Problems with VLAN selection

4 May 2021

      Hi.  I've got freeradius 3.0.3 running on CentOS 7, to allow clients on a 
group of Aruba WiFi access points to do WPA Enterprise.  The Arubas are 
configured to set the VLAN from Tunnel-Private-Group-Id, with VLAN 52 used 
as a fallback.

The basics seem to work fine (yaay freeradius!); clients with wrong 
usernames and/or passwords (according to /etc/raddb/users) don't get on, 
and clients with correct usernames and passwords do.  But the VLAN 
information I'm trying to pass to the Arubas is either not being passed, 
or it's being ignored, and everyone ends up on VLAN 52.

The relevant snippet of /etc/raddb/users is

tom.yates       Cleartext-Password := "XXXXXXXXXXXX"
                 Tunnel-Type = 13,
                 Tunnel-Medium-Type = 6,
                 Tunnel-Private-Group-ID = 55

Here's the output of "radiusd -X" while i try to authenticate this user, 
and end up on VLAN 52 (instead of VLAN 55, as I'd hoped).  If anyone can 
shed any light on whether the problem is likely to be the Arubas or my 
setup of freeradius, and how I might go about hunting the problem down and 
fixing it (or, indeed, if I'm trying to do something structurally foolish) 
I'd be grateful.

FreeRADIUS Version 3.0.13
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/date
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/utf8
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/operator-name
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
  security {
  	user = "radiusd"
  	group = "radiusd"
  	allow_core_dumps = no
  }
 	name = "radiusd"
 	prefix = "/usr"
 	localstatedir = "/var"
 	logdir = "/var/log/radius"
 	run_dir = "/var/run/radiusd"
}
main {
 	name = "radiusd"
 	prefix = "/usr"
 	localstatedir = "/var"
 	sbindir = "/usr/sbin"
 	logdir = "/var/log/radius"
 	run_dir = "/var/run/radiusd"
 	libdir = "/usr/lib64/freeradius"
 	radacctdir = "/var/log/radius/radacct"
 	hostname_lookups = no
 	max_request_time = 30
 	cleanup_delay = 5
 	max_requests = 16384
 	pidfile = "/var/run/radiusd/radiusd.pid"
 	checkrad = "/usr/sbin/checkrad"
 	debug_level = 0
 	proxy_requests = yes
  log {
  	stripped_names = no
  	auth = yes
  	auth_badpass = no
  	auth_goodpass = no
  	colourise = yes
  	msg_denied = "You are already logged in - access denied"
  }
  resources {
  }
  security {
  	max_attributes = 200
  	reject_delay = 1.000000
  	status_server = yes
  }
}
radiusd: #### Loading Realms and Home Servers ####
  proxy server {
  	retry_delay = 5
  	retry_count = 3
  	default_fallback = no
  	dead_time = 120
  	wake_all_if_all_dead = no
  }
  home_server localhost {
  	ipaddr = 127.0.0.1
  	port = 1812
  	type = "auth"
  	secret = <<< secret >>>
  	response_window = 20.000000
  	response_timeouts = 1
  	max_outstanding = 65536
  	zombie_period = 40
  	status_check = "status-server"
  	ping_interval = 30
  	check_interval = 30
  	check_timeout = 4
  	num_answers_to_alive = 3
  	revive_interval = 120
   limit {
   	max_connections = 16
   	max_requests = 0
   	lifetime = 0
   	idle_timeout = 0
   }
   coa {
   	irt = 2
   	mrt = 16
   	mrc = 5
   	mrd = 30
   }
  }
  home_server_pool my_auth_failover {
 	type = fail-over
 	home_server = localhost
  }
  realm example.com {
 	auth_pool = my_auth_failover
  }
  realm LOCAL {
  }
radiusd: #### Loading Clients ####
  client localhost {
  	ipaddr = 127.0.0.1
  	require_message_authenticator = no
  	secret = <<< secret >>>
  	nas_type = "other"
  	proto = "*"
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
  }
  client localhost_ipv6 {
  	ipv6addr = ::1
  	require_message_authenticator = no
  	secret = <<< secret >>>
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
  }
  client private-network-1 {
  	ipaddr = 192.168.48.0/24
  	require_message_authenticator = no
  	secret = <<< secret >>>
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
  }
Debugger not attached
  # Creating Auth-Type = mschap
  # Creating Auth-Type = digest
  # Creating Auth-Type = eap
  # Creating Auth-Type = PAP
  # Creating Auth-Type = CHAP
  # Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
  modules {
   # Loaded module rlm_always
   # Loading module "reject" from file /etc/raddb/mods-enabled/always
   always reject {
   	rcode = "reject"
   	simulcount = 0
   	mpp = no
   }
   # Loading module "fail" from file /etc/raddb/mods-enabled/always
   always fail {
   	rcode = "fail"
   	simulcount = 0
   	mpp = no
   }
   # Loading module "ok" from file /etc/raddb/mods-enabled/always
   always ok {
   	rcode = "ok"
   	simulcount = 0
   	mpp = no
   }
   # Loading module "handled" from file /etc/raddb/mods-enabled/always
   always handled {
   	rcode = "handled"
   	simulcount = 0
   	mpp = no
   }
   # Loading module "invalid" from file /etc/raddb/mods-enabled/always
   always invalid {
   	rcode = "invalid"
