Supporting EAP-PWD with a whitelist

21 Feb 2019

      Hello,

we have a freeradius 3.0.17 server configuration which already supports EAP-TTLS and EAP-PEAP. We now want to add support for EAP-PWD. So far this has been quite easy (just enabling the pwd subsection of the EAP module), but I faced some problems with using a whitelist.

As our production setup is quite complex, I explain the issue via the smallest modification to the standard config. A full debug output of this is attached in [1].

A normal whitelist is done like this:

mods-config/files_whitelist/whitelist

bob

DEFAULT Auth-Type := Reject

And this is used in the inner-tunnel:

sites-available/inner-tunnel

authorize {
    filter_username
    chap
    mschap
    suffix

    eap {
        ok = return
    }
    files              # <- get users password, this is substituted by ldap in our production server
    files_whitelist # <- whitelist
    pap
}

This works as intended with TTLS. For adding PWD it does not work, as PWD does not check the return status of the inner-tunnel, this is intended. So I need to do the authorization in the outer server:

sites-available/default

authorize {
    filter_username
    chap
    mschap
    suffix

    eap {
        ok = return
    }
    files_whitelist # <- whitelist
    pap
}

But this now kills the TTLS-Authorization, as users set anonymous as outer identity and this will get blocked in the outer server by the whitelist. A workaround could be to also add "updated = return" to the eap module of the outer server but that would destroy the whitelist for PWD again, as nothing after the eap module gets executed.

So I can either choose the above and PWD works, but nobody can use TTLS with an anonymous identity or I add the "updated = return" and every user in our database can bypass the whitelist via choosing EAP-PWD.

There are two solutions that I can see: (1) Either I only do the authorization in the inner-tunnel (also for PWD) and copy the result via the session-state attributes to the outer server or (2) I introduce an unlang if-clause to the outer server to handle EAP-PWD differently, like:

    eap {
        ok = return
    }
    if (EAP-PWD) {    <- How does this condition look like?
        files_whitelist # <- whitelist
    } else { noop }

Has someone already used EAP-PWD together with a whitelist? What is the preferred solution? Or am I just using the configuration wrong?

Kind regards,

Jan Niklas Richter

[1] As the files modue config is not included in debug output here it is:

mods-config/files/authorize:

bob    Cleartext-Password := "hello"
    Reply-Message := "Hello, %{User-Name}"
bob2    Cleartext-Password := "hello"
    Reply-Message := "Hello, %{User-Name}"

mods-config/files_whitelist/whitelist:

bob
        Reply-Message = "Hello, %{User-Name}"
DEFAULT            Auth-Type := Reject
        Reply-Message = "Your account has been disabled."

Output of radiusd -X:

