}

(12) attr_filter.access_challenge:    --> test

(12) attr_filter.access_challenge: Matched entry DEFAULT at line 12

(12)       [attr_filter.access_challenge.post-auth] = updated

(12)       [handled] = handled

(12)     } # if (handled && (Response-Packet-Type == Access-Challenge))  =
handled

(12)   } # Auth-Type eap = handled

(12) Using Post-Auth-Type Challenge

(12) # Executing group from file /etc/raddb/sites-enabled/default

(12)   Challenge { ... } # empty sub-section is ignored

(12) Sent Access-Challenge Id 186 from 10.101.0.20:1812 to 10.100.0.50:1645
length 0

(12)   EAP-Message = 0x010200061520

(12)   Message-Authenticator = 0x00000000000000000000000000000000

(12)   State = 0x5709dc2c570bc95d080b76220813d0d4

(12) Finished request

Waking up in 4.9 seconds.

(13) Received Access-Request Id 187 from 10.100.0.50:1645 to
10.101.0.20:1812 length 209

(13)   User-Name = "test"

(13)   Service-Type = Framed-User

(13)   Framed-MTU = 1500

(13)   Called-Station-Id = "24-01-C7-8E-84-86"

(13)   Calling-Station-Id = "74-78-27-1B-F2-78"

(13)   EAP-Message = 0x020200060319

(13)   Message-Authenticator = 0xde3e82b04cacf9575f36bb5d7da5a570

(13)   Cisco-AVPair = "audit-session-id=0A6400320000003EB2ADB5C7"

(13)   NAS-Port-Type = Ethernet

(13)   NAS-Port = 50006

(13)   NAS-Port-Id = "GigabitEthernet0/6"

(13)   State = 0x5709dc2c570bc95d080b76220813d0d4

(13)   NAS-IP-Address = 10.100.0.50

(13) session-state: No cached attributes

(13) # Executing section authorize from file
/etc/raddb/sites-enabled/default

(13)   authorize {

(13)     policy filter_username {

(13)       if (&User-Name) {

(13)       if (&User-Name)  -> TRUE

(13)       if (&User-Name)  {

(13)         if (&User-Name =~ / /) {

(13)         if (&User-Name =~ / /)  -> FALSE

(13)         if (&User-Name =~ /@[^@]*@/ ) {

(13)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(13)         if (&User-Name =~ /\.\./ ) {

(13)         if (&User-Name =~ /\.\./ )  -> FALSE

(13)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(13)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE

(13)         if (&User-Name =~ /\.$/)  {

(13)         if (&User-Name =~ /\.$/)   -> FALSE

(13)         if (&User-Name =~ /@\./)  {

(13)         if (&User-Name =~ /@\./)   -> FALSE

(13)       } # if (&User-Name)  = notfound

(13)     } # policy filter_username = notfound

(13)     [preprocess] = ok

(13)     [chap] = noop

(13)     [mschap] = noop

(13)     [digest] = noop

(13) suffix: Checking for suffix after "@"

(13) suffix: No '@' in User-Name = "test", looking up realm NULL

(13) suffix: No such realm "NULL"

(13)     [suffix] = noop

(13) eap: Peer sent EAP Response (code 2) ID 2 length 6

(13) eap: No EAP Start, assuming it's an on-going EAP conversation

(13)     [eap] = updated

(13)   } # authorize = updated

(13) Found Auth-Type = eap

(13) # Executing group from file /etc/raddb/sites-enabled/default

(13)   Auth-Type eap {

(13) eap: Expiring EAP session with state 0x1aff00fb1ef9150b

(13) eap: Finished EAP session with state 0x5709dc2c570bc95d

(13) eap: Previous EAP request found for state 0x5709dc2c570bc95d, released
from the list

(13) eap: Peer sent packet with method EAP NAK (3)

(13) eap: Found mutually acceptable type PEAP (25)

(13) eap: Calling submodule eap_peap to process data

(13) eap_peap: Initiating new TLS session

(13) eap_peap: [eaptls start] = request

(13) eap: Sending EAP Request (code 1) ID 3 length 6

(13) eap: EAP session adding &reply:State = 0x5709dc2c560ac55d

(13)     [eap] = handled

(13)     if (handled && (Response-Packet-Type == Access-Challenge)) {

(13)     EXPAND Response-Packet-Type

(13)        --> Access-Challenge

(13)     if (handled && (Response-Packet-Type == Access-Challenge))  -> TRUE

(13)     if (handled && (Response-Packet-Type == Access-Challenge))  {

(13) attr_filter.access_challenge: EXPAND %{User-Name}

(13) attr_filter.access_challenge:    --> test

(13) attr_filter.access_challenge: Matched entry DEFAULT at line 12

(13)       [attr_filter.access_challenge.post-auth] = updated

(13)       [handled] = handled

(13)     } # if (handled && (Response-Packet-Type == Access-Challenge))  =
handled

(13)   } # Auth-Type eap = handled

(13) Using Post-Auth-Type Challenge

(13) # Executing group from file /etc/raddb/sites-enabled/default

(13)   Challenge { ... } # empty sub-section is ignored

(13) Sent Access-Challenge Id 187 from 10.101.0.20:1812 to 10.100.0.50:1645
length 0

(13)   EAP-Message = 0x010300061920

(13)   Message-Authenticator = 0x00000000000000000000000000000000

(13)   State = 0x5709dc2c560ac55d080b76220813d0d4

(13) Finished request

Waking up in 4.9 seconds.

(14) Received Access-Request Id 188 from 10.100.0.50:1645 to
10.101.0.20:1812 length 375

(14)   User-Name = "test"

(14)   Service-Type = Framed-User

(14)   Framed-MTU = 1500

(14)   Called-Station-Id = "24-01-C7-8E-84-86"

(14)   Calling-Station-Id = "74-78-27-1B-F2-78"

(14)   EAP-Message =
0x020300ac1980000000a2160303009d01000099030362dec1e8bb336220b36115a2f152d4ff
bda23da4d62a4b3a3dd2d90243cfb65500002ac02cc02bc030c02f009f009ec024c023c028c0
27c00ac009c014c013009d009c003d003c0035002f000a01000046000500050100000000000a
00080006001d00170018000b00020100000d001a001808040805080604010501020104030503
02030202060106030023000000170000ff01000100

(14)   Message-Authenticator = 0x723199c45f61b638f39acfd1af4ef706

(14)   Cisco-AVPair = "audit-session-id=0A6400320000003EB2ADB5C7"

(14)   NAS-Port-Type = Ethernet

(14)   NAS-Port = 50006

(14)   NAS-Port-Id = "GigabitEthernet0/6"

(14)   State = 0x5709dc2c560ac55d080b76220813d0d4

(14)   NAS-IP-Address = 10.100.0.50

(14) session-state: No cached attributes

(14) # Executing section authorize from file
/etc/raddb/sites-enabled/default

(14)   authorize {

(14)     policy filter_username {

(14)       if (&User-Name) {

(14)       if (&User-Name)  -> TRUE

(14)       if (&User-Name)  {

(14)         if (&User-Name =~ / /) {

(14)         if (&User-Name =~ / /)  -> FALSE

(14)         if (&User-Name =~ /@[^@]*@/ ) {

(14)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(14)         if (&User-Name =~ /\.\./ ) {

(14)         if (&User-Name =~ /\.\./ )  -> FALSE

(14)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(14)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE

(14)         if (&User-Name =~ /\.$/)  {

(14)         if (&User-Name =~ /\.$/)   -> FALSE

(14)         if (&User-Name =~ /@\./)  {

(14)         if (&User-Name =~ /@\./)   -> FALSE

(14)       } # if (&User-Name)  = notfound

(14)     } # policy filter_username = notfound

(14)     [preprocess] = ok

(14)     [chap] = noop

(14)     [mschap] = noop

(14)     [digest] = noop

(14) suffix: Checking for suffix after "@"

(14) suffix: No '@' in User-Name = "test", looking up realm NULL

(14) suffix: No such realm "NULL"

(14)     [suffix] = noop

(14) eap: Peer sent EAP Response (code 2) ID 3 length 172

(14) eap: Continuing tunnel setup

(14)     [eap] = ok

(14)   } # authorize = ok

(14) Found Auth-Type = eap

(14) # Executing group from file /etc/raddb/sites-enabled/default

(14)   Auth-Type eap {

(14) eap: Expiring EAP session with state 0x1aff00fb1ef9150b

(14) eap: Finished EAP session with state 0x5709dc2c560ac55d

(14) eap: Previous EAP request found for state 0x5709dc2c560ac55d, released
from the list

(14) eap: Peer sent packet with method EAP PEAP (25)

(14) eap: Calling submodule eap_peap to process data

(14) eap_peap: Continuing EAP-TLS

(14) eap_peap: Peer indicated complete TLS record size will be 162 bytes

(14) eap_peap: Got complete TLS record (162 bytes)

(14) eap_peap: [eaptls verify] = length included

(14) eap_peap: (other): before SSL initialization

(14) eap_peap: TLS_accept: before SSL initialization

(14) eap_peap: TLS_accept: before SSL initialization

(14) eap_peap: <<< recv TLS 1.3  [length 009d] 

(14) eap_peap: TLS_accept: SSLv3/TLS read client hello

(14) eap_peap: >>> send TLS 1.2  [length 003d] 