   	simulcount = 0
   	mpp = no
   }
   # Loading module "userlock" from file /etc/raddb/mods-enabled/always
   always userlock {
   	rcode = "userlock"
   	simulcount = 0
   	mpp = no
   }
   # Loading module "notfound" from file /etc/raddb/mods-enabled/always
   always notfound {
   	rcode = "notfound"
   	simulcount = 0
   	mpp = no
   }
   # Loading module "noop" from file /etc/raddb/mods-enabled/always
   always noop {
   	rcode = "noop"
   	simulcount = 0
   	mpp = no
   }
   # Loading module "updated" from file /etc/raddb/mods-enabled/always
   always updated {
   	rcode = "updated"
   	simulcount = 0
   	mpp = no
   }
   # Loaded module rlm_attr_filter
   # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
   attr_filter attr_filter.post-proxy {
   	filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
   	key = "%{Realm}"
   	relaxed = no
   }
   # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
   attr_filter attr_filter.pre-proxy {
   	filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
   	key = "%{Realm}"
   	relaxed = no
   }
   # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
   attr_filter attr_filter.access_reject {
   	filename = "/etc/raddb/mods-config/attr_filter/access_reject"
   	key = "%{User-Name}"
   	relaxed = no
   }
   # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
   attr_filter attr_filter.access_challenge {
   	filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
   	key = "%{User-Name}"
   	relaxed = no
   }
   # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
   attr_filter attr_filter.accounting_response {
   	filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
   	key = "%{User-Name}"
   	relaxed = no
   }
   # Loaded module rlm_cache
   # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
   cache cache_eap {
   	driver = "rlm_cache_rbtree"
   	key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
   	ttl = 15
   	max_entries = 0
   	epoch = 0
   	add_stats = no
   }
   # Loaded module rlm_chap
   # Loading module "chap" from file /etc/raddb/mods-enabled/chap
   # Loaded module rlm_date
   # Loading module "date" from file /etc/raddb/mods-enabled/date
   date {
   	format = "%b %e %Y %H:%M:%S %Z"
   }
   # Loaded module rlm_detail
   # Loading module "detail" from file /etc/raddb/mods-enabled/detail
   detail {
   	filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
   	header = "%t"
   	permissions = 384
   	locking = no
   	escape_filenames = no
   	log_packet_header = no
   }
   # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
   detail auth_log {
   	filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
   	header = "%t"
   	permissions = 384
   	locking = no
   	escape_filenames = no
   	log_packet_header = no
   }
   # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
   detail reply_log {
   	filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
   	header = "%t"
   	permissions = 384
   	locking = no
   	escape_filenames = no
   	log_packet_header = no
   }
   # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
   detail pre_proxy_log {
   	filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
   	header = "%t"
   	permissions = 384
   	locking = no
   	escape_filenames = no
   	log_packet_header = no
   }
   # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
   detail post_proxy_log {
   	filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
   	header = "%t"
   	permissions = 384
   	locking = no
   	escape_filenames = no
   	log_packet_header = no
   }
   # Loaded module rlm_dhcp
   # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp
   # Loaded module rlm_digest
   # Loading module "digest" from file /etc/raddb/mods-enabled/digest
   # Loaded module rlm_dynamic_clients
   # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients
   # Loaded module rlm_eap
   # Loading module "eap" from file /etc/raddb/mods-enabled/eap
   eap {
   	default_eap_type = "md5"
   	timer_expire = 60
   	ignore_unknown_eap_types = no
   	cisco_accounting_username_bug = no
   	max_sessions = 16384
   }
   # Loaded module rlm_exec
   # Loading module "echo" from file /etc/raddb/mods-enabled/echo
   exec echo {
   	wait = yes
   	program = "/bin/echo %{User-Name}"
   	input_pairs = "request"
   	output_pairs = "reply"
   	shell_escape = yes
   }
   # Loading module "exec" from file /etc/raddb/mods-enabled/exec
   exec {
   	wait = no
   	input_pairs = "request"
   	shell_escape = yes
   	timeout = 10
   }
   # Loaded module rlm_expiration
   # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration
   # Loaded module rlm_expr
   # Loading module "expr" from file /etc/raddb/mods-enabled/expr
   expr {
   	safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
   }
   # Loaded module rlm_files
   # Loading module "files" from file /etc/raddb/mods-enabled/files
   files {