Requests 0-1 are from bob doing TTLS -> should work, does not

Requests 2-3 are from bob2 doing TTLS -> should not work, is correct

Requests 4-8 are from bob doing EAP-PWD -> should work, is correct

Requests 9-10 are from bob2 doing EAP-PWD -> should not work, is correct

$ radiusd -X
FreeRADIUS Version 3.0.17
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/local/share/freeradius/dictionary
including dictionary file /usr/local/share/freeradius/dictionary.dhcp
including dictionary file /usr/local/share/freeradius/dictionary.vqp
including dictionary file /usr/local/etc/raddb/dictionary
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/mods-enabled/
including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
including configuration file /usr/local/etc/raddb/mods-enabled/utf8
including configuration file /usr/local/etc/raddb/mods-enabled/digest
including configuration file /usr/local/etc/raddb/mods-enabled/detail
including configuration file /usr/local/etc/raddb/mods-enabled/chap
including configuration file /usr/local/etc/raddb/mods-enabled/detail.log
including configuration file /usr/local/etc/raddb/mods-enabled/unix
including configuration file /usr/local/etc/raddb/mods-enabled/expr
including configuration file /usr/local/etc/raddb/mods-enabled/files
including configuration file /usr/local/etc/raddb/mods-enabled/preprocess
including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter
including configuration file /usr/local/etc/raddb/mods-enabled/mschap
including configuration file /usr/local/etc/raddb/mods-enabled/date
including configuration file /usr/local/etc/raddb/mods-enabled/expiration
including configuration file /usr/local/etc/raddb/mods-enabled/exec
including configuration file /usr/local/etc/raddb/mods-enabled/passwd
including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
including configuration file /usr/local/etc/raddb/mods-enabled/always
including configuration file /usr/local/etc/raddb/mods-enabled/realm
including configuration file /usr/local/etc/raddb/mods-enabled/eap
including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap
including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth
including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients
including configuration file /usr/local/etc/raddb/mods-enabled/logintime
including configuration file /usr/local/etc/raddb/mods-enabled/pap
including configuration file /usr/local/etc/raddb/mods-enabled/linelog
including configuration file /usr/local/etc/raddb/mods-enabled/unpack
including configuration file /usr/local/etc/raddb/mods-enabled/soh
including configuration file /usr/local/etc/raddb/mods-enabled/replicate
including configuration file /usr/local/etc/raddb/mods-enabled/echo
including configuration file /usr/local/etc/raddb/mods-enabled/files_whitelist
including files in directory /usr/local/etc/raddb/policy.d/
including configuration file /usr/local/etc/raddb/policy.d/moonshot-targeted-ids
including configuration file /usr/local/etc/raddb/policy.d/abfab-tr
including configuration file /usr/local/etc/raddb/policy.d/debug
including configuration file /usr/local/etc/raddb/policy.d/accounting
including configuration file /usr/local/etc/raddb/policy.d/cui
including configuration file /usr/local/etc/raddb/policy.d/operator-name
including configuration file /usr/local/etc/raddb/policy.d/canonicalization
including configuration file /usr/local/etc/raddb/policy.d/filter
including configuration file /usr/local/etc/raddb/policy.d/eap
including configuration file /usr/local/etc/raddb/policy.d/control
including configuration file /usr/local/etc/raddb/policy.d/dhcp
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
main {
 security {
     allow_core_dumps = no
 }
    name = "radiusd"
    prefix = "/usr/local"
    localstatedir = "/usr/local/var"
    logdir = "/usr/local/var/log/radius"
    run_dir = "/usr/local/var/run/radiusd"
}
main {
    name = "radiusd"
    prefix = "/usr/local"
    localstatedir = "/usr/local/var"
    sbindir = "/usr/local/sbin"
    logdir = "/usr/local/var/log/radius"
    run_dir = "/usr/local/var/run/radiusd"
    libdir = "/usr/local/lib"
    radacctdir = "/usr/local/var/log/radius/radacct"
    hostname_lookups = no
    max_request_time = 30
    cleanup_delay = 5
    max_requests = 16384
    pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
    checkrad = "/usr/local/sbin/checkrad"
    debug_level = 0
    proxy_requests = yes
 log {
     stripped_names = no
     auth = no
     auth_badpass = no
     auth_goodpass = no
     colourise = yes
     msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
     max_attributes = 200
     reject_delay = 1.000000
     status_server = yes
     allow_vulnerable_openssl = "no"
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
     retry_delay = 5
     retry_count = 3
     default_fallback = no
     dead_time = 120
     wake_all_if_all_dead = no
 }
 home_server localhost {
     ipaddr = 127.0.0.1
     port = 1812
     type = "auth"
     secret = <<< secret >>>
     response_window = 20.000000
     response_timeouts = 1
     max_outstanding = 65536
     zombie_period = 40
     status_check = "status-server"
     ping_interval = 30
     check_interval = 30
     check_timeout = 4
     num_answers_to_alive = 3
     revive_interval = 120
  limit {
      max_connections = 16
      max_requests = 0
      lifetime = 0
      idle_timeout = 0
  }
  coa {
      irt = 2
      mrt = 16
      mrc = 5
      mrd = 30
  }
 }
 home_server_pool my_auth_failover {
    type = fail-over
    home_server = localhost
 }
 realm example.com {
    auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
     ipaddr = 127.0.0.1
     require_message_authenticator = no
     secret = <<< secret >>>
     nas_type = "other"
     proto = "*"
  limit {
      max_connections = 16
      lifetime = 0
      idle_timeout = 30
  }
 }
 client localhost_ipv6 {
     ipv6addr = ::1
     require_message_authenticator = no
     secret = <<< secret >>>
  limit {
      max_connections = 16
      lifetime = 0
      idle_timeout = 30
  }
 }
Debugger not attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = digest
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_radutmp
  # Loading module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
      filename = "/usr/local/var/log/radius/sradutmp"
      username = "%{User-Name}"
      case_sensitive = yes
      check_with_nas = yes
      permissions = 420
      caller_id = no
  }
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8
  # Loaded module rlm_digest
  # Loading module "digest" from file /usr/local/etc/raddb/mods-enabled/digest
  # Loaded module rlm_detail
  # Loading module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
  detail {
      filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      escape_filenames = no
      log_packet_header = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap
  # Loading module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail auth_log {
      filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      escape_filenames = no
      log_packet_header = no
  }
  # Loading module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail reply_log {
      filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      escape_filenames = no
      log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
      filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      escape_filenames = no
      log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
      filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      escape_filenames = no
      log_packet_header = no
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix
  unix {
      radwtmp = "/usr/local/var/log/radius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_expr
  # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr
  expr {
      safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_files
  # Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files
  files {
      filename = "/usr/local/etc/raddb/mods-config/files/authorize"
      acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting"
      preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
  preprocess {
      huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups"
      hints = "/usr/local/etc/raddb/mods-config/preprocess/hints"
      with_ascend_hack = no
      ascend_channels_per_line = 23
      with_ntdomain_hack = no
      with_specialix_jetstream_hack = no
      with_cisco_vsa_hack = no
      with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
      filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy"
      key = "%{Realm}"
      relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
      filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy"
      key = "%{Realm}"
      relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
      filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject"
      key = "%{User-Name}"
      relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
      filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge"
      key = "%{User-Name}"
      relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
      filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response"
      key = "%{User-Name}"
      relaxed = no
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
  mschap {
      use_mppe = yes
      require_encryption = no
      require_strong = no
      with_ntdomain_hack = yes
   passchange {
   }
      allow_retry = yes
      winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_date
  # Loading module "date" from file /usr/local/etc/raddb/mods-enabled/date
  date {
      format = "%b %e %Y %H:%M:%S %Z"
      utc = no
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
  # Loaded module rlm_exec
  # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec
  exec {
      wait = no
      input_pairs = "request"
      shell_escape = yes
      timeout = 10
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
      filename = "/etc/passwd"
      format = "*User-Name:Crypt-Password:"
      delimiter = ":"
      ignore_nislike = no
      ignore_empty = yes
      allow_multiple_keys = no
      hash_size = 100
  }
  # Loading module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp
  radutmp {
      filename = "/usr/local/var/log/radius/radutmp"
      username = "%{User-Name}"
      case_sensitive = yes
      check_with_nas = yes
      permissions = 384
      caller_id = yes
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /usr/local/etc/raddb/mods-enabled/always
  always reject {
      rcode = "reject"
      simulcount = 0
      mpp = no
  }
  # Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always
  always fail {
      rcode = "fail"
      simulcount = 0
      mpp = no
  }
  # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always
  always ok {
      rcode = "ok"
      simulcount = 0
      mpp = no
  }
  # Loading module "handled" from file /usr/local/etc/raddb/mods-enabled/always
  always handled {
      rcode = "handled"
      simulcount = 0
      mpp = no
  }
  # Loading module "invalid" from file /usr/local/etc/raddb/mods-enabled/always
  always invalid {
      rcode = "invalid"
      simulcount = 0
      mpp = no
  }
  # Loading module "userlock" from file /usr/local/etc/raddb/mods-enabled/always
  always userlock {
      rcode = "userlock"
      simulcount = 0
      mpp = no
  }
  # Loading module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
  always notfound {
      rcode = "notfound"
      simulcount = 0
      mpp = no
  }
  # Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always
  always noop {
      rcode = "noop"
      simulcount = 0
      mpp = no
  }
  # Loading module "updated" from file /usr/local/etc/raddb/mods-enabled/always
  always updated {
      rcode = "updated"
      simulcount = 0
      mpp = no
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
  realm IPASS {
      format = "prefix"
      delimiter = "/"
      ignore_default = no
      ignore_null = no
  }
  # Loading module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
  realm suffix {
      format = "suffix"
      delimiter = "@"
      ignore_default = no
      ignore_null = no
  }
  # Loading module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
  realm realmpercent {
      format = "suffix"
      delimiter = "%"
      ignore_default = no
      ignore_null = no
  }
  # Loading module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
  realm ntdomain {
      format = "prefix"
      delimiter = "\\"
      ignore_default = no
      ignore_null = no
  }
  # Loaded module rlm_eap
  # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
  eap {
      default_eap_type = "md5"
      timer_expire = 60
      ignore_unknown_eap_types = no
      cisco_accounting_username_bug = no
      max_sessions = 16384
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
      driver = "rlm_cache_rbtree"
      key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
      ttl = 15
      max_entries = 0
      epoch = 0
      add_stats = no
  }
  # Loading module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
      wait = yes
      program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
      shell_escape = yes
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
  logintime {
      minimum_timeout = 60
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
  pap {
      normalise = yes
