12 Feb
2014
12 Feb
'14
4:29 a.m.
Greetings FreeRADIUS would only respond if you have NAS entry, else silently ignored. this is what i can say if you have ping connectivity. XXX should tell the story as well. Thanks / RM -- On Wed, Feb 12, 2014 at 8:42 AM, Vijay <amitbutere64@gmail.com> wrote: > Hello Michael, > > Telnet was just to verify traffic is reaching on radius server or not . > there's nothing to do with freeradius running on which port. > > > > Sent from my iPhone > > On 12-Feb-2014, at 1:41 PM, Michael Lecuyer <mjl@iterpacis.org> wrote: > > > > > > > On 2/12/2014 2:41 AM, Vijay wrote: > >> Hi Rishabh, > >> I don't think anybody here can help until they see acess-request reaches > >> radius server. > >> > >> Mean while you do the following. > >> On radius server > >> Run tcpdump listening for src ip as your nas ip. > >> From your nas device > >> Telnet to radius server ip on port 1812 > > > > You can't telnet to a RADIUS server which uses UDP. You'll get > 'connection refused' which means nothing in this test since there is no > RADIUS TCP port. > > > > tcpdump will show traffic but you will have to run it BOTH the server > and the NAS end to demonstrate end to end connectivity. > > > >> > >> This will show if any traffic reaching to radius server. > >> > >> Or either your nas sending request on different ports which radius > >> server expects on. > >> > >> > >> Sent from my iPhone > >> > >> On 12-Feb-2014, at 12:28 PM, "Rishabh.Shukla" > >> <rishabh.shukla@i-link.co.in <mailto:rishabh.shukla@i-link.co.in>> > wrote: > >> > >>> Hi, > >>> > >>> Thank you for your reply. I would like to highlight that I have > >>> checked that the switch and the radius server can ping each other. > >>> Moreover, they are on the same network and the routing also works. > >>> Hence, to me it does not seem like a network issue. > >>> > >>> I would greatly appreciate any further help in this regard. > >>> > >>> Thanks Again. > >>> > >>> > ------------------------------------------------------------------------------------------- > >>> Best Regards, > >>> Rishabh > >>> > >>> On 2/12/2014 12:06 PM, Rishabh.Shukla wrote: > >>> > >>> ----- Forwarded Message ----- > >>> From: "HCC Mailing Lists"<hcc.lists@gmail.com> > >>> To: "FreeRadius users mailing list"< > freeradius-users@lists.freeradius.org> > >>> Sent: Monday, February 10, 2014 8:25:59 PM > >>> Subject: RE: Radius Issue, No response from server > >>> > >>> I may be stating the obvious, but since you have done the > >>> configuration perfectly and the packets are not reaching the RADIUS > >>> server you might check the configuration of the switch and the > network > >>> to make sure they can reach each other. > >>> > >>> -----Original Message----- > >>> From: freeradius-users- > >>> bounces+hcc.lists=gmail.com@lists.freeradius.org [mailto: > freeradius- > >>> users-bounces+hcc.lists=gmail.com@lists.freeradius.org] On > Behalf Of > >>> Rishabh.Shukla > >>> Sent: Monday, February 10, 2014 09:11 > >>> To:freeradius-users@lists.freeradius.org > >>> Cc: Hiren Patel; Ronak Shah > >>> Subject: Radius Issue, No response from server > >>> > >>> Hello, > >>> > >>> I have deployed radius server + daloradius + MySQL in centos 6 > and > >>> > >>> all > >>> > >>> configuration is done perfectly. I have added HP ProCurve switch > >>> > >>> 3400 > >>> > >>> CL as my NAS for sending authentication requests. The > scenarios is > >>> this: the server is responding and accepting the packets > locally but > >>> when I try to authenticate through the HP ProCurve switch the > server > >>> does not respond. > >>> > >>> I have also stopped the iptables services still radius server > is not > >>> listening and during debug we found that the request is not even > >>> reaching radius server and moreover I am not getting any error > >>> message at all. > >>> > >>> I will be grateful if anybody can help me out to overcome this > >>> > >>> problem. > >>> > >>> Thanks and regards > >>> Rishabh. > >>> - > >>> List info/subscribe/unsubscribe? See > >>> http://www.freeradius.org/list/users.html > >>> > >>> - > >>> List info/subscribe/unsubscribe? Seehttp:// > www.freeradius.org/list/users.html > >>> > >>> > >>> > >>> - > >>> List info/subscribe/unsubscribe? See > >>> http://www.freeradius.org/list/users.html > >> > >> > >> - > >> List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > >> > > > > - > > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html >