   	filename = "/etc/raddb/mods-config/files/authorize"
   	acctusersfile = "/etc/raddb/mods-config/files/accounting"
   	preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
   }
   # Loaded module rlm_linelog
   # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
   linelog {
   	filename = "/var/log/radius/linelog"
   	escape_filenames = no
   	syslog_severity = "info"
   	permissions = 384
   	format = "This is a log message for %{User-Name}"
   	reference = "messages.%{%{reply:Packet-Type}:-default}"
   }
   # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog
   linelog log_accounting {
   	filename = "/var/log/radius/linelog-accounting"
   	escape_filenames = no
   	syslog_severity = "info"
   	permissions = 384
   	format = ""
   	reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
   }
   # Loaded module rlm_logintime
   # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
   logintime {
   	minimum_timeout = 60
   }
   # Loaded module rlm_mschap
   # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
   mschap {
   	use_mppe = yes
   	require_encryption = no
   	require_strong = no
   	with_ntdomain_hack = yes
    passchange {
    }
   	allow_retry = yes
   	winbind_retry_with_normalised_username = no
   }
   # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
   exec ntlm_auth {
   	wait = yes
   	program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
   	shell_escape = yes
   }
   # Loaded module rlm_pap
   # Loading module "pap" from file /etc/raddb/mods-enabled/pap
   pap {
   	normalise = yes
   }
   # Loaded module rlm_passwd
   # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
   passwd etc_passwd {
   	filename = "/etc/passwd"
   	format = "*User-Name:Crypt-Password:"
   	delimiter = ":"
   	ignore_nislike = no
   	ignore_empty = yes
   	allow_multiple_keys = no
   	hash_size = 100
   }
   # Loaded module rlm_preprocess
   # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess
   preprocess {
   	huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
   	hints = "/etc/raddb/mods-config/preprocess/hints"
   	with_ascend_hack = no
   	ascend_channels_per_line = 23
   	with_ntdomain_hack = no
   	with_specialix_jetstream_hack = no
   	with_cisco_vsa_hack = no
   	with_alvarion_vsa_hack = no
   }
   # Loaded module rlm_radutmp
   # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
   radutmp {
   	filename = "/var/log/radius/radutmp"
   	username = "%{User-Name}"
   	case_sensitive = yes
   	check_with_nas = yes
   	permissions = 384
   	caller_id = yes
   }
   # Loaded module rlm_realm
   # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
   realm IPASS {
   	format = "prefix"
   	delimiter = "/"
   	ignore_default = no
   	ignore_null = no
   }
   # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
   realm suffix {
   	format = "suffix"
   	delimiter = "@"
   	ignore_default = no
   	ignore_null = no
   }
   # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
   realm realmpercent {
   	format = "suffix"
   	delimiter = "%"
   	ignore_default = no
   	ignore_null = no
   }
   # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
   realm ntdomain {
   	format = "prefix"
   	delimiter = "\\"
   	ignore_default = no
   	ignore_null = no
   }
   # Loaded module rlm_replicate
   # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
   # Loaded module rlm_soh
   # Loading module "soh" from file /etc/raddb/mods-enabled/soh
   soh {
   	dhcp = yes
   }
   # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
   radutmp sradutmp {
   	filename = "/var/log/radius/sradutmp"
   	username = "%{User-Name}"
   	case_sensitive = yes
   	check_with_nas = yes
   	permissions = 420
   	caller_id = no
   }
   # Loaded module rlm_unix
   # Loading module "unix" from file /etc/raddb/mods-enabled/unix
   unix {
   	radwtmp = "/var/log/radius/radwtmp"
   }
Creating attribute Unix-Group
   # Loaded module rlm_unpack
   # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
   # Loaded module rlm_utf8
   # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
   instantiate {
   }
   # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
   # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
   # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
   # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
   # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
   # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
   # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
   # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
   # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
   # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
   # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
   # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" 	found in filter list for realm "DEFAULT". 