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
  linelog {
      filename = "/usr/local/var/log/radius/linelog"
      escape_filenames = no
      syslog_severity = "info"
      permissions = 384
      format = "This is a log message for %{User-Name}"
      reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog
  linelog log_accounting {
      filename = "/usr/local/var/log/radius/linelog-accounting"
      escape_filenames = no
      syslog_severity = "info"
      permissions = 384
      format = ""
      reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack
  # Loaded module rlm_soh
  # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh
  soh {
      dhcp = yes
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate
  # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo
  exec echo {
      wait = yes
      program = "/bin/echo %{User-Name}"
      input_pairs = "request"
      output_pairs = "reply"
      shell_escape = yes
  }
  # Loading module "files_whitelist" from file /usr/local/etc/raddb/mods-enabled/files_whitelist
  files files_whitelist {
      filename = "/usr/local/etc/raddb/mods-config/files_whitelist/whitelist"
  }
  instantiate {
  }
  # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
  # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files
reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting
reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy
  # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints
  # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject
[/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay"     found in filter list for realm "DEFAULT".
[/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec"     found in filter list for realm "DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
  # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_pwd
   pwd {
       group = 19
       fragment_size = 1020
       server_id = "theserver@example.com"
       virtual_server = "inner-tunnel"
   }
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
       challenge = "Password: "
       auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
       tls = "tls-common"
   }
   tls-config tls-common {
       verify_depth = 0
       ca_path = "/usr/local/etc/raddb/certs"
       pem_file_type = yes
       private_key_file = "/usr/local/etc/raddb/certs/server.pem"
       certificate_file = "/usr/local/etc/raddb/certs/server.pem"
       ca_file = "/usr/local/etc/raddb/certs/ca.pem"
       private_key_password = <<< secret >>>
       dh_file = "/usr/local/etc/raddb/certs/dh"
       fragment_size = 1024
       include_length = yes
       auto_chain = yes
       check_crl = no
       check_all_crl = no
       cipher_list = "DEFAULT"
       cipher_server_preference = no
       ecdh_curve = "prime256v1"
       tls_max_version = ""
       tls_min_version = "1.0"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
    verify {
        skip_if_ocsp_ok = no
    }
    ocsp {
        enable = no
        override_cert_url = yes
        url = "http://127.0.0.1/ocsp/"
        use_nonce = yes
        timeout = 0
        softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
       tls = "tls-common"
       default_eap_type = "md5"
       copy_request_to_tunnel = no
       use_tunneled_reply = no
       virtual_server = "inner-tunnel"
       include_length = yes
       require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
       tls = "tls-common"
       default_eap_type = "mschapv2"
       copy_request_to_tunnel = no
       use_tunneled_reply = no
       proxy_tunneled_request_as_eap = yes
       virtual_server = "inner-tunnel"
       soh = no
       require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
       with_ntdomain_hack = no
       send_error = no
   }
  # Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
  # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
  # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog
  # Instantiating module "files_whitelist" from file /usr/local/etc/raddb/mods-enabled/files_whitelist
reading pairlist file /usr/local/etc/raddb/mods-config/files_whitelist/whitelist
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
} # server
server default { # from file /usr/local/etc/raddb/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' -- /usr/local/etc/raddb/sites-enabled/inner-tunnel:332
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
      type = "auth"
      ipaddr = *
      port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
listen {
      type = "acct"
      ipaddr = *
      port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
listen {
      type = "auth"
      ipv6addr = ::
      port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
listen {
      type = "acct"
      ipv6addr = ::
      port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
listen {
      type = "auth"
      ipaddr = 127.0.0.1
      port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 42136
Listening on proxy address :: port 33890
Ready to process requests
(0) Received Access-Request Id 0 from 127.0.0.1:40230 to 127.0.0.1:1812 length 132
(0)   User-Name = "anonymous"
(0)   NAS-IP-Address = 127.0.0.1
(0)   Calling-Station-Id = "02-00-00-00-00-01"
(0)   Framed-MTU = 1400
(0)   NAS-Port-Type = Wireless-802.11
(0)   Service-Type = Framed-User
(0)   Connect-Info = "CONNECT 11Mbps 802.11b"
(0)   EAP-Message = 0x0200000e01616e6f6e796d6f7573
(0)   Message-Authenticator = 0x58014fe1322620e597f0770a570418f7
(0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 0 length 14
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 1 length 22
(0) eap: EAP session adding &reply:State = 0x24777c502476782c
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:40230 length 0
(0)   EAP-Message = 0x010100160410a5863c91d1344a06ab5b9bb8eaf3ba2f
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0x24777c502476782cd8b4522ec21dc968
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 1 from 127.0.0.1:40230 to 127.0.0.1:1812 length 142
(1)   User-Name = "anonymous"
(1)   NAS-IP-Address = 127.0.0.1
(1)   Calling-Station-Id = "02-00-00-00-00-01"
(1)   Framed-MTU = 1400
(1)   NAS-Port-Type = Wireless-802.11
(1)   Service-Type = Framed-User
(1)   Connect-Info = "CONNECT 11Mbps 802.11b"
(1)   EAP-Message = 0x020100060315
(1)   State = 0x24777c502476782cd8b4522ec21dc968
(1)   Message-Authenticator = 0x452e316c7f4dfa36ecc1eeb3e5c9c3b5
(1) session-state: No cached attributes
(1) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 1 length 6
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1)     [eap] = updated
(1)     [files] = noop
(1) files_whitelist: users: Matched entry DEFAULT at line 89
(1)     [files_whitelist] = ok
(1)     [expiration] = noop
