Re: EAP-TEAP not doing 2nd inner Method

5 Dec 2024

      ...
So let's try some FreeRADIUS configuration magic.  This is undocumented
right now, because "TEAP", but here goes:
I had to change this:

* eap {       ok = return       # updated = return  }*

to this:

* eap {       # ok = return       updated = return}*
in the "authorize" section of my default server, because "eap" always
returned "ok" which led to this:

* if (&EAP-Type == TEAP &&
!(&session-state:FreeRADIUS-EAP-TEAP-Identity-Type)) {       update
session-state {                &FreeRADIUS-EAP-TEAP-Identity-Type :=
Machine       } }*
never being executed.
But after that, EAP-TEAP actually finally did work. Yay!

In the interest of *not* hating people who use TEAP, I've pushed some
...
patches.  They are "compile tested", but I haven't had time to do full TEAP
tests.
...
Please test and see if they work.
- It looks like the server does not accept multiple values in
"identity_types":
       /etc/freeradius-server-3.2.x/raddb/mods-enabled/eap[1145]: Invalid
value in identity_types = 'machine,user'
       rlm_eap (EAP): Failed to initialise rlm_eap_teap
       /etc/freeradius-server-3.2.x/raddb/mods-enabled/eap[14]:
Instantiation failed for module "eap"

- even though the server will start when I only give "machine" or "user",
it will ignore whatever is given there and do "machine,user"

- when doing "machine,user", the server throws an error after the machine
is authenticated
       (13) eap_teap: Crypto-Binding TLV version mis-match (possible
downgrade attack!)
       (13) eap: ERROR: Failed continuing EAP TEAP (55) session.  EAP
sub-module failed

This is the complete debug output

FreeRADIUS Version 3.2.7
Copyright (C) 1999-2023 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/local/share/freeradius/dictionary
including dictionary file /usr/local/share/freeradius/dictionary.dhcp
including dictionary file /usr/local/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius-server-3.2.x/raddb/dictionary
including configuration file /etc/freeradius-server-3.2.x/raddb/radiusd.conf
including configuration file /etc/freeradius-server-3.2.x/raddb/clients.conf
including files in directory
/etc/freeradius-server-3.2.x/raddb/mods-enabled/
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/always
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/attr_filter
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/chap
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/date
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/detail
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/detail.log
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/digest
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/dynamic_clients
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/eap
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/echo
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/exec
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/expiration
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/expr
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/files
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/linelog
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/logintime
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/mschap
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/ntlm_auth
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/pap
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/passwd
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/preprocess
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/radutmp
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/realm
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/replicate
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/soh
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/sradutmp
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/totp
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/unix
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/unpack
including configuration file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/utf8
including files in directory /etc/freeradius-server-3.2.x/raddb/policy.d/
including configuration file
/etc/freeradius-server-3.2.x/raddb/policy.d/abfab-tr
including configuration file
/etc/freeradius-server-3.2.x/raddb/policy.d/accounting
including configuration file
/etc/freeradius-server-3.2.x/raddb/policy.d/canonicalization
including configuration file
/etc/freeradius-server-3.2.x/raddb/policy.d/control
including configuration file /etc/freeradius-server-3.2.x/raddb/policy.d/cui
including configuration file
/etc/freeradius-server-3.2.x/raddb/policy.d/debug
including configuration file
/etc/freeradius-server-3.2.x/raddb/policy.d/dhcp
including configuration file /etc/freeradius-server-3.2.x/raddb/policy.d/eap
including configuration file
/etc/freeradius-server-3.2.x/raddb/policy.d/filter
including configuration file
/etc/freeradius-server-3.2.x/raddb/policy.d/moonshot-targeted-ids
including configuration file
/etc/freeradius-server-3.2.x/raddb/policy.d/operator-name
including configuration file
/etc/freeradius-server-3.2.x/raddb/policy.d/rfc7542
including files in directory
/etc/freeradius-server-3.2.x/raddb/sites-enabled/
including configuration file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
including configuration file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/inner-tunnel
main {
 security {
        allow_core_dumps = no
 }
        name = "radiusd"
        prefix = "/usr/local"
        localstatedir = "/usr/local/var"
        logdir = "/usr/local/var/log/radius"
        run_dir = "/usr/local/var/run/radiusd"
}
main {
        name = "radiusd"
        prefix = "/usr/local"
        localstatedir = "/usr/local/var"
        sbindir = "/usr/local/sbin"
        logdir = "/usr/local/var/log/radius"
        run_dir = "/usr/local/var/run/radiusd"
        libdir = "/usr/local/lib"
        radacctdir = "/usr/local/var/log/radius/radacct"
        hostname_lookups = no
        max_request_time = 30
        proxy_dedup_window = 1
        cleanup_delay = 5
        max_requests = 16384
        max_fds = 512
        postauth_client_lost = no
        pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
        checkrad = "/usr/local/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
        colourise = yes
        msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
        max_attributes = 200
        reject_delay = 1.000000
        status_server = yes
        require_message_authenticator = "auto"
        limit_proxy_state = "auto"
        allow_vulnerable_openssl = "no"
 }
}
radiusd: #### Loading Realms and Home Servers ####
radiusd: #### Loading Clients ####
 client localhost {
        ipaddr = 127.0.0.1
        secret = <<< secret >>>
        nas_type = "other"
        proto = "*"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 900
  }
 }
Shared secret for client localhost is short, and likely can be broken by an
attacker.
 client 0.0.0.0/0 {
        ipaddr = 0.0.0.0/0
        secret = <<< secret >>>
        proto = "*"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
Shared secret for client 0.0.0.0/0 is short, and likely can be broken by an
attacker.
Debugger not attached
Configuration version: d680-7b25-19cb-e520
 # Creating Auth-Type = mschap
 # Creating Auth-Type = digest
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Autz-Type = New-TLS-Connection
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_always
  # Loading module "reject" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/always
  always reject {
        rcode = "reject"
        simulcount = 0
        mpp = no
  }
  # Loading module "fail" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/always
  always fail {
        rcode = "fail"
        simulcount = 0
        mpp = no
  }
  # Loading module "ok" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/always
  always ok {
        rcode = "ok"
        simulcount = 0
        mpp = no
  }
  # Loading module "handled" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/always
  always handled {
        rcode = "handled"
        simulcount = 0
        mpp = no
  }
  # Loading module "invalid" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/always
  always invalid {
        rcode = "invalid"
        simulcount = 0
        mpp = no
  }
  # Loading module "userlock" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/always
  always userlock {
        rcode = "userlock"
        simulcount = 0
        mpp = no
  }
  # Loading module "notfound" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/always
  always notfound {
        rcode = "notfound"
        simulcount = 0
        mpp = no
  }
  # Loading module "noop" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/always
  always noop {
        rcode = "noop"
        simulcount = 0
        mpp = no
  }
  # Loading module "updated" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/always
  always updated {
        rcode = "updated"
        simulcount = 0
        mpp = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
        filename =
"/etc/freeradius-server-3.2.x/raddb/mods-config/attr_filter/post-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
        filename =
"/etc/freeradius-server-3.2.x/raddb/mods-config/attr_filter/pre-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
        filename =
"/etc/freeradius-server-3.2.x/raddb/mods-config/attr_filter/access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
        filename =
"/etc/freeradius-server-3.2.x/raddb/mods-config/attr_filter/access_challenge"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
        filename =
"/etc/freeradius-server-3.2.x/raddb/mods-config/attr_filter/accounting_response"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.coa" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.coa {
        filename =
"/etc/freeradius-server-3.2.x/raddb/mods-config/attr_filter/coa"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/chap
  # Loaded module rlm_date
  # Loading module "date" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/date
  date {
        format = "%b %e %Y %H:%M:%S %Z"
        utc = no
  }
  # Loading module "wispr2date" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/date
  date wispr2date {
        format = "%Y-%m-%dT%H:%M:%S"
        utc = no
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/detail
  detail {
        filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        dates_as_integer = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "auth_log" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/detail.log
  detail auth_log {
        filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        dates_as_integer = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "reply_log" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/detail.log
  detail reply_log {
        filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        dates_as_integer = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
        filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        dates_as_integer = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "post_proxy_log" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/detail.log
  detail post_proxy_log {
        filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        dates_as_integer = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/digest
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_eap
  # Loading module "eap" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/eap
  eap {
        default_eap_type = "teap"
        timer_expire = 60
        max_eap_type = 52
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 16384
        dedup_key = ""
  }
  # Loaded module rlm_exec
  # Loading module "echo" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/echo
  exec echo {
        wait = yes
        program = "/bin/echo %{User-Name}"
        input_pairs = "request"
        output_pairs = "reply"
        shell_escape = yes
  }
  # Loading module "exec" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
        timeout = 10
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/expiration
  # Loaded module rlm_expr
  # Loading module "expr" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/expr
  expr {
        safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_files
  # Loading module "files" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/files
  files {
        filename =
"/etc/freeradius-server-3.2.x/raddb/mods-config/files/authorize"
        acctusersfile =
"/etc/freeradius-server-3.2.x/raddb/mods-config/files/accounting"
        preproxy_usersfile =
"/etc/freeradius-server-3.2.x/raddb/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/linelog
  linelog {
        filename = "/usr/local/var/log/radius/linelog"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = "This is a log message for %{User-Name}"
        reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/linelog
  linelog log_accounting {
        filename = "/usr/local/var/log/radius/linelog-accounting"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = ""
        reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/logintime
  logintime {
        minimum_timeout = 60
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = yes
   passchange {
   }
        allow_retry = yes
        winbind_retry_with_normalised_username = no
  }
  # Loading module "ntlm_auth" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
        wait = yes
        program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
        shell_escape = yes
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/pap
  pap {
        normalise = yes
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/passwd
  passwd etc_passwd {
        filename = "/etc/passwd"
        format = "*User-Name:Crypt-Password:"
        delimiter = ":"
        ignore_nislike = no
        ignore_empty = yes
        allow_multiple_keys = no
        hash_size = 100
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/preprocess
  preprocess {
        huntgroups =
"/etc/freeradius-server-3.2.x/raddb/mods-config/preprocess/huntgroups"
        hints =
"/etc/freeradius-server-3.2.x/raddb/mods-config/preprocess/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/radutmp
  radutmp {
        filename = "/usr/local/var/log/radius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 384
        caller_id = yes
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/realm
  realm IPASS {
        format = "prefix"
        delimiter = "/"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "suffix" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "bangpath" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/realm
  realm bangpath {
        format = "prefix"
        delimiter = "!"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "realmpercent" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/realm
  realm realmpercent {
        format = "suffix"
        delimiter = "%"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "ntdomain" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/realm
  realm ntdomain {
        format = "prefix"
        delimiter = "\"
        ignore_default = no
        ignore_null = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/replicate
  # Loaded module rlm_soh
  # Loading module "soh" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/soh
  soh {
        dhcp = yes
  }
  # Loading module "sradutmp" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
        filename = "/usr/local/var/log/radius/sradutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 420
        caller_id = no
  }
  # Loaded module rlm_totp
  # Loading module "totp" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/totp
  totp {
        time_step = 30
        otp_length = 6
        lookback_steps = 1
        lookback_interval = 30
        lookforward_steps = 0
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/unix
  unix {
        radwtmp = "/usr/local/var/log/radius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_unpack
  # Loading module "unpack" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/unpack
  # Loaded module rlm_utf8
  # Loading module "utf8" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/utf8
  instantiate {
  }