(14) eap_peap: TLS_accept: SSLv3/TLS write server hello

(14) eap_peap: >>> send TLS 1.2  [length 08e9] 

(14) eap_peap: TLS_accept: SSLv3/TLS write certificate

(14) eap_peap: >>> send TLS 1.2  [length 014d] 

(14) eap_peap: TLS_accept: SSLv3/TLS write key exchange

(14) eap_peap: >>> send TLS 1.2  [length 0004] 

(14) eap_peap: TLS_accept: SSLv3/TLS write server done

(14) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server
done

(14) eap_peap: TLS - In Handshake Phase

(14) eap_peap: TLS - got 2699 bytes of data

(14) eap_peap: [eaptls process] = handled

(14) eap: Sending EAP Request (code 1) ID 4 length 1014

(14) eap: EAP session adding &reply:State = 0x5709dc2c550dc55d

(14)     [eap] = handled

(14)     if (handled && (Response-Packet-Type == Access-Challenge)) {

(14)     EXPAND Response-Packet-Type

(14)        --> Access-Challenge

(14)     if (handled && (Response-Packet-Type == Access-Challenge))  -> TRUE

(14)     if (handled && (Response-Packet-Type == Access-Challenge))  {

(14) attr_filter.access_challenge: EXPAND %{User-Name}

(14) attr_filter.access_challenge:    --> test

(14) attr_filter.access_challenge: Matched entry DEFAULT at line 12

(14)       [attr_filter.access_challenge.post-auth] = updated

(14)       [handled] = handled

(14)     } # if (handled && (Response-Packet-Type == Access-Challenge))  =
handled

(14)   } # Auth-Type eap = handled

(14) Using Post-Auth-Type Challenge

(14) # Executing group from file /etc/raddb/sites-enabled/default

(14)   Challenge { ... } # empty sub-section is ignored

(14) Sent Access-Challenge Id 188 from 10.101.0.20:1812 to 10.100.0.50:1645
length 0

(14)   EAP-Message =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(14)   Message-Authenticator = 0x00000000000000000000000000000000

(14)   State = 0x5709dc2c550dc55d080b76220813d0d4

(14) Finished request

Waking up in 4.9 seconds.

(15) Received Access-Request Id 189 from 10.100.0.50:1645 to
10.101.0.20:1812 length 209

(15)   User-Name = "test"

(15)   Service-Type = Framed-User

(15)   Framed-MTU = 1500

(15)   Called-Station-Id = "24-01-C7-8E-84-86"

(15)   Calling-Station-Id = "74-78-27-1B-F2-78"

(15)   EAP-Message = 0x020400061900

(15)   Message-Authenticator = 0x5c6dceb7d89b74812695116e8c825b77

(15)   Cisco-AVPair = "audit-session-id=0A6400320000003EB2ADB5C7"

(15)   NAS-Port-Type = Ethernet

(15)   NAS-Port = 50006

(15)   NAS-Port-Id = "GigabitEthernet0/6"

(15)   State = 0x5709dc2c550dc55d080b76220813d0d4

(15)   NAS-IP-Address = 10.100.0.50

(15) session-state: No cached attributes

(15) # Executing section authorize from file
/etc/raddb/sites-enabled/default

(15)   authorize {

(15)     policy filter_username {

(15)       if (&User-Name) {

(15)       if (&User-Name)  -> TRUE

(15)       if (&User-Name)  {

(15)         if (&User-Name =~ / /) {

(15)         if (&User-Name =~ / /)  -> FALSE

(15)         if (&User-Name =~ /@[^@]*@/ ) {

(15)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(15)         if (&User-Name =~ /\.\./ ) {

(15)         if (&User-Name =~ /\.\./ )  -> FALSE

(15)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(15)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE

(15)         if (&User-Name =~ /\.$/)  {

(15)         if (&User-Name =~ /\.$/)   -> FALSE

(15)         if (&User-Name =~ /@\./)  {

(15)         if (&User-Name =~ /@\./)   -> FALSE

(15)       } # if (&User-Name)  = notfound

(15)     } # policy filter_username = notfound

(15)     [preprocess] = ok

(15)     [chap] = noop

(15)     [mschap] = noop

(15)     [digest] = noop

(15) suffix: Checking for suffix after "@"

(15) suffix: No '@' in User-Name = "test", looking up realm NULL

(15) suffix: No such realm "NULL"

(15)     [suffix] = noop

(15) eap: Peer sent EAP Response (code 2) ID 4 length 6

(15) eap: Continuing tunnel setup

(15)     [eap] = ok

(15)   } # authorize = ok

(15) Found Auth-Type = eap

(15) # Executing group from file /etc/raddb/sites-enabled/default

(15)   Auth-Type eap {

(15) eap: Expiring EAP session with state 0x1aff00fb1ef9150b

(15) eap: Finished EAP session with state 0x5709dc2c550dc55d

(15) eap: Previous EAP request found for state 0x5709dc2c550dc55d, released
from the list

(15) eap: Peer sent packet with method EAP PEAP (25)

(15) eap: Calling submodule eap_peap to process data

(15) eap_peap: Continuing EAP-TLS

(15) eap_peap: Peer ACKed our handshake fragment

(15) eap_peap: [eaptls verify] = request

(15) eap_peap: [eaptls process] = handled

(15) eap: Sending EAP Request (code 1) ID 5 length 1010

(15) eap: EAP session adding &reply:State = 0x5709dc2c540cc55d

(15)     [eap] = handled

(15)     if (handled && (Response-Packet-Type == Access-Challenge)) {

(15)     EXPAND Response-Packet-Type

(15)        --> Access-Challenge

(15)     if (handled && (Response-Packet-Type == Access-Challenge))  -> TRUE

(15)     if (handled && (Response-Packet-Type == Access-Challenge))  {

(15) attr_filter.access_challenge: EXPAND %{User-Name}

(15) attr_filter.access_challenge:    --> test

(15) attr_filter.access_challenge: Matched entry DEFAULT at line 12

(15)       [attr_filter.access_challenge.post-auth] = updated

(15)       [handled] = handled

(15)     } # if (handled && (Response-Packet-Type == Access-Challenge))  =
handled

(15)   } # Auth-Type eap = handled

(15) Using Post-Auth-Type Challenge

(15) # Executing group from file /etc/raddb/sites-enabled/default

(15)   Challenge { ... } # empty sub-section is ignored

(15) Sent Access-Challenge Id 189 from 10.101.0.20:1812 to 10.100.0.50:1645
length 0

(15)   EAP-Message =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(15)   Message-Authenticator = 0x00000000000000000000000000000000

(15)   State = 0x5709dc2c540cc55d080b76220813d0d4

(15) Finished request

Waking up in 4.9 seconds.

(16) Received Access-Request Id 190 from 10.100.0.50:1645 to
10.101.0.20:1812 length 209

(16)   User-Name = "test"

(16)   Service-Type = Framed-User

(16)   Framed-MTU = 1500

(16)   Called-Station-Id = "24-01-C7-8E-84-86"

(16)   Calling-Station-Id = "74-78-27-1B-F2-78"

(16)   EAP-Message = 0x020500061900

(16)   Message-Authenticator = 0x338407f535f332f0091f8b6a8546c39a

(16)   Cisco-AVPair = "audit-session-id=0A6400320000003EB2ADB5C7"

(16)   NAS-Port-Type = Ethernet

(16)   NAS-Port = 50006

(16)   NAS-Port-Id = "GigabitEthernet0/6"

(16)   State = 0x5709dc2c540cc55d080b76220813d0d4

(16)   NAS-IP-Address = 10.100.0.50

(16) session-state: No cached attributes

(16) # Executing section authorize from file
/etc/raddb/sites-enabled/default

(16)   authorize {

(16)     policy filter_username {

(16)       if (&User-Name) {

(16)       if (&User-Name)  -> TRUE

(16)       if (&User-Name)  {

(16)         if (&User-Name =~ / /) {

(16)         if (&User-Name =~ / /)  -> FALSE

(16)         if (&User-Name =~ /@[^@]*@/ ) {

(16)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(16)         if (&User-Name =~ /\.\./ ) {

(16)         if (&User-Name =~ /\.\./ )  -> FALSE

(16)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(16)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE

(16)         if (&User-Name =~ /\.$/)  {

(16)         if (&User-Name =~ /\.$/)   -> FALSE

(16)         if (&User-Name =~ /@\./)  {

(16)         if (&User-Name =~ /@\./)   -> FALSE

(16)       } # if (&User-Name)  = notfound

(16)     } # policy filter_username = notfound

(16)     [preprocess] = ok

(16)     [chap] = noop

(16)     [mschap] = noop

(16)     [digest] = noop

(16) suffix: Checking for suffix after "@"

(16) suffix: No '@' in User-Name = "test", looking up realm NULL

(16) suffix: No such realm "NULL"

(16)     [suffix] = noop

(16) eap: Peer sent EAP Response (code 2) ID 5 length 6

(16) eap: Continuing tunnel setup

(16)     [eap] = ok

(16)   } # authorize = ok

(16) Found Auth-Type = eap

(16) # Executing group from file /etc/raddb/sites-enabled/default

(16)   Auth-Type eap {

(16) eap: Expiring EAP session with state 0x1aff00fb1ef9150b

(16) eap: Finished EAP session with state 0x5709dc2c540cc55d

(16) eap: Previous EAP request found for state 0x5709dc2c540cc55d, released
from the list