(1)     [logintime] = noop
(1) pap: WARNING: Auth-Type already set.  Not setting to PAP
(1)     [pap] = noop
(1)   } # authorize = updated
(1) Found Auth-Type = Reject
(1) Auth-Type = Reject, rejecting user
(1) Failed to authenticate the user
(1) Using Post-Auth-Type Reject
(1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(1)   Post-Auth-Type REJECT {
(1) attr_filter.access_reject: EXPAND %{User-Name}
(1) attr_filter.access_reject:    --> anonymous
(1) attr_filter.access_reject: Matched entry DEFAULT at line 11
(1)     [attr_filter.access_reject] = updated
(1) eap: Expiring EAP session with state 0x24777c502476782c
(1) eap: Finished EAP session with state 0x24777c502476782c
(1) eap: Previous EAP request found for state 0x24777c502476782c, released from the list
(1) eap: Request was previously rejected, inserting EAP-Failure
(1) eap: Sending EAP Failure (code 4) ID 1 length 4
(1)     [eap] = updated
(1)     policy remove_reply_message_if_eap {
(1)       if (&reply:EAP-Message && &reply:Reply-Message) {
(1)       if (&reply:EAP-Message && &reply:Reply-Message)  -> TRUE
(1)       if (&reply:EAP-Message && &reply:Reply-Message)  {
(1)         update reply {
(1)           &Reply-Message !* ANY
(1)         } # update reply = noop
(1)       } # if (&reply:EAP-Message && &reply:Reply-Message)  = noop
(1)       ... skipping else: Preceding "if" was taken
(1)     } # policy remove_reply_message_if_eap = noop
(1)   } # Post-Auth-Type REJECT = updated
(1) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(1) Sending delayed response
(1) Sent Access-Reject Id 1 from 127.0.0.1:1812 to 127.0.0.1:40230 length 44
(1)   EAP-Message = 0x04010004
(1)   Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.9 seconds.
(0) Cleaning up request packet ID 0 with timestamp +23
(1) Cleaning up request packet ID 1 with timestamp +23
Ready to process requests
(2) Received Access-Request Id 0 from 127.0.0.1:34655 to 127.0.0.1:1812 length 132
(2)   User-Name = "anonymous"
(2)   NAS-IP-Address = 127.0.0.1
(2)   Calling-Station-Id = "02-00-00-00-00-01"
(2)   Framed-MTU = 1400
(2)   NAS-Port-Type = Wireless-802.11
(2)   Service-Type = Framed-User
(2)   Connect-Info = "CONNECT 11Mbps 802.11b"
(2)   EAP-Message = 0x0200000e01616e6f6e796d6f7573
(2)   Message-Authenticator = 0xcb7b113ddf5cdc850f6f065fb1042998
(2) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 0 length 14
(2) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(2)   authenticate {
(2) eap: Peer sent packet with method EAP Identity (1)
(2) eap: Calling submodule eap_md5 to process data
(2) eap_md5: Issuing MD5 Challenge
(2) eap: Sending EAP Request (code 1) ID 1 length 22
(2) eap: EAP session adding &reply:State = 0xfb468ffdfb478b72
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:34655 length 0
(2)   EAP-Message = 0x0101001604103d49726f11ca7f1ee00540221e9c5614
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0xfb468ffdfb478b72b46fd038661bd219
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 1 from 127.0.0.1:34655 to 127.0.0.1:1812 length 142
(3)   User-Name = "anonymous"
(3)   NAS-IP-Address = 127.0.0.1
(3)   Calling-Station-Id = "02-00-00-00-00-01"
(3)   Framed-MTU = 1400
(3)   NAS-Port-Type = Wireless-802.11
(3)   Service-Type = Framed-User
(3)   Connect-Info = "CONNECT 11Mbps 802.11b"
(3)   EAP-Message = 0x020100060315
(3)   State = 0xfb468ffdfb478b72b46fd038661bd219
(3)   Message-Authenticator = 0xebce674d683f033c22da2728ff2154db
(3) session-state: No cached attributes
(3) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 1 length 6
(3) eap: No EAP Start, assuming it's an on-going EAP conversation
(3)     [eap] = updated
(3)     [files] = noop
(3) files_whitelist: users: Matched entry DEFAULT at line 89
(3)     [files_whitelist] = ok
(3)     [expiration] = noop
(3)     [logintime] = noop
(3) pap: WARNING: Auth-Type already set.  Not setting to PAP
(3)     [pap] = noop
(3)   } # authorize = updated
(3) Found Auth-Type = Reject
(3) Auth-Type = Reject, rejecting user
(3) Failed to authenticate the user
(3) Using Post-Auth-Type Reject
(3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(3)   Post-Auth-Type REJECT {
(3) attr_filter.access_reject: EXPAND %{User-Name}
(3) attr_filter.access_reject:    --> anonymous
(3) attr_filter.access_reject: Matched entry DEFAULT at line 11
(3)     [attr_filter.access_reject] = updated
(3) eap: Expiring EAP session with state 0xfb468ffdfb478b72
(3) eap: Finished EAP session with state 0xfb468ffdfb478b72
(3) eap: Previous EAP request found for state 0xfb468ffdfb478b72, released from the list
(3) eap: Request was previously rejected, inserting EAP-Failure
(3) eap: Sending EAP Failure (code 4) ID 1 length 4
(3)     [eap] = updated
(3)     policy remove_reply_message_if_eap {
(3)       if (&reply:EAP-Message && &reply:Reply-Message) {
(3)       if (&reply:EAP-Message && &reply:Reply-Message)  -> TRUE
(3)       if (&reply:EAP-Message && &reply:Reply-Message)  {
(3)         update reply {
(3)           &Reply-Message !* ANY
(3)         } # update reply = noop
(3)       } # if (&reply:EAP-Message && &reply:Reply-Message)  = noop
(3)       ... skipping else: Preceding "if" was taken
(3)     } # policy remove_reply_message_if_eap = noop
(3)   } # Post-Auth-Type REJECT = updated
(3) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(3) Sending delayed response
(3) Sent Access-Reject Id 1 from 127.0.0.1:1812 to 127.0.0.1:34655 length 44
(3)   EAP-Message = 0x04010004
(3)   Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.9 seconds.
(2) Cleaning up request packet ID 0 with timestamp +103
(3) Cleaning up request packet ID 1 with timestamp +103
Ready to process requests
(4) Received Access-Request Id 0 from 127.0.0.1:32835 to 127.0.0.1:1812 length 120
(4)   User-Name = "bob"
(4)   NAS-IP-Address = 127.0.0.1
(4)   Calling-Station-Id = "02-00-00-00-00-01"
(4)   Framed-MTU = 1400
(4)   NAS-Port-Type = Wireless-802.11
(4)   Service-Type = Framed-User
(4)   Connect-Info = "CONNECT 11Mbps 802.11b"
(4)   EAP-Message = 0x0200000801626f62
(4)   Message-Authenticator = 0x437f8897606b2611aee7efdca3750c34
(4) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "bob", looking up realm NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 0 length 8
(4) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(4)   authenticate {
(4) eap: Peer sent packet with method EAP Identity (1)
(4) eap: Calling submodule eap_md5 to process data
(4) eap_md5: Issuing MD5 Challenge
(4) eap: Sending EAP Request (code 1) ID 1 length 22
(4) eap: EAP session adding &reply:State = 0xbca001aabca1058c
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(4)   Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:32835 length 0
(4)   EAP-Message = 0x01010016041040915ea8b42f19d7923c748a6de4be4d
