Hi, I use freeradius 1.1.7, and my client pc runs windows Vista. I've set up a testuser with a clear-text password in the users file - which works:-). I can connect using the testuser with WPA/WPA2, PEAP, TTLS without problems. But when I try to connect using the local unix users it dosnt work:-((, what am I doing wrong? This is what i got when running in debug -X mode, and trying with root: ########## The user request ############# rad_recv: Access-Request packet from host 172.16.20.240:2056, id=0, length=121 User-Name = "root" NAS-IP-Address = 172.16.20.240 Called-Station-Id = "000001a728a8" Calling-Station-Id = "0013e8c11ed3" NAS-Identifier = "000001a728a8" NAS-Port = 12 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0200000901726f6f74 Message-Authenticator = 0x626a6cc69ca1f0b92f795e2542e86be3 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "root", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 0 length 9 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched entry DEFAULT at line 159 modcall[authorize]: module "files" returns ok for request 0 rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. modcall[authorize]: module "pap" returns noop for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type md5 rlm_eap_md5: Issuing Challenge modcall[authenticate]: module "eap" returns handled for request 0 modcall: leaving group authenticate (returns handled) for request 0 Sending Access-Challenge of id 0 to 172.16.20.240 port 2056 EAP-Message = 0x01010016041054c071964fb44c8680fbb4110fcb766c Message-Authenticator = 0x00000000000000000000000000000000 State = 0x06737742f028b5011a4eecca9b8e7047 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 0 with timestamp 475b3805 Nothing to do. Sleeping until we see a request. This is my configuration from debug mode: loki:/etc/freeradius# freeradius -X -A -y Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/freeradius/proxy.conf Config: including file: /etc/freeradius/clients.conf Config: including file: /etc/freeradius/snmp.conf Config: including file: /etc/freeradius/eap.conf Config: including file: /etc/freeradius/sql.conf main: prefix = "/usr" main: localstatedir = "/var" main: logdir = "/var/log/freeradius" main: libdir = "/usr/lib/freeradius" main: radacctdir = "/var/log/freeradius/radacct" main: hostname_lookups = no main: snmp = no main: max_request_time = 60 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/log/freeradius/radius.log" main: log_auth = yes main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/var/run/freeradius/freeradius.pid" main: user = "freerad" main: group = "freerad" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib/freeradius Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" pap: auto_header = yes Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = yes mschap: require_strong = yes mschap: with_ntdomain_hack = yes mschap: passwd = "(null)" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "/etc/passwd" unix: shadow = "/etc/shadow" unix: group = "/etc/group" unix: radwtmp = "/var/log/freeradius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "md5" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/etc/freeradius/certs/wireless/server_key.pem" tls: certificate_file = "/etc/freeradius/certs/wireless/server_cert.pem" tls: CA_file = "/etc/freeradius/certs/wireless/CA/cacert.pem" tls: private_key_password = "xxxxxxxx" tls: dh_file = "/etc/freeradius/certs/wireless/dh" tls: random_file = "/etc/freeradius/certs/wireless/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "(null)" tls: cipher_list = "(null)" tls: check_cert_issuer = "(null)" rlm_eap_tls: Loading the certificate file as a chain rlm_eap: Loaded and initialized type tls ttls: default_eap_type = "md5" ttls: copy_request_to_tunnel = no ttls: use_tunneled_reply = no rlm_eap: Loaded and initialized type ttls peap: default_eap_type = "mschapv2" peap: copy_request_to_tunnel = no peap: use_tunneled_reply = no peap: proxy_tunneled_request_as_eap = yes rlm_eap: Loaded and initialized type peap mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/etc/freeradius/huntgroups" preprocess: hints = "/etc/freeradius/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no preprocess: with_alvarion_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/etc/freeradius/users" files: acctusersfile = "/etc/freeradius/acct_users" files: preproxy_usersfile = "/etc/freeradius/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/var/log/freeradius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. ----------------------------------- Thanks, Kristian -- View this message in context: http://www.nabble.com/HELP%21-testuser-works%2C-but-local-unix-user-dosn%27t... Sent from the FreeRadius - User mailing list archive at Nabble.com.