Hello, Thanks for looking at this. I have attached 2 debug outputs, 1- using domain@user with TTLS & MSCHAPV2 (not EAP-MSCHAPV2) - does not work 2- using domain@user with TTLS & EAP-MSCHAPV2 - does work SO the issues is that when the username contains a suffix, using MSCHAPV2 (as opposed to EAP-MSCHAPV2) I get rejected. If using EAP-MSCHAPV2, it works fine. When using EAP-MSCHAPV2 the CHAP challenge and response messages are inside the EAP message, when using MSCHAPV2, the Chap messages are separate attributes within the inner tunnel. I.E: [ttls] Got tunneled request User-Name = "josef@testdomain.com" MS-CHAP-Challenge = 0x1bd3c8b9d05f712d166a28dc85032e3d MS-CHAP2-Response = 0xeb00e4aa1d015b333de96b68fa7258f868270000000000000000777975f5b969b39b08978f3ec81d1dd949960dde0f65af72 So this is 1- using domain@user with TTLS & MSCHAPV2 (not EAP-MSCHAPV2) - does not work: radiusd: FreeRADIUS Version 2.2.5, for host x86_64-redhat-linux-gnu, built on Apr 29 2014 at 09:18:14 Copyright (C) 1999-2013 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License. For more information about these matters, see the file named COPYRIGHT. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/opendirectory including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/replicate including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/cache including configuration file /etc/raddb/modules/krb5 including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/redis including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/ldap including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/soh including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/dhcp_sqlippool including configuration file /etc/raddb/sql/mysql/ippool-dhcp.conf including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/ntlm_auth including configuration file /etc/raddb/modules/dynamic_clients including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/radrelay including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/rediswho including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/sql.conf including configuration file /etc/raddb/sql/mysql/dialup.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/control-socket including configuration file /etc/raddb/sites-enabled/inner-tunnel main { user = "radiusd" group = "radiusd" allow_core_dumps = no } including dictionary file /etc/raddb/dictionary main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes allow_vulnerable_openssl = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client 192.168.42.114 { require_message_authenticator = no secret = "radius" shortname = "test" } client 192.168.42.16 { require_message_authenticator = no secret = "radius" shortname = "test2" } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { # from file modules { Module: Creating Auth-Type = digest Module: Creating Post-Auth-Type = REJECT Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/raddb/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/raddb/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no allow_retry = yes } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/raddb/modules/digest Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/raddb/modules/unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/raddb/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 1024 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/raddb/modules/preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /etc/raddb/huntgroups reading pairlist file /etc/raddb/hints Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/raddb/modules/files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } reading pairlist file /etc/raddb/users reading pairlist file /etc/raddb/acct_users reading pairlist file /etc/raddb/preproxy_users Module: Linked to module rlm_sql Module: Instantiating module "sql" from file /etc/raddb/sql.conf sql { driver = "rlm_sql_mysql" server = "192.168.152.3" port = "" login = "freeradius" password = "freeradius" radius_db = "ManagedRADIUSWiFi" read_groups = yes sqltrace = yes sqltracefile = "/var/log/radius/sqltrace.sql" readclients = no deletestalesessions = yes num_sql_socks = 5 lifetime = 0 max_queries = 0 sql_user_name = "%{User-Name}" default_user_profile = "" nas_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT '111', '%{SQL-User-Name}', 'Cleartext-Password', (select GuestAuthRADIUS ('%{SQL-User-Name}', '%{Calling-Station-Id}' ,'%{Packet-Src-IP-Address}')), ':='" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" accounting_onoff_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = unix_timestamp('%S') - unix_timestamp(acctstarttime), acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = %{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= '%S'" accounting_update_query = " UPDATE radacct SET framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_update_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctsessiontime, acctauthentic, connectinfo_start, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, servicetype, framedprotocol, framedipaddress, acctstartdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query_alt = " UPDATE radacct SET acctstarttime = '%S', acctstartdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_start = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{%{Acct-Delay-Time}:-0}')" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = BINARY '%{SQL-User-Name}' ORDER BY priority" connect_failure_retry_delay = 60 simul_count_query = "" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" postauth_query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to freeradius@192.168.152.3:/ManagedRADIUSWiFi rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, NAS-Identifier, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/raddb/modules/detail detail { detailfile = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.accounting_response" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/attrs.accounting_response Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/raddb/modules/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating module "attr_filter.access_reject" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/attrs.access_reject } # modules } # server server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } ... adding new socket proxy address * port 36002 Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.42.16 port 20008, id=70, length=151 NAS-Port-Id = "AP2/1" Calling-Station-Id = "AC-72-89-16-1B-1A" Called-Station-Id = "00-26-3E-62-42-86:GW-Auth" Service-Type = Framed-User EAP-Message = 0x0201000e01616e6f6e796d6f7573 User-Name = "anonymous" NAS-Port = 44309 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 192.168.42.16 NAS-Identifier = "Juniper" Message-Authenticator = 0x5753364a5128f3c9e44d876ffa66a057 # Executing section authorize from file /etc/raddb/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 1 length 14 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated ++[files] = noop [sql] expand: %{User-Name} -> anonymous [sql] sql_set_user escaped user --> 'anonymous' rlm_sql (sql): Reserving sql socket id: 4 [sql] expand: SELECT '111', '%{SQL-User-Name}', 'Cleartext-Password', (select GuestAuthRADIUS ('%{SQL-User-Name}', '%{Calling-Station-Id}' ,'%{Packet-Src-IP-Address}')), ':=' -> SELECT '111', 'anonymous', 'Cleartext-Password', (select GuestAuthRADIUS ('anonymous', 'AC-72-89-16-1B-1A' ,'192.168.42.16')), ':=' rlm_sql_mysql: query: SELECT '111', 'anonymous', 'Cleartext-Password', (select GuestAuthRADIUS ('anonymous', 'AC-72-89-16-1B-1A' ,'192.168.42.16')), ':=' [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'anonymous' ORDER BY id rlm_sql_mysql: query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'anonymous' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = BINARY '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = BINARY 'anonymous' ORDER BY priority rlm_sql_mysql: query: SELECT groupname FROM radusergroup WHERE username = BINARY 'anonymous' ORDER BY priority rlm_sql (sql): Released sql socket id: 4 ++[sql] = ok ++[expiration] = noop ++[logintime] = noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +group authenticate { [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 70 to 192.168.42.16 port 20008 EAP-Message = 0x010200160410274708d3fbb2f2884ede6102efa8fac5 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xefe3b13befe1b51ad39d66d296a9ad51 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.42.16 port 20008, id=71, length=161 NAS-Port-Id = "AP2/1" Calling-Station-Id = "AC-72-89-16-1B-1A" Called-Station-Id = "00-26-3E-62-42-86:GW-Auth" Service-Type = Framed-User User-Name = "anonymous" NAS-Port = 44309 State = 0xefe3b13befe1b51ad39d66d296a9ad51 EAP-Message = 0x020200060315 