Radtest does not run through the inner-tunnel though. inner-tunnel is only invoked if you do an EAP authentication, and considering that radtest does not speak EAP (eapol_test does), you're testing the outer tunnel, i.e. the 'default' server. I set the IP address to "127.0.0.1:18120" and the debug output is : server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel Doesn't that means it run trough the inner-tunnel ? If you connect to localhost on port 18120 and it works, then you're testing the inner-tunnel server. What do you mean by "connect" ? Also, as much as you're sending us the FR debug output for the request, you haven't sent the *full* debug output that gives us clues as to what the rest of your configuration looks like. I thought i sent the full debug output. I copy/paste all the output from freeradius -X. Do you want me to copy/paste my configurations files like i did with the "clients" file ? Sorry if I did not clearly understand your explanations. My English is maybe not good enough.
Regards, - - Benjamin Dupalut Administrateur systeme et reseau Service des Moyens Informatiques Generaux (SMIG) ESIEE Paris 2 bd Blaise Pascal - 93162 Noisy-le-Grand Cedex T : +33 1 45 92 66 17 [1]benjamin.dupalut@esiee.fr [2]www.esiee.fr / [3]www.cci-paris-idf.fr References 1. mailto:benjamin.dupalut@esiee.fr 2. http://www.esiee.fr/ 3. http://www.cci-paris-idf.fr/