To answer my question, the NAS was not sending any data and is now fixed and sending accounting. David -----Original Message----- From: freeradius-users-bounces+david.peterson=acc-corp.net@lists.freeradius.org [mailto:freeradius-users-bounces+david.peterson=acc-corp.net@lists.freeradiu s.org] On Behalf Of David Peterson Sent: Friday, July 09, 2010 9:02 AM To: 'FreeRadius users mailing list' Subject: Accounting and SQL I have accounting and SQL set up (probably broken). I see the debug showing it updating table radacct but the table remains empty. root@ubuntu:/usr/local/etc/raddb# radiusd -X FreeRADIUS Version 2.1.10, for host i686-pc-linux-gnu, built on Jun 21 2010 at 14:47:46 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including configuration file /usr/local/etc/raddb/sites-available/dynamic-clients including files in directory /usr/local/etc/raddb/modules/ including configuration file /usr/local/etc/raddb/modules/passwd including configuration file /usr/local/etc/raddb/modules/mac2vlan including configuration file /usr/local/etc/raddb/modules/policy including configuration file /usr/local/etc/raddb/modules/wimax including configuration file /usr/local/etc/raddb/modules/ippool including configuration file /usr/local/etc/raddb/modules/radutmp including configuration file /usr/local/etc/raddb/modules/smsotp including configuration file /usr/local/etc/raddb/modules/echo including configuration file /usr/local/etc/raddb/modules/expr including configuration file /usr/local/etc/raddb/modules/pam including configuration file /usr/local/etc/raddb/modules/inner-eap including configuration file /usr/local/etc/raddb/modules/logintime including configuration file /usr/local/etc/raddb/modules/ldap including configuration file /usr/local/etc/raddb/modules/pap including configuration file /usr/local/etc/raddb/modules/ntlm_auth including configuration file /usr/local/etc/raddb/modules/preprocess including configuration file /usr/local/etc/raddb/modules/unix including configuration file /usr/local/etc/raddb/modules/attr_rewrite including configuration file /usr/local/etc/raddb/modules/etc_group including configuration file /usr/local/etc/raddb/modules/linelog including configuration file /usr/local/etc/raddb/modules/sqlcounter_expire_on_login including configuration file /usr/local/etc/raddb/modules/digest including configuration file /usr/local/etc/raddb/modules/otp including configuration file /usr/local/etc/raddb/modules/realm including configuration file /usr/local/etc/raddb/modules/acct_unique including configuration file /usr/local/etc/raddb/modules/attr_filter including configuration file /usr/local/etc/raddb/modules/perl including configuration file /usr/local/etc/raddb/modules/krb5 including configuration file /usr/local/etc/raddb/modules/checkval including configuration file /usr/local/etc/raddb/modules/files including configuration file /usr/local/etc/raddb/modules/cui including configuration file /usr/local/etc/raddb/modules/exec including configuration file /usr/local/etc/raddb/modules/expiration including configuration file /usr/local/etc/raddb/modules/smbpasswd including configuration file /usr/local/etc/raddb/modules/detail.log including configuration file /usr/local/etc/raddb/modules/mschap including configuration file /usr/local/etc/raddb/modules/sradutmp including configuration file /usr/local/etc/raddb/modules/counter including configuration file /usr/local/etc/raddb/modules/mac2ip including configuration file /usr/local/etc/raddb/modules/detail including configuration file /usr/local/etc/raddb/modules/detail.example.com including configuration file /usr/local/etc/raddb/modules/chap including configuration file /usr/local/etc/raddb/modules/sql_log including configuration file /usr/local/etc/raddb/modules/always including configuration file /usr/local/etc/raddb/eap.conf including configuration file /usr/local/etc/raddb/sql.conf including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf including configuration file /usr/local/etc/raddb/sql/mysql/counter.conf including configuration file /usr/local/etc/raddb/policy.conf including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/default including configuration file /usr/local/etc/raddb/sites-enabled/control-socket including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel main { allow_core_dumps = no } including dictionary file /usr/local/etc/raddb/dictionary main { prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### realm WiMax.com { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client dynamic { ipaddr = 192.168.0.0 netmask = 16 require_message_authenticator = no dynamic_clients = "dynamic_client_server" lifetime = 86400 } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server dynamic_client_server { modules { Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_always