  # Instantiating module "reject" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/always
  # Instantiating module "fail" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/always
  # Instantiating module "ok" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/always
  # Instantiating module "handled" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/always
  # Instantiating module "invalid" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/always
  # Instantiating module "userlock" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/always
  # Instantiating module "notfound" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/always
  # Instantiating module "noop" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/always
  # Instantiating module "updated" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/always
  # Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius-server-3.2.x/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius-server-3.2.x/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius-server-3.2.x/raddb/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius-server-3.2.x/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius-server-3.2.x/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "attr_filter.coa" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius-server-3.2.x/raddb/mods-config/attr_filter/coa
  # Instantiating module "detail" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/detail
  # Instantiating module "auth_log" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/detail.log
  # Instantiating module "eap" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_gtc
   gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
        tls = "tls-common"
   }
   tls-config tls-common {
        verify_depth = 0
        ca_path = "/etc/freeradius-server-3.2.x/raddb/certs/teap"
        pem_file_type = yes
        private_key_file =
"/etc/freeradius-server-3.2.x/raddb/certs/teap/server.pem"
        certificate_file =
"/etc/freeradius-server-3.2.x/raddb/certs/teap/server.pem"
        ca_file = "/etc/freeradius-server-3.2.x/raddb/certs/teap/ca.pem"
        private_key_password = <<< secret >>>
        fragment_size = 1024
        include_length = yes
        auto_chain = yes
        check_crl = no
        check_all_crl = no
        ca_path_reload_interval = 0
        cipher_list = "DEFAULT"
        cipher_server_preference = no
        reject_unknown_intermediate_ca = no
        ecdh_curve = ""
        tls_max_version = "1.2"
        tls_min_version = "1.2"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
    verify {
        skip_if_ocsp_ok = no
    }
    ocsp {
        enable = no
        override_cert_url = yes
        url = "http://127.0.0.1/ocsp/"
        use_nonce = yes
        timeout = 0
        softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
        tls = "tls-common"
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        virtual_server = "inner-tunnel"
        include_length = yes
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
        tls = "tls-common"
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
        soh = no
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
        with_ntdomain_hack = no
        send_error = no
   }
   # Linked to sub-module rlm_eap_teap
   teap {
        tls = "tls-common"
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        require_client_cert = no
        authority_identity = "1234"
        virtual_server = "inner-tunnel"
        identity_types = "user"
        user_eap_type = "tls"
        machine_eap_type = "tls"
   }
tls: Using cached TLS configuration from previous invocation
  # Instantiating module "expiration" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/expiration
  # Instantiating module "files" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/files
reading pairlist file
/etc/freeradius-server-3.2.x/raddb/mods-config/files/authorize
reading pairlist file
/etc/freeradius-server-3.2.x/raddb/mods-config/files/accounting
reading pairlist file
/etc/freeradius-server-3.2.x/raddb/mods-config/files/pre-proxy
  # Instantiating module "linelog" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/linelog
  # Instantiating module "logintime" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/logintime
  # Instantiating module "mschap" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "pap" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/pap
  # Instantiating module "etc_passwd" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "preprocess" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/preprocess
reading pairlist file
/etc/freeradius-server-3.2.x/raddb/mods-config/preprocess/huntgroups
reading pairlist file
/etc/freeradius-server-3.2.x/raddb/mods-config/preprocess/hints
  # Instantiating module "IPASS" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/realm
  # Instantiating module "bangpath" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/realm
  # Instantiating module "totp" from file
/etc/freeradius-server-3.2.x/raddb/mods-enabled/totp
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius-server-3.2.x/raddb/radiusd.conf
} # server
server default { # from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
 # Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
Compiling Autz-Type New-TLS-Connection for attr Autz-Type
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
Compiling Post-Auth-Type Challenge for attr Post-Auth-Type
Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type
} # server default
server inner-tunnel { # from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' --
/etc/freeradius-server-3.2.x/raddb/sites-enabled/inner-tunnel:366
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = *
        port = 1645
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 900
   }
}
listen {
        type = "auth"
        ipaddr = 127.0.0.1
        port = 18120
}
Listening on auth address * port 1645 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Ready to process requests
(0) Received Access-Request Id 200 from 10.78.1.215:1645 to 10.78.5.223:1645
length 254
(0)   User-Name = "anonymous"
(0)   Service-Type = Framed-User
(0)   Cisco-AVPair = "service-type=Framed"
(0)   Framed-MTU = 1500
(0)   Called-Station-Id = "00-3C-10-AB-A2-8A"
(0)   Calling-Station-Id = "C8-F7-50-08-DD-9F"
(0)   EAP-Message = 0x0201000e01616e6f6e796d6f7573
(0)   Message-Authenticator = 0x3d043f05663546bfb9c5d41139747226
(0)   Cisco-AVPair = "audit-session-id=0A4E01D7000007122D1A1862"
(0)   Cisco-AVPair = "method=dot1x"
(0)   NAS-IP-Address = 10.78.1.215
(0)   NAS-Port-Id = "GigabitEthernet1/0/10"
(0)   NAS-Port-Type = Ethernet
(0)   NAS-Port = 50110
(0) # Executing section authorize from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 1 length 14
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_teap to process data
(0) eap_teap: (TLS) TEAP -Initiating new session
(0) eap_teap: Setting &session-state:FreeRADIUS-EAP-TEAP-Identity-Type =
Machine
(0) eap: Sending EAP Request (code 1) ID 2 length 18
(0) eap: EAP session adding &reply:State = 0xb96c70f8b96e47a8
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) session-state: Saving cached attributes
(0)   Framed-MTU = 984
(0)   FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(0) Sent Access-Challenge Id 200 from 10.78.5.223:1645 to 10.78.1.215:1645
length 76
(0)   EAP-Message = 0x010200123731000000080001000431323334
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0xb96c70f8b96e47a877ea72b373cfca2f
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 201 from 10.78.1.215:1645 to 10.78.5.223:1645
length 420
(1)   User-Name = "anonymous"
(1)   Service-Type = Framed-User
(1)   Cisco-AVPair = "service-type=Framed"
(1)   Framed-MTU = 1500
(1)   Called-Station-Id = "00-3C-10-AB-A2-8A"
(1)   Calling-Station-Id = "C8-F7-50-08-DD-9F"
(1)   EAP-Message =
0x020200a23701160303009701000093030367517c7a14418682f30638db638db27d30e1d23d7340d1b30cf9dbdef2638544000024c02cc02bc030c02fc024c023c028c027c00ac009c014c013009d009c003d003c0035002f01000046000500050100000000000a00080006001d00170018000b00020100000d001a00180804080508060401050102010403050302030202060106030023000000170000ff01000100
(1)   Message-Authenticator = 0x158f47c123f97e1bfc7ceb705faa27ae
(1)   Cisco-AVPair = "audit-session-id=0A4E01D7000007122D1A1862"
(1)   Cisco-AVPair = "method=dot1x"
(1)   NAS-IP-Address = 10.78.1.215
(1)   NAS-Port-Id = "GigabitEthernet1/0/10"
(1)   NAS-Port-Type = Ethernet
(1)   NAS-Port = 50110
(1)   State = 0xb96c70f8b96e47a877ea72b373cfca2f
(1) Restoring &session-state
(1)   &session-state:Framed-MTU = 984
(1)   &session-state:FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(1) # Executing section authorize from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 2 length 162
(1) eap: Continuing tunnel setup
(1)     [eap] = ok
(1)   } # authorize = ok
(1) Found Auth-Type = eap
(1) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(1)   authenticate {
(1) eap: Removing EAP session with state 0xb96c70f8b96e47a8
(1) eap: Previous EAP request found for state 0xb96c70f8b96e47a8, released
from the list
(1) eap: Peer sent packet with method EAP TEAP (55)
(1) eap: Calling submodule eap_teap to process data
(1) eap_teap: Authenticate
(1) eap_teap: (TLS) EAP Got final fragment (156 bytes)
(1) eap_teap: WARNING: (TLS) EAP Total received record fragments (156
bytes), does not equal expected expected data length (0 bytes)
(1) eap_teap: (TLS) EAP Done initial handshake
(1) eap_teap: (TLS) TEAP - Handshake state - before SSL initialization
(1) eap_teap: (TLS) TEAP - Handshake state - Server before SSL
initialization
(1) eap_teap: (TLS) TEAP - Handshake state - Server before SSL
initialization
(1) eap_teap: (TLS) TEAP - recv TLS 1.3 Handshake, ClientHello
(1) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS read client
hello
(1) eap_teap: (TLS) TEAP - send TLS 1.2 Handshake, ServerHello
(1) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS write server
hello
(1) eap_teap: (TLS) TEAP - send TLS 1.2 Handshake, Certificate
(1) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS write
certificate
(1) eap_teap: (TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange
(1) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS write key
exchange
(1) eap_teap: (TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone
(1) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS write server
done
(1) eap_teap: (TLS) TEAP - Server : Need to read more data: SSLv3/TLS write
server done
(1) eap_teap: (TLS) TEAP - In Handshake Phase
(1) eap: Sending EAP Request (code 1) ID 3 length 994
(1) eap: EAP session adding &reply:State = 0xb96c70f8b86f47a8
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(1)   Challenge { ... } # empty sub-section is ignored
(1) session-state: Saving cached attributes
(1)   Framed-MTU = 984
(1)   FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(1)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake,
ClientHello"
(1)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHello"
(1)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Certificate"
(1)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerKeyExchange"
(1)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHelloDone"
(1) Sent Access-Challenge Id 201 from 10.78.5.223:1645 to 10.78.1.215:1645
length 1058
(1)   EAP-Message =
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
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0xb96c70f8b86f47a877ea72b373cfca2f
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 202 from 10.78.1.215:1645 to 10.78.5.223:1645
length 264
(2)   User-Name = "anonymous"
(2)   Service-Type = Framed-User
(2)   Cisco-AVPair = "service-type=Framed"
(2)   Framed-MTU = 1500
(2)   Called-Station-Id = "00-3C-10-AB-A2-8A"
(2)   Calling-Station-Id = "C8-F7-50-08-DD-9F"
(2)   EAP-Message = 0x020300063701
(2)   Message-Authenticator = 0x0c417da4d1098da92db07a6fd79032d9
(2)   Cisco-AVPair = "audit-session-id=0A4E01D7000007122D1A1862"
(2)   Cisco-AVPair = "method=dot1x"
(2)   NAS-IP-Address = 10.78.1.215
(2)   NAS-Port-Id = "GigabitEthernet1/0/10"
(2)   NAS-Port-Type = Ethernet
(2)   NAS-Port = 50110
(2)   State = 0xb96c70f8b86f47a877ea72b373cfca2f
(2) Restoring &session-state
(2)   &session-state:Framed-MTU = 984
(2)   &session-state:FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(2)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3
Handshake, ClientHello"
(2)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHello"
(2)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Certificate"
(2)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerKeyExchange"
(2)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHelloDone"
(2) # Executing section authorize from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 3 length 6
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(2)   authenticate {
(2) eap: Removing EAP session with state 0xb96c70f8b86f47a8
(2) eap: Previous EAP request found for state 0xb96c70f8b86f47a8, released
from the list
(2) eap: Peer sent packet with method EAP TEAP (55)
(2) eap: Calling submodule eap_teap to process data
(2) eap_teap: Authenticate
(2) eap_teap: (TLS) Peer ACKed our handshake fragment
(2) eap: Sending EAP Request (code 1) ID 4 length 990
(2) eap: EAP session adding &reply:State = 0xb96c70f8bb6847a8
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) session-state: Saving cached attributes
(2)   Framed-MTU = 984
(2)   FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(2)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake,
ClientHello"
(2)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHello"
(2)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Certificate"
(2)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerKeyExchange"
(2)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHelloDone"
(2) Sent Access-Challenge Id 202 from 10.78.5.223:1645 to 10.78.1.215:1645
length 1054
(2)   EAP-Message =
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
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0xb96c70f8bb6847a877ea72b373cfca2f
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 203 from 10.78.1.215:1645 to 10.78.5.223:1645
length 264
(3)   User-Name = "anonymous"
(3)   Service-Type = Framed-User
(3)   Cisco-AVPair = "service-type=Framed"
(3)   Framed-MTU = 1500
(3)   Called-Station-Id = "00-3C-10-AB-A2-8A"
(3)   Calling-Station-Id = "C8-F7-50-08-DD-9F"
(3)   EAP-Message = 0x020400063701
(3)   Message-Authenticator = 0x6f7309fe68b3131dddbfe024c577a46c
(3)   Cisco-AVPair = "audit-session-id=0A4E01D7000007122D1A1862"
(3)   Cisco-AVPair = "method=dot1x"
(3)   NAS-IP-Address = 10.78.1.215
(3)   NAS-Port-Id = "GigabitEthernet1/0/10"
(3)   NAS-Port-Type = Ethernet
(3)   NAS-Port = 50110
(3)   State = 0xb96c70f8bb6847a877ea72b373cfca2f
(3) Restoring &session-state
(3)   &session-state:Framed-MTU = 984
(3)   &session-state:FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(3)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3
Handshake, ClientHello"
(3)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHello"
(3)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Certificate"
(3)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerKeyExchange"
(3)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHelloDone"
(3) # Executing section authorize from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 4 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(3)   authenticate {
(3) eap: Removing EAP session with state 0xb96c70f8bb6847a8
(3) eap: Previous EAP request found for state 0xb96c70f8bb6847a8, released
from the list
(3) eap: Peer sent packet with method EAP TEAP (55)
(3) eap: Calling submodule eap_teap to process data
(3) eap_teap: Authenticate
(3) eap_teap: (TLS) Peer ACKed our handshake fragment
(3) eap: Sending EAP Request (code 1) ID 5 length 459
(3) eap: EAP session adding &reply:State = 0xb96c70f8ba6947a8
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(3)   Challenge { ... } # empty sub-section is ignored
(3) session-state: Saving cached attributes
(3)   Framed-MTU = 984
(3)   FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(3)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake,
ClientHello"
(3)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHello"
(3)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Certificate"
(3)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerKeyExchange"
(3)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHelloDone"
(3) Sent Access-Challenge Id 203 from 10.78.5.223:1645 to 10.78.1.215:1645
length 519
(3)   EAP-Message =
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
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0xb96c70f8ba6947a877ea72b373cfca2f
(3) Finished request
Waking up in 3.4 seconds.