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0xbca001aabca1058cd93e9f3cb1c945ed
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 1 from 127.0.0.1:32835 to 127.0.0.1:1812 length 136
(5)   User-Name = "bob"
(5)   NAS-IP-Address = 127.0.0.1
(5)   Calling-Station-Id = "02-00-00-00-00-01"
(5)   Framed-MTU = 1400
(5)   NAS-Port-Type = Wireless-802.11
(5)   Service-Type = Framed-User
(5)   Connect-Info = "CONNECT 11Mbps 802.11b"
(5)   EAP-Message = 0x020100060334
(5)   State = 0xbca001aabca1058cd93e9f3cb1c945ed
(5)   Message-Authenticator = 0x6f0fd26f81c6724313e9810f0f9decc4
(5) session-state: No cached attributes
(5) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "bob", looking up realm NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 1 length 6
(5) eap: No EAP Start, assuming it's an on-going EAP conversation
(5)     [eap] = updated
(5) files: users: Matched entry bob at line 87
(5) files: EXPAND Hello, %{User-Name}
(5) files:    --> Hello, bob
(5)     [files] = ok
(5) files_whitelist: users: Matched entry bob at line 87
(5) files_whitelist: EXPAND Hello, %{User-Name}
(5) files_whitelist:    --> Hello, bob
(5)     [files_whitelist] = ok
(5)     [expiration] = noop
(5)     [logintime] = noop
(5) pap: WARNING: Auth-Type already set.  Not setting to PAP
(5)     [pap] = noop
(5)   } # authorize = updated
(5) Found Auth-Type = eap
(5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0xbca001aabca1058c
(5) eap: Finished EAP session with state 0xbca001aabca1058c
(5) eap: Previous EAP request found for state 0xbca001aabca1058c, released from the list
(5) eap: Peer sent packet with method EAP NAK (3)
(5) eap: Found mutually acceptable type PWD (52)
(5) eap: Calling submodule eap_pwd to process data
(5) eap: Sending EAP Request (code 1) ID 2 length 36
(5) eap: EAP session adding &reply:State = 0xbca001aabda2358c
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(5)   Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 1 from 127.0.0.1:1812 to 127.0.0.1:32835 length 0
(5)   Reply-Message = "Hello, bob"
(5)   EAP-Message = 0x0102002434010013010119fce9a800746865736572766572406578616d706c652e636f6d
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0xbca001aabda2358cd93e9f3cb1c945ed
(5) Finished request
Waking up in 4.9 seconds.
(6) Received Access-Request Id 2 from 127.0.0.1:32835 to 127.0.0.1:1812 length 148
(6)   User-Name = "bob"
(6)   NAS-IP-Address = 127.0.0.1
(6)   Calling-Station-Id = "02-00-00-00-00-01"
(6)   Framed-MTU = 1400
(6)   NAS-Port-Type = Wireless-802.11
(6)   Service-Type = Framed-User
(6)   Connect-Info = "CONNECT 11Mbps 802.11b"
(6)   EAP-Message = 0x0202001234010013010119fce9a800626f62
(6)   State = 0xbca001aabda2358cd93e9f3cb1c945ed
(6)   Message-Authenticator = 0x6b74dccf75231c2a7b140a136bd9f253
(6) session-state: No cached attributes
(6) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(6)   authorize {
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = notfound
(6)     } # policy filter_username = notfound
(6)     [preprocess] = ok
(6)     [chap] = noop
(6)     [mschap] = noop
(6)     [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "bob", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)     [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 2 length 18
(6) eap: No EAP Start, assuming it's an on-going EAP conversation
(6)     [eap] = updated
(6) files: users: Matched entry bob at line 87
(6) files: EXPAND Hello, %{User-Name}
(6) files:    --> Hello, bob
(6)     [files] = ok
(6) files_whitelist: users: Matched entry bob at line 87
(6) files_whitelist: EXPAND Hello, %{User-Name}
(6) files_whitelist:    --> Hello, bob
(6)     [files_whitelist] = ok
(6)     [expiration] = noop
(6)     [logintime] = noop
(6) pap: WARNING: Auth-Type already set.  Not setting to PAP
(6)     [pap] = noop
(6)   } # authorize = updated
(6) Found Auth-Type = eap
(6) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(6)   authenticate {
(6) eap: Expiring EAP session with state 0xbca001aabda2358c
(6) eap: Finished EAP session with state 0xbca001aabda2358c
(6) eap: Previous EAP request found for state 0xbca001aabda2358c, released from the list
(6) eap: Peer sent packet with method EAP PWD (52)
(6) eap: Calling submodule eap_pwd to process data
(6) eap_pwd: Sending tunneled request
(6) eap_pwd:   User-Name = "bob"
(6) eap_pwd: server inner-tunnel {
(6) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/inner-tunnel
(6)   authorize {
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = notfound
(6)     } # policy filter_username = notfound
(6)     [chap] = noop
(6)     [mschap] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "bob", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)     [suffix] = noop
(6)     update control {
(6)       &Proxy-To-Realm := LOCAL
(6)     } # update control = noop
(6) eap: No EAP-Message, not doing EAP
(6)     [eap] = noop
(6) files: users: Matched entry bob at line 87
(6) files: EXPAND Hello, %{User-Name}
(6) files:    --> Hello, bob
(6)     [files] = ok
(6) files_whitelist: users: Matched entry bob at line 87
(6) files_whitelist: EXPAND Hello, %{User-Name}
(6) files_whitelist:    --> Hello, bob
(6)     [files_whitelist] = ok
(6)     [expiration] = noop
(6)     [logintime] = noop
(6) pap: No User-Password attribute in the request.  Cannot do PAP
(6)     [pap] = noop
(6)   } # authorize = ok
(6) eap_pwd: } # server inner-tunnel
(6) eap_pwd: Got tunneled reply code 0
(6) eap_pwd:   Reply-Message = "Hello, bob"
(6) eap: Sending EAP Request (code 1) ID 3 length 102
(6) eap: EAP session adding &reply:State = 0xbca001aabea3358c
(6)     [eap] = handled
(6)   } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(6)   Challenge { ... } # empty sub-section is ignored
(6) Sent Access-Challenge Id 2 from 127.0.0.1:1812 to 127.0.0.1:32835 length 0
(6)   Reply-Message = "Hello, bob"
(6)   EAP-Message = 0x0103006634028ec29559fc18e8e5fba5b1ca7c53ce842611f44f250e80381b7be7745fdbbe2ebdf8dc763a42d8f1e42dd6534c5871b148db377d4064712caa4065b7dc60f51f835b094fa734573e016afe092c070548911a9a79ee41e7d32fc04076e0857342
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0xbca001aabea3358cd93e9f3cb1c945ed
(6) Finished request
Waking up in 4.9 seconds.
(7) Received Access-Request Id 3 from 127.0.0.1:32835 to 127.0.0.1:1812 length 232
(7)   User-Name = "bob"
(7)   NAS-IP-Address = 127.0.0.1
(7)   Calling-Station-Id = "02-00-00-00-00-01"
(7)   Framed-MTU = 1400
(7)   NAS-Port-Type = Wireless-802.11
(7)   Service-Type = Framed-User
(7)   Connect-Info = "CONNECT 11Mbps 802.11b"
(7)   EAP-Message = 0x02030066340286b2eaebafe2a3ecafcdceebb79de270a92f94a9565a1797bb899efa39f115b27b19a5744757340e74d4f9acbd5fc278f199e09f02174cad3276fa5af7b1b5c9d9763d07e95b6e30c81a8b6c4f1b869be2a16cb8a704b4d2034c746e48c9b916
