I ported the old Users 2.x file over to 3.x, but getting the following error. I'm thinking it's \" is causing issues. Did version 3.x change the way to include " " in the string? Thanks, Norman May 18 16:49:49 server01 radiusd[29811]: reading pairlist file /etc/raddb/mods-config/files/authorize May 18 16:49:49 server01 radiusd[29811]: /etc/raddb/mods-config/files/authorize[20]: Parse error (reply) for entry DEFAULT: Expected end of ...or comma May 18 16:49:49 server01 radiusd[29811]: Failed reading /etc/raddb/mods-config/files/authorize May 18 16:49:49 server01 radiusd[29811]: /etc/raddb/mods-enabled/files[9]: Instantiation failed for module "files" # # The rest of this file contains the several DEFAULT entries. # DEFAULT entries match with all login names. # Note that DEFAULT entries can also Fall-Through (see first entry). # A name-value pair from a DEFAULT entry will _NEVER_ override # an already existing name-value pair. # # # First setup all accounts to be checked against the UNIX /etc/passwd. # (Unless a password was already given earlier in this file). # DEFAULT Group == users-ro, Auth-Type = System Service-Type = NAS-Prompt-User, cisco-avpair := "shell:priv-lvl=7" DEFAULT Group == users-rw, Auth-Type = System Service-Type = NAS-Prompt-User, cisco-avpair := "shell:roles*\"network-admin vdc-admin\"", cisco-avpair += "shell:priv-lvl=15" DEFAULT Group == usersb-ro, Auth-Type = System Service-Type = NAS-Prompt-User, cisco-avpair := "shell:roles=usersb"