Hello, While I resolved my previous issue with radiusd segfaulting, I'm now running in to a new issue. I'm attempting to have my Linksys WRT54GL (running DD-WRT v23 SP2) use WPA RADIUS against a FreeRADIUS server (FreeRADIUS Version 1.1.7, for host i686-pc-linux-gnu) and subsequently have the FreeRADIUS server use our existing LDAP directory (OpenLDAP v2.2.13-4). When a user tries to connect to the access point and the access point contacts the radius server, the following happens: Ready to process requests. rad_recv: Access-Request packet from host 192.168.42.23:2050, id=0, length=129 User-Name = "rpugatch" NAS-IP-Address = 192.168.42.23 Called-Station-Id = "0018f8c16a5a" Calling-Station-Id = "0017f2e7032a" NAS-Identifier = "0018f8c16a5a" NAS-Port = 14 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0200000d017270756761746368 Message-Authenticator = 0xe1b0b05b118ebe49d6b79b7569de75b1 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 rlm_ldap: - authorize rlm_ldap: Attribute "User-Name" is required for authentication. modcall[authorize]: module "ldap" returns invalid for request 0 modcall: leaving group authorize (returns invalid) for request 0 Delaying request 0 for 1 seconds Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- This is most likely an issue with my configuration, however, I'm not sure what the issue is. I'd appreciate any help I can get. Thanks, Ryan