Incorrect reply rlm_python with tagged attributes I've created python authorization module. It based on example provided by vendor. At first glance it works well but when trying to perform testing with radtest reply is: ... User-Password = "testing123" NAS-IP-Address = 127.0.1.1 NAS-Port = 0 Message-Authenticator = 0x00 Cleartext-Password = "testing123" Received Access-Accept Id 188 from 127.0.0.1:1812 to 0.0.0.0:0 length 48 ERX-Service-Activate:0 = "svc-local-ipoe" There is only one ERX-Service-Activate:0 with strange zero? Python function def authorize(p) has reply tuple: reply = (('Framed-IP-Address', str(client.ipv4)), ('ERX-Service-Activate:1', 'svc-local-ipoe'), ('ERX-Service-Activate:2', 'svc-local-ipoe(%s)' % str(client.speed_localnet)), ('ERX-Service-Activate:3', 'svc-foreign-ipoe(%s,%s)' % (str(client.speed_foreign), str(client.speed_localnet))),) Of course radius started in debug mode, and radiusd -X shows me another output: authorize - 'reply:Framed-IP-Address' = '10.0.0.1' authorize - 'reply:ERX-Service-Activate:3' = 'svc-local-ipoe' authorize - 'reply:ERX-Service-Activate:4' = 'svc-localnet-ipoe(110000)' authorize - 'reply:ERX-Service-Activate:5' = 'svc-foreignnet-ipoe(110000,110000)' authorize - 'config:Auth-Type' = 'Accept' authorize - 'config:Cleartext-Password' = 'testing123' How to get all ERX-Service-Activate tagged attributes, not the strange with zero. P.S. Reply in Wireshark shown only one ERX-Service-Activate attribute too in reply packet. P.P.S. Maybe I've construct reply with tag incorrectly? But I can find no additional information about this.