(4) Received Access-Request Id 204 from 10.78.1.215:1645 to 10.78.5.223:1645
length 357
(4)   User-Name = "anonymous"
(4)   Service-Type = Framed-User
(4)   Cisco-AVPair = "service-type=Framed"
(4)   Framed-MTU = 1500
(4)   Called-Station-Id = "00-3C-10-AB-A2-8A"
(4)   Calling-Station-Id = "C8-F7-50-08-DD-9F"
(4)   EAP-Message =
0x02050063370116030300251000002120ff53fcbc9f2151f5689816dbc0de9347f407a04f8f7739a79c82c8643a5fac2914030300010116030300280000000000000000645ba6d907b7c5fae81924964fa57050b3695bc9a54a01ce82d0c6de5c42e315
(4)   Message-Authenticator = 0x8a6945814b723e68f54e4dfa1226a3f9
(4)   Cisco-AVPair = "audit-session-id=0A4E01D7000007122D1A1862"
(4)   Cisco-AVPair = "method=dot1x"
(4)   NAS-IP-Address = 10.78.1.215
(4)   NAS-Port-Id = "GigabitEthernet1/0/10"
(4)   NAS-Port-Type = Ethernet
(4)   NAS-Port = 50110
(4)   State = 0xb96c70f8ba6947a877ea72b373cfca2f
(4) Restoring &session-state
(4)   &session-state:Framed-MTU = 984
(4)   &session-state:FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(4)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3
Handshake, ClientHello"
(4)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHello"
(4)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Certificate"
(4)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerKeyExchange"
(4)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHelloDone"
(4) # Executing section authorize from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 5 length 99
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(4)   authenticate {
(4) eap: Removing EAP session with state 0xb96c70f8ba6947a8
(4) eap: Previous EAP request found for state 0xb96c70f8ba6947a8, released
from the list
(4) eap: Peer sent packet with method EAP TEAP (55)
(4) eap: Calling submodule eap_teap to process data
(4) eap_teap: Authenticate
(4) eap_teap: (TLS) EAP Done initial handshake
(4) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS write server
done
(4) eap_teap: (TLS) TEAP - recv TLS 1.2 Handshake, ClientKeyExchange
(4) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS read client
key exchange
(4) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS read change
cipher spec
(4) eap_teap: (TLS) TEAP - recv TLS 1.2 Handshake, Finished
(4) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS read finished
(4) eap_teap: (TLS) TEAP - send TLS 1.2 ChangeCipherSpec
(4) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS write change
cipher spec
(4) eap_teap: (TLS) TEAP - send TLS 1.2 Handshake, Finished
(4) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS write finished
(4) eap_teap: (TLS) TEAP - Handshake state - SSL negotiation finished
successfully
(4) eap_teap: (TLS) TEAP - Connection Established
(4) eap_teap:   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(4) eap_teap:   TLS-Session-Version = "TLS 1.2"
(4) eap: Sending EAP Request (code 1) ID 6 length 57
(4) eap: EAP session adding &reply:State = 0xb96c70f8bd6a47a8
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(4)   Challenge { ... } # empty sub-section is ignored
(4) session-state: Saving cached attributes
(4)   Framed-MTU = 984
(4)   FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(4)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake,
ClientHello"
(4)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHello"
(4)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Certificate"
(4)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerKeyExchange"
(4)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHelloDone"
(4)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake,
ClientKeyExchange"
(4)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake,
Finished"
(4)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 ChangeCipherSpec"
(4)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Finished"
(4)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(4)   TLS-Session-Version = "TLS 1.2"
(4) Sent Access-Challenge Id 204 from 10.78.5.223:1645 to 10.78.1.215:1645
length 115
(4)   EAP-Message =
0x0106003937011403030001011603030028b50c72a1ebc221f50558c30c2e67ebab9b4da32cff0b11099db52a17b551f80013a15cb0a72b1349
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0xb96c70f8bd6a47a877ea72b373cfca2f
(4) Finished request
Waking up in 3.2 seconds.
(5) Received Access-Request Id 205 from 10.78.1.215:1645 to 10.78.5.223:1645
length 264
(5)   User-Name = "anonymous"
(5)   Service-Type = Framed-User
(5)   Cisco-AVPair = "service-type=Framed"
(5)   Framed-MTU = 1500
(5)   Called-Station-Id = "00-3C-10-AB-A2-8A"
(5)   Calling-Station-Id = "C8-F7-50-08-DD-9F"
(5)   EAP-Message = 0x020600063701
(5)   Message-Authenticator = 0x6dab72d67dd8e7183614b93eb58c39cb
(5)   Cisco-AVPair = "audit-session-id=0A4E01D7000007122D1A1862"
(5)   Cisco-AVPair = "method=dot1x"
(5)   NAS-IP-Address = 10.78.1.215
(5)   NAS-Port-Id = "GigabitEthernet1/0/10"
(5)   NAS-Port-Type = Ethernet
(5)   NAS-Port = 50110
(5)   State = 0xb96c70f8bd6a47a877ea72b373cfca2f
(5) Restoring &session-state
(5)   &session-state:Framed-MTU = 984
(5)   &session-state:FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(5)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3
Handshake, ClientHello"
(5)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHello"
(5)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Certificate"
(5)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerKeyExchange"
(5)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHelloDone"
(5)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2
Handshake, ClientKeyExchange"
(5)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2
Handshake, Finished"
(5)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
ChangeCipherSpec"
(5)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Finished"
(5)   &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"
(5)   &session-state:TLS-Session-Version = "TLS 1.2"
(5) # Executing section authorize from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 6 length 6
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(5)   authenticate {
(5) eap: Removing EAP session with state 0xb96c70f8bd6a47a8
(5) eap: Previous EAP request found for state 0xb96c70f8bd6a47a8, released
from the list
(5) eap: Peer sent packet with method EAP TEAP (55)
(5) eap: Calling submodule eap_teap to process data
(5) eap_teap: Authenticate
(5) eap_teap: (TLS) Peer ACKed our handshake fragment.  handshake is
finished
(5) eap_teap: Session established.  Proceeding to decode tunneled attributes
(5) eap_teap: Using authenticated provisioning
(5) eap_teap: Using MAC SHA384 (673)
(5) eap_teap: Deriving EAP-TEAP keys
(5) eap_teap: S-IMCK[0] - hexdump(len=40): d7 b9 f3 40 1c 22 33 23 48 df 55
33 0e 4a 4c 92 1c ee 92 73 1f 07 dd 94 34 5b f8 32 bc fa c9 3f 87 36 dd 83
51 cc a6 7c
(5) eap_teap: Sending EAP-Identity
(5) eap: Sending EAP Request (code 1) ID 7 length 50
(5) eap: EAP session adding &reply:State = 0xb96c70f8bc6b47a8
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(5)   Challenge { ... } # empty sub-section is ignored
(5) session-state: Saving cached attributes
(5)   Framed-MTU = 984
(5)   FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(5)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake,
ClientHello"
(5)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHello"
(5)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Certificate"
(5)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerKeyExchange"
(5)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHelloDone"
(5)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake,
ClientKeyExchange"
(5)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake,
Finished"
(5)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 ChangeCipherSpec"
(5)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Finished"
(5)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(5)   TLS-Session-Version = "TLS 1.2"
(5) Sent Access-Challenge Id 205 from 10.78.5.223:1645 to 10.78.1.215:1645
length 108
(5)   EAP-Message =
0x0107003237011703030027b50c72a1ebc221f6d3de9503586cc20282b598cde6a7a9a11e81d30783c0ae50c16365290e9f6e
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0xb96c70f8bc6b47a877ea72b373cfca2f
(5) Finished request
Waking up in 1.9 seconds.
(6) Received Access-Request Id 206 from 10.78.1.215:1645 to 10.78.5.223:1645
length 338
(6)   User-Name = "anonymous"
(6)   Service-Type = Framed-User
(6)   Cisco-AVPair = "service-type=Framed"
(6)   Framed-MTU = 1500
(6)   Called-Station-Id = "00-3C-10-AB-A2-8A"
(6)   Calling-Station-Id = "C8-F7-50-08-DD-9F"
(6)   EAP-Message =
0x02070050370117030300450000000000000001a4970c381b552cc4b1a4800bcc202d4a839b477ca37f81a93a02f19c3f0eb9a6b7fda8fb715b36520309552a99d8b116c9bf94806c34dc0d5bce9f95a8
(6)   Message-Authenticator = 0x985a5fe5990b5612d2453d1203d1115c
(6)   Cisco-AVPair = "audit-session-id=0A4E01D7000007122D1A1862"
(6)   Cisco-AVPair = "method=dot1x"
(6)   NAS-IP-Address = 10.78.1.215
(6)   NAS-Port-Id = "GigabitEthernet1/0/10"
(6)   NAS-Port-Type = Ethernet
(6)   NAS-Port = 50110
(6)   State = 0xb96c70f8bc6b47a877ea72b373cfca2f
(6) Restoring &session-state
(6)   &session-state:Framed-MTU = 984
(6)   &session-state:FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(6)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3
Handshake, ClientHello"
(6)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHello"
(6)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Certificate"
(6)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerKeyExchange"
(6)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHelloDone"
(6)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2
Handshake, ClientKeyExchange"
(6)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2
Handshake, Finished"
(6)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
ChangeCipherSpec"
(6)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Finished"
(6)   &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"
(6)   &session-state:TLS-Session-Version = "TLS 1.2"
(6) # Executing section authorize from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(6)   authorize {
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = notfound
(6)     } # policy filter_username = notfound
(6)     [preprocess] = ok
(6)     [chap] = noop
(6)     [mschap] = noop
(6)     [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)     [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 7 length 80
(6) eap: Continuing tunnel setup
(6)     [eap] = ok
(6)   } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(6)   authenticate {
(6) eap: Removing EAP session with state 0xb96c70f8bc6b47a8
(6) eap: Previous EAP request found for state 0xb96c70f8bc6b47a8, released
from the list
(6) eap: Peer sent packet with method EAP TEAP (55)
(6) eap: Calling submodule eap_teap to process data
(6) eap_teap: Authenticate
(6) eap_teap: (TLS) EAP Done initial handshake
(6) eap_teap: Session established.  Proceeding to decode tunneled attributes
(6) eap_teap: Got Tunneled TEAP TLVs
(6) eap_teap:   FreeRADIUS-EAP-TEAP-Identity-Type = Machine
(6) eap_teap:   FreeRADIUS-EAP-TEAP-EAP-Payload =
0x0207002301686f73742f6d617274696e2d746573742d636f6d70757465722d63657274
(6) eap_teap: Processing received EAP Payload
(6) eap_teap: Got tunneled request
(6) eap_teap:   EAP-Message =
0x0207002301686f73742f6d617274696e2d746573742d636f6d70757465722d63657274
(6) eap_teap:   FreeRADIUS-EAP-TEAP-Identity-Type = Machine
(6) eap_teap: Got tunneled identity of host/martin-test-computer-cert
(6) eap_teap: AUTHENTICATION
(6) Virtual server inner-tunnel received request
(6)   EAP-Message =
0x0207002301686f73742f6d617274696e2d746573742d636f6d70757465722d63657274
(6)   FreeRADIUS-EAP-TEAP-Identity-Type = Machine
(6)   FreeRADIUS-Proxied-To = 127.0.0.1
(6)   User-Name = "host/martin-test-computer-cert"
(6) server inner-tunnel {
(6)   # Executing section authorize from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/inner-tunnel
(6)     authorize {
(6)       policy filter_username {
(6)         if (&User-Name) {
(6)         if (&User-Name)  -> TRUE
(6)         if (&User-Name)  {
(6)           if (&User-Name =~ / /) {
(6)           if (&User-Name =~ / /)  -> FALSE
(6)           if (&User-Name =~ /@[^@]*@/ ) {
(6)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)           if (&User-Name =~ /\.\./ ) {
(6)           if (&User-Name =~ /\.\./ )  -> FALSE
(6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(6)           if (&User-Name =~ /\.$/)  {
(6)           if (&User-Name =~ /\.$/)   -> FALSE
(6)           if (&User-Name =~ /@\./)  {
(6)           if (&User-Name =~ /@\./)   -> FALSE
(6)         } # if (&User-Name)  = notfound
(6)       } # policy filter_username = notfound
(6)       [chap] = noop
(6)       [mschap] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "host/martin-test-computer-cert", looking
up realm NULL
(6) suffix: No such realm "NULL"
(6)       [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 7 length 35
(6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(6)       [eap] = ok
(6)     } # authorize = ok
(6)   Found Auth-Type = eap
(6)   # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/inner-tunnel
(6)     authenticate {
(6) eap: Peer sent packet with method EAP Identity (1)
(6) eap: Calling submodule eap_teap to process data
(6) eap_teap: (TLS) TEAP -Initiating new session
(6) eap_teap: Setting &session-state:FreeRADIUS-EAP-TEAP-Identity-Type =
Machine
(6) eap: Sending EAP Request (code 1) ID 8 length 18
(6) eap: EAP session adding &reply:State = 0x7defb4fc7de7835d
(6)       [eap] = handled
(6)     } # authenticate = handled
(6)   Using Post-Auth-Type Challenge
(6)   Post-Auth-Type sub-section not found.  Ignoring.
(6)   # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/inner-tunnel
(6)   session-state: Saving cached attributes
(6)     Framed-MTU = 921
(6)     FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6)   EAP-Message = 0x010800123731000000080001000431323334
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0x7defb4fc7de7835db3aeb6a1b768d4cd
(6) eap_teap: Got tunneled Access-Challenge
(6) eap: Sending EAP Request (code 1) ID 8 length 57
(6) eap: EAP session adding &reply:State = 0xb96c70f8bf6447a8
(6)     [eap] = handled
(6)   } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(6)   Challenge { ... } # empty sub-section is ignored
(6) session-state: Saving cached attributes
(6)   Framed-MTU = 984
(6)   FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(6)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake,
ClientHello"
(6)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHello"
(6)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Certificate"
(6)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerKeyExchange"
(6)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHelloDone"
(6)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake,
ClientKeyExchange"
(6)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake,
Finished"
(6)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 ChangeCipherSpec"
(6)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Finished"
(6)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(6)   TLS-Session-Version = "TLS 1.2"
(6) Sent Access-Challenge Id 206 from 10.78.5.223:1645 to 10.78.1.215:1645
length 115
(6)   EAP-Message =
0x010800393701170303002eb50c72a1ebc221f7561e6ed34f1458aad6609202bf2ab763e3e5c829e26a45d8877ceb18b91825e99d2c530a6abf
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0xb96c70f8bf6447a877ea72b373cfca2f
(6) Finished request
Waking up in 0.6 seconds.
