On Fri, Jun 14, 2013 at 3:33 PM, Iliya Peregoudov <iperegudov@cboss.ru>wrote:
On 14.06.2013 5:56, geebs wrote:
rad_recv: Access-Request packet from host 10.8.13.254 port 1645, id=6, length=220 User-Name = "example.com <http://example.com>"
User-Password = "cisco" Calling-Station-Id = "GigabitEthernet 14/0/3.31010096:3101-96#**587204450###pppoe 00:04:ed:d1:78:85#QTNITE4025M atm 1/1/04/27:8.35#" Connect-Info = "1000000000" NAS-Port-Type = Virtual NAS-Port = 501 NAS-Port-Id = "Uniq-Sess-ID501" Service-Type = Outbound-User NAS-IP-Address = 10.8.13.254
Looks line Cisco PPPoE service profile request http://www.cisco.com/en/US/**docs/ios-xml/ios/bbdsl/** configuration/12-4t/bba-svc-**callstup.html<http://www.cisco.com/en/US/docs/ios-xml/ios/bbdsl/configuration/12-4t/bba-svc-callstup.html> - List info/subscribe/unsubscribe? See http://www.freeradius.org/** list/users.html <http://www.freeradius.org/list/users.html>
Yes it is, I'm not sure what's going on there, but to be honest this is not the major issue. The problem is that michaelr@example.com does initially connect, but then gets disconnected... If you have a look at the 1st post, they connect fine, but then get booted, and the only thing in the logs is the above. What would cause this ?