-----Original Message----- From: freeradius-users-bounces+jmoe=hatch.com.au@lists.freeradius.org [mailto:freeradius-users- bounces+jmoe=hatch.com.au@lists.freeradius.org] On Behalf Of Sallee, Stephen (Jake) Sent: Wednesday, 2 March 2011 8:36 AM To: FreeRadius users mailing list Subject: RE: Clarification / Confirmation needed re: Free Radius againstActive Directory
Just a word of warning, manually setting Authtype = ANTHING is usually a bad idea. FR is really good about figuring out what to do all on its own, if you force an auth type it will very likely break something else.
Jake Sallee Network Engineer University of Mary Hardin-Baylor Fone: 254-295-4658 Phax: 254-295-4221
-----Original Message----- From: freeradius-users- bounces+jake.sallee=umhb.edu@lists.freeradius.org [mailto:freeradius-users- bounces+jake.sallee=umhb.edu@lists.freeradius.org] On Behalf Of Moe, John Sent: Tuesday, March 01, 2011 3:26 PM To: FreeRadius users mailing list Subject: RE: Clarification / Confirmation needed re: FreeRadius against ActiveDirectory
-----Original Message----- From: freeradius-users- bounces+jmoe=hatch.com.au@lists.freeradius.org [mailto:freeradius-users- bounces+jmoe=hatch.com.au@lists.freeradius.org] On Behalf Of Alan bounces+DeKok Sent: Tuesday, 1 March 2011 5:51 PM To: FreeRadius users mailing list Subject: Re: Clarification / Confirmation needed re: FreeRadius against ActiveDirectory
Moe, John wrote:
Now, I've read a lot of configuration pages (for Ubuntu, Samba, Winbind, and FreeRadius, to name a few) in the last few days, and my head's spinning a bit, and I'd like to make sure I'm doing this right, and I've managed to grasp a few things...
The definitive guide is here:
http://deployingradius.com/documents/configuration/active_directory.ht
m l
It's simple, clear, and contains just enough information to allow you to get it to work.
Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Yeah, the information in that one is, as you said, simple and "just enough". However, it doesn't address either of the two questions I asked.
1) Is setting "Auth-Type = ntlm_auth" the correct way for doing what I want, or have I mis-configured something so that FreeRadius could work out that it needs to use ntlm_auth on its own? 2) How do I match a rule against AD Group membership? This one was answered in a previous reply, and I think I can work out the implementation details from there, I just need to do some work and testing.
If anyone knows the answer to the first question, I'd appreciate it.
John H. Moe Network Support - Hatch IT HATCH Tel: +61 (7) 3166 7777 Direct: +61 (7) 3166 7684 Fax: +61 (7) 3368 3754 Mobile: +61 438 772 425 61 Petrie Terrace, Brisbane, Queensland Australia 4011
Yeah, that's the impression I got from my reading. But it doesn't seem to be able to figure it out on its own, and I can't find any info to tell me why. Any idea why that might be? John H. Moe Network Support - Hatch IT HATCH Tel: +61 (7) 3166 7777 Direct: +61 (7) 3166 7684 Fax: +61 (7) 3368 3754 Mobile: +61 438 772 425 61 Petrie Terrace, Brisbane, Queensland Australia 4011 ***************************** NOTICE - This message from Hatch is intended only for the use of the individual or entity to which it is addressed and may contain information which is privileged, confidential or proprietary. Internet communications cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, arrive late or contain viruses. By communicating with us via e-mail, you accept such risks.� When addressed to our clients, any information, drawings, opinions or advice (collectively, "information") contained in this e-mail is subject to the terms and conditions expressed in the governing agreements.� Where no such agreement exists, the recipient shall neither rely upon nor disclose to others, such information without our written consent.� Unless otherwise agreed, we do not assume any liability with respect to the accuracy or completeness of the information set out in this e-mail.� If you have received this message in error, please notify us immediately by return e-mail and destroy and delete the message from your computer.