(7) Received Access-Request Id 207 from 10.78.1.215:1645 to 10.78.5.223:1645
length 303
(7)   User-Name = "anonymous"
(7)   Service-Type = Framed-User
(7)   Cisco-AVPair = "service-type=Framed"
(7)   Framed-MTU = 1500
(7)   Called-Station-Id = "00-3C-10-AB-A2-8A"
(7)   Calling-Station-Id = "C8-F7-50-08-DD-9F"
(7)   EAP-Message =
0x0208002d370117030300220000000000000002babbfa79ada0bd6752b7f8ff198c2460781aca737ee008be8ba8
(7)   Message-Authenticator = 0x8215b3b79228679feb0686d84b0946b0
(7)   Cisco-AVPair = "audit-session-id=0A4E01D7000007122D1A1862"
(7)   Cisco-AVPair = "method=dot1x"
(7)   NAS-IP-Address = 10.78.1.215
(7)   NAS-Port-Id = "GigabitEthernet1/0/10"
(7)   NAS-Port-Type = Ethernet
(7)   NAS-Port = 50110
(7)   State = 0xb96c70f8bf6447a877ea72b373cfca2f
(7) Restoring &session-state
(7)   &session-state:Framed-MTU = 984
(7)   &session-state:FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(7)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3
Handshake, ClientHello"
(7)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHello"
(7)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Certificate"
(7)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerKeyExchange"
(7)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHelloDone"
(7)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2
Handshake, ClientKeyExchange"
(7)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2
Handshake, Finished"
(7)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
ChangeCipherSpec"
(7)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Finished"
(7)   &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"
(7)   &session-state:TLS-Session-Version = "TLS 1.2"
(7) # Executing section authorize from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(7)   authorize {
(7)     policy filter_username {
(7)       if (&User-Name) {
(7)       if (&User-Name)  -> TRUE
(7)       if (&User-Name)  {
(7)         if (&User-Name =~ / /) {
(7)         if (&User-Name =~ / /)  -> FALSE
(7)         if (&User-Name =~ /@[^@]*@/ ) {
(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)         if (&User-Name =~ /\.\./ ) {
(7)         if (&User-Name =~ /\.\./ )  -> FALSE
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(7)         if (&User-Name =~ /\.$/)  {
(7)         if (&User-Name =~ /\.$/)   -> FALSE
(7)         if (&User-Name =~ /@\./)  {
(7)         if (&User-Name =~ /@\./)   -> FALSE
(7)       } # if (&User-Name)  = notfound
(7)     } # policy filter_username = notfound
(7)     [preprocess] = ok
(7)     [chap] = noop
(7)     [mschap] = noop
(7)     [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)     [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 8 length 45
(7) eap: Continuing tunnel setup
(7)     [eap] = ok
(7)   } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(7)   authenticate {
(7) eap: Removing EAP session with state 0xb96c70f8bf6447a8
(7) eap: Previous EAP request found for state 0xb96c70f8bf6447a8, released
from the list
(7) eap: Peer sent packet with method EAP TEAP (55)
(7) eap: Calling submodule eap_teap to process data
(7) eap_teap: Authenticate
(7) eap_teap: (TLS) EAP Done initial handshake
(7) eap_teap: Session established.  Proceeding to decode tunneled attributes
(7) eap_teap: Got Tunneled TEAP TLVs
(7) eap_teap:   FreeRADIUS-EAP-TEAP-EAP-Payload = 0x02080006030d
(7) eap_teap: Processing received EAP Payload
(7) eap_teap: Got tunneled request
(7) eap_teap:   EAP-Message = 0x02080006030d
(7) eap_teap: AUTHENTICATION
(7) Virtual server inner-tunnel received request
(7)   EAP-Message = 0x02080006030d
(7)   FreeRADIUS-Proxied-To = 127.0.0.1
(7)   User-Name = "host/martin-test-computer-cert"
(7)   State = 0x7defb4fc7de7835db3aeb6a1b768d4cd
(7) server inner-tunnel {
(7)   Restoring &session-state
(7)     &session-state:Framed-MTU = 921
(7)     &session-state:FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(7)   # Executing section authorize from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/inner-tunnel
(7)     authorize {
(7)       policy filter_username {
(7)         if (&User-Name) {
(7)         if (&User-Name)  -> TRUE
(7)         if (&User-Name)  {
(7)           if (&User-Name =~ / /) {
(7)           if (&User-Name =~ / /)  -> FALSE
(7)           if (&User-Name =~ /@[^@]*@/ ) {
(7)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)           if (&User-Name =~ /\.\./ ) {
(7)           if (&User-Name =~ /\.\./ )  -> FALSE
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(7)           if (&User-Name =~ /\.$/)  {
(7)           if (&User-Name =~ /\.$/)   -> FALSE
(7)           if (&User-Name =~ /@\./)  {
(7)           if (&User-Name =~ /@\./)   -> FALSE
(7)         } # if (&User-Name)  = notfound
(7)       } # policy filter_username = notfound
(7)       [chap] = noop
(7)       [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "host/martin-test-computer-cert", looking
up realm NULL
(7) suffix: No such realm "NULL"
(7)       [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 8 length 6
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7)       [eap] = updated
(7)       [files] = noop
(7)       [expiration] = noop
(7)       [logintime] = noop
Not doing PAP as Auth-Type is already set.
(7)       [pap] = noop
(7)     } # authorize = updated
(7)   Found Auth-Type = eap
(7)   # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/inner-tunnel
(7)     authenticate {
(7) eap: Removing EAP session with state 0x7defb4fc7de7835d
(7) eap: Previous EAP request found for state 0x7defb4fc7de7835d, released
from the list
(7) eap: Peer sent packet with method EAP NAK (3)
(7) eap: Found mutually acceptable type TLS (13)
(7) eap: Calling submodule eap_tls to process data
(7) eap_tls: (TLS) TLS -Initiating new session
(7) eap_tls: (TLS) TLS - Setting verify mode to require certificate from
client
(7) eap: Sending EAP Request (code 1) ID 9 length 6
(7) eap: EAP session adding &reply:State = 0x7defb4fc7ce6b95d
(7)       [eap] = handled
(7)     } # authenticate = handled
(7)   Using Post-Auth-Type Challenge
(7)   Post-Auth-Type sub-section not found.  Ignoring.
(7)   # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/inner-tunnel
(7)   session-state: Saving cached attributes
(7)     Framed-MTU = 921
(7)     FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7)   EAP-Message = 0x010900060d20
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0x7defb4fc7ce6b95db3aeb6a1b768d4cd
(7) eap_teap: Got tunneled Access-Challenge
(7) eap: Sending EAP Request (code 1) ID 9 length 45
(7) eap: EAP session adding &reply:State = 0xb96c70f8be6547a8
(7)     [eap] = handled
(7)   } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(7)   Challenge { ... } # empty sub-section is ignored
(7) session-state: Saving cached attributes
(7)   Framed-MTU = 984
(7)   FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(7)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake,
ClientHello"
(7)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHello"
(7)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Certificate"
(7)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerKeyExchange"
(7)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHelloDone"
(7)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake,
ClientKeyExchange"
(7)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake,
Finished"
(7)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 ChangeCipherSpec"
(7)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Finished"
(7)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(7)   TLS-Session-Version = "TLS 1.2"
(7) Sent Access-Challenge Id 207 from 10.78.5.223:1645 to 10.78.1.215:1645
length 103
(7)   EAP-Message =
0x0109002d37011703030022b50c72a1ebc221f868f3f6be971058b2e881175d1ad8e72d6454294b68863d89c959
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0xb96c70f8be6547a877ea72b373cfca2f
(7) Finished request
Waking up in 0.4 seconds.
(0) Cleaning up request packet ID 200 with timestamp +6 due to
cleanup_delay was reached
(1) Cleaning up request packet ID 201 with timestamp +6 due to
cleanup_delay was reached
(2) Cleaning up request packet ID 202 with timestamp +6 due to
cleanup_delay was reached
Waking up in 1.4 seconds.
(8) Received Access-Request Id 208 from 10.78.1.215:1645 to 10.78.5.223:1645
length 566
(8)   User-Name = "anonymous"
(8)   Service-Type = Framed-User
(8)   Cisco-AVPair = "service-type=Framed"
(8)   Framed-MTU = 1500
(8)   Called-Station-Id = "00-3C-10-AB-A2-8A"
(8)   Calling-Station-Id = "C8-F7-50-08-DD-9F"
(8)   EAP-Message =
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
(8)   Message-Authenticator = 0xa653d91bce8a0d17ecf645d694adc314
(8)   Cisco-AVPair = "audit-session-id=0A4E01D7000007122D1A1862"
(8)   Cisco-AVPair = "method=dot1x"
(8)   NAS-IP-Address = 10.78.1.215
(8)   NAS-Port-Id = "GigabitEthernet1/0/10"
(8)   NAS-Port-Type = Ethernet
(8)   NAS-Port = 50110
(8)   State = 0xb96c70f8be6547a877ea72b373cfca2f
(8) Restoring &session-state
(8)   &session-state:Framed-MTU = 984
(8)   &session-state:FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(8)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3
Handshake, ClientHello"
(8)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHello"
(8)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Certificate"
(8)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerKeyExchange"
(8)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHelloDone"
(8)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2
Handshake, ClientKeyExchange"
(8)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2
Handshake, Finished"
(8)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
ChangeCipherSpec"
(8)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Finished"
(8)   &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"
(8)   &session-state:TLS-Session-Version = "TLS 1.2"
(8) # Executing section authorize from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(8)   authorize {
(8)     policy filter_username {
(8)       if (&User-Name) {
(8)       if (&User-Name)  -> TRUE
(8)       if (&User-Name)  {
(8)         if (&User-Name =~ / /) {
(8)         if (&User-Name =~ / /)  -> FALSE
(8)         if (&User-Name =~ /@[^@]*@/ ) {
(8)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)         if (&User-Name =~ /\.\./ ) {
(8)         if (&User-Name =~ /\.\./ )  -> FALSE
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(8)         if (&User-Name =~ /\.$/)  {
(8)         if (&User-Name =~ /\.$/)   -> FALSE
(8)         if (&User-Name =~ /@\./)  {
(8)         if (&User-Name =~ /@\./)   -> FALSE
(8)       } # if (&User-Name)  = notfound
(8)     } # policy filter_username = notfound
(8)     [preprocess] = ok
(8)     [chap] = noop
(8)     [mschap] = noop
(8)     [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(8) suffix: No such realm "NULL"
(8)     [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 9 length 306
(8) eap: Continuing tunnel setup
(8)     [eap] = ok
(8)   } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(8)   authenticate {
(8) eap: Removing EAP session with state 0xb96c70f8be6547a8
(8) eap: Previous EAP request found for state 0xb96c70f8be6547a8, released
from the list
(8) eap: Peer sent packet with method EAP TEAP (55)
(8) eap: Calling submodule eap_teap to process data
(8) eap_teap: Authenticate
(8) eap_teap: (TLS) EAP Done initial handshake
(8) eap_teap: Session established.  Proceeding to decode tunneled attributes
(8) eap_teap: Got Tunneled TEAP TLVs
(8) eap_teap:   FreeRADIUS-EAP-TEAP-EAP-Payload =
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
(8) eap_teap: Processing received EAP Payload
(8) eap_teap: Got tunneled request
(8) eap_teap:   EAP-Message =
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
(8) eap_teap: AUTHENTICATION
(8) Virtual server inner-tunnel received request
(8)   EAP-Message =
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
(8)   FreeRADIUS-Proxied-To = 127.0.0.1
(8)   User-Name = "host/martin-test-computer-cert"
(8)   State = 0x7defb4fc7ce6b95db3aeb6a1b768d4cd
(8) server inner-tunnel {
(8)   Restoring &session-state
(8)     &session-state:Framed-MTU = 921
(8)     &session-state:FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(8)   # Executing section authorize from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/inner-tunnel
(8)     authorize {
(8)       policy filter_username {
(8)         if (&User-Name) {
(8)         if (&User-Name)  -> TRUE
(8)         if (&User-Name)  {
(8)           if (&User-Name =~ / /) {
(8)           if (&User-Name =~ / /)  -> FALSE
(8)           if (&User-Name =~ /@[^@]*@/ ) {
(8)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)           if (&User-Name =~ /\.\./ ) {
(8)           if (&User-Name =~ /\.\./ )  -> FALSE
(8)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(8)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(8)           if (&User-Name =~ /\.$/)  {
(8)           if (&User-Name =~ /\.$/)   -> FALSE
(8)           if (&User-Name =~ /@\./)  {
(8)           if (&User-Name =~ /@\./)   -> FALSE
(8)         } # if (&User-Name)  = notfound
(8)       } # policy filter_username = notfound
(8)       [chap] = noop
(8)       [mschap] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "host/martin-test-computer-cert", looking
up realm NULL
(8) suffix: No such realm "NULL"
(8)       [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 9 length 267
(8) eap: No EAP Start, assuming it's an on-going EAP conversation
(8)       [eap] = updated
(8)       [files] = noop
(8)       [expiration] = noop
(8)       [logintime] = noop
(8)       [pap] = noop
(8)     } # authorize = updated
(8)   Found Auth-Type = eap
(8)   # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/inner-tunnel
(8)     authenticate {
(8) eap: Removing EAP session with state 0x7defb4fc7ce6b95d
(8) eap: Previous EAP request found for state 0x7defb4fc7ce6b95d, released
from the list
(8) eap: Peer sent packet with method EAP TLS (13)
(8) eap: Calling submodule eap_tls to process data
(8) eap_tls: (TLS) EAP Peer says that the final record size will be 257
bytes
(8) eap_tls: (TLS) EAP Got all data (257 bytes)
(8) eap_tls: (TLS) TLS - Handshake state - before SSL initialization
(8) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization
(8) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization
(8) eap_tls: (TLS) TLS - recv TLS 1.3 Handshake, ClientHello
(8) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read client
hello
(8) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, ServerHello
(8) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write server
hello
(8) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, Certificate
(8) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write
certificate
(8) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, ServerKeyExchange
(8) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write key
exchange
(8) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, CertificateRequest
(8) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write
certificate request
(8) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, ServerHelloDone
(8) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write server
done
(8) eap_tls: (TLS) TLS - Server : Need to read more data: SSLv3/TLS write
server done
(8) eap_tls: (TLS) TLS - In Handshake Phase
(8) eap: Sending EAP Request (code 1) ID 10 length 927
(8) eap: EAP session adding &reply:State = 0x7defb4fc7fe5b95d
(8)       [eap] = handled
(8)     } # authenticate = handled
(8)   Using Post-Auth-Type Challenge
(8)   Post-Auth-Type sub-section not found.  Ignoring.