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 192.168.42.16 NAS-Identifier = "Juniper" Message-Authenticator = 0xf289380646fc6271b4810647cfe84f1c # Executing section authorize from file /etc/raddb/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 2 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated ++[files] = noop [sql] expand: %{User-Name} -> anonymous [sql] sql_set_user escaped user --> 'anonymous' rlm_sql (sql): Reserving sql socket id: 3 [sql] expand: SELECT '111', '%{SQL-User-Name}', 'Cleartext-Password', (select GuestAuthRADIUS ('%{SQL-User-Name}', '%{Calling-Station-Id}' ,'%{Packet-Src-IP-Address}')), ':=' -> SELECT '111', 'anonymous', 'Cleartext-Password', (select GuestAuthRADIUS ('anonymous', 'AC-72-89-16-1B-1A' ,'192.168.42.16')), ':=' rlm_sql_mysql: query: SELECT '111', 'anonymous', 'Cleartext-Password', (select GuestAuthRADIUS ('anonymous', 'AC-72-89-16-1B-1A' ,'192.168.42.16')), ':=' [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'anonymous' ORDER BY id rlm_sql_mysql: query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'anonymous' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = BINARY '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = BINARY 'anonymous' ORDER BY priority rlm_sql_mysql: query: SELECT groupname FROM radusergroup WHERE username = BINARY 'anonymous' ORDER BY priority rlm_sql (sql): Released sql socket id: 3 ++[sql] = ok ++[expiration] = noop ++[logintime] = noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/ttls [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 71 to 192.168.42.16 port 20008 EAP-Message = 0x010300061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xefe3b13beee0a41ad39d66d296a9ad51 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.42.16 port 20008, id=72, length=260 NAS-Port-Id = "AP2/1" Calling-Station-Id = "AC-72-89-16-1B-1A" Called-Station-Id = "00-26-3E-62-42-86:GW-Auth" Service-Type = Framed-User User-Name = "anonymous" NAS-Port = 44309 State = 0xefe3b13beee0a41ad39d66d296a9ad51 EAP-Message = 0x0203006915800000005f160301005a010000560301539878d34807df7593edd62e18def29542ada6f478c3f8ecdd45e04bef429d510000280039003800330032001600130035002f00150012000a0005000400090014001100030006000800ff01000005000f000101 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 192.168.42.16 NAS-Identifier = "Juniper" Message-Authenticator = 0xb15bf35f503ae46a166e90aa2cb51c83 # Executing section authorize from file /etc/raddb/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 3 length 105 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/ttls [eap] processing type ttls [ttls] Authenticate [ttls] processing EAP-TLS TLS Length 95 [ttls] Length Included [ttls] eaptls_verify returned 11 [ttls] (other): before/accept initialization [ttls] TLS_accept: before/accept initialization [ttls] <<< TLS 1.0 Handshake [length 005a], ClientHello [ttls] TLS_accept: SSLv3 read client hello A [ttls] >>> TLS 1.0 Handshake [length 0036], ServerHello [ttls] TLS_accept: SSLv3 write server hello A [ttls] >>> TLS 1.0 Handshake [length 08d0], Certificate [ttls] TLS_accept: SSLv3 write certificate A [ttls] >>> TLS 1.0 Handshake [length 020d], ServerKeyExchange [ttls] TLS_accept: SSLv3 write key exchange A [ttls] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [ttls] TLS_accept: SSLv3 write server done A [ttls] TLS_accept: SSLv3 flush data [ttls] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [ttls] eaptls_process returned 13 ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 72 to 192.168.42.16 port 20008 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x71200169cea51e7af1c334c0 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xefe3b13bede7a41ad39d66d296a9ad51 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.42.16 port 20008, id=73, length=161 NAS-Port-Id = "AP2/1" Calling-Station-Id = "AC-72-89-16-1B-1A" Called-Station-Id = "00-26-3E-62-42-86:GW-Auth" Service-Type = Framed-User User-Name = "anonymous" NAS-Port = 44309 State = 0xefe3b13bede7a41ad39d66d296a9ad51 EAP-Message = 0x020400061500 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 192.168.42.16 NAS-Identifier = "Juniper" Message-Authenticator = 0x9919f28a6ccf424901a11bc90785e61a # Executing section authorize from file /etc/raddb/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/ttls [eap] processing type ttls [ttls] Authenticate [ttls] processing EAP-TLS [ttls] Received TLS ACK [ttls] ACK handshake fragment handler [ttls] eaptls_verify returned 1 [ttls] eaptls_process returned 13 ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 73 to 192.168.42.16 port 20008 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x772e6578616d706c652e636f Message-Authenticator = 0x00000000000000000000000000000000 State = 0xefe3b13bece6a41ad39d66d296a9ad51 Finished request 3. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 192.168.42.16 port 20008, id=74, length=161 NAS-Port-Id = "AP2/1" Calling-Station-Id = "AC-72-89-16-1B-1A" Called-Station-Id = "00-26-3E-62-42-86:GW-Auth" Service-Type = Framed-User User-Name = "anonymous" NAS-Port = 44309 State = 0xefe3b13bece6a41ad39d66d296a9ad51 EAP-Message = 0x020500061500 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 192.168.42.16 NAS-Identifier = "Juniper" Message-Authenticator = 0x42ccd33da273d165fe94cb08485725f3 # Executing section authorize from file /etc/raddb/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 5 length 6 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/ttls [eap] processing type ttls [ttls] Authenticate [ttls] processing EAP-TLS [ttls] Received TLS ACK [ttls] ACK handshake fragment handler [ttls] eaptls_verify returned 1 [ttls] eaptls_process returned 13 ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 74 to 192.168.42.16 port 20008 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xdfd2cfdc7e48153e9f26e843b4c240024c7ad447963ae8b06ac5168336be99df211d9e31230cd0e5a9f600e84f9925461873a7dfe4d317e1555cb2fed7cda3ba3e01ee384b163bcfde16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xefe3b13bebe5a41ad39d66d296a9ad51 Finished request 4. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 192.168.42.16 port 20008, id=75, length=363 NAS-Port-Id = "AP2/1" Calling-Station-Id = "AC-72-89-16-1B-1A" Called-Station-Id = "00-26-3E-62-42-86:GW-Auth" Service-Type = Framed-User User-Name = "anonymous" NAS-Port = 44309 State = 0xefe3b13bebe5a41ad39d66d296a9ad51 EAP-Message = 0x020600d01580000000c616030100861000008200809912a4353193f80d27e13256d7d9599ccf053866a1045ddb003667bf8c59aee651274ca600ec4f67a6e313a4b6acf4569185891b4241389077605ea710a5778ea9ed92a2f57eb700ccf60893eac836e9e5325d13b301a372a48c1a1c4be8eb4ac65693e704dac202aba70652931e3861506c6e57d9906ee323b338389fc79bea14030100010116030100308441ff34f8ba50ea7526ab96a8fdb322634eca5488c3d17293ef299b6df1f08513f772136509bd5a84587c797a20bb04 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 192.168.42.16 NAS-Identifier = "Juniper" Message-Authenticator = 0x2c4cc7284a3bb559e0a44801d10521d0 # Executing section authorize from file /etc/raddb/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 6 length 208 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/ttls [eap] processing type ttls [ttls] Authenticate [ttls] processing EAP-TLS TLS Length 198 [ttls] Length Included [ttls] eaptls_verify returned 11 [ttls] <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange [ttls] TLS_accept: SSLv3 read client key exchange A [ttls] <<< TLS 1.0 ChangeCipherSpec [length 0001] [ttls] <<< TLS 1.0 Handshake [length 0010], Finished [ttls] TLS_accept: SSLv3 read finished A [ttls] >>> TLS 1.0 ChangeCipherSpec [length 0001] [ttls] TLS_accept: SSLv3 write change cipher spec A [ttls] >>> TLS 1.0 Handshake [length 0010], Finished [ttls] TLS_accept: SSLv3 write finished A [ttls] TLS_accept: SSLv3 flush data [ttls] (other): SSL negotiation finished successfully SSL Connection Established [ttls] eaptls_process returned 13 ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 75 to 192.168.42.16 port 20008 EAP-Message = 0x0107004515800000003b14030100010116030100304da578a541d3aeeb31afc9111c8ebb1e9ed16c02a7abf8b1549bfef95e0318ce49e87f19939786fa9f1526990c3f4bb1 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xefe3b13beae4a41ad39d66d296a9ad51 Finished request 5. Going to the next request Waking up in 4.7 seconds. rad_recv: Access-Request packet from host 192.168.42.16 port 20008, id=76, length=314 NAS-Port-Id = "AP2/1" Calling-Station-Id = "AC-72-89-16-1B-1A" Called-Station-Id = "00-26-3E-62-42-86:GW-Auth" Service-Type = Framed-User User-Name = "anonymous" NAS-Port = 44309 State = 0xefe3b13beae4a41ad39d66d296a9ad51 EAP-Message = 0x0207009f1580000000951703010090572132c3bb100f7e832eb74bf857e6384aeb34021c9b0745c39f235bde009d1b409dad39bafeff6260237341e10c9fd063090c63503c2dbc3b1553de553c1873d88539fabe38c250f1dd1c9d2df2e9b2806190c098f4ebfd4a769c7f65154a1e02a708e129096b8d3e8fb0c6e8fe9bab2b43d71fcf6ad14e4fd8e676cb351b0e233467b65cccdbc25281355b3bdc0b40 