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" 	found in filter list for realm "DEFAULT".
   # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
   # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
   # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
   # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
   # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
   # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log
   # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
   # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
   # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
    # Linked to sub-module rlm_eap_md5
    # Linked to sub-module rlm_eap_leap
    # Linked to sub-module rlm_eap_gtc
    gtc {
    	challenge = "Password: "
    	auth_type = "PAP"
    }
    # Linked to sub-module rlm_eap_tls
    tls {
    	tls = "tls-common"
    }
    tls-config tls-common {
    	verify_depth = 0
    	ca_path = "/etc/raddb/certs"
    	pem_file_type = yes
    	private_key_file = "/etc/raddb/certs/server.pem"
    	certificate_file = "/etc/raddb/certs/server.pem"
    	ca_file = "/etc/raddb/certs/ca.pem"
    	private_key_password = <<< secret >>>
    	dh_file = "/etc/raddb/certs/dh"
    	fragment_size = 1024
    	include_length = yes
    	auto_chain = yes
    	check_crl = no
    	check_all_crl = no
    	cipher_list = "DEFAULT"
    	cipher_server_preference = no
    	ecdh_curve = "prime256v1"
     cache {
     	enable = no
     	lifetime = 24
     	max_entries = 255
     }
     verify {
     	skip_if_ocsp_ok = no
     }
     ocsp {
     	enable = no
     	override_cert_url = yes
     	url = "http://127.0.0.1/ocsp/"
     	use_nonce = yes
     	timeout = 0
     	softfail = no
     }
    }
    # Linked to sub-module rlm_eap_ttls
    ttls {
    	tls = "tls-common"
    	default_eap_type = "md5"
    	copy_request_to_tunnel = no
    	use_tunneled_reply = no
    	virtual_server = "inner-tunnel"
    	include_length = yes
    	require_client_cert = no
    }
tls: Using cached TLS configuration from previous invocation
    # Linked to sub-module rlm_eap_peap
    peap {
    	tls = "tls-common"
    	default_eap_type = "mschapv2"
    	copy_request_to_tunnel = no
    	use_tunneled_reply = no
    	proxy_tunneled_request_as_eap = yes
    	virtual_server = "inner-tunnel"
    	soh = no
    	require_client_cert = no
    }
tls: Using cached TLS configuration from previous invocation
    # Linked to sub-module rlm_eap_mschapv2
    mschapv2 {
    	with_ntdomain_hack = no
    	send_error = no
    }
   # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration
   # Instantiating module "files" from file /etc/raddb/mods-enabled/files
reading pairlist file /etc/raddb/mods-config/files/authorize
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
   # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
   # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog
   # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime
   # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
   # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
   # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
   # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
   # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
   # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
   # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm
   # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
  } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
  # Loading authenticate {...}
  # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
  # Loading preacct {...}
  # Loading accounting {...}
  # Loading post-proxy {...}
  # Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
  # Loading authenticate {...}
  # Loading authorize {...}
  # Loading session {...}
  # Loading post-proxy {...}
  # Loading post-auth {...}
  # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:330
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
   	type = "auth"
   	ipaddr = *
   	port = 0
    limit {
    	max_connections = 16
    	lifetime = 0
    	idle_timeout = 30
    }
}
listen {
   	type = "acct"
   	ipaddr = *
   	port = 0
    limit {
    	max_connections = 16
    	lifetime = 0