(8)   # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/inner-tunnel
(8)   session-state: Saving cached attributes
(8)     Framed-MTU = 921
(8)     FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(8)     TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(8)     TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHello"
(8)     TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
Certificate"
(8)     TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerKeyExchange"
(8)     TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
CertificateRequest"
(8)     TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHelloDone"
(8) } # server inner-tunnel
(8) Virtual server sending reply
(8)   EAP-Message =
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
(8)   Message-Authenticator = 0x00000000000000000000000000000000
(8)   State = 0x7defb4fc7fe5b95db3aeb6a1b768d4cd
(8) eap_teap: Got tunneled Access-Challenge
(8) eap: Sending EAP Request (code 1) ID 10 length 966
(8) eap: EAP session adding &reply:State = 0xb96c70f8b16647a8
(8)     [eap] = handled
(8)   } # authenticate = handled
(8) Using Post-Auth-Type Challenge
(8) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(8)   Challenge { ... } # empty sub-section is ignored
(8) session-state: Saving cached attributes
(8)   Framed-MTU = 984
(8)   FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(8)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake,
ClientHello"
(8)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHello"
(8)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Certificate"
(8)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerKeyExchange"
(8)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHelloDone"
(8)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake,
ClientKeyExchange"
(8)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake,
Finished"
(8)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 ChangeCipherSpec"
(8)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Finished"
(8)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(8)   TLS-Session-Version = "TLS 1.2"
(8) Sent Access-Challenge Id 208 from 10.78.5.223:1645 to 10.78.1.215:1645
length 1030
(8)   EAP-Message =
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
(8)   Message-Authenticator = 0x00000000000000000000000000000000
(8)   State = 0xb96c70f8b16647a877ea72b373cfca2f
(8) Finished request
Waking up in 0.4 seconds.
(3) Cleaning up request packet ID 203 with timestamp +8 due to
cleanup_delay was reached
Waking up in 0.2 seconds.
(4) Cleaning up request packet ID 204 with timestamp +8 due to
cleanup_delay was reached
Waking up in 1.2 seconds.
(9) Received Access-Request Id 209 from 10.78.1.215:1645 to 10.78.5.223:1645
length 303
(9)   User-Name = "anonymous"
(9)   Service-Type = Framed-User
(9)   Cisco-AVPair = "service-type=Framed"
(9)   Framed-MTU = 1500
(9)   Called-Station-Id = "00-3C-10-AB-A2-8A"
(9)   Calling-Station-Id = "C8-F7-50-08-DD-9F"
(9)   EAP-Message =
0x020a002d3701170303002200000000000000041def86fda90d8a3e41d2ff4096aa2a2e1290f7072fbd32122e5a
(9)   Message-Authenticator = 0x91c65f5a3c373a3d88f49d8a3ed40e67
(9)   Cisco-AVPair = "audit-session-id=0A4E01D7000007122D1A1862"
(9)   Cisco-AVPair = "method=dot1x"
(9)   NAS-IP-Address = 10.78.1.215
(9)   NAS-Port-Id = "GigabitEthernet1/0/10"
(9)   NAS-Port-Type = Ethernet
(9)   NAS-Port = 50110
(9)   State = 0xb96c70f8b16647a877ea72b373cfca2f
(9) Restoring &session-state
(9)   &session-state:Framed-MTU = 984
(9)   &session-state:FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(9)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3
Handshake, ClientHello"
(9)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHello"
(9)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Certificate"
(9)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerKeyExchange"
(9)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHelloDone"
(9)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2
Handshake, ClientKeyExchange"
(9)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2
Handshake, Finished"
(9)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
ChangeCipherSpec"
(9)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Finished"
(9)   &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"
(9)   &session-state:TLS-Session-Version = "TLS 1.2"
(9) # Executing section authorize from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(9)   authorize {
(9)     policy filter_username {
(9)       if (&User-Name) {
(9)       if (&User-Name)  -> TRUE
(9)       if (&User-Name)  {
(9)         if (&User-Name =~ / /) {
(9)         if (&User-Name =~ / /)  -> FALSE
(9)         if (&User-Name =~ /@[^@]*@/ ) {
(9)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(9)         if (&User-Name =~ /\.\./ ) {
(9)         if (&User-Name =~ /\.\./ )  -> FALSE
(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(9)         if (&User-Name =~ /\.$/)  {
(9)         if (&User-Name =~ /\.$/)   -> FALSE
(9)         if (&User-Name =~ /@\./)  {
(9)         if (&User-Name =~ /@\./)   -> FALSE
(9)       } # if (&User-Name)  = notfound
(9)     } # policy filter_username = notfound
(9)     [preprocess] = ok
(9)     [chap] = noop
(9)     [mschap] = noop
(9)     [digest] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(9) suffix: No such realm "NULL"
(9)     [suffix] = noop
(9) eap: Peer sent EAP Response (code 2) ID 10 length 45
(9) eap: Continuing tunnel setup
(9)     [eap] = ok
(9)   } # authorize = ok
(9) Found Auth-Type = eap
(9) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(9)   authenticate {
(9) eap: Removing EAP session with state 0xb96c70f8b16647a8
(9) eap: Previous EAP request found for state 0xb96c70f8b16647a8, released
from the list
(9) eap: Peer sent packet with method EAP TEAP (55)
(9) eap: Calling submodule eap_teap to process data
(9) eap_teap: Authenticate
(9) eap_teap: (TLS) EAP Done initial handshake
(9) eap_teap: Session established.  Proceeding to decode tunneled attributes
(9) eap_teap: Got Tunneled TEAP TLVs
(9) eap_teap:   FreeRADIUS-EAP-TEAP-EAP-Payload = 0x020a00060d00
(9) eap_teap: Processing received EAP Payload
(9) eap_teap: Got tunneled request
(9) eap_teap:   EAP-Message = 0x020a00060d00
(9) eap_teap: AUTHENTICATION
(9) Virtual server inner-tunnel received request
(9)   EAP-Message = 0x020a00060d00
(9)   FreeRADIUS-Proxied-To = 127.0.0.1
(9)   User-Name = "host/martin-test-computer-cert"
(9)   State = 0x7defb4fc7fe5b95db3aeb6a1b768d4cd
(9) server inner-tunnel {
(9)   Restoring &session-state
(9)     &session-state:Framed-MTU = 921
(9)     &session-state:FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(9)     &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3
Handshake, ClientHello"
(9)     &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerHello"
(9)     &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, Certificate"
(9)     &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerKeyExchange"
(9)     &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, CertificateRequest"
(9)     &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerHelloDone"
(9)   # Executing section authorize from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/inner-tunnel
(9)     authorize {
(9)       policy filter_username {
(9)         if (&User-Name) {
(9)         if (&User-Name)  -> TRUE
(9)         if (&User-Name)  {
(9)           if (&User-Name =~ / /) {
(9)           if (&User-Name =~ / /)  -> FALSE
(9)           if (&User-Name =~ /@[^@]*@/ ) {
(9)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(9)           if (&User-Name =~ /\.\./ ) {
(9)           if (&User-Name =~ /\.\./ )  -> FALSE
(9)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(9)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(9)           if (&User-Name =~ /\.$/)  {
(9)           if (&User-Name =~ /\.$/)   -> FALSE
(9)           if (&User-Name =~ /@\./)  {
(9)           if (&User-Name =~ /@\./)   -> FALSE
(9)         } # if (&User-Name)  = notfound
(9)       } # policy filter_username = notfound
(9)       [chap] = noop
(9)       [mschap] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "host/martin-test-computer-cert", looking
up realm NULL
(9) suffix: No such realm "NULL"
(9)       [suffix] = noop
(9) eap: Peer sent EAP Response (code 2) ID 10 length 6
(9) eap: No EAP Start, assuming it's an on-going EAP conversation
(9)       [eap] = updated
(9)       [files] = noop
(9)       [expiration] = noop
(9)       [logintime] = noop
(9)       [pap] = noop
(9)     } # authorize = updated
(9)   Found Auth-Type = eap
(9)   # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/inner-tunnel
(9)     authenticate {
(9) eap: Removing EAP session with state 0x7defb4fc7fe5b95d
(9) eap: Previous EAP request found for state 0x7defb4fc7fe5b95d, released
from the list
(9) eap: Peer sent packet with method EAP TLS (13)
(9) eap: Calling submodule eap_tls to process data
(9) eap_tls: (TLS) Peer ACKed our handshake fragment
(9) eap: Sending EAP Request (code 1) ID 11 length 927
(9) eap: EAP session adding &reply:State = 0x7defb4fc7ee4b95d
(9)       [eap] = handled
(9)     } # authenticate = handled
(9)   Using Post-Auth-Type Challenge
(9)   Post-Auth-Type sub-section not found.  Ignoring.
(9)   # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/inner-tunnel
(9)   session-state: Saving cached attributes
(9)     Framed-MTU = 921
(9)     FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(9)     TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(9)     TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHello"
(9)     TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
Certificate"
(9)     TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerKeyExchange"
(9)     TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
CertificateRequest"
(9)     TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHelloDone"
(9) } # server inner-tunnel
(9) Virtual server sending reply
(9)   EAP-Message =
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
(9)   Message-Authenticator = 0x00000000000000000000000000000000
(9)   State = 0x7defb4fc7ee4b95db3aeb6a1b768d4cd
(9) eap_teap: Got tunneled Access-Challenge
(9) eap: Sending EAP Request (code 1) ID 11 length 966
(9) eap: EAP session adding &reply:State = 0xb96c70f8b06747a8
(9)     [eap] = handled
(9)   } # authenticate = handled
(9) Using Post-Auth-Type Challenge
(9) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(9)   Challenge { ... } # empty sub-section is ignored
(9) session-state: Saving cached attributes
(9)   Framed-MTU = 984
(9)   FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(9)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake,
ClientHello"
(9)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHello"
(9)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Certificate"
(9)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerKeyExchange"
(9)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHelloDone"
(9)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake,
ClientKeyExchange"
(9)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake,
Finished"
(9)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 ChangeCipherSpec"
(9)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Finished"
(9)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(9)   TLS-Session-Version = "TLS 1.2"
(9) Sent Access-Challenge Id 209 from 10.78.5.223:1645 to 10.78.1.215:1645
length 1030
(9)   EAP-Message =
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
(9)   Message-Authenticator = 0x00000000000000000000000000000000
(9)   State = 0xb96c70f8b06747a877ea72b373cfca2f
(9) Finished request
Waking up in 0.3 seconds.
(5) Cleaning up request packet ID 205 with timestamp +9 due to
cleanup_delay was reached
Waking up in 1.3 seconds.