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 192.168.42.16 NAS-Identifier = "Juniper" Message-Authenticator = 0x16f5285e0cd4416af24a8e8fd9ba000c # Executing section authorize from file /etc/raddb/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 7 length 159 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/ttls [eap] processing type ttls [ttls] Authenticate [ttls] processing EAP-TLS TLS Length 149 [ttls] Length Included [ttls] eaptls_verify returned 11 [ttls] eaptls_process returned 7 [ttls] Session established. Proceeding to decode tunneled attributes. [ttls] Got tunneled request User-Name = "josef@testdomain.com" MS-CHAP-Challenge = 0x1bd3c8b9d05f712d166a28dc85032e3d MS-CHAP2-Response = 0xeb00e4aa1d015b333de96b68fa7258f868270000000000000000777975f5b969b39b08978f3ec81d1dd949960dde0f65af72 FreeRADIUS-Proxied-To = 127.0.0.1 [ttls] Sending tunneled request User-Name = "josef@testdomain.com" MS-CHAP-Challenge = 0x1bd3c8b9d05f712d166a28dc85032e3d MS-CHAP2-Response = 0xeb00e4aa1d015b333de96b68fa7258f868270000000000000000777975f5b969b39b08978f3ec81d1dd949960dde0f65af72 FreeRADIUS-Proxied-To = 127.0.0.1 server inner-tunnel { # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel +group authorize { ++[chap] = noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] = ok [suffix] Looking up realm "testdomain.com" for User-Name = "josef@testdomain.com" [suffix] No such realm "testdomain.com" ++[suffix] = noop ++update control { ++} # update control = noop [eap] No EAP-Message, not doing EAP ++[eap] = noop ++[files] = noop [sql] expand: %{User-Name} -> josef@testdomain.com [sql] sql_set_user escaped user --> 'josef@testdomain.com' rlm_sql (sql): Reserving sql socket id: 2 [sql] expand: SELECT '111', '%{SQL-User-Name}', 'Cleartext-Password', (select GuestAuthRADIUS ('%{SQL-User-Name}', '%{Calling-Station-Id}' ,'%{Packet-Src-IP-Address}')), ':=' -> SELECT '111', 'josef@testdomain.com', 'Cleartext-Password', (select GuestAuthRADIUS ('josef@testdomain.com', '' ,'192.168.42.16')), ':=' rlm_sql_mysql: query: SELECT '111', 'josef@testdomain.com', 'Cleartext-Password', (select GuestAuthRADIUS ('josef@testdomain.com', '' ,'192.168.42.16')), ':=' [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'josef@testdomain.com' ORDER BY id rlm_sql_mysql: query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'josef@testdomain.com' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = BINARY '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = BINARY 'josef@testdomain.com' ORDER BY priority rlm_sql_mysql: query: SELECT groupname FROM radusergroup WHERE username = BINARY 'josef@testdomain.com' ORDER BY priority rlm_sql (sql): Released sql socket id: 2 ++[sql] = ok ++[expiration] = noop ++[logintime] = noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] = noop +} # group authorize = ok Found Auth-Type = MSCHAP # Executing group from file /etc/raddb/sites-enabled/inner-tunnel +group MS-CHAP { [mschap] Creating challenge hash with username: josef@testdomain.com [mschap] Client is using MS-CHAPv2 for josef@testdomain.com, we need NT-Password [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] = reject +} # group MS-CHAP = reject Failed to authenticate the user. Using Post-Auth-Type REJECT # Executing group from file /etc/raddb/sites-enabled/inner-tunnel +group REJECT { [attr_filter.access_reject] expand: %{User-Name} -> josef@testdomain.com attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] = updated +} # group REJECT = updated } # server inner-tunnel [ttls] Got tunneled reply code 3 MS-CHAP-Error = "\353E=691 R=1" [ttls] Got tunneled Access-Reject [eap] Handler failed in EAP/ttls [eap] Failed in EAP select ++[eap] = invalid +} # group authenticate = invalid Failed to authenticate the user. Using Post-Auth-Type REJECT # Executing group from file /etc/raddb/sites-enabled/default +group REJECT { [attr_filter.access_reject] expand: %{User-Name} -> anonymous attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] = updated +} # group REJECT = updated Delaying reject of request 6 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 6 Sending Access-Reject of id 76 to 192.168.42.16 port 20008 EAP-Message = 0x04070004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.7 seconds.