(7)   State = 0xbca001aabea3358cd93e9f3cb1c945ed
(7)   Message-Authenticator = 0x975470816e41cb11665cb2e9591dd400
(7) session-state: No cached attributes
(7) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(7)   authorize {
(7)     policy filter_username {
(7)       if (&User-Name) {
(7)       if (&User-Name)  -> TRUE
(7)       if (&User-Name)  {
(7)         if (&User-Name =~ / /) {
(7)         if (&User-Name =~ / /)  -> FALSE
(7)         if (&User-Name =~ /@[^@]*@/ ) {
(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)         if (&User-Name =~ /\.\./ ) {
(7)         if (&User-Name =~ /\.\./ )  -> FALSE
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(7)         if (&User-Name =~ /\.$/)  {
(7)         if (&User-Name =~ /\.$/)   -> FALSE
(7)         if (&User-Name =~ /@\./)  {
(7)         if (&User-Name =~ /@\./)   -> FALSE
(7)       } # if (&User-Name)  = notfound
(7)     } # policy filter_username = notfound
(7)     [preprocess] = ok
(7)     [chap] = noop
(7)     [mschap] = noop
(7)     [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "bob", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)     [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 3 length 102
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7)     [eap] = updated
(7) files: users: Matched entry bob at line 87
(7) files: EXPAND Hello, %{User-Name}
(7) files:    --> Hello, bob
(7)     [files] = ok
(7) files_whitelist: users: Matched entry bob at line 87
(7) files_whitelist: EXPAND Hello, %{User-Name}
(7) files_whitelist:    --> Hello, bob
(7)     [files_whitelist] = ok
(7)     [expiration] = noop
(7)     [logintime] = noop
(7) pap: WARNING: Auth-Type already set.  Not setting to PAP
(7)     [pap] = noop
(7)   } # authorize = updated
(7) Found Auth-Type = eap
(7) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(7)   authenticate {
(7) eap: Expiring EAP session with state 0xbca001aabea3358c
(7) eap: Finished EAP session with state 0xbca001aabea3358c
(7) eap: Previous EAP request found for state 0xbca001aabea3358c, released from the list
(7) eap: Peer sent packet with method EAP PWD (52)
(7) eap: Calling submodule eap_pwd to process data
(7) eap: Sending EAP Request (code 1) ID 4 length 38
(7) eap: EAP session adding &reply:State = 0xbca001aabfa4358c
(7)     [eap] = handled
(7)   } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(7)   Challenge { ... } # empty sub-section is ignored
(7) Sent Access-Challenge Id 3 from 127.0.0.1:1812 to 127.0.0.1:32835 length 0
(7)   Reply-Message = "Hello, bob"
(7)   EAP-Message = 0x010400263403a4b27ab89faf4f93dd8870d61eb856692d764d794f85094fd8e86410e206184c
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0xbca001aabfa4358cd93e9f3cb1c945ed
(7) Finished request
Waking up in 4.9 seconds.
(8) Received Access-Request Id 4 from 127.0.0.1:32835 to 127.0.0.1:1812 length 168
(8)   User-Name = "bob"
(8)   NAS-IP-Address = 127.0.0.1
(8)   Calling-Station-Id = "02-00-00-00-00-01"
(8)   Framed-MTU = 1400
(8)   NAS-Port-Type = Wireless-802.11
(8)   Service-Type = Framed-User
(8)   Connect-Info = "CONNECT 11Mbps 802.11b"
(8)   EAP-Message = 0x0204002634037c12b6a1659eb7bb6ffe17023410b5788cbeb8dac3a6fff05cced588c45247bc
(8)   State = 0xbca001aabfa4358cd93e9f3cb1c945ed
(8)   Message-Authenticator = 0x2b451021e60e1a436f796a2072f44dd6
(8) session-state: No cached attributes
(8) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(8)   authorize {
(8)     policy filter_username {
(8)       if (&User-Name) {
(8)       if (&User-Name)  -> TRUE
(8)       if (&User-Name)  {
(8)         if (&User-Name =~ / /) {
(8)         if (&User-Name =~ / /)  -> FALSE
(8)         if (&User-Name =~ /@[^@]*@/ ) {
(8)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)         if (&User-Name =~ /\.\./ ) {
(8)         if (&User-Name =~ /\.\./ )  -> FALSE
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(8)         if (&User-Name =~ /\.$/)  {
(8)         if (&User-Name =~ /\.$/)   -> FALSE
(8)         if (&User-Name =~ /@\./)  {
(8)         if (&User-Name =~ /@\./)   -> FALSE
(8)       } # if (&User-Name)  = notfound
(8)     } # policy filter_username = notfound
(8)     [preprocess] = ok
(8)     [chap] = noop
(8)     [mschap] = noop
(8)     [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "bob", looking up realm NULL
(8) suffix: No such realm "NULL"
(8)     [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 4 length 38
(8) eap: No EAP Start, assuming it's an on-going EAP conversation
(8)     [eap] = updated
(8) files: users: Matched entry bob at line 87
(8) files: EXPAND Hello, %{User-Name}
(8) files:    --> Hello, bob
(8)     [files] = ok
(8) files_whitelist: users: Matched entry bob at line 87
(8) files_whitelist: EXPAND Hello, %{User-Name}
(8) files_whitelist:    --> Hello, bob
(8)     [files_whitelist] = ok
(8)     [expiration] = noop
(8)     [logintime] = noop
(8) pap: WARNING: Auth-Type already set.  Not setting to PAP
(8)     [pap] = noop
(8)   } # authorize = updated
(8) Found Auth-Type = eap
(8) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(8)   authenticate {
(8) eap: Expiring EAP session with state 0xbca001aabfa4358c
(8) eap: Finished EAP session with state 0xbca001aabfa4358c
(8) eap: Previous EAP request found for state 0xbca001aabfa4358c, released from the list
(8) eap: Peer sent packet with method EAP PWD (52)
(8) eap: Calling submodule eap_pwd to process data
(8) eap: Sending EAP Success (code 3) ID 4 length 4
(8) eap: Freeing handler
(8)     [eap] = ok
(8)   } # authenticate = ok
(8) # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/default
(8)   post-auth {
(8)     update {
(8)       No attributes updated
(8)     } # update = noop
(8)     [exec] = noop
(8)     policy remove_reply_message_if_eap {
(8)       if (&reply:EAP-Message && &reply:Reply-Message) {
(8)       if (&reply:EAP-Message && &reply:Reply-Message)  -> TRUE
(8)       if (&reply:EAP-Message && &reply:Reply-Message)  {
(8)         update reply {
(8)           &Reply-Message !* ANY
(8)         } # update reply = noop
(8)       } # if (&reply:EAP-Message && &reply:Reply-Message)  = noop
(8)       ... skipping else: Preceding "if" was taken
(8)     } # policy remove_reply_message_if_eap = noop
(8)   } # post-auth = noop
(8) Sent Access-Accept Id 4 from 127.0.0.1:1812 to 127.0.0.1:32835 length 0
(8)   MS-MPPE-Recv-Key = 0x7dbf6ce40ed2205c2ab292002359326110b3e985b933a9297bcc13060d1d83e7
(8)   MS-MPPE-Send-Key = 0x5d5a2de539a1cefe7c3df55837a3681672414e1517c8a240582c2e9521166ffc
(8)   EAP-Message = 0x03040004
(8)   Message-Authenticator = 0x00000000000000000000000000000000
(8)   User-Name = "bob"
(8) Finished request
Waking up in 4.9 seconds.
(4) Cleaning up request packet ID 0 with timestamp +136