(10) Received Access-Request Id 210 from 10.78.1.215:1645 to
10.78.5.223:1645 length 303
(10)   User-Name = "anonymous"
(10)   Service-Type = Framed-User
(10)   Cisco-AVPair = "service-type=Framed"
(10)   Framed-MTU = 1500
(10)   Called-Station-Id = "00-3C-10-AB-A2-8A"
(10)   Calling-Station-Id = "C8-F7-50-08-DD-9F"
(10)   EAP-Message =
0x020b002d370117030300220000000000000005504e3f837c1a2937e2c33cf7ecd3343d9fac79bc6715a8bf447e
(10)   Message-Authenticator = 0x44bae8eb31b0ca015ea791fbbe9eba13
(10)   Cisco-AVPair = "audit-session-id=0A4E01D7000007122D1A1862"
(10)   Cisco-AVPair = "method=dot1x"
(10)   NAS-IP-Address = 10.78.1.215
(10)   NAS-Port-Id = "GigabitEthernet1/0/10"
(10)   NAS-Port-Type = Ethernet
(10)   NAS-Port = 50110
(10)   State = 0xb96c70f8b06747a877ea72b373cfca2f
(10) Restoring &session-state
(10)   &session-state:Framed-MTU = 984
(10)   &session-state:FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(10)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3
Handshake, ClientHello"
(10)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHello"
(10)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Certificate"
(10)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerKeyExchange"
(10)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHelloDone"
(10)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2
Handshake, ClientKeyExchange"
(10)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2
Handshake, Finished"
(10)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
ChangeCipherSpec"
(10)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Finished"
(10)   &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"
(10)   &session-state:TLS-Session-Version = "TLS 1.2"
(10) # Executing section authorize from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(10)   authorize {
(10)     policy filter_username {
(10)       if (&User-Name) {
(10)       if (&User-Name)  -> TRUE
(10)       if (&User-Name)  {
(10)         if (&User-Name =~ / /) {
(10)         if (&User-Name =~ / /)  -> FALSE
(10)         if (&User-Name =~ /@[^@]*@/ ) {
(10)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(10)         if (&User-Name =~ /\.\./ ) {
(10)         if (&User-Name =~ /\.\./ )  -> FALSE
(10)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(10)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(10)         if (&User-Name =~ /\.$/)  {
(10)         if (&User-Name =~ /\.$/)   -> FALSE
(10)         if (&User-Name =~ /@\./)  {
(10)         if (&User-Name =~ /@\./)   -> FALSE
(10)       } # if (&User-Name)  = notfound
(10)     } # policy filter_username = notfound
(10)     [preprocess] = ok
(10)     [chap] = noop
(10)     [mschap] = noop
(10)     [digest] = noop
(10) suffix: Checking for suffix after "@"
(10) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(10) suffix: No such realm "NULL"
(10)     [suffix] = noop
(10) eap: Peer sent EAP Response (code 2) ID 11 length 45
(10) eap: Continuing tunnel setup
(10)     [eap] = ok
(10)   } # authorize = ok
(10) Found Auth-Type = eap
(10) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(10)   authenticate {
(10) eap: Removing EAP session with state 0xb96c70f8b06747a8
(10) eap: Previous EAP request found for state 0xb96c70f8b06747a8, released
from the list
(10) eap: Peer sent packet with method EAP TEAP (55)
(10) eap: Calling submodule eap_teap to process data
(10) eap_teap: Authenticate
(10) eap_teap: (TLS) EAP Done initial handshake
(10) eap_teap: Session established.  Proceeding to decode tunneled
attributes
(10) eap_teap: Got Tunneled TEAP TLVs
(10) eap_teap:   FreeRADIUS-EAP-TEAP-EAP-Payload = 0x020b00060d00
(10) eap_teap: Processing received EAP Payload
(10) eap_teap: Got tunneled request
(10) eap_teap:   EAP-Message = 0x020b00060d00
(10) eap_teap: AUTHENTICATION
(10) Virtual server inner-tunnel received request
(10)   EAP-Message = 0x020b00060d00
(10)   FreeRADIUS-Proxied-To = 127.0.0.1
(10)   User-Name = "host/martin-test-computer-cert"
(10)   State = 0x7defb4fc7ee4b95db3aeb6a1b768d4cd
(10) server inner-tunnel {
(10)   Restoring &session-state
(10)     &session-state:Framed-MTU = 921
(10)     &session-state:FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(10)     &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3
Handshake, ClientHello"
(10)     &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerHello"
(10)     &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, Certificate"
(10)     &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerKeyExchange"
(10)     &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, CertificateRequest"
(10)     &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerHelloDone"
(10)   # Executing section authorize from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/inner-tunnel
(10)     authorize {
(10)       policy filter_username {
(10)         if (&User-Name) {
(10)         if (&User-Name)  -> TRUE
(10)         if (&User-Name)  {
(10)           if (&User-Name =~ / /) {
(10)           if (&User-Name =~ / /)  -> FALSE
(10)           if (&User-Name =~ /@[^@]*@/ ) {
(10)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(10)           if (&User-Name =~ /\.\./ ) {
(10)           if (&User-Name =~ /\.\./ )  -> FALSE
(10)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(10)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(10)           if (&User-Name =~ /\.$/)  {
(10)           if (&User-Name =~ /\.$/)   -> FALSE
(10)           if (&User-Name =~ /@\./)  {
(10)           if (&User-Name =~ /@\./)   -> FALSE
(10)         } # if (&User-Name)  = notfound
(10)       } # policy filter_username = notfound
(10)       [chap] = noop
(10)       [mschap] = noop
(10) suffix: Checking for suffix after "@"
(10) suffix: No '@' in User-Name = "host/martin-test-computer-cert",
looking up realm NULL
(10) suffix: No such realm "NULL"
(10)       [suffix] = noop
(10) eap: Peer sent EAP Response (code 2) ID 11 length 6
(10) eap: No EAP Start, assuming it's an on-going EAP conversation
(10)       [eap] = updated
(10)       [files] = noop
(10)       [expiration] = noop
(10)       [logintime] = noop
(10)       [pap] = noop
(10)     } # authorize = updated
(10)   Found Auth-Type = eap
(10)   # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/inner-tunnel
(10)     authenticate {
(10) eap: Removing EAP session with state 0x7defb4fc7ee4b95d
(10) eap: Previous EAP request found for state 0x7defb4fc7ee4b95d, released
from the list
(10) eap: Peer sent packet with method EAP TLS (13)
(10) eap: Calling submodule eap_tls to process data
(10) eap_tls: (TLS) Peer ACKed our handshake fragment
(10) eap: Sending EAP Request (code 1) ID 12 length 757
(10) eap: EAP session adding &reply:State = 0x7defb4fc79e3b95d
(10)       [eap] = handled
(10)     } # authenticate = handled
(10)   Using Post-Auth-Type Challenge
(10)   Post-Auth-Type sub-section not found.  Ignoring.
(10)   # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/inner-tunnel
(10)   session-state: Saving cached attributes
(10)     Framed-MTU = 921
(10)     FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(10)     TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(10)     TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHello"
(10)     TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
Certificate"
(10)     TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerKeyExchange"
(10)     TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
CertificateRequest"
(10)     TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHelloDone"
(10) } # server inner-tunnel
(10) Virtual server sending reply
(10)   EAP-Message =
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
(10)   Message-Authenticator = 0x00000000000000000000000000000000
(10)   State = 0x7defb4fc79e3b95db3aeb6a1b768d4cd
(10) eap_teap: Got tunneled Access-Challenge
(10) eap: Sending EAP Request (code 1) ID 12 length 796
(10) eap: EAP session adding &reply:State = 0xb96c70f8b36047a8
(10)     [eap] = handled
(10)   } # authenticate = handled
(10) Using Post-Auth-Type Challenge
(10) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(10)   Challenge { ... } # empty sub-section is ignored
(10) session-state: Saving cached attributes
(10)   Framed-MTU = 984
(10)   FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(10)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake,
ClientHello"
(10)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHello"
(10)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Certificate"
(10)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerKeyExchange"
(10)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHelloDone"
(10)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake,
ClientKeyExchange"
(10)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake,
Finished"
(10)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
ChangeCipherSpec"
(10)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Finished"
(10)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(10)   TLS-Session-Version = "TLS 1.2"
(10) Sent Access-Challenge Id 210 from 10.78.5.223:1645 to 10.78.1.215:1645
length 860
(10)   EAP-Message =
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
(10)   Message-Authenticator = 0x00000000000000000000000000000000
(10)   State = 0xb96c70f8b36047a877ea72b373cfca2f
(10) Finished request
Waking up in 0.2 seconds.
(6) Cleaning up request packet ID 206 with timestamp +11 due to
cleanup_delay was reached
Waking up in 0.1 seconds.
(7) Cleaning up request packet ID 207 with timestamp +11 due to
cleanup_delay was reached
Waking up in 1.5 seconds.
(11) Received Access-Request Id 211 from 10.78.1.215:1645 to
10.78.5.223:1645 length 1565
(11)   User-Name = "anonymous"
(11)   Service-Type = Framed-User
(11)   Cisco-AVPair = "service-type=Framed"
(11)   Framed-MTU = 1500
(11)   Called-Station-Id = "00-3C-10-AB-A2-8A"
(11)   Calling-Station-Id = "C8-F7-50-08-DD-9F"
(11)   EAP-Message =
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
(11)   Message-Authenticator = 0xf42d9c5aac48f331fc9de8a9799f3325
(11)   Cisco-AVPair = "audit-session-id=0A4E01D7000007122D1A1862"
(11)   Cisco-AVPair = "method=dot1x"
(11)   NAS-IP-Address = 10.78.1.215
(11)   NAS-Port-Id = "GigabitEthernet1/0/10"
(11)   NAS-Port-Type = Ethernet
(11)   NAS-Port = 50110
(11)   State = 0xb96c70f8b36047a877ea72b373cfca2f
(11) Restoring &session-state
(11)   &session-state:Framed-MTU = 984
(11)   &session-state:FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(11)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3
Handshake, ClientHello"
(11)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHello"
(11)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Certificate"
(11)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerKeyExchange"
(11)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHelloDone"
(11)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2
Handshake, ClientKeyExchange"
(11)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2
Handshake, Finished"
(11)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
ChangeCipherSpec"
(11)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Finished"
(11)   &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"
(11)   &session-state:TLS-Session-Version = "TLS 1.2"
(11) # Executing section authorize from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(11)   authorize {
(11)     policy filter_username {
(11)       if (&User-Name) {
(11)       if (&User-Name)  -> TRUE
(11)       if (&User-Name)  {
(11)         if (&User-Name =~ / /) {
(11)         if (&User-Name =~ / /)  -> FALSE
(11)         if (&User-Name =~ /@[^@]*@/ ) {
(11)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(11)         if (&User-Name =~ /\.\./ ) {
(11)         if (&User-Name =~ /\.\./ )  -> FALSE
(11)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(11)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(11)         if (&User-Name =~ /\.$/)  {
(11)         if (&User-Name =~ /\.$/)   -> FALSE
(11)         if (&User-Name =~ /@\./)  {
(11)         if (&User-Name =~ /@\./)   -> FALSE
(11)       } # if (&User-Name)  = notfound
(11)     } # policy filter_username = notfound
(11)     [preprocess] = ok
(11)     [chap] = noop
(11)     [mschap] = noop
(11)     [digest] = noop
(11) suffix: Checking for suffix after "@"
(11) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(11) suffix: No such realm "NULL"
(11)     [suffix] = noop
(11) eap: Peer sent EAP Response (code 2) ID 12 length 1297
(11) eap: Continuing tunnel setup
(11)     [eap] = ok
(11)   } # authorize = ok
(11) Found Auth-Type = eap
(11) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(11)   authenticate {
(11) eap: Removing EAP session with state 0xb96c70f8b36047a8
(11) eap: Previous EAP request found for state 0xb96c70f8b36047a8, released
from the list
(11) eap: Peer sent packet with method EAP TEAP (55)
(11) eap: Calling submodule eap_teap to process data
(11) eap_teap: Authenticate
(11) eap_teap: (TLS) EAP Done initial handshake
(11) eap_teap: Session established.  Proceeding to decode tunneled
attributes
(11) eap_teap: Got Tunneled TEAP TLVs
(11) eap_teap:   FreeRADIUS-EAP-TEAP-EAP-Payload =
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
(11) eap_teap: Processing received EAP Payload
(11) eap_teap: Got tunneled request
(11) eap_teap:   EAP-Message =
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
(11) eap_teap: AUTHENTICATION
(11) Virtual server inner-tunnel received request
(11)   EAP-Message =
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
(11)   FreeRADIUS-Proxied-To = 127.0.0.1
(11)   User-Name = "host/martin-test-computer-cert"
(11)   State = 0x7defb4fc79e3b95db3aeb6a1b768d4cd
(11) server inner-tunnel {
(11)   Restoring &session-state
(11)     &session-state:Framed-MTU = 921
(11)     &session-state:FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(11)     &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3
Handshake, ClientHello"
(11)     &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerHello"
(11)     &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, Certificate"
(11)     &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerKeyExchange"
(11)     &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, CertificateRequest"
(11)     &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerHelloDone"
(11)   # Executing section authorize from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/inner-tunnel
(11)     authorize {
(11)       policy filter_username {
(11)         if (&User-Name) {
(11)         if (&User-Name)  -> TRUE
(11)         if (&User-Name)  {
(11)           if (&User-Name =~ / /) {
(11)           if (&User-Name =~ / /)  -> FALSE
(11)           if (&User-Name =~ /@[^@]*@/ ) {
(11)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(11)           if (&User-Name =~ /\.\./ ) {
(11)           if (&User-Name =~ /\.\./ )  -> FALSE
(11)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(11)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(11)           if (&User-Name =~ /\.$/)  {
(11)           if (&User-Name =~ /\.$/)   -> FALSE
(11)           if (&User-Name =~ /@\./)  {
(11)           if (&User-Name =~ /@\./)   -> FALSE
(11)         } # if (&User-Name)  = notfound
(11)       } # policy filter_username = notfound
(11)       [chap] = noop
(11)       [mschap] = noop
(11) suffix: Checking for suffix after "@"
(11) suffix: No '@' in User-Name = "host/martin-test-computer-cert",
looking up realm NULL
(11) suffix: No such realm "NULL"
(11)       [suffix] = noop
(11) eap: Peer sent EAP Response (code 2) ID 12 length 1258
(11) eap: No EAP Start, assuming it's an on-going EAP conversation
(11)       [eap] = updated
(11)       [files] = noop
(11)       [expiration] = noop
(11)       [logintime] = noop
(11)       [pap] = noop
(11)     } # authorize = updated
(11)   Found Auth-Type = eap
(11)   # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/inner-tunnel
(11)     authenticate {
(11) eap: Removing EAP session with state 0x7defb4fc79e3b95d
(11) eap: Previous EAP request found for state 0x7defb4fc79e3b95d, released
from the list
(11) eap: Peer sent packet with method EAP TLS (13)
(11) eap: Calling submodule eap_tls to process data
(11) eap_tls: (TLS) EAP Peer says that the final record size will be 1248
bytes
(11) eap_tls: (TLS) EAP Got all data (1248 bytes)
(11) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write server
done
(11) eap_tls: (TLS) TLS - recv TLS 1.2 Handshake, Certificate
(11) eap_tls: (TLS) TLS - Creating attributes from 2 certificate in chain
(11) eap_tls:   TLS-Cert-Serial :=
"6837d2898be29a5a56edbd7008ad02b855b72ecc"
(11) eap_tls:   TLS-Cert-Expiration := "341119130951Z"
(11) eap_tls:   TLS-Cert-Valid-Since := "241121130951Z"
(11) eap_tls:   TLS-Cert-Subject :=
"/C=DE/L=Bochum/O=Test/CN=martin-test-ca"
(11) eap_tls:   TLS-Cert-Issuer := "/C=DE/L=Bochum/O=Test/CN=martin-test-ca"
(11) eap_tls:   TLS-Cert-Common-Name := "martin-test-ca"
(11) eap_tls: (TLS) TLS - Creating attributes from 1 certificate in chain
(11) eap_tls:   TLS-Client-Cert-Serial := "03"
(11) eap_tls:   TLS-Client-Cert-Expiration := "341127080353Z"
(11) eap_tls:   TLS-Client-Cert-Valid-Since := "241129080353Z"
(11) eap_tls:   TLS-Client-Cert-Subject :=
"/C=DE/L=Bochum/O=Test/CN=martin-test-computer-cert"
(11) eap_tls:   TLS-Client-Cert-Issuer :=
"/C=DE/L=Bochum/O=Test/CN=martin-test-ca"
(11) eap_tls:   TLS-Client-Cert-Common-Name := "martin-test-computer-cert"
(11) eap_tls:   TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS Web
Client Authentication"
(11) eap_tls:   TLS-Client-Cert-X509v3-Extended-Key-Usage-OID +=
"1.3.6.1.5.5.7.3.2"
Certificate chain - 1 intermediate CA cert(s) untrusted
To forbid these certificates see 'reject_unknown_intermediate_ca'
(TLS) untrusted certificate with depth [0] subject name
/C=DE/L=Bochum/O=Test/CN=martin-test-computer-cert
(11) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read client
certificate
(11) eap_tls: (TLS) TLS - recv TLS 1.2 Handshake, ClientKeyExchange
(11) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read client
key exchange
(11) eap_tls: (TLS) TLS - recv TLS 1.2 Handshake, CertificateVerify
(11) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read
certificate verify
(11) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read change
cipher spec
(11) eap_tls: (TLS) TLS - recv TLS 1.2 Handshake, Finished
(11) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read finished
(11) eap_tls: (TLS) TLS - send TLS 1.2 ChangeCipherSpec
(11) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write change
cipher spec
(11) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, Finished
(11) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write finished
(11) eap_tls: (TLS) TLS - Handshake state - SSL negotiation finished
successfully
(11) eap_tls: (TLS) TLS - Connection Established
(11) eap_tls:   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(11) eap_tls:   TLS-Session-Version = "TLS 1.2"
(11) eap: Sending EAP Request (code 1) ID 13 length 61
(11) eap: EAP session adding &reply:State = 0x7defb4fc78e2b95d
(11)       [eap] = handled
(11)     } # authenticate = handled
(11)   Using Post-Auth-Type Challenge
(11)   Post-Auth-Type sub-section not found.  Ignoring.
