Ivan Kalik wrote:
Have you done some strange things to eap.conf or are you using the default one? Default configuration works.
I replace eap.conf with the Default eap.conf file and this is my debug: ++[ldap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Received EAP-TLV response. [peap] Had sent TLV failure. User was rejected earlier in this session. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Delaying reject of request 9 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 9 Sending Access-Reject of id 198 to 10.14.56.33 port 32768 EAP-Message = 0x040d0004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.6 seconds. Cleaning up request 1 ID 190 with timestamp +51 Cleaning up request 2 ID 191 with timestamp +51 Cleaning up request 3 ID 192 with timestamp +51 Cleaning up request 4 ID 193 with timestamp +51 Cleaning up request 5 ID 194 with timestamp +51 Cleaning up request 6 ID 195 with timestamp +51 Cleaning up request 7 ID 196 with timestamp +51 Cleaning up request 8 ID 197 with timestamp +51 Waking up in 1.0 seconds. Cleaning up request 9 ID 198 with timestamp +51 I'm missing something? -- View this message in context: http://www.nabble.com/freeradius-2.1.6-ldap-%2B-mschapv2-to-authenticate-tp2... Sent from the FreeRadius - User mailing list archive at Nabble.com.