-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I'm using FreeRADIUS 1.1.4 compiled from sources on Debian Etch. I backend against LDAP with hashed password. Now I'm trying to configure authentication to use with WPA, but it segfaults on calling PAP: # radiusd -Xxxx 2>&1 ... rad_recv: Access-Request packet from host 192.168.1.250:3074, id=0, length=125 User-Name = "testuser" NAS-IP-Address = 192.168.1.250 Called-Station-Id = "00c0..." Calling-Station-Id = "001..." NAS-Identifier = "00c..." NAS-Port = 223 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020... Message-Authenticator = 0x431... Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modsingle[authorize]: calling preprocess (rlm_preprocess) for request 0 modsingle[authorize]: returned from preprocess (rlm_preprocess) for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modsingle[authorize]: calling chap (rlm_chap) for request 0 modsingle[authorize]: returned from chap (rlm_chap) for request 0 modcall[authorize]: module "chap" returns noop for request 0 modsingle[authorize]: calling mschap (rlm_mschap) for request 0 modsingle[authorize]: returned from mschap (rlm_mschap) for request 0 modcall[authorize]: module "mschap" returns noop for request 0 modsingle[authorize]: calling suffix (rlm_realm) for request 0 rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL rlm_realm: No such realm "NULL" modsingle[authorize]: returned from suffix (rlm_realm) for request 0 modcall[authorize]: module "suffix" returns noop for request 0 modsingle[authorize]: calling eap (rlm_eap) for request 0 rlm_eap: EAP packet type response id 1 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modsingle[authorize]: returned from eap (rlm_eap) for request 0 modcall[authorize]: module "eap" returns updated for request 0 modsingle[authorize]: calling files (rlm_files) for request 0 users: Matched entry DEFAULT at line 152 modsingle[authorize]: returned from files (rlm_files) for request 0 modcall[authorize]: module "files" returns ok for request 0 modsingle[authorize]: calling ldap (rlm_ldap) for request 0 rlm_ldap: - authorize rlm_ldap: performing user authorization for testuser radius_xlat: '(uid=testuser)' radius_xlat: 'dc=aldu,dc=net' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to ldap.laurelin.aldu.net:389, authentication 0 rlm_ldap: bind as cn=radius,dc=aldu,dc=net/PASSWORD to ldap.laurelin.aldu.net:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in dc=aldu,dc=net, with filter (uid=testuser) rlm_ldap: checking if remote access for testuser is allowed by dialupAccess rlm_ldap: looking for check items in directory... rlm_ldap: Adding userPassword as User-Password, value {md5}rL0Y20zC+Fzt72VPzMSk2A== & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user testuser authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modsingle[authorize]: returned from ldap (rlm_ldap) for request 0 modcall[authorize]: module "ldap" returns ok for request 0 modsingle[authorize]: calling pap (rlm_pap) for request 0 Segmentation fault Some configuration snippets (maybe not useful, but the entire file would have been too long I guess): radiusd.conf: ... modules { .. pap { auto_header = yes } ... } ... authorize { ... ldap pap } authenticate { Auth-Type PAP { pap } ... } ... If I revert the password to clear-text on LDAP, it runs fine and authenticate. Any ideas? Thank you, Giovanni Lovato - -- www.aldu.net/~heruan giovanni.lovato@aldu.net ldaps://pgpkeys.aldu.net -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQFFygRYaWLXrn9dopwRAjqCAJ9S0ztPnbdnFh4rR5UDkUt25Ix8lACfbBAf 7FY2dwyMEGVi8LTkvuIvhNs= =HQjo -----END PGP SIGNATURE-----