(16) eap: Peer sent packet with method EAP PEAP (25)

(16) eap: Calling submodule eap_peap to process data

(16) eap_peap: Continuing EAP-TLS

(16) eap_peap: Peer ACKed our handshake fragment

(16) eap_peap: [eaptls verify] = request

(16) eap_peap: [eaptls process] = handled

(16) eap: Sending EAP Request (code 1) ID 6 length 697

(16) eap: EAP session adding &reply:State = 0x5709dc2c530fc55d

(16)     [eap] = handled

(16)     if (handled && (Response-Packet-Type == Access-Challenge)) {

(16)     EXPAND Response-Packet-Type

(16)        --> Access-Challenge

(16)     if (handled && (Response-Packet-Type == Access-Challenge))  -> TRUE

(16)     if (handled && (Response-Packet-Type == Access-Challenge))  {

(16) attr_filter.access_challenge: EXPAND %{User-Name}

(16) attr_filter.access_challenge:    --> test

(16) attr_filter.access_challenge: Matched entry DEFAULT at line 12

(16)       [attr_filter.access_challenge.post-auth] = updated

(16)       [handled] = handled

(16)     } # if (handled && (Response-Packet-Type == Access-Challenge))  =
handled

(16)   } # Auth-Type eap = handled

(16) Using Post-Auth-Type Challenge

(16) # Executing group from file /etc/raddb/sites-enabled/default

(16)   Challenge { ... } # empty sub-section is ignored

(16) Sent Access-Challenge Id 190 from 10.101.0.20:1812 to 10.100.0.50:1645
length 0

(16)   EAP-Message =
0x010602b919001d130101ff040530030101ff30360603551d1f042f302d302ba029a0278625
687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c30
0d06092a864886f70d01010b050003820101008834a7e636cc1b2ca1fb50f0241d142dea0f64
ab2a18f737a1c61001f253baa32022d21b23e2d32ef93967a914fb7435030effabacdf1f473b
35bfd23a886c4fbc7d6c194afd9160e340612d83f81e694c5813983a691a9ed83ee45ad98a87
9609630093e2ada4eb67dcafd2543577b94229d604cde33e0314dba26abd7d5674f57a3c4654
49fea9cd762ad1d4a39a0101a207c17e107c4bcc95024237ad91815bf140b75eb9734ad96157
81be60643011fc9718e8acffb9dc4ce9d051c3ea5712dc6aa7ba1d9d2ba8df6c3bdbc7942c0d
7f01c8fddbe6182cf8880f339a038ed8f0c7b579d87e4a30f42c1c978f36c070d759b3319901
9e7d482f8786044516160303014d0c00014903001741045122cc6a47b169b7a16ff1

(16)   Message-Authenticator = 0x00000000000000000000000000000000

(16)   State = 0x5709dc2c530fc55d080b76220813d0d4

(16) Finished request

Waking up in 4.8 seconds.

(17) Received Access-Request Id 191 from 10.100.0.50:1645 to
10.101.0.20:1812 length 339

(17)   User-Name = "test"

(17)   Service-Type = Framed-User

(17)   Framed-MTU = 1500

(17)   Called-Station-Id = "24-01-C7-8E-84-86"

(17)   Calling-Station-Id = "74-78-27-1B-F2-78"

(17)   EAP-Message =
0x0206008819800000007e160303004610000042410446771ce3728af651ce38b33f2dbad2de
2ec1398220b2deca4e147610a28845f811a15650a23e9c2d6cda8703a81d827e6d5c3335a7ad
ed1f9348bed6398856db140303000101160303002800000000000000006467b41f8f49082292
2783c45df9e0ab3f5f3ee2d6b27ac824a0291d83fc0cbb

(17)   Message-Authenticator = 0x9881bcce42caeb449d1792b76c542650

(17)   Cisco-AVPair = "audit-session-id=0A6400320000003EB2ADB5C7"

(17)   NAS-Port-Type = Ethernet

(17)   NAS-Port = 50006

(17)   NAS-Port-Id = "GigabitEthernet0/6"

(17)   State = 0x5709dc2c530fc55d080b76220813d0d4

(17)   NAS-IP-Address = 10.100.0.50

(17) session-state: No cached attributes

(17) # Executing section authorize from file
/etc/raddb/sites-enabled/default

(17)   authorize {

(17)     policy filter_username {

(17)       if (&User-Name) {

(17)       if (&User-Name)  -> TRUE

(17)       if (&User-Name)  {

(17)         if (&User-Name =~ / /) {

(17)         if (&User-Name =~ / /)  -> FALSE

(17)         if (&User-Name =~ /@[^@]*@/ ) {

(17)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(17)         if (&User-Name =~ /\.\./ ) {

(17)         if (&User-Name =~ /\.\./ )  -> FALSE

(17)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(17)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE

(17)         if (&User-Name =~ /\.$/)  {

(17)         if (&User-Name =~ /\.$/)   -> FALSE

(17)         if (&User-Name =~ /@\./)  {

(17)         if (&User-Name =~ /@\./)   -> FALSE

(17)       } # if (&User-Name)  = notfound

(17)     } # policy filter_username = notfound

(17)     [preprocess] = ok

(17)     [chap] = noop

(17)     [mschap] = noop

(17)     [digest] = noop

(17) suffix: Checking for suffix after "@"

(17) suffix: No '@' in User-Name = "test", looking up realm NULL

(17) suffix: No such realm "NULL"

(17)     [suffix] = noop

(17) eap: Peer sent EAP Response (code 2) ID 6 length 136

(17) eap: Continuing tunnel setup

(17)     [eap] = ok

(17)   } # authorize = ok

(17) Found Auth-Type = eap

(17) # Executing group from file /etc/raddb/sites-enabled/default

(17)   Auth-Type eap {

(17) eap: Expiring EAP session with state 0x1aff00fb1ef9150b

(17) eap: Finished EAP session with state 0x5709dc2c530fc55d

(17) eap: Previous EAP request found for state 0x5709dc2c530fc55d, released
from the list

(17) eap: Peer sent packet with method EAP PEAP (25)

(17) eap: Calling submodule eap_peap to process data

(17) eap_peap: Continuing EAP-TLS

(17) eap_peap: Peer indicated complete TLS record size will be 126 bytes

(17) eap_peap: Got complete TLS record (126 bytes)

(17) eap_peap: [eaptls verify] = length included

(17) eap_peap: TLS_accept: SSLv3/TLS write server done

(17) eap_peap: <<< recv TLS 1.2  [length 0046] 

(17) eap_peap: TLS_accept: SSLv3/TLS read client key exchange

(17) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec

(17) eap_peap: <<< recv TLS 1.2  [length 0010] 

(17) eap_peap: TLS_accept: SSLv3/TLS read finished

(17) eap_peap: >>> send TLS 1.2  [length 0001] 

(17) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec

(17) eap_peap: >>> send TLS 1.2  [length 0010] 

(17) eap_peap: TLS_accept: SSLv3/TLS write finished

(17) eap_peap: (other): SSL negotiation finished successfully

(17) eap_peap: TLS - Connection Established

(17) eap_peap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"

(17) eap_peap: TLS-Session-Version = "TLS 1.2"

(17) eap_peap: TLS - got 51 bytes of data

(17) eap_peap: [eaptls process] = handled

(17) eap: Sending EAP Request (code 1) ID 7 length 57

(17) eap: EAP session adding &reply:State = 0x5709dc2c520ec55d

(17)     [eap] = handled

(17)     if (handled && (Response-Packet-Type == Access-Challenge)) {

(17)     EXPAND Response-Packet-Type

(17)        --> Access-Challenge

(17)     if (handled && (Response-Packet-Type == Access-Challenge))  -> TRUE

(17)     if (handled && (Response-Packet-Type == Access-Challenge))  {

(17) attr_filter.access_challenge: EXPAND %{User-Name}

(17) attr_filter.access_challenge:    --> test

(17) attr_filter.access_challenge: Matched entry DEFAULT at line 12

(17)       [attr_filter.access_challenge.post-auth] = updated

(17)       [handled] = handled

(17)     } # if (handled && (Response-Packet-Type == Access-Challenge))  =
handled

(17)   } # Auth-Type eap = handled

(17) Using Post-Auth-Type Challenge

(17) # Executing group from file /etc/raddb/sites-enabled/default

(17)   Challenge { ... } # empty sub-section is ignored

(17) session-state: Saving cached attributes

(17)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"

(17)   TLS-Session-Version = "TLS 1.2"

(17) Sent Access-Challenge Id 191 from 10.101.0.20:1812 to 10.100.0.50:1645
length 0

(17)   EAP-Message =
0x01070039190014030300010116030300285bc3632e6b443560a1c7f7fcfd4d4dce83eb70b6
a001d27389578382a78d0283e43c7e8969d6f3ba

(17)   Message-Authenticator = 0x00000000000000000000000000000000

(17)   State = 0x5709dc2c520ec55d080b76220813d0d4

(17) Finished request

Waking up in 4.8 seconds.