Module: Instantiating ok always ok { rcode = "ok" simulcount = 0 mpp = no } } # modules } # server server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" CA_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/usr/local/etc/raddb/certs/dh" random_file = "/usr/local/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/usr/local/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/usr/local/etc/raddb/users" acctusersfile = "/usr/local/etc/raddb/acct_users" preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" compat = "no" } Module: Linked to module rlm_sql Module: Instantiating sql sql { driver = "rlm_sql_mysql" server = "localhost" port = "" login = "root" password = "unl0ck" radius_db = "radius" read_groups = yes sqltrace = no sqltracefile = "/usr/local/var/log/radius/sqltrace.sql" readclients = no deletestalesessions = yes num_sql_socks = 5 lifetime = 0 max_queries = 0 sql_user_name = "%{User-Name}" default_user_profile = "" nas_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = BINARY '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = BINARY '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" accounting_onoff_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = unix_timestamp('%S') - unix_timestamp(acctstarttime), acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = %{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= '%S'" accounting_update_query = " UPDATE radacct SET framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_update_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctsessiontime, acctauthentic, connectinfo_start, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, servicetype, framedprotocol, framedipaddress, acctstartdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query_alt = " UPDATE radacct SET acctstarttime = '%S', acctstartdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_start = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{%{Acct-Delay-Time}:-0}')" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = BINARY '%{SQL-User-Name}' ORDER BY priority" connect_failure_retry_delay = 60 simul_count_query = "" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" postauth_query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to root@localhost:/radius rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/usr/local/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { modules { Module: Checking authenticate {...} for more modules to load Module: Instantiating attr_filter.access_challenge attr_filter attr_filter.access_challenge { attrsfile = "/usr/local/etc/raddb/attrs.access_challenge" key = "%{User-Name}" } Module: Instantiating handled always handled { rcode = "handled" simulcount = 0 mpp = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/usr/local/etc/raddb/huntgroups" hints = "/usr/local/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_wimax Module: Instantiating wimax wimax { delete_mppe_keys = yes } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/usr/local/var/run/radiusd/radiusd.sock" } } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /usr/local/var/run/radiusd/radiusd.sock Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.60.50 port 49154, id=22, length=163 server dynamic_client_server { rlm_sql (sql): Reserving sql socket id: 4 rlm_sql (sql): Released sql socket id: 4 rlm_sql (sql): Reserving sql socket id: 3 rlm_sql (sql): Released sql socket id: 3 rlm_sql (sql): Reserving sql socket id: 2 rlm_sql (sql): Released sql socket id: 2 rlm_sql (sql): Reserving sql socket id: 1 rlm_sql (sql): Released sql socket id: 1 } # server dynamic_client_server - Added client 192.168.60.50 with shared secret unl0ck rad_recv: Access-Request packet from host 192.168.60.50 port 49154, id=22, length=163 User-Name = "KeepAliveUserNameAndPassword" NAS-IP-Address = 192.168.60.50 NAS-Port-Type = 27 NAS-Port = 0 Calling-Station-Id = "\000\000\000\000\000" NAS-Identifier = "001001001000032000" WiMAX-GMT-Timezone-offset = 0 Acct-Session-Id = "KeepAliveSessionId" User-Password = "KeepAliveUserNameAndPassword" +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop rlm_wimax: Fixing WiMAX binary Calling-Station-Id to 00-00-00-00-00-00 ++[wimax] returns ok [suffix] No '@' in User-Name = "KeepAliveUserNameAndPassword", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop [sql] expand: %{User-Name} -> KeepAliveUserNameAndPassword [sql] sql_set_user escaped user --> 'KeepAliveUserNameAndPassword' rlm_sql (sql): Reserving sql socket id: 0 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = BINARY '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = BINARY 'KeepAliveUserNameAndPassword' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = BINARY '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = BINARY 'KeepAliveUserNameAndPassword' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = BINARY '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = BINARY 'KeepAliveUserNameAndPassword' ORDER BY priority rlm_sql (sql): Released sql socket id: 0 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop WARNING: Please update your configuration, and remove 'Auth-Type = Local' WARNING: Use the PAP or CHAP modules instead. User-Password in the request is correct. +- entering group post-auth {...