    	idle_timeout = 30
    }
}
listen {
   	type = "auth"
   	ipv6addr = ::
   	port = 0
    limit {
    	max_connections = 16
    	lifetime = 0
    	idle_timeout = 30
    }
}
listen {
   	type = "acct"
   	ipv6addr = ::
   	port = 0
    limit {
    	max_connections = 16
    	lifetime = 0
    	idle_timeout = 30
    }
}
listen {
   	type = "auth"
   	ipaddr = 127.0.0.1
   	port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 46989
Listening on proxy address :: port 36957
Ready to process requests
(0) Received Access-Request Id 78 from 192.168.48.16:58562 to 192.168.49.23:1812 length 215
(0)   User-Name = "tom.yates"
(0)   NAS-IP-Address = 192.168.48.16
(0)   NAS-Port = 0
(0)   NAS-Identifier = "192.168.48.16"
(0)   NAS-Port-Type = Wireless-802.11
(0)   Calling-Station-Id = "185e0f77d68e"
(0)   Called-Station-Id = "f42e7fc2e520"
(0)   Service-Type = Framed-User
(0)   Framed-MTU = 1100
(0)   EAP-Message = 0x0201000e01746f6d2e7961746573
(0)   Aruba-Essid-Name = "fangorn2"
(0)   Aruba-Location-Id = "f4:2e:7f:c2:e5:20"
(0)   Aruba-AP-Group = "SetMeUp-C3:01:F8"
(0)   Aruba-Device-Type = "NOFP"
(0)   Message-Authenticator = 0x647d7a9764c69ab5221d7e7b16725be1
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 1 length 14
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 2 length 22
(0) eap: EAP session adding &reply:State = 0xa07fc9dca07dcde6
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 78 from 192.168.49.23:1812 to 192.168.48.16:58562 length 0
(0)   EAP-Message = 0x010200160410f6ce6fec38c00f54d51f8615f2287bd8
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0xa07fc9dca07dcde680005dbd51042520
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 79 from 192.168.48.16:58562 to 192.168.49.23:1812 length 225
(1)   User-Name = "tom.yates"
(1)   NAS-IP-Address = 192.168.48.16
(1)   NAS-Port = 0
(1)   NAS-Identifier = "192.168.48.16"
(1)   NAS-Port-Type = Wireless-802.11
(1)   Calling-Station-Id = "185e0f77d68e"
(1)   Called-Station-Id = "f42e7fc2e520"
(1)   Service-Type = Framed-User
(1)   Framed-MTU = 1100
(1)   EAP-Message = 0x020200060319
(1)   State = 0xa07fc9dca07dcde680005dbd51042520
(1)   Aruba-Essid-Name = "fangorn2"
(1)   Aruba-Location-Id = "f4:2e:7f:c2:e5:20"
(1)   Aruba-AP-Group = "SetMeUp-C3:01:F8"
(1)   Aruba-Device-Type = "NOFP"
(1)   Message-Authenticator = 0xcaaa57b711e9a0a38c577e217ecffe3e
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/raddb/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 2 length 6
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1)     [eap] = updated
(1) files: users: Matched entry tom.yates at line 95
(1)     [files] = ok
(1)     [expiration] = noop
(1)     [logintime] = noop
(1) pap: WARNING: Auth-Type already set.  Not setting to PAP
(1)     [pap] = noop
(1)   } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0xa07fc9dca07dcde6
(1) eap: Finished EAP session with state 0xa07fc9dca07dcde6
(1) eap: Previous EAP request found for state 0xa07fc9dca07dcde6, released from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Initiating new EAP-TLS session
(1) eap_peap: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 3 length 6
(1) eap: EAP session adding &reply:State = 0xa07fc9dca17cd0e6
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1)   Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 79 from 192.168.49.23:1812 to 192.168.48.16:58562 length 0
(1)   Tunnel-Type = VLAN
(1)   Tunnel-Medium-Type = IEEE-802
(1)   Tunnel-Private-Group-Id = "55"
(1)   EAP-Message = 0x010300061920
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0xa07fc9dca17cd0e680005dbd51042520
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 80 from 192.168.48.16:58562 to 192.168.49.23:1812 length 421
(2)   User-Name = "tom.yates"
(2)   NAS-IP-Address = 192.168.48.16
(2)   NAS-Port = 0
(2)   NAS-Identifier = "192.168.48.16"
(2)   NAS-Port-Type = Wireless-802.11
(2)   Calling-Station-Id = "185e0f77d68e"
(2)   Called-Station-Id = "f42e7fc2e520"
(2)   Service-Type = Framed-User
(2)   Framed-MTU = 1100
(2)   EAP-Message = 0x020300ca1980000000c016030100bb010000b703033ad08fce4375d854943de05e8620f9a9c0dcc628e60554ec66b23f893657e9ee000048c02cc030cca9cca8c0adc02bc02fc0acc023c027c00ac014c009c013009dc09d009cc09c003d003c0035002f009fccaac09f009ec09e006b006700390033c0