(18) Received Access-Request Id 192 from 10.100.0.50:1645 to
10.101.0.20:1812 length 209

(18)   User-Name = "test"

(18)   Service-Type = Framed-User

(18)   Framed-MTU = 1500

(18)   Called-Station-Id = "24-01-C7-8E-84-86"

(18)   Calling-Station-Id = "74-78-27-1B-F2-78"

(18)   EAP-Message = 0x020700061900

(18)   Message-Authenticator = 0x33689c92606612b6d8b208e12717fd08

(18)   Cisco-AVPair = "audit-session-id=0A6400320000003EB2ADB5C7"

(18)   NAS-Port-Type = Ethernet

(18)   NAS-Port = 50006

(18)   NAS-Port-Id = "GigabitEthernet0/6"

(18)   State = 0x5709dc2c520ec55d080b76220813d0d4

(18)   NAS-IP-Address = 10.100.0.50

(18) Restoring &session-state

(18)   &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"

(18)   &session-state:TLS-Session-Version = "TLS 1.2"

(18) # Executing section authorize from file
/etc/raddb/sites-enabled/default

(18)   authorize {

(18)     policy filter_username {

(18)       if (&User-Name) {

(18)       if (&User-Name)  -> TRUE

(18)       if (&User-Name)  {

(18)         if (&User-Name =~ / /) {

(18)         if (&User-Name =~ / /)  -> FALSE

(18)         if (&User-Name =~ /@[^@]*@/ ) {

(18)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(18)         if (&User-Name =~ /\.\./ ) {

(18)         if (&User-Name =~ /\.\./ )  -> FALSE

(18)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(18)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE

(18)         if (&User-Name =~ /\.$/)  {

(18)         if (&User-Name =~ /\.$/)   -> FALSE

(18)         if (&User-Name =~ /@\./)  {

(18)         if (&User-Name =~ /@\./)   -> FALSE

(18)       } # if (&User-Name)  = notfound

(18)     } # policy filter_username = notfound

(18)     [preprocess] = ok

(18)     [chap] = noop

(18)     [mschap] = noop

(18)     [digest] = noop

(18) suffix: Checking for suffix after "@"

(18) suffix: No '@' in User-Name = "test", looking up realm NULL

(18) suffix: No such realm "NULL"

(18)     [suffix] = noop

(18) eap: Peer sent EAP Response (code 2) ID 7 length 6

(18) eap: Continuing tunnel setup

(18)     [eap] = ok

(18)   } # authorize = ok

(18) Found Auth-Type = eap

(18) # Executing group from file /etc/raddb/sites-enabled/default

(18)   Auth-Type eap {

(18) eap: Expiring EAP session with state 0x1aff00fb1ef9150b

(18) eap: Finished EAP session with state 0x5709dc2c520ec55d

(18) eap: Previous EAP request found for state 0x5709dc2c520ec55d, released
from the list

(18) eap: Peer sent packet with method EAP PEAP (25)

(18) eap: Calling submodule eap_peap to process data

(18) eap_peap: Continuing EAP-TLS

(18) eap_peap: Peer ACKed our handshake fragment.  handshake is finished

(18) eap_peap: [eaptls verify] = success

(18) eap_peap: [eaptls process] = success

(18) eap_peap: Session established.  Decoding tunneled attributes

(18) eap_peap: PEAP state TUNNEL ESTABLISHED

(18) eap: Sending EAP Request (code 1) ID 8 length 40

(18) eap: EAP session adding &reply:State = 0x5709dc2c5101c55d

(18)     [eap] = handled

(18)     if (handled && (Response-Packet-Type == Access-Challenge)) {

(18)     EXPAND Response-Packet-Type

(18)        --> Access-Challenge

(18)     if (handled && (Response-Packet-Type == Access-Challenge))  -> TRUE

(18)     if (handled && (Response-Packet-Type == Access-Challenge))  {

(18) attr_filter.access_challenge: EXPAND %{User-Name}

(18) attr_filter.access_challenge:    --> test

(18) attr_filter.access_challenge: Matched entry DEFAULT at line 12

(18)       [attr_filter.access_challenge.post-auth] = updated

(18)       [handled] = handled

(18)     } # if (handled && (Response-Packet-Type == Access-Challenge))  =
handled

(18)   } # Auth-Type eap = handled

(18) Using Post-Auth-Type Challenge

(18) # Executing group from file /etc/raddb/sites-enabled/default

(18)   Challenge { ... } # empty sub-section is ignored

(18) session-state: Saving cached attributes

(18)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"

(18)   TLS-Session-Version = "TLS 1.2"

(18) Sent Access-Challenge Id 192 from 10.101.0.20:1812 to 10.100.0.50:1645
length 0

(18)   EAP-Message =
0x010800281900170303001d5bc3632e6b443561fcf82593fda17abbf449f59d02196666fae6
9cf929

(18)   Message-Authenticator = 0x00000000000000000000000000000000

(18)   State = 0x5709dc2c5101c55d080b76220813d0d4

(18) Finished request

Waking up in 2.1 seconds.

(19) Received Access-Request Id 193 from 10.100.0.50:1645 to
10.101.0.20:1812 length 243

(19)   User-Name = "test"

(19)   Service-Type = Framed-User

(19)   Framed-MTU = 1500

(19)   Called-Station-Id = "24-01-C7-8E-84-86"

(19)   Calling-Station-Id = "74-78-27-1B-F2-78"

(19)   EAP-Message =
0x020800281900170303001d0000000000000001f4b75ef3c9c70e7de845b7ad53435ce649bc
e97bd6

(19)   Message-Authenticator = 0xdd6a472f02ab76bc724223ac8592f303

(19)   Cisco-AVPair = "audit-session-id=0A6400320000003EB2ADB5C7"

(19)   NAS-Port-Type = Ethernet

(19)   NAS-Port = 50006

(19)   NAS-Port-Id = "GigabitEthernet0/6"

(19)   State = 0x5709dc2c5101c55d080b76220813d0d4

(19)   NAS-IP-Address = 10.100.0.50

(19) Restoring &session-state

(19)   &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"

(19)   &session-state:TLS-Session-Version = "TLS 1.2"

(19) # Executing section authorize from file
/etc/raddb/sites-enabled/default

(19)   authorize {

(19)     policy filter_username {

(19)       if (&User-Name) {

(19)       if (&User-Name)  -> TRUE

(19)       if (&User-Name)  {

(19)         if (&User-Name =~ / /) {

(19)         if (&User-Name =~ / /)  -> FALSE

(19)         if (&User-Name =~ /@[^@]*@/ ) {

(19)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(19)         if (&User-Name =~ /\.\./ ) {

(19)         if (&User-Name =~ /\.\./ )  -> FALSE

(19)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(19)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE

(19)         if (&User-Name =~ /\.$/)  {

(19)         if (&User-Name =~ /\.$/)   -> FALSE

(19)         if (&User-Name =~ /@\./)  {

(19)         if (&User-Name =~ /@\./)   -> FALSE

(19)       } # if (&User-Name)  = notfound

(19)     } # policy filter_username = notfound

(19)     [preprocess] = ok

(19)     [chap] = noop

(19)     [mschap] = noop

(19)     [digest] = noop

(19) suffix: Checking for suffix after "@"

(19) suffix: No '@' in User-Name = "test", looking up realm NULL

(19) suffix: No such realm "NULL"

(19)     [suffix] = noop

(19) eap: Peer sent EAP Response (code 2) ID 8 length 40

(19) eap: Continuing tunnel setup

(19)     [eap] = ok

(19)   } # authorize = ok

(19) Found Auth-Type = eap

(19) # Executing group from file /etc/raddb/sites-enabled/default

(19)   Auth-Type eap {

(19) eap: Expiring EAP session with state 0x1aff00fb1ef9150b

(19) eap: Finished EAP session with state 0x5709dc2c5101c55d

(19) eap: Previous EAP request found for state 0x5709dc2c5101c55d, released
from the list

(19) eap: Peer sent packet with method EAP PEAP (25)

(19) eap: Calling submodule eap_peap to process data

(19) eap_peap: Continuing EAP-TLS

(19) eap_peap: [eaptls verify] = ok

(19) eap_peap: Done initial handshake

(19) eap_peap: [eaptls process] = ok

(19) eap_peap: Session established.  Decoding tunneled attributes

(19) eap_peap: PEAP state WAITING FOR INNER IDENTITY

(19) eap_peap: Identity - test

(19) eap_peap: Got inner identity 'test'

(19) eap_peap: Setting default EAP type for tunneled EAP session

(19) eap_peap: Got tunneled request

(19) eap_peap:   EAP-Message = 0x020800090174657374

(19) eap_peap: Setting User-Name to test

(19) eap_peap: Sending tunneled request to inner-tunnel

(19) eap_peap:   EAP-Message = 0x020800090174657374

(19) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1

(19) eap_peap:   User-Name = "test"

(19) Virtual server inner-tunnel received request

(19)   EAP-Message = 0x020800090174657374

(19)   FreeRADIUS-Proxied-To = 127.0.0.1

(19)   User-Name = "test"

(19) WARNING: Outer and inner identities are the same.  User privacy is
compromised.