} [sql] expand: %{User-Name} -> KeepAliveUserNameAndPassword [sql] sql_set_user escaped user --> 'KeepAliveUserNameAndPassword' [sql] expand: %{User-Password} -> KeepAliveUserNameAndPassword [sql] expand: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') -> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'KeepAliveUserNameAndPassword', 'KeepAliveUserNameAndPassword', 'Access-Accept', '2010-07-08 16:11:46') rlm_sql (sql) in sql_postauth: query is INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'KeepAliveUserNameAndPassword', 'KeepAliveUserNameAndPassword', 'Access-Accept', '2010-07-08 16:11:46') rlm_sql (sql): Reserving sql socket id: 4 rlm_sql (sql): Released sql socket id: 4 ++[sql] returns ok ++[exec] returns noop expand: %{User-Name} -> KeepAliveUserNameAndPassword expand: %{EAP-MSK} -> ++[reply] returns noop [wimax] No EAP-MSK or EAP-EMSK. Cannot create WiMAX keys. ++[wimax] returns noop Sending Access-Accept of id 22 to 192.168.60.50 port 49154 WiMAX-IP-Technology = CMIP4 WiMAX-FA-RK-Key = 0x00 WiMAX-MSK = 0x Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Accounting-Request packet from host 192.168.60.50 port 49155, id=14, length=135 User-Name = "KeepAliveUserNameAndPassword" NAS-IP-Address = 192.168.60.50 NAS-Port-Type = 27 NAS-Port = 0 Calling-Station-Id = "\000\000\000\000\000" NAS-Identifier = "001001001000032000" WiMAX-GMT-Timezone-offset = 0 Acct-Status-Type = Stop Acct-Session-Id = "KeepAliveSessionId" +- entering group preacct {...} ++[preprocess] returns ok expand: %{Acct-Session-Time} -> ... expanding second conditional expand: %{Acct-Delay-Time} -> ... expanding second conditional expand: %l - %{%{Acct-Session-Time}:-0} - %{%{Acct-Delay-Time}:-0} -> 1278619906 - 0 - 0 expand: %{expr: %l - %{%{Acct-Session-Time}:-0} - %{%{Acct-Delay-Time}:-0}} -> 1278619906 ++[request] returns ok [acct_unique] Hashing 'NAS-Port = 0,Client-IP-Address = 192.168.60.50,NAS-IP-Address = 192.168.60.50,Acct-Session-Id = "KeepAliveSessionId",User-Name = "KeepAliveUserNameAndPassword"' [acct_unique] Acct-Unique-Session-ID = "3e3e3f7489ea6051". ++[acct_unique] returns ok [suffix] No '@' in User-Name = "KeepAliveUserNameAndPassword", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[files] returns noop +- entering group accounting {...} ++[unix] returns ok [radutmp] expand: /usr/local/var/log/radius/radutmp -> /usr/local/var/log/radius/radutmp [radutmp] expand: %{User-Name} -> KeepAliveUserNameAndPassword rlm_radutmp: Logout for NAS Extreme 5000 port 0, but no Login record ++[radutmp] returns ok [sql] expand: %{User-Name} -> KeepAliveUserNameAndPassword [sql] sql_set_user escaped user --> 'KeepAliveUserNameAndPassword' [sql] expand: %{Acct-Input-Gigawords} -> [sql] ... expanding second conditional [sql] expand: %{Acct-Input-Octets} -> [sql] ... expanding second conditional [sql] expand: %{Acct-Output-Gigawords} -> [sql] ... expanding second conditional [sql] expand: %{Acct-Output-Octets} -> [sql] ... expanding second conditional [sql] expand: %{Acct-Delay-Time} -> [sql] ... expanding second conditional [sql] expand: UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}' -> UPDATE radacct SET acctstoptime = '2010-07-08 16:11:46', acctsessiontime = '', acctinputoctets = '0' << 32 | '0', acctoutputoctets = '0' << 32 | rlm_sql (sql): Reserving sql socket id: 3 [sql] expand: stop packet with zero session length. [user '%{User-Name}', nas '%{NAS-IP-Address}'] -> stop packet with zero session length. [user 'KeepAliveUserNameAndPassword', nas '192.168.60.50'] [sql] stop packet with zero session length. [user 'KeepAliveUserNameAndPassword', nas '192.168.60.50'] rlm_sql (sql): Released sql socket id: 3 ++[sql] returns noop ++? if (noop) ? Evaluating (noop) -> TRUE ++? if (noop) -> TRUE ++- entering if (noop) {...} +++[ok] returns ok ++- if (noop) returns ok [attr_filter.accounting_response] expand: %{User-Name} -> KeepAliveUserNameAndPassword attr_filter: Matched entry DEFAULT at line 12 ++[attr_filter.accounting_response] returns updated Sending Accounting-Response of id 14 to 192.168.60.50 port 49155 Finished request 1. Cleaning up request 1 ID 14 with timestamp +25 Going to the next request Waking up in 4.9 seconds. Cleaning up request 0 ID 22 with timestamp +25 Ready to process requests. David Peterson - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html