(2)   State = 0xa07fc9dca17cd0e680005dbd51042520
(2)   Aruba-Essid-Name = "fangorn2"
(2)   Aruba-Location-Id = "f4:2e:7f:c2:e5:20"
(2)   Aruba-AP-Group = "SetMeUp-C3:01:F8"
(2)   Aruba-Device-Type = "NOFP"
(2)   Message-Authenticator = 0x57c8fd066700354386713a22e1b385c7
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/raddb/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 3 length 202
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0xa07fc9dca17cd0e6
(2) eap: Finished EAP session with state 0xa07fc9dca17cd0e6
(2) eap: Previous EAP request found for state 0xa07fc9dca17cd0e6, released from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: Peer indicated complete TLS record size will be 192 bytes
(2) eap_peap: Got complete TLS record (192 bytes)
(2) eap_peap: [eaptls verify] = length included
(2) eap_peap: (other): before/accept initialization
(2) eap_peap: TLS_accept: before/accept initialization
(2) eap_peap: <<< recv TLS 1.2  [length 00bb] 
(2) eap_peap: TLS_accept: SSLv3 read client hello A
(2) eap_peap: >>> send TLS 1.2  [length 0039] 
(2) eap_peap: TLS_accept: SSLv3 write server hello A
(2) eap_peap: >>> send TLS 1.2  [length 0890] 
(2) eap_peap: TLS_accept: SSLv3 write certificate A
(2) eap_peap: >>> send TLS 1.2  [length 014d] 
(2) eap_peap: TLS_accept: SSLv3 write key exchange A
(2) eap_peap: >>> send TLS 1.2  [length 0004] 
(2) eap_peap: TLS_accept: SSLv3 write server done A
(2) eap_peap: TLS_accept: SSLv3 flush data
(2) eap_peap: TLS_accept: SSLv3 read client certificate A
(2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A
(2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A
(2) eap_peap: In SSL Handshake Phase
(2) eap_peap: In SSL Accept mode
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 4 length 1004
(2) eap: EAP session adding &reply:State = 0xa07fc9dca27bd0e6
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 80 from 192.168.49.23:1812 to 192.168.48.16:58562 length 0
(2)   EAP-Message = 0x010403ec19c000000a2e1603030039020000350303da86cb86c6c2b768eafbac85b933efe42b54581ef9cd5a20f6de9d4fc755d63f00c03000000dff01000100000b00040300010216030308900b00088c0008890003c5308203c1308202a9a003020102020103300d06092a864886f70d01010b050030
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0xa07fc9dca27bd0e680005dbd51042520
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 81 from 192.168.48.16:58562 to 192.168.49.23:1812 length 225
(3)   User-Name = "tom.yates"
(3)   NAS-IP-Address = 192.168.48.16
(3)   NAS-Port = 0
(3)   NAS-Identifier = "192.168.48.16"
(3)   NAS-Port-Type = Wireless-802.11
(3)   Calling-Station-Id = "185e0f77d68e"
(3)   Called-Station-Id = "f42e7fc2e520"
(3)   Service-Type = Framed-User
(3)   Framed-MTU = 1100
(3)   EAP-Message = 0x020400061900
(3)   State = 0xa07fc9dca27bd0e680005dbd51042520
(3)   Aruba-Essid-Name = "fangorn2"
(3)   Aruba-Location-Id = "f4:2e:7f:c2:e5:20"
(3)   Aruba-AP-Group = "SetMeUp-C3:01:F8"
(3)   Aruba-Device-Type = "NOFP"
(3)   Message-Authenticator = 0x741b68acc05edfebc0dd0626a1815ed5
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/raddb/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 4 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0xa07fc9dca27bd0e6
(3) eap: Finished EAP session with state 0xa07fc9dca27bd0e6
(3) eap: Previous EAP request found for state 0xa07fc9dca27bd0e6, released from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer ACKed our handshake fragment
(3) eap_peap: [eaptls verify] = request
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 5 length 1000
(3) eap: EAP session adding &reply:State = 0xa07fc9dca37ad0e6
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3)   Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 81 from 192.168.49.23:1812 to 192.168.48.16:58562 length 0
(3)   EAP-Message = 0x010503e8194078eae5b8f0663ff9f780adaa5e4659917b5b3bdb897d8405648cc4156c25342a8d1d2b50da1e60cbc606972dcccacb880004be308204ba308203a2a003020102020900f689a5e0dadfa15c300d06092a864886f70d01010b0500308185310b3009060355040613024742310f300d060355
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0xa07fc9dca37ad0e680005dbd51042520
(3) Finished request
Waking up in 4.8 seconds.