(19) server inner-tunnel {

(19)   # Executing section authorize from file
/etc/raddb/sites-enabled/inner-tunnel

(19)     authorize {

(19)       policy filter_username {

(19)         if (&User-Name) {

(19)         if (&User-Name)  -> TRUE

(19)         if (&User-Name)  {

(19)           if (&User-Name =~ / /) {

(19)           if (&User-Name =~ / /)  -> FALSE

(19)           if (&User-Name =~ /@[^@]*@/ ) {

(19)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(19)           if (&User-Name =~ /\.\./ ) {

(19)           if (&User-Name =~ /\.\./ )  -> FALSE

(19)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(19)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE

(19)           if (&User-Name =~ /\.$/)  {

(19)           if (&User-Name =~ /\.$/)   -> FALSE

(19)           if (&User-Name =~ /@\./)  {

(19)           if (&User-Name =~ /@\./)   -> FALSE

(19)         } # if (&User-Name)  = notfound

(19)       } # policy filter_username = notfound

(19)       [chap] = noop

(19)       [mschap] = noop

(19) suffix: Checking for suffix after "@"

(19) suffix: No '@' in User-Name = "test", looking up realm NULL

(19) suffix: No such realm "NULL"

(19)       [suffix] = noop

(19)       update control {

(19)         &Proxy-To-Realm := LOCAL

(19)       } # update control = noop

(19) eap: Peer sent EAP Response (code 2) ID 8 length 9

(19) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize

(19)       [eap] = ok

(19)     } # authorize = ok

(19)   Found Auth-Type = eap

(19)   # Executing group from file /etc/raddb/sites-enabled/inner-tunnel

(19)     authenticate {

(19) eap: Peer sent packet with method EAP Identity (1)

(19) eap: Calling submodule eap_mschapv2 to process data

(19) eap_mschapv2: Issuing Challenge

(19) eap: Sending EAP Request (code 1) ID 9 length 43

(19) eap: EAP session adding &reply:State = 0xc8f1f8bdc8f8e24d

(19)       [eap] = handled

(19)     } # authenticate = handled

(19) } # server inner-tunnel

(19) Virtual server sending reply

(19)   EAP-Message =
0x0109002b1a0109002610a8aea7b97f9ff88acc6d299565ea3e33667265657261646975732d
332e302e3230

(19)   Message-Authenticator = 0x00000000000000000000000000000000

(19)   State = 0xc8f1f8bdc8f8e24d226d055121876240

(19) eap_peap: Got tunneled reply code 11

(19) eap_peap:   EAP-Message =
0x0109002b1a0109002610a8aea7b97f9ff88acc6d299565ea3e33667265657261646975732d
332e302e3230

(19) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000

(19) eap_peap:   State = 0xc8f1f8bdc8f8e24d226d055121876240

(19) eap_peap: Got tunneled reply RADIUS code 11

(19) eap_peap:   EAP-Message =
0x0109002b1a0109002610a8aea7b97f9ff88acc6d299565ea3e33667265657261646975732d
332e302e3230

(19) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000

(19) eap_peap:   State = 0xc8f1f8bdc8f8e24d226d055121876240

(19) eap_peap: Got tunneled Access-Challenge

(19) eap: Sending EAP Request (code 1) ID 9 length 74

(19) eap: EAP session adding &reply:State = 0x5709dc2c5000c55d

(19)     [eap] = handled

(19)     if (handled && (Response-Packet-Type == Access-Challenge)) {

(19)     EXPAND Response-Packet-Type

(19)        --> Access-Challenge

(19)     if (handled && (Response-Packet-Type == Access-Challenge))  -> TRUE

(19)     if (handled && (Response-Packet-Type == Access-Challenge))  {

(19) attr_filter.access_challenge: EXPAND %{User-Name}

(19) attr_filter.access_challenge:    --> test

(19) attr_filter.access_challenge: Matched entry DEFAULT at line 12

(19)       [attr_filter.access_challenge.post-auth] = updated

(19)       [handled] = handled

(19)     } # if (handled && (Response-Packet-Type == Access-Challenge))  =
handled

(19)   } # Auth-Type eap = handled

(19) Using Post-Auth-Type Challenge

(19) # Executing group from file /etc/raddb/sites-enabled/default

(19)   Challenge { ... } # empty sub-section is ignored

(19) session-state: Saving cached attributes

(19)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"

(19)   TLS-Session-Version = "TLS 1.2"

(19) Sent Access-Challenge Id 193 from 10.101.0.20:1812 to 10.100.0.50:1645
length 0

(19)   EAP-Message =
0x0109004a1900170303003f5bc3632e6b4435625e5c5051af7c363be95d4ee4f3f3b7ac445d
1ecac6abc90cb5263d48732e332fae270276b7d924f672cc1b74d6916b68c2e03e7ebe1975

(19)   Message-Authenticator = 0x00000000000000000000000000000000

(19)   State = 0x5709dc2c5000c55d080b76220813d0d4

(19) Finished request

Waking up in 2.0 seconds.

(20) Received Access-Request Id 194 from 10.100.0.50:1645 to
10.101.0.20:1812 length 297

(20)   User-Name = "test"

(20)   Service-Type = Framed-User

(20)   Framed-MTU = 1500

(20)   Called-Station-Id = "24-01-C7-8E-84-86"

(20)   Calling-Station-Id = "74-78-27-1B-F2-78"

(20)   EAP-Message =
0x0209005e19001703030053000000000000000267df274f7aba3c388821a73daf611375d9d7
2eef18a2029801924010afde0f8c56c84035beb392c5d720651c2253091340fa76a3f6a37152
3b42fb59bacd4ff5ff77aa734d8f4abc3bfe4c

(20)   Message-Authenticator = 0xdd9df03d48297b3c9942e21f2b832e07

(20)   Cisco-AVPair = "audit-session-id=0A6400320000003EB2ADB5C7"

(20)   NAS-Port-Type = Ethernet

(20)   NAS-Port = 50006

(20)   NAS-Port-Id = "GigabitEthernet0/6"

(20)   State = 0x5709dc2c5000c55d080b76220813d0d4

(20)   NAS-IP-Address = 10.100.0.50

(20) Restoring &session-state

(20)   &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"

(20)   &session-state:TLS-Session-Version = "TLS 1.2"

(20) # Executing section authorize from file
/etc/raddb/sites-enabled/default

(20)   authorize {

(20)     policy filter_username {

(20)       if (&User-Name) {

(20)       if (&User-Name)  -> TRUE

(20)       if (&User-Name)  {

(20)         if (&User-Name =~ / /) {

(20)         if (&User-Name =~ / /)  -> FALSE

(20)         if (&User-Name =~ /@[^@]*@/ ) {

(20)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(20)         if (&User-Name =~ /\.\./ ) {

(20)         if (&User-Name =~ /\.\./ )  -> FALSE

(20)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(20)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE

(20)         if (&User-Name =~ /\.$/)  {

(20)         if (&User-Name =~ /\.$/)   -> FALSE

(20)         if (&User-Name =~ /@\./)  {

(20)         if (&User-Name =~ /@\./)   -> FALSE

(20)       } # if (&User-Name)  = notfound

(20)     } # policy filter_username = notfound

(20)     [preprocess] = ok

(20)     [chap] = noop

(20)     [mschap] = noop

(20)     [digest] = noop

(20) suffix: Checking for suffix after "@"

(20) suffix: No '@' in User-Name = "test", looking up realm NULL

(20) suffix: No such realm "NULL"

(20)     [suffix] = noop

(20) eap: Peer sent EAP Response (code 2) ID 9 length 94

(20) eap: Continuing tunnel setup

(20)     [eap] = ok

(20)   } # authorize = ok

(20) Found Auth-Type = eap

(20) # Executing group from file /etc/raddb/sites-enabled/default

(20)   Auth-Type eap {

(20) eap: Expiring EAP session with state 0x1aff00fb1ef9150b

(20) eap: Finished EAP session with state 0x5709dc2c5000c55d

(20) eap: Previous EAP request found for state 0x5709dc2c5000c55d, released
from the list

(20) eap: Peer sent packet with method EAP PEAP (25)

(20) eap: Calling submodule eap_peap to process data

(20) eap_peap: Continuing EAP-TLS

(20) eap_peap: [eaptls verify] = ok

(20) eap_peap: Done initial handshake

(20) eap_peap: [eaptls process] = ok

(20) eap_peap: Session established.  Decoding tunneled attributes

(20) eap_peap: PEAP state phase2

(20) eap_peap: EAP method MSCHAPv2 (26)

(20) eap_peap: Got tunneled request

(20) eap_peap:   EAP-Message =
0x0209003f1a0209003a31f90a4533756415a1b4ea82f294876b6100000000000000009e08d5
2c72cd923feca32b6ac7eeece3627638836e7d19f60074657374

(20) eap_peap: Setting User-Name to test

(20) eap_peap: Sending tunneled request to inner-tunnel

(20) eap_peap:   EAP-Message =
0x0209003f1a0209003a31f90a4533756415a1b4ea82f294876b6100000000000000009e08d5
2c72cd923feca32b6ac7eeece3627638836e7d19f60074657374

(20) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1

(20) eap_peap:   User-Name = "test"

(20) eap_peap:   State = 0xc8f1f8bdc8f8e24d226d055121876240

(20) Virtual server inner-tunnel received request

(20)   EAP-Message =
0x0209003f1a0209003a31f90a4533756415a1b4ea82f294876b6100000000000000009e08d5
2c72cd923feca32b6ac7eeece3627638836e7d19f60074657374

(20)   FreeRADIUS-Proxied-To = 127.0.0.1

(20)   User-Name = "test"

(20)   State = 0xc8f1f8bdc8f8e24d226d055121876240

(20) WARNING: Outer and inner identities are the same.  User privacy is
compromised.