(5) Cleaning up request packet ID 1 with timestamp +136
(6) Cleaning up request packet ID 2 with timestamp +136
(7) Cleaning up request packet ID 3 with timestamp +136
(8) Cleaning up request packet ID 4 with timestamp +136
Ready to process requests
(9) Received Access-Request Id 0 from 127.0.0.1:33785 to 127.0.0.1:1812 length 122
(9)   User-Name = "bob2"
(9)   NAS-IP-Address = 127.0.0.1
(9)   Calling-Station-Id = "02-00-00-00-00-01"
(9)   Framed-MTU = 1400
(9)   NAS-Port-Type = Wireless-802.11
(9)   Service-Type = Framed-User
(9)   Connect-Info = "CONNECT 11Mbps 802.11b"
(9)   EAP-Message = 0x0200000901626f6232
(9)   Message-Authenticator = 0x1b66679db7c33d0538c571a46c34c548
(9) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(9)   authorize {
(9)     policy filter_username {
(9)       if (&User-Name) {
(9)       if (&User-Name)  -> TRUE
(9)       if (&User-Name)  {
(9)         if (&User-Name =~ / /) {
(9)         if (&User-Name =~ / /)  -> FALSE
(9)         if (&User-Name =~ /@[^@]*@/ ) {
(9)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(9)         if (&User-Name =~ /\.\./ ) {
(9)         if (&User-Name =~ /\.\./ )  -> FALSE
(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(9)         if (&User-Name =~ /\.$/)  {
(9)         if (&User-Name =~ /\.$/)   -> FALSE
(9)         if (&User-Name =~ /@\./)  {
(9)         if (&User-Name =~ /@\./)   -> FALSE
(9)       } # if (&User-Name)  = notfound
(9)     } # policy filter_username = notfound
(9)     [preprocess] = ok
(9)     [chap] = noop
(9)     [mschap] = noop
(9)     [digest] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "bob2", looking up realm NULL
(9) suffix: No such realm "NULL"
(9)     [suffix] = noop
(9) eap: Peer sent EAP Response (code 2) ID 0 length 9
(9) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(9)     [eap] = ok
(9)   } # authorize = ok
(9) Found Auth-Type = eap
(9) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(9)   authenticate {
(9) eap: Peer sent packet with method EAP Identity (1)
(9) eap: Calling submodule eap_md5 to process data
(9) eap_md5: Issuing MD5 Challenge
(9) eap: Sending EAP Request (code 1) ID 1 length 22
(9) eap: EAP session adding &reply:State = 0x512c9c3a512d98f8
(9)     [eap] = handled
(9)   } # authenticate = handled
(9) Using Post-Auth-Type Challenge
(9) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(9)   Challenge { ... } # empty sub-section is ignored
(9) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:33785 length 0
(9)   EAP-Message = 0x01010016041056dc5e8c153f21791658f29434a035c1
(9)   Message-Authenticator = 0x00000000000000000000000000000000
(9)   State = 0x512c9c3a512d98f837f85b7de328d888
(9) Finished request
Waking up in 4.9 seconds.
(10) Received Access-Request Id 1 from 127.0.0.1:33785 to 127.0.0.1:1812 length 137
(10)   User-Name = "bob2"
(10)   NAS-IP-Address = 127.0.0.1
(10)   Calling-Station-Id = "02-00-00-00-00-01"
(10)   Framed-MTU = 1400
(10)   NAS-Port-Type = Wireless-802.11
(10)   Service-Type = Framed-User
(10)   Connect-Info = "CONNECT 11Mbps 802.11b"
(10)   EAP-Message = 0x020100060334
(10)   State = 0x512c9c3a512d98f837f85b7de328d888
(10)   Message-Authenticator = 0x80ab9f7646067497b39302c24e95d9a2
(10) session-state: No cached attributes
(10) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(10)   authorize {
(10)     policy filter_username {
(10)       if (&User-Name) {
(10)       if (&User-Name)  -> TRUE
(10)       if (&User-Name)  {
(10)         if (&User-Name =~ / /) {
(10)         if (&User-Name =~ / /)  -> FALSE
(10)         if (&User-Name =~ /@[^@]*@/ ) {
(10)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(10)         if (&User-Name =~ /\.\./ ) {
(10)         if (&User-Name =~ /\.\./ )  -> FALSE
(10)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(10)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(10)         if (&User-Name =~ /\.$/)  {
(10)         if (&User-Name =~ /\.$/)   -> FALSE
(10)         if (&User-Name =~ /@\./)  {
(10)         if (&User-Name =~ /@\./)   -> FALSE
(10)       } # if (&User-Name)  = notfound
(10)     } # policy filter_username = notfound
(10)     [preprocess] = ok
(10)     [chap] = noop
(10)     [mschap] = noop
(10)     [digest] = noop
(10) suffix: Checking for suffix after "@"
(10) suffix: No '@' in User-Name = "bob2", looking up realm NULL
(10) suffix: No such realm "NULL"
(10)     [suffix] = noop
(10) eap: Peer sent EAP Response (code 2) ID 1 length 6
(10) eap: No EAP Start, assuming it's an on-going EAP conversation
(10)     [eap] = updated
(10) files: users: Matched entry bob2 at line 89
(10) files: EXPAND Hello, %{User-Name}
(10) files:    --> Hello, bob2
(10)     [files] = ok
(10) files_whitelist: users: Matched entry DEFAULT at line 89
(10)     [files_whitelist] = ok
(10)     [expiration] = noop
(10)     [logintime] = noop
(10) pap: WARNING: Auth-Type already set.  Not setting to PAP
(10)     [pap] = noop
(10)   } # authorize = updated
(10) Found Auth-Type = Reject
(10) Auth-Type = Reject, rejecting user
(10) Failed to authenticate the user
(10) Using Post-Auth-Type Reject
(10) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(10)   Post-Auth-Type REJECT {
(10) attr_filter.access_reject: EXPAND %{User-Name}
(10) attr_filter.access_reject:    --> bob2
(10) attr_filter.access_reject: Matched entry DEFAULT at line 11
(10)     [attr_filter.access_reject] = updated
(10) eap: Expiring EAP session with state 0x512c9c3a512d98f8
(10) eap: Finished EAP session with state 0x512c9c3a512d98f8
(10) eap: Previous EAP request found for state 0x512c9c3a512d98f8, released from the list
(10) eap: Request was previously rejected, inserting EAP-Failure
(10) eap: Sending EAP Failure (code 4) ID 1 length 4
(10)     [eap] = updated
(10)     policy remove_reply_message_if_eap {
(10)       if (&reply:EAP-Message && &reply:Reply-Message) {
(10)       if (&reply:EAP-Message && &reply:Reply-Message)  -> TRUE
(10)       if (&reply:EAP-Message && &reply:Reply-Message)  {
(10)         update reply {
(10)           &Reply-Message !* ANY
(10)         } # update reply = noop
(10)       } # if (&reply:EAP-Message && &reply:Reply-Message)  = noop
(10)       ... skipping else: Preceding "if" was taken
(10)     } # policy remove_reply_message_if_eap = noop
(10)   } # Post-Auth-Type REJECT = updated
(10) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(10) Sending delayed response
(10) Sent Access-Reject Id 1 from 127.0.0.1:1812 to 127.0.0.1:33785 length 44
(10)   EAP-Message = 0x04010004
(10)   Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.9 seconds.
(9) Cleaning up request packet ID 0 with timestamp +171
(10) Cleaning up request packet ID 1 with timestamp +171
Ready to process requests

Supporting EAP-PWD with a whitelist

Richter, Jan