(4) Received Access-Request Id 82 from 192.168.48.16:58562 to 192.168.49.23:1812 length 225
(4)   User-Name = "tom.yates"
(4)   NAS-IP-Address = 192.168.48.16
(4)   NAS-Port = 0
(4)   NAS-Identifier = "192.168.48.16"
(4)   NAS-Port-Type = Wireless-802.11
(4)   Calling-Station-Id = "185e0f77d68e"
(4)   Called-Station-Id = "f42e7fc2e520"
(4)   Service-Type = Framed-User
(4)   Framed-MTU = 1100
(4)   EAP-Message = 0x020500061900
(4)   State = 0xa07fc9dca37ad0e680005dbd51042520
(4)   Aruba-Essid-Name = "fangorn2"
(4)   Aruba-Location-Id = "f4:2e:7f:c2:e5:20"
(4)   Aruba-AP-Group = "SetMeUp-C3:01:F8"
(4)   Aruba-Device-Type = "NOFP"
(4)   Message-Authenticator = 0x40a24d39210a345c7f6e7f8e1eb33eb2
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/raddb/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 5 length 6
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0xa07fc9dca37ad0e6
(4) eap: Finished EAP session with state 0xa07fc9dca37ad0e6
(4) eap: Previous EAP request found for state 0xa07fc9dca37ad0e6, released from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer ACKed our handshake fragment
(4) eap_peap: [eaptls verify] = request
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 6 length 624
(4) eap: EAP session adding &reply:State = 0xa07fc9dca479d0e6
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4)   Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 82 from 192.168.49.23:1812 to 192.168.48.16:58562 length 0
(4)   EAP-Message = 0x010602701900864886f70d01010b050003820101001ec2191407b9fbab46db8e32923b5d1ccd14f2f189e73498c6da6c1279d4585efed6b97d906f50b7033ac15c05b4846c82f865332ade66d98897d6438d393718ef023898a943a25eda9583ce9d55ca64f4fe2fe664935e3f8af947ca61f6a321aae3
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0xa07fc9dca479d0e680005dbd51042520
(4) Finished request
Waking up in 4.8 seconds.
(5) Received Access-Request Id 83 from 192.168.48.16:58562 to 192.168.49.23:1812 length 355
(5)   User-Name = "tom.yates"
(5)   NAS-IP-Address = 192.168.48.16
(5)   NAS-Port = 0
(5)   NAS-Identifier = "192.168.48.16"
(5)   NAS-Port-Type = Wireless-802.11
(5)   Calling-Station-Id = "185e0f77d68e"
(5)   Called-Station-Id = "f42e7fc2e520"
(5)   Service-Type = Framed-User
(5)   Framed-MTU = 1100
(5)   EAP-Message = 0x0206008819800000007e1603030046100000424104d8fb1311dfa8b17e7fa4cd4f6fd55a66b945471b4511b8fa8eadfdf42ea2a42347e746e5e2f1bba221546692e5460ad7130dfbe1885efb16de44d21bcf3bc00114030300010116030300287feab33215d6773d29b4edf46da4ee539bd2da3fd3e299
(5)   State = 0xa07fc9dca479d0e680005dbd51042520
(5)   Aruba-Essid-Name = "fangorn2"
(5)   Aruba-Location-Id = "f4:2e:7f:c2:e5:20"
(5)   Aruba-AP-Group = "SetMeUp-C3:01:F8"
(5)   Aruba-Device-Type = "NOFP"
(5)   Message-Authenticator = 0x28b026dfce74b941698dd2dc9e1e3329
(5) session-state: No cached attributes
(5) # Executing section authorize from file /etc/raddb/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 6 length 136
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0xa07fc9dca479d0e6
(5) eap: Finished EAP session with state 0xa07fc9dca479d0e6
(5) eap: Previous EAP request found for state 0xa07fc9dca479d0e6, released from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: Peer indicated complete TLS record size will be 126 bytes
(5) eap_peap: Got complete TLS record (126 bytes)