(20) server inner-tunnel {

(20)   session-state: No cached attributes

(20)   # Executing section authorize from file
/etc/raddb/sites-enabled/inner-tunnel

(20)     authorize {

(20)       policy filter_username {

(20)         if (&User-Name) {

(20)         if (&User-Name)  -> TRUE

(20)         if (&User-Name)  {

(20)           if (&User-Name =~ / /) {

(20)           if (&User-Name =~ / /)  -> FALSE

(20)           if (&User-Name =~ /@[^@]*@/ ) {

(20)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(20)           if (&User-Name =~ /\.\./ ) {

(20)           if (&User-Name =~ /\.\./ )  -> FALSE

(20)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(20)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE

(20)           if (&User-Name =~ /\.$/)  {

(20)           if (&User-Name =~ /\.$/)   -> FALSE

(20)           if (&User-Name =~ /@\./)  {

(20)           if (&User-Name =~ /@\./)   -> FALSE

(20)         } # if (&User-Name)  = notfound

(20)       } # policy filter_username = notfound

(20)       [chap] = noop

(20)       [mschap] = noop

(20) suffix: Checking for suffix after "@"

(20) suffix: No '@' in User-Name = "test", looking up realm NULL

(20) suffix: No such realm "NULL"

(20)       [suffix] = noop

(20)       update control {

(20)         &Proxy-To-Realm := LOCAL

(20)       } # update control = noop

(20) eap: Peer sent EAP Response (code 2) ID 9 length 63

(20) eap: No EAP Start, assuming it's an on-going EAP conversation

(20)       [eap] = updated

(20) files: users: Matched entry test at line 1

(20) files: EXPAND tu as reussi avec %{Auth-Type} et en etant %{User-Name}

(20) files:    --> tu as reussi avec  et en etant test

(20)       [files] = ok

(20)       [expiration] = noop

(20)       [logintime] = noop

(20) pap: WARNING: Auth-Type already set.  Not setting to PAP

(20)       [pap] = noop

(20)     } # authorize = updated

(20)   Found Auth-Type = eap

(20)   # Executing group from file /etc/raddb/sites-enabled/inner-tunnel

(20)     authenticate {

(20) eap: Expiring EAP session with state 0x1aff00fb1ef9150b

(20) eap: Finished EAP session with state 0xc8f1f8bdc8f8e24d

(20) eap: Previous EAP request found for state 0xc8f1f8bdc8f8e24d, released
from the list

(20) eap: Peer sent packet with method EAP MSCHAPv2 (26)

(20) eap: Calling submodule eap_mschapv2 to process data

(20) eap_mschapv2: # Executing group from file
/etc/raddb/sites-enabled/inner-tunnel

(20) eap_mschapv2:   authenticate {

(20) mschap: Found Cleartext-Password, hashing to create NT-Password

(20) mschap: Creating challenge hash with username: test

(20) mschap: Client is using MS-CHAPv2

(20) mschap: Adding MS-CHAPv2 MPPE keys

(20) eap_mschapv2:     [mschap] = ok

(20) eap_mschapv2:   } # authenticate = ok

(20) eap_mschapv2: MSCHAP Success

(20) eap: Sending EAP Request (code 1) ID 10 length 51

(20) eap: EAP session adding &reply:State = 0xc8f1f8bdc9fbe24d

(20)       [eap] = handled

(20)     } # authenticate = handled

(20) } # server inner-tunnel

(20) Virtual server sending reply

(20)   Reply-Message = "tu as reussi avec  et en etant test"

(20)   EAP-Message =
0x010a00331a0309002e533d4231333644304637383233454339313739434339373332454336
3034393136433231333534313235

(20)   Message-Authenticator = 0x00000000000000000000000000000000

(20)   State = 0xc8f1f8bdc9fbe24d226d055121876240

(20) eap_peap: Got tunneled reply code 11

(20) eap_peap:   Reply-Message = "tu as reussi avec  et en etant test"

(20) eap_peap:   EAP-Message =
0x010a00331a0309002e533d4231333644304637383233454339313739434339373332454336
3034393136433231333534313235

(20) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000

(20) eap_peap:   State = 0xc8f1f8bdc9fbe24d226d055121876240

(20) eap_peap: Got tunneled reply RADIUS code 11

(20) eap_peap:   Reply-Message = "tu as reussi avec  et en etant test"

(20) eap_peap:   EAP-Message =
0x010a00331a0309002e533d4231333644304637383233454339313739434339373332454336
3034393136433231333534313235

(20) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000

(20) eap_peap:   State = 0xc8f1f8bdc9fbe24d226d055121876240

(20) eap_peap: Got tunneled Access-Challenge

(20) eap: Sending EAP Request (code 1) ID 10 length 82

(20) eap: EAP session adding &reply:State = 0x5709dc2c5f03c55d

(20)     [eap] = handled

(20)     if (handled && (Response-Packet-Type == Access-Challenge)) {

(20)     EXPAND Response-Packet-Type

(20)        --> Access-Challenge

(20)     if (handled && (Response-Packet-Type == Access-Challenge))  -> TRUE

(20)     if (handled && (Response-Packet-Type == Access-Challenge))  {

(20) attr_filter.access_challenge: EXPAND %{User-Name}

(20) attr_filter.access_challenge:    --> test

(20) attr_filter.access_challenge: Matched entry DEFAULT at line 12

(20)       [attr_filter.access_challenge.post-auth] = updated

(20)       [handled] = handled

(20)     } # if (handled && (Response-Packet-Type == Access-Challenge))  =
handled

(20)   } # Auth-Type eap = handled

(20) Using Post-Auth-Type Challenge

(20) # Executing group from file /etc/raddb/sites-enabled/default

(20)   Challenge { ... } # empty sub-section is ignored

(20) session-state: Saving cached attributes

(20)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"

(20)   TLS-Session-Version = "TLS 1.2"

(20) Sent Access-Challenge Id 194 from 10.101.0.20:1812 to 10.100.0.50:1645
length 0

(20)   EAP-Message =
0x010a0052190017030300475bc3632e6b443563bfdb8a34b1d033e80abaed0886740e922409
cc823028e6c31f02665c568a46c5f021df9853700a6be0d1b2248b9520ffad2833cdfccb681b
bfefac58b6c6e8

(20)   Message-Authenticator = 0x00000000000000000000000000000000

(20)   State = 0x5709dc2c5f03c55d080b76220813d0d4

(20) Finished request

Waking up in 2.0 seconds.

(21) Received Access-Request Id 195 from 10.100.0.50:1645 to
10.101.0.20:1812 length 240

(21)   User-Name = "test"

(21)   Service-Type = Framed-User

(21)   Framed-MTU = 1500

(21)   Called-Station-Id = "24-01-C7-8E-84-86"

(21)   Calling-Station-Id = "74-78-27-1B-F2-78"

(21)   EAP-Message =
0x020a00251900170303001a0000000000000003b7e4977bb2c798f1390f20f4c06d08798279

(21)   Message-Authenticator = 0xc450ef4dd19f37f7ff7136f788d710b0

(21)   Cisco-AVPair = "audit-session-id=0A6400320000003EB2ADB5C7"

(21)   NAS-Port-Type = Ethernet

(21)   NAS-Port = 50006

(21)   NAS-Port-Id = "GigabitEthernet0/6"

(21)   State = 0x5709dc2c5f03c55d080b76220813d0d4

(21)   NAS-IP-Address = 10.100.0.50

(21) Restoring &session-state

(21)   &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"

(21)   &session-state:TLS-Session-Version = "TLS 1.2"

(21) # Executing section authorize from file
/etc/raddb/sites-enabled/default

(21)   authorize {

(21)     policy filter_username {

(21)       if (&User-Name) {

(21)       if (&User-Name)  -> TRUE

(21)       if (&User-Name)  {

(21)         if (&User-Name =~ / /) {

(21)         if (&User-Name =~ / /)  -> FALSE

(21)         if (&User-Name =~ /@[^@]*@/ ) {

(21)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(21)         if (&User-Name =~ /\.\./ ) {

(21)         if (&User-Name =~ /\.\./ )  -> FALSE

(21)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(21)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE

(21)         if (&User-Name =~ /\.$/)  {

(21)         if (&User-Name =~ /\.$/)   -> FALSE

(21)         if (&User-Name =~ /@\./)  {

(21)         if (&User-Name =~ /@\./)   -> FALSE

(21)       } # if (&User-Name)  = notfound

(21)     } # policy filter_username = notfound

(21)     [preprocess] = ok

(21)     [chap] = noop

(21)     [mschap] = noop

(21)     [digest] = noop

(21) suffix: Checking for suffix after "@"

(21) suffix: No '@' in User-Name = "test", looking up realm NULL

(21) suffix: No such realm "NULL"