(11)   # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/inner-tunnel
(11)   session-state: Saving cached attributes
(11)     Framed-MTU = 921
(11)     FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(11)     TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(11)     TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHello"
(11)     TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
Certificate"
(11)     TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerKeyExchange"
(11)     TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
CertificateRequest"
(11)     TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHelloDone"
(11)     TLS-Session-Information = "(TLS) TLS - recv TLS 1.2 Handshake,
Certificate"
(11)     TLS-Session-Information = "(TLS) TLS - recv TLS 1.2 Handshake,
ClientKeyExchange"
(11)     TLS-Session-Information = "(TLS) TLS - recv TLS 1.2 Handshake,
CertificateVerify"
(11)     TLS-Session-Information = "(TLS) TLS - recv TLS 1.2 Handshake,
Finished"
(11)     TLS-Session-Information = "(TLS) TLS - send TLS 1.2
ChangeCipherSpec"
(11)     TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
Finished"
(11)     TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(11)     TLS-Session-Version = "TLS 1.2"
(11) } # server inner-tunnel
(11) Virtual server sending reply
(11)   EAP-Message =
0x010d003d0d800000003314030300010116030300284b0980d6c04907e41037ad5459c7884193c3d80ae2ec77e9686592d1177097310d38aa48faf6dc1e
(11)   Message-Authenticator = 0x00000000000000000000000000000000
(11)   State = 0x7defb4fc78e2b95db3aeb6a1b768d4cd
(11) eap_teap: Got tunneled Access-Challenge
(11) eap: Sending EAP Request (code 1) ID 13 length 100
(11) eap: EAP session adding &reply:State = 0xb96c70f8b26147a8
(11)     [eap] = handled
(11)   } # authenticate = handled
(11) Using Post-Auth-Type Challenge
(11) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(11)   Challenge { ... } # empty sub-section is ignored
(11) session-state: Saving cached attributes
(11)   Framed-MTU = 984
(11)   FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(11)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake,
ClientHello"
(11)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHello"
(11)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Certificate"
(11)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerKeyExchange"
(11)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHelloDone"
(11)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake,
ClientKeyExchange"
(11)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake,
Finished"
(11)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
ChangeCipherSpec"
(11)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Finished"
(11)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(11)   TLS-Session-Version = "TLS 1.2"
(11) Sent Access-Challenge Id 211 from 10.78.5.223:1645 to 10.78.1.215:1645
length 158
(11)   EAP-Message =
0x010d006437011703030059b50c72a1ebc221fc8aae6c4e6e83aa0a7dc0488aa2db9d920deb0da38784df260e91010e9997ac6f1266827426dde5035fdb421141aedefa524373ab9b2460ae78d3cf471d2145ad36d3451f46d59557f4557d4de724faf841
(11)   Message-Authenticator = 0x00000000000000000000000000000000
(11)   State = 0xb96c70f8b26147a877ea72b373cfca2f
(11) Finished request
Waking up in 0.4 seconds.
(8) Cleaning up request packet ID 208 with timestamp +12 due to
cleanup_delay was reached
Waking up in 1.6 seconds.
(12) Received Access-Request Id 212 from 10.78.1.215:1645 to
10.78.5.223:1645 length 303
(12)   User-Name = "anonymous"
(12)   Service-Type = Framed-User
(12)   Cisco-AVPair = "service-type=Framed"
(12)   Framed-MTU = 1500
(12)   Called-Station-Id = "00-3C-10-AB-A2-8A"
(12)   Calling-Station-Id = "C8-F7-50-08-DD-9F"
(12)   EAP-Message =
0x020d002d3701170303002200000000000000079fd05d67fc0c2506960b63e8340feb76bf4fa44884f675ebc89b
(12)   Message-Authenticator = 0xe3990034841c5d886cabad5619ae39fa
(12)   Cisco-AVPair = "audit-session-id=0A4E01D7000007122D1A1862"
(12)   Cisco-AVPair = "method=dot1x"
(12)   NAS-IP-Address = 10.78.1.215
(12)   NAS-Port-Id = "GigabitEthernet1/0/10"
(12)   NAS-Port-Type = Ethernet
(12)   NAS-Port = 50110
(12)   State = 0xb96c70f8b26147a877ea72b373cfca2f
(12) Restoring &session-state
(12)   &session-state:Framed-MTU = 984
(12)   &session-state:FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(12)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3
Handshake, ClientHello"
(12)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHello"
(12)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Certificate"
(12)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerKeyExchange"
(12)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHelloDone"
(12)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2
Handshake, ClientKeyExchange"
(12)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2
Handshake, Finished"
(12)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
ChangeCipherSpec"
(12)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Finished"
(12)   &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"
(12)   &session-state:TLS-Session-Version = "TLS 1.2"
(12) # Executing section authorize from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(12)   authorize {
(12)     policy filter_username {
(12)       if (&User-Name) {
(12)       if (&User-Name)  -> TRUE
(12)       if (&User-Name)  {
(12)         if (&User-Name =~ / /) {
(12)         if (&User-Name =~ / /)  -> FALSE
(12)         if (&User-Name =~ /@[^@]*@/ ) {
(12)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(12)         if (&User-Name =~ /\.\./ ) {
(12)         if (&User-Name =~ /\.\./ )  -> FALSE
(12)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(12)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(12)         if (&User-Name =~ /\.$/)  {
(12)         if (&User-Name =~ /\.$/)   -> FALSE
(12)         if (&User-Name =~ /@\./)  {
(12)         if (&User-Name =~ /@\./)   -> FALSE
(12)       } # if (&User-Name)  = notfound
(12)     } # policy filter_username = notfound
(12)     [preprocess] = ok
(12)     [chap] = noop
(12)     [mschap] = noop
(12)     [digest] = noop
(12) suffix: Checking for suffix after "@"
(12) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(12) suffix: No such realm "NULL"
(12)     [suffix] = noop
(12) eap: Peer sent EAP Response (code 2) ID 13 length 45
(12) eap: Continuing tunnel setup
(12)     [eap] = ok
(12)   } # authorize = ok
(12) Found Auth-Type = eap
(12) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(12)   authenticate {
(12) eap: Removing EAP session with state 0xb96c70f8b26147a8
(12) eap: Previous EAP request found for state 0xb96c70f8b26147a8, released
from the list
(12) eap: Peer sent packet with method EAP TEAP (55)
(12) eap: Calling submodule eap_teap to process data
(12) eap_teap: Authenticate
(12) eap_teap: (TLS) EAP Done initial handshake
(12) eap_teap: Session established.  Proceeding to decode tunneled
attributes
(12) eap_teap: Got Tunneled TEAP TLVs
(12) eap_teap:   FreeRADIUS-EAP-TEAP-EAP-Payload = 0x020d00060d00
(12) eap_teap: Processing received EAP Payload
(12) eap_teap: Got tunneled request
(12) eap_teap:   EAP-Message = 0x020d00060d00
(12) eap_teap: AUTHENTICATION
(12) Virtual server inner-tunnel received request
(12)   EAP-Message = 0x020d00060d00
(12)   FreeRADIUS-Proxied-To = 127.0.0.1
(12)   User-Name = "host/martin-test-computer-cert"
(12)   State = 0x7defb4fc78e2b95db3aeb6a1b768d4cd
(12) server inner-tunnel {
(12)   Restoring &session-state
(12)     &session-state:Framed-MTU = 921
(12)     &session-state:FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(12)     &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3
Handshake, ClientHello"
(12)     &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerHello"
(12)     &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, Certificate"
(12)     &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerKeyExchange"
(12)     &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, CertificateRequest"
(12)     &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerHelloDone"
(12)     &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.2
Handshake, Certificate"
(12)     &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.2
Handshake, ClientKeyExchange"
(12)     &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.2
Handshake, CertificateVerify"
(12)     &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.2
Handshake, Finished"
(12)     &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
ChangeCipherSpec"
(12)     &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, Finished"
(12)     &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"
(12)     &session-state:TLS-Session-Version = "TLS 1.2"
(12)   # Executing section authorize from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/inner-tunnel
(12)     authorize {
(12)       policy filter_username {
(12)         if (&User-Name) {
(12)         if (&User-Name)  -> TRUE
(12)         if (&User-Name)  {
(12)           if (&User-Name =~ / /) {
(12)           if (&User-Name =~ / /)  -> FALSE
(12)           if (&User-Name =~ /@[^@]*@/ ) {
(12)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(12)           if (&User-Name =~ /\.\./ ) {
(12)           if (&User-Name =~ /\.\./ )  -> FALSE
(12)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(12)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(12)           if (&User-Name =~ /\.$/)  {
(12)           if (&User-Name =~ /\.$/)   -> FALSE
(12)           if (&User-Name =~ /@\./)  {
(12)           if (&User-Name =~ /@\./)   -> FALSE
(12)         } # if (&User-Name)  = notfound
(12)       } # policy filter_username = notfound
(12)       [chap] = noop
(12)       [mschap] = noop
(12) suffix: Checking for suffix after "@"
(12) suffix: No '@' in User-Name = "host/martin-test-computer-cert",
looking up realm NULL
(12) suffix: No such realm "NULL"
(12)       [suffix] = noop
(12) eap: Peer sent EAP Response (code 2) ID 13 length 6
(12) eap: No EAP Start, assuming it's an on-going EAP conversation
(12)       [eap] = updated
(12)       [files] = noop
(12)       [expiration] = noop
(12)       [logintime] = noop
(12)       [pap] = noop
(12)     } # authorize = updated
(12)   Found Auth-Type = eap
(12)   # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/inner-tunnel
(12)     authenticate {
(12) eap: Removing EAP session with state 0x7defb4fc78e2b95d
(12) eap: Previous EAP request found for state 0x7defb4fc78e2b95d, released
from the list
(12) eap: Peer sent packet with method EAP TLS (13)
(12) eap: Calling submodule eap_tls to process data
(12) eap_tls: (TLS) Peer ACKed our handshake fragment.  handshake is
finished
(12) eap: Sending EAP Success (code 3) ID 13 length 4
(12) eap: Freeing handler
(12)       [eap] = ok
(12)     } # authenticate = ok
(12)   # Executing section post-auth from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/inner-tunnel
(12)     post-auth {
(12)       if (0) {
(12)       if (0)  -> FALSE
(12)     } # post-auth = noop
(12) } # server inner-tunnel
(12) Virtual server sending reply
(12)   MS-MPPE-Recv-Key =
0x49c82b462cc178f55542ee720b657f67328d84794fadea709c3a63344e64c86d
(12)   MS-MPPE-Send-Key =
0xafb70bfd2a7885096e14eb5a435dee55246b9203641576bfa1423d9b2744c04e