(21)     [suffix] = noop

(21) eap: Peer sent EAP Response (code 2) ID 10 length 37

(21) eap: Continuing tunnel setup

(21)     [eap] = ok

(21)   } # authorize = ok

(21) Found Auth-Type = eap

(21) # Executing group from file /etc/raddb/sites-enabled/default

(21)   Auth-Type eap {

(21) eap: Expiring EAP session with state 0x1aff00fb1ef9150b

(21) eap: Finished EAP session with state 0x5709dc2c5f03c55d

(21) eap: Previous EAP request found for state 0x5709dc2c5f03c55d, released
from the list

(21) eap: Peer sent packet with method EAP PEAP (25)

(21) eap: Calling submodule eap_peap to process data

(21) eap_peap: Continuing EAP-TLS

(21) eap_peap: [eaptls verify] = ok

(21) eap_peap: Done initial handshake

(21) eap_peap: [eaptls process] = ok

(21) eap_peap: Session established.  Decoding tunneled attributes

(21) eap_peap: PEAP state phase2

(21) eap_peap: EAP method MSCHAPv2 (26)

(21) eap_peap: Got tunneled request

(21) eap_peap:   EAP-Message = 0x020a00061a03

(21) eap_peap: Setting User-Name to test

(21) eap_peap: Sending tunneled request to inner-tunnel

(21) eap_peap:   EAP-Message = 0x020a00061a03

(21) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1

(21) eap_peap:   User-Name = "test"

(21) eap_peap:   State = 0xc8f1f8bdc9fbe24d226d055121876240

(21) Virtual server inner-tunnel received request

(21)   EAP-Message = 0x020a00061a03

(21)   FreeRADIUS-Proxied-To = 127.0.0.1

(21)   User-Name = "test"

(21)   State = 0xc8f1f8bdc9fbe24d226d055121876240

(21) WARNING: Outer and inner identities are the same.  User privacy is
compromised.

(21) server inner-tunnel {

(21)   session-state: No cached attributes

(21)   # Executing section authorize from file
/etc/raddb/sites-enabled/inner-tunnel

(21)     authorize {

(21)       policy filter_username {

(21)         if (&User-Name) {

(21)         if (&User-Name)  -> TRUE

(21)         if (&User-Name)  {

(21)           if (&User-Name =~ / /) {

(21)           if (&User-Name =~ / /)  -> FALSE

(21)           if (&User-Name =~ /@[^@]*@/ ) {

(21)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(21)           if (&User-Name =~ /\.\./ ) {

(21)           if (&User-Name =~ /\.\./ )  -> FALSE

(21)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(21)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE

(21)           if (&User-Name =~ /\.$/)  {

(21)           if (&User-Name =~ /\.$/)   -> FALSE

(21)           if (&User-Name =~ /@\./)  {

(21)           if (&User-Name =~ /@\./)   -> FALSE

(21)         } # if (&User-Name)  = notfound

(21)       } # policy filter_username = notfound

(21)       [chap] = noop

(21)       [mschap] = noop

(21) suffix: Checking for suffix after "@"

(21) suffix: No '@' in User-Name = "test", looking up realm NULL

(21) suffix: No such realm "NULL"

(21)       [suffix] = noop

(21)       update control {

(21)         &Proxy-To-Realm := LOCAL

(21)       } # update control = noop

(21) eap: Peer sent EAP Response (code 2) ID 10 length 6

(21) eap: No EAP Start, assuming it's an on-going EAP conversation

(21)       [eap] = updated

(21) files: users: Matched entry test at line 1

(21) files: EXPAND tu as reussi avec %{Auth-Type} et en etant %{User-Name}

(21) files:    --> tu as reussi avec  et en etant test

(21)       [files] = ok

(21)       [expiration] = noop

(21)       [logintime] = noop

(21) pap: WARNING: Auth-Type already set.  Not setting to PAP

(21)       [pap] = noop

(21)     } # authorize = updated

(21)   Found Auth-Type = eap

(21)   # Executing group from file /etc/raddb/sites-enabled/inner-tunnel

(21)     authenticate {

(21) eap: Expiring EAP session with state 0x1aff00fb1ef9150b

(21) eap: Finished EAP session with state 0xc8f1f8bdc9fbe24d

(21) eap: Previous EAP request found for state 0xc8f1f8bdc9fbe24d, released
from the list

(21) eap: Peer sent packet with method EAP MSCHAPv2 (26)

(21) eap: Calling submodule eap_mschapv2 to process data

(21) eap: Sending EAP Success (code 3) ID 10 length 4

(21) eap: Freeing handler

(21)       [eap] = ok

(21)     } # authenticate = ok

(21)   # Executing section post-auth from file
/etc/raddb/sites-enabled/inner-tunnel

(21)     post-auth {

(21)       if (0) {

(21)       if (0)  -> FALSE

(21)     } # post-auth = noop

(21)   Login OK: [test] (from client swi_said_edward_p173 port 0 via TLS
tunnel)

(21) } # server inner-tunnel

(21) Virtual server sending reply

(21)   Reply-Message = "tu as reussi avec  et en etant test"

(21)   MS-MPPE-Encryption-Policy = Encryption-Allowed

(21)   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed

(21)   MS-MPPE-Send-Key = 0x81238317805f6b67fec93e45b3692a81

(21)   MS-MPPE-Recv-Key = 0xca79e92c0f2a71aedddd4dce55d7b4bc

(21)   EAP-Message = 0x030a0004

(21)   Message-Authenticator = 0x00000000000000000000000000000000

(21)   User-Name = "test"

(21) eap_peap: Got tunneled reply code 2

(21) eap_peap:   Reply-Message = "tu as reussi avec  et en etant test"

(21) eap_peap:   MS-MPPE-Encryption-Policy = Encryption-Allowed

(21) eap_peap:   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed

(21) eap_peap:   MS-MPPE-Send-Key = 0x81238317805f6b67fec93e45b3692a81

(21) eap_peap:   MS-MPPE-Recv-Key = 0xca79e92c0f2a71aedddd4dce55d7b4bc

(21) eap_peap:   EAP-Message = 0x030a0004

(21) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000

(21) eap_peap:   User-Name = "test"

(21) eap_peap: Got tunneled reply RADIUS code 2

(21) eap_peap:   Reply-Message = "tu as reussi avec  et en etant test"

(21) eap_peap:   MS-MPPE-Encryption-Policy = Encryption-Allowed

(21) eap_peap:   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed

(21) eap_peap:   MS-MPPE-Send-Key = 0x81238317805f6b67fec93e45b3692a81

(21) eap_peap:   MS-MPPE-Recv-Key = 0xca79e92c0f2a71aedddd4dce55d7b4bc

(21) eap_peap:   EAP-Message = 0x030a0004

(21) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000

(21) eap_peap:   User-Name = "test"

(21) eap_peap: Tunneled authentication was successful

(21) eap_peap: SUCCESS

(21) eap: Sending EAP Request (code 1) ID 11 length 46

(21) eap: EAP session adding &reply:State = 0x5709dc2c5e02c55d

(21)     [eap] = handled

(21)     if (handled && (Response-Packet-Type == Access-Challenge)) {

(21)     EXPAND Response-Packet-Type

(21)        --> Access-Challenge

(21)     if (handled && (Response-Packet-Type == Access-Challenge))  -> TRUE

(21)     if (handled && (Response-Packet-Type == Access-Challenge))  {

(21) attr_filter.access_challenge: EXPAND %{User-Name}

(21) attr_filter.access_challenge:    --> test

(21) attr_filter.access_challenge: Matched entry DEFAULT at line 12

(21)       [attr_filter.access_challenge.post-auth] = updated

(21)       [handled] = handled

(21)     } # if (handled && (Response-Packet-Type == Access-Challenge))  =
handled

(21)   } # Auth-Type eap = handled

(21) Using Post-Auth-Type Challenge

(21) # Executing group from file /etc/raddb/sites-enabled/default

(21)   Challenge { ... } # empty sub-section is ignored

(21) session-state: Saving cached attributes

(21)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"

(21)   TLS-Session-Version = "TLS 1.2"

(21) Sent Access-Challenge Id 195 from 10.101.0.20:1812 to 10.100.0.50:1645
length 0

(21)   EAP-Message =
0x010b002e190017030300235bc3632e6b443564d2723008ae0ef670403b61176bfb8668e1ff
44cb3c02f7217871f0

(21)   Message-Authenticator = 0x00000000000000000000000000000000

(21)   State = 0x5709dc2c5e02c55d080b76220813d0d4

(21) Finished request

Waking up in 2.0 seconds.