(12)   EAP-MSK =
0x49c82b462cc178f55542ee720b657f67328d84794fadea709c3a63344e64c86dafb70bfd2a7885096e14eb5a435dee55246b9203641576bfa1423d9b2744c04e
(12)   EAP-EMSK =
0xf473639c2f507e2fc734c892b92ed54c4b07e181a19a7c86d0fd2e7787a86b7d7c345cbb2e06b66ef1cb9a78ec1e6eb8467da97d761153535a184e78f584e4f0
(12)   EAP-Session-Id =
0x0d2bb742551508e9810af2a3066e858cc683baad68e8b64af77d3edfaf1acd3669b906f27a94e08eda6e136b0b4fa3a6b0a4927c113289f056e0de5cad1f540bc8
(12)   EAP-Message = 0x030d0004
(12)   Message-Authenticator = 0x00000000000000000000000000000000
(12)   User-Name = "host/martin-test-computer-cert"
(12) eap_teap: Got tunneled Access-Accept
(12) eap_teap: MSCHAP_MPPE_RECV_KEY [high MSK] - hexdump(len=32): 49 c8 2b
46 2c c1 78 f5 55 42 ee 72 0b 65 7f 67 32 8d 84 79 4f ad ea 70 9c 3a 63 34
4e 64 c8 6d
(12) eap_teap: MSCHAP_MPPE_SEND_KEY [low MSK] - hexdump(len=32): af b7 0b
fd 2a 78 85 09 6e 14 eb 5a 43 5d ee 55 24 6b 92 03 64 15 76 bf a1 42 3d 9b
27 44 c0 4e
(12) eap_teap: Sending Cryptobinding
(12) eap_teap: Updating ICMK (j = 1)
(12) eap_teap: IMSK from MSK - hexdump(len=32): 49 c8 2b 46 2c c1 78 f5 55
42 ee 72 0b 65 7f 67 32 8d 84 79 4f ad ea 70 9c 3a 63 34 4e 64 c8 6d
(12) eap_teap: MSK S-IMCK[j] - hexdump(len=40): 05 3d 77 c1 00 f3 6a 9c 7a
d7 86 5d 80 11 f3 c0 91 7d 69 b1 d8 12 ac 4e 1f ce 94 3d df 04 74 48 b6 49
15 19 4b ee 1a 6f
(12) eap_teap: MSK CMK[j] - hexdump(len=20): ef 36 d1 cd a9 6b fa 02 03 3e
10 d5 2f 7e 4f 3d b2 ea c5 b1
(12) eap_teap: IMSK from EMSK - hexdump(len=32): dd e9 dd 31 e2 7d 21 e6 42
f6 38 57 7e fe 81 60 ca 22 02 15 83 bd 21 31 84 0f 13 4d 38 e9 30 c7
(12) eap_teap: EMSK S-IMCK[j] - hexdump(len=40): b3 57 7c 1d f9 86 7d f0 46
36 27 3c 44 bb f8 5d 1d ae c0 ca f9 83 29 de d4 32 e7 7f b0 12 18 a7 bc a8
cc 4e 2f 5f 3b a0
(12) eap_teap: EMSK CMK[j] - hexdump(len=20): 85 da d4 44 72 fa 8f 4b 7d 3e
2d 45 48 f6 53 16 32 17 29 8b
(12) eap_teap: BUFFER for Compound MAC calculation - hexdump(len=89): 80 0c
00 4c 00 01 ff 30 20 d4 a1 7e a3 e4 26 b5 9e 5b a4 89 0e 39 fa 9b 1d 90 23
1c ee 55 1a fa b4 56 0f 20 71 3d 4d d2 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 37 00 01 00 04 31 32 33 34
(12) eap_teap: &session-state:FreeRADIUS-EAP-TEAP-TLV-Identity-Type set so
continuing EAP sequence/chaining
(12) eap_teap: Sending EAP-Identity
(12) eap: Sending EAP Request (code 1) ID 14 length 136
(12) eap: EAP session adding &reply:State = 0xb96c70f8b56247a8
(12)     [eap] = handled
(12)   } # authenticate = handled
(12) Using Post-Auth-Type Challenge
(12) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(12)   Challenge { ... } # empty sub-section is ignored
(12) session-state: Saving cached attributes
(12)   Framed-MTU = 984
(12)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake,
ClientHello"
(12)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHello"
(12)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Certificate"
(12)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerKeyExchange"
(12)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHelloDone"
(12)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake,
ClientKeyExchange"
(12)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake,
Finished"
(12)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
ChangeCipherSpec"
(12)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Finished"
(12)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(12)   TLS-Session-Version = "TLS 1.2"
(12) Sent Access-Challenge Id 212 from 10.78.5.223:1645 to 10.78.1.215:1645
length 194
(12)   EAP-Message =
0x010e00883701170303007db50c72a1ebc221fd55214c01b764d9553ee14d9f573993a4ab372ca5faf43144eccc03534bfde3eccae7cd0e7fa438f8e06f2a62e6cb347499f75a828b2898a4ec5da43986656a05841cb9f470f158044eace8a15e9d879aff28b865b7d081062fb030710003837bf7d7f0b8a0cb779a640a42d59540d16034aacf8768
(12)   Message-Authenticator = 0x00000000000000000000000000000000
(12)   State = 0xb96c70f8b56247a877ea72b373cfca2f
(12) Finished request
Waking up in 0.8 seconds.
(9) Cleaning up request packet ID 209 with timestamp +14 due to
cleanup_delay was reached
Waking up in 1.4 seconds.
(13) Received Access-Request Id 213 from 10.78.1.215:1645 to
10.78.5.223:1645 length 424
(13)   User-Name = "anonymous"
(13)   Service-Type = Framed-User
(13)   Cisco-AVPair = "service-type=Framed"
(13)   Framed-MTU = 1500
(13)   Called-Station-Id = "00-3C-10-AB-A2-8A"
(13)   Calling-Station-Id = "C8-F7-50-08-DD-9F"
(13)   EAP-Message =
0x020e00a63701170303009b0000000000000008d4fd60c5e860e1ce002235eb4cd747998027f11c8a7ac4e6228e0e3ab1935b043cebc9760c501258c6f35f414e2b8ea8f811eefea4569baf8ff638547e6cc61fd0c368049b25b72a7cd878dd805edb651fba526676d8cb7e7d9ff1644726132ac24f976d19bb75c5945573d2071342aa9693a96a190e6087f4fec00f177c793299136ef483d2fe58fdb309645b3b22e462d41a
(13)   Message-Authenticator = 0xf9df7f9a362be755a0d88d4a669cc2ed
(13)   Cisco-AVPair = "audit-session-id=0A4E01D7000007122D1A1862"
(13)   Cisco-AVPair = "method=dot1x"
(13)   NAS-IP-Address = 10.78.1.215
(13)   NAS-Port-Id = "GigabitEthernet1/0/10"
(13)   NAS-Port-Type = Ethernet
(13)   NAS-Port = 50110
(13)   State = 0xb96c70f8b56247a877ea72b373cfca2f
(13) Restoring &session-state
(13)   &session-state:Framed-MTU = 984
(13)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3
Handshake, ClientHello"
(13)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHello"
(13)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Certificate"
(13)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerKeyExchange"
(13)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHelloDone"
(13)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2
Handshake, ClientKeyExchange"
(13)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2
Handshake, Finished"
(13)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
ChangeCipherSpec"
(13)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Finished"
(13)   &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"
(13)   &session-state:TLS-Session-Version = "TLS 1.2"
(13) # Executing section authorize from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(13)   authorize {
(13)     policy filter_username {
(13)       if (&User-Name) {
(13)       if (&User-Name)  -> TRUE
(13)       if (&User-Name)  {
(13)         if (&User-Name =~ / /) {
(13)         if (&User-Name =~ / /)  -> FALSE
(13)         if (&User-Name =~ /@[^@]*@/ ) {
(13)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(13)         if (&User-Name =~ /\.\./ ) {
(13)         if (&User-Name =~ /\.\./ )  -> FALSE
(13)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(13)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(13)         if (&User-Name =~ /\.$/)  {
(13)         if (&User-Name =~ /\.$/)   -> FALSE
(13)         if (&User-Name =~ /@\./)  {
(13)         if (&User-Name =~ /@\./)   -> FALSE
(13)       } # if (&User-Name)  = notfound
(13)     } # policy filter_username = notfound
(13)     [preprocess] = ok
(13)     [chap] = noop
(13)     [mschap] = noop
(13)     [digest] = noop
(13) suffix: Checking for suffix after "@"
(13) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(13) suffix: No such realm "NULL"
(13)     [suffix] = noop
(13) eap: Peer sent EAP Response (code 2) ID 14 length 166
(13) eap: Continuing tunnel setup
(13)     [eap] = ok
(13)   } # authorize = ok
(13) Found Auth-Type = eap
(13) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(13)   authenticate {
(13) eap: Removing EAP session with state 0xb96c70f8b56247a8
(13) eap: Previous EAP request found for state 0xb96c70f8b56247a8, released
from the list
(13) eap: Peer sent packet with method EAP TEAP (55)
(13) eap: Calling submodule eap_teap to process data
(13) eap_teap: Authenticate
(13) eap_teap: (TLS) EAP Done initial handshake
(13) eap_teap: Session established.  Proceeding to decode tunneled
attributes
(13) eap_teap: Got Tunneled TEAP TLVs
(13) eap_teap:   FreeRADIUS-EAP-TEAP-Crypto-Binding =
0x0001012120d4a17ea3e426b59e5ba4890e39fa9b1d90231cee551afab4560f20713d4dd30000000000000000000000000000000000000000eded82e4898493cf26b6208f3d491c1c9aa998cb
(13) eap_teap:   FreeRADIUS-EAP-TEAP-Intermediate-Result = Success
(13) eap_teap:   FreeRADIUS-EAP-TEAP-Identity-Type = Machine
(13) eap_teap:   FreeRADIUS-EAP-TEAP-EAP-Payload =
0x020e002301686f73742f6d617274696e2d746573742d636f6d70757465722d63657274
(13) eap_teap: Crypto-Binding TLV version mis-match (possible downgrade
attack!)
(13) eap: ERROR: Failed continuing EAP TEAP (55) session.  EAP sub-module
failed
(13) eap: Sending EAP Failure (code 4) ID 14 length 4
(13) eap: Failed in EAP select
(13)     [eap] = invalid
(13)   } # authenticate = invalid
(13) Failed to authenticate the user
(13) Using Post-Auth-Type Reject
(13) # Executing group from file
/etc/freeradius-server-3.2.x/raddb/sites-enabled/default
(13)   Post-Auth-Type REJECT {
(13) attr_filter.access_reject: EXPAND %{User-Name}
(13) attr_filter.access_reject:    --> anonymous
(13) attr_filter.access_reject: Matched entry DEFAULT at line 11
(13)     [attr_filter.access_reject] = updated
(13)     [eap] = noop
(13)     policy remove_reply_message_if_eap {
(13)       if (&reply:EAP-Message && &reply:Reply-Message) {
(13)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(13)       else {
(13)         [noop] = noop
(13)       } # else = noop
(13)     } # policy remove_reply_message_if_eap = noop
(13)   } # Post-Auth-Type REJECT = updated
(13) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.4 seconds.
(10) Cleaning up request packet ID 210 with timestamp +15 due to
cleanup_delay was reached
Waking up in 0.2 seconds.
(13) Sending delayed response
(13) Sent Access-Reject Id 213 from 10.78.5.223:1645 to 10.78.1.215:1645
length 44
(13)   EAP-Message = 0x040e0004
(13)   Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 1.2 seconds.
(11) Cleaning up request packet ID 211 with timestamp +17 due to
cleanup_delay was reached
Waking up in 1.2 seconds.
(12) Cleaning up request packet ID 212 with timestamp +18 due to
cleanup_delay was reached
Waking up in 1.5 seconds.
(13) Cleaning up request packet ID 213 with timestamp +20 due to
cleanup_delay was reached
Ready to process requests

Am Mi., 4. Dez. 2024 um 18:48 Uhr schrieb Alan DeKok <
aland@deployingradius.com>:
...
On Dec 4, 2024, at 6:38 AM, Alan DeKok <aland@deployingradius.com> wrote:
...
So let's try some FreeRADIUS configuration magic.  This is undocumented
right now, because "TEAP", but here goes:
In the interest of *not* hating people who use TEAP, I've pushed some
patches.  They are "compile tested", but I haven't had time to do full TEAP
tests.
Please test and see if they work.
The changes are to the TEAP configuration:
https://github.com/FreeRADIUS/freeradius-server/blob/v3.2.x/raddb/mods-avail...
Set
identity_types = "machine,user"
to do first machine, then user
set
#       user_eap_type = mschapv2
        #       machine_eap_type = tls
to set EAP types for each type of authentication.
The server *should* automatically figure out what to do.
As with most things, these settings can be over-ridden at run time by
defining attributes.  See the comments in the TEAP module for further
documentation.
Alan DeKok.
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html

Re: EAP-TEAP not doing 2nd inner Method

Martin B.