(22) Received Access-Request Id 196 from 10.100.0.50:1645 to
10.101.0.20:1812 length 249

(22)   User-Name = "test"

(22)   Service-Type = Framed-User

(22)   Framed-MTU = 1500

(22)   Called-Station-Id = "24-01-C7-8E-84-86"

(22)   Calling-Station-Id = "74-78-27-1B-F2-78"

(22)   EAP-Message =
0x020b002e19001703030023000000000000000445fbfc432839d0f47cc453ff5500e022d602
41ef8e33106eda0936

(22)   Message-Authenticator = 0x7ca959931442315cd10d49eb490df5db

(22)   Cisco-AVPair = "audit-session-id=0A6400320000003EB2ADB5C7"

(22)   NAS-Port-Type = Ethernet

(22)   NAS-Port = 50006

(22)   NAS-Port-Id = "GigabitEthernet0/6"

(22)   State = 0x5709dc2c5e02c55d080b76220813d0d4

(22)   NAS-IP-Address = 10.100.0.50

(22) Restoring &session-state

(22)   &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"

(22)   &session-state:TLS-Session-Version = "TLS 1.2"

(22) # Executing section authorize from file
/etc/raddb/sites-enabled/default

(22)   authorize {

(22)     policy filter_username {

(22)       if (&User-Name) {

(22)       if (&User-Name)  -> TRUE

(22)       if (&User-Name)  {

(22)         if (&User-Name =~ / /) {

(22)         if (&User-Name =~ / /)  -> FALSE

(22)         if (&User-Name =~ /@[^@]*@/ ) {

(22)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(22)         if (&User-Name =~ /\.\./ ) {

(22)         if (&User-Name =~ /\.\./ )  -> FALSE

(22)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(22)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE

(22)         if (&User-Name =~ /\.$/)  {

(22)         if (&User-Name =~ /\.$/)   -> FALSE

(22)         if (&User-Name =~ /@\./)  {

(22)         if (&User-Name =~ /@\./)   -> FALSE

(22)       } # if (&User-Name)  = notfound

(22)     } # policy filter_username = notfound

(22)     [preprocess] = ok

(22)     [chap] = noop

(22)     [mschap] = noop

(22)     [digest] = noop

(22) suffix: Checking for suffix after "@"

(22) suffix: No '@' in User-Name = "test", looking up realm NULL

(22) suffix: No such realm "NULL"

(22)     [suffix] = noop

(22) eap: Peer sent EAP Response (code 2) ID 11 length 46

(22) eap: Continuing tunnel setup

(22)     [eap] = ok

(22)   } # authorize = ok

(22) Found Auth-Type = eap

(22) # Executing group from file /etc/raddb/sites-enabled/default

(22)   Auth-Type eap {

(22) eap: Expiring EAP session with state 0x1aff00fb1ef9150b

(22) eap: Finished EAP session with state 0x5709dc2c5e02c55d

(22) eap: Previous EAP request found for state 0x5709dc2c5e02c55d, released
from the list

(22) eap: Peer sent packet with method EAP PEAP (25)

(22) eap: Calling submodule eap_peap to process data

(22) eap_peap: Continuing EAP-TLS

(22) eap_peap: [eaptls verify] = ok

(22) eap_peap: Done initial handshake

(22) eap_peap: [eaptls process] = ok

(22) eap_peap: Session established.  Decoding tunneled attributes

(22) eap_peap: PEAP state send tlv success

(22) eap_peap: Received EAP-TLV response

(22) eap_peap: Success

(22) eap: Sending EAP Success (code 3) ID 11 length 4

(22) eap: Freeing handler

(22)     [eap] = ok

(22)     if (handled && (Response-Packet-Type == Access-Challenge)) {

(22)     if (handled && (Response-Packet-Type == Access-Challenge))  ->
FALSE

(22)   } # Auth-Type eap = ok

(22) # Executing section post-auth from file
/etc/raddb/sites-enabled/default

(22)   post-auth {

(22)     if (session-state:User-Name && reply:User-Name && request:User-Name
&& (reply:User-Name == request:User-Name)) {

(22)     if (session-state:User-Name && reply:User-Name && request:User-Name
&& (reply:User-Name == request:User-Name))  -> FALSE

(22)     update {

(22)       &reply::TLS-Session-Cipher-Suite +=
&session-state:TLS-Session-Cipher-Suite[*] -> 'ECDHE-RSA-AES256-GCM-SHA384'

(22)       &reply::TLS-Session-Version +=
&session-state:TLS-Session-Version[*] -> 'TLS 1.2'

(22)     } # update = noop

(22)     [exec] = noop

(22)     policy remove_reply_message_if_eap {

(22)       if (&reply:EAP-Message && &reply:Reply-Message) {

(22)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE

(22)       else {

(22)         [noop] = noop

(22)       } # else = noop

(22)     } # policy remove_reply_message_if_eap = noop

(22)   } # post-auth = noop

(22) Login OK: [test] (from client swi_said_edward_p173 port 50006 cli
74-78-27-1B-F2-78)

(22) Sent Access-Accept Id 196 from 10.101.0.20:1812 to 10.100.0.50:1645
length 0

(22)   MS-MPPE-Recv-Key =
0xb3963e8d4a98a9a2b83fc3463f4aee62e926bbe31e9fab554887fbef5efce59d

(22)   MS-MPPE-Send-Key =
0xe659945053c03ec5ae6b8b0ceef6fa83d90c3718f2a69f013f86f3870e5349ed

(22)   EAP-Message = 0x030b0004

(22)   Message-Authenticator = 0x00000000000000000000000000000000

(22)   User-Name = "test"

(22) Finished request

Waking up in 2.0 seconds.

(23) Received Accounting-Request Id 61 from 10.100.0.50:1646 to
10.101.0.20:1813 length 217

(23)   Acct-Session-Id = "0000006D"

(23)   Cisco-AVPair = "audit-session-id=0A6400320000003EB2ADB5C7"

(23)   User-Name = "test"

(23)   Cisco-AVPair = "connect-progress=Call Up"

(23)   Acct-Authentic = RADIUS

(23)   Acct-Status-Type = Start

(23)   NAS-Port-Type = Ethernet

(23)   NAS-Port = 50006

(23)   NAS-Port-Id = "GigabitEthernet0/6"

(23)   Called-Station-Id = "24-01-C7-8E-84-86"

(23)   Calling-Station-Id = "74-78-27-1B-F2-78"

(23)   Service-Type = Framed-User

(23)   NAS-IP-Address = 10.100.0.50

(23)   Acct-Delay-Time = 0

(23) # Executing section preacct from file /etc/raddb/sites-enabled/default

(23)   preacct {

(23)     [preprocess] = ok

(23)     policy acct_unique {

(23)       update request {

(23)         &Tmp-String-9 := "ai:"

(23)       } # update request = noop

(23)       if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) {

(23)       EXPAND %{hex:&Class}

(23)          --> 

(23)       EXPAND ^%{hex:&Tmp-String-9}

(23)          --> ^61693a

(23)       if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i))  -> FALSE

(23)       else {

(23)         update request {

(23)           EXPAND
%{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Addres
s}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}

(23)              --> ec3bf2e33c3293d656fc4362227660f2

(23)           &Acct-Unique-Session-Id := ec3bf2e33c3293d656fc4362227660f2

(23)         } # update request = noop

(23)       } # else = noop

(23)     } # policy acct_unique = noop

(23) suffix: Checking for suffix after "@"

(23) suffix: No '@' in User-Name = "test", looking up realm NULL

(23) suffix: No such realm "NULL"

(23)     [suffix] = noop

(23)     [files] = noop

(23)   } # preacct = ok

(23) # Executing section accounting from file
/etc/raddb/sites-enabled/default

(23)   accounting {

(23) detail: EXPAND
/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addres
s}}/detail-%Y%m%d

(23) detail:    --> /var/log/radius/radacct/10.100.0.50/detail-20220725

(23) detail:
/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addres
s}}/detail-%Y%m%d expands to
/var/log/radius/radacct/10.100.0.50/detail-20220725

(23) detail: EXPAND %t

(23) detail:    --> Mon Jul 25 18:16:45 2022

(23)     [detail] = ok

(23)     [unix] = ok

(23) radutmp: EXPAND /var/log/radius/radutmp

(23) radutmp:    --> /var/log/radius/radutmp

(23) radutmp: EXPAND %{User-Name}

(23) radutmp:    --> test

(23)     [radutmp] = ok

(23) sradutmp: EXPAND /var/log/radius/sradutmp

(23) sradutmp:    --> /var/log/radius/sradutmp

(23) sradutmp: EXPAND %{User-Name}

(23) sradutmp:    --> test

(23)     [sradutmp] = ok

(23)     [exec] = noop

(23) attr_filter.accounting_response: EXPAND %{User-Name}

(23) attr_filter.accounting_response:    --> test

(23) attr_filter.accounting_response: Matched entry DEFAULT at line 12

(23)     [attr_filter.accounting_response] = updated

(23)   } # accounting = updated

(23) Sent Accounting-Response Id 61 from 10.101.0.20:1813 to
10.100.0.50:1646 length 0

(23) Finished request

(23) Cleaning up request packet ID 61 with timestamp +68

Waking up in 0.8 seconds.

(12) Cleaning up request packet ID 186 with timestamp +64

(13) Cleaning up request packet ID 187 with timestamp +64

(14) Cleaning up request packet ID 188 with timestamp +64

(15) Cleaning up request packet ID 189 with timestamp +64

(16) Cleaning up request packet ID 190 with timestamp +64

(17) Cleaning up request packet ID 191 with timestamp +64

Waking up in 2.7 seconds.

(18) Cleaning up request packet ID 192 with timestamp +67

(19) Cleaning up request packet ID 193 with timestamp +67

(20) Cleaning up request packet ID 194 with timestamp +67

(21) Cleaning up request packet ID 195 with timestamp +67

(22) Cleaning up request packet ID 196 with timestamp +67

Ready to process requests

EAP-TTLS not working on windows 11 for a wired usage

florentvercourt＠gmail.com