(5) eap_peap: [eaptls verify] = length included
(5) eap_peap: <<< recv TLS 1.2  [length 0046] 
(5) eap_peap: TLS_accept: SSLv3 read client key exchange A
(5) eap_peap: TLS_accept: SSLv3 read certificate verify A
(5) eap_peap: <<< recv TLS 1.2  [length 0001] 
(5) eap_peap: <<< recv TLS 1.2  [length 0010] 
(5) eap_peap: TLS_accept: SSLv3 read finished A
(5) eap_peap: >>> send TLS 1.2  [length 0001] 
(5) eap_peap: TLS_accept: SSLv3 write change cipher spec A
(5) eap_peap: >>> send TLS 1.2  [length 0010] 
(5) eap_peap: TLS_accept: SSLv3 write finished A
(5) eap_peap: TLS_accept: SSLv3 flush data
(5) eap_peap: (other): SSL negotiation finished successfully
(5) eap_peap: SSL Connection Established
(5) eap_peap: [eaptls process] = handled
(5) eap: Sending EAP Request (code 1) ID 7 length 57
(5) eap: EAP session adding &reply:State = 0xa07fc9dca578d0e6
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5)   Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 83 from 192.168.49.23:1812 to 192.168.48.16:58562 length 0
(5)   EAP-Message = 0x0107003919001403030001011603030028192ab2f252f3b0b5938be07bece4b288d6216d6f2fe997e950c3fd05ee231782e3273eaadde13910
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0xa07fc9dca578d0e680005dbd51042520
(5) Finished request
Waking up in 4.8 seconds.
(6) Received Access-Request Id 84 from 192.168.48.16:58562 to 192.168.49.23:1812 length 225
(6)   User-Name = "tom.yates"
(6)   NAS-IP-Address = 192.168.48.16
(6)   NAS-Port = 0
(6)   NAS-Identifier = "192.168.48.16"
(6)   NAS-Port-Type = Wireless-802.11
(6)   Calling-Station-Id = "185e0f77d68e"
(6)   Called-Station-Id = "f42e7fc2e520"
(6)   Service-Type = Framed-User
(6)   Framed-MTU = 1100
(6)   EAP-Message = 0x020700061900
(6)   State = 0xa07fc9dca578d0e680005dbd51042520
(6)   Aruba-Essid-Name = "fangorn2"
(6)   Aruba-Location-Id = "f4:2e:7f:c2:e5:20"
(6)   Aruba-AP-Group = "SetMeUp-C3:01:F8"
(6)   Aruba-Device-Type = "NOFP"
(6)   Message-Authenticator = 0xac609c4e0f69729211d71ade3e01f633
(6) session-state: No cached attributes
(6) # Executing section authorize from file /etc/raddb/sites-enabled/default
(6)   authorize {
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = notfound
(6)     } # policy filter_username = notfound
(6)     [preprocess] = ok
(6)     [chap] = noop
(6)     [mschap] = noop
(6)     [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)     [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 7 length 6
(6) eap: Continuing tunnel setup
(6)     [eap] = ok
(6)   } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/raddb/sites-enabled/default
(6)   authenticate {
(6) eap: Expiring EAP session with state 0xa07fc9dca578d0e6
(6) eap: Finished EAP session with state 0xa07fc9dca578d0e6
(6) eap: Previous EAP request found for state 0xa07fc9dca578d0e6, released from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: Continuing EAP-TLS
(6) eap_peap: Peer ACKed our handshake fragment.  handshake is finished
(6) eap_peap: [eaptls verify] = success
(6) eap_peap: [eaptls process] = success
(6) eap_peap: Session established.  Decoding tunneled attributes
(6) eap_peap: PEAP state TUNNEL ESTABLISHED
(6) eap: Sending EAP Request (code 1) ID 8 length 40
(6) eap: EAP session adding &reply:State = 0xa07fc9dca677d0e6
(6)     [eap] = handled
(6)   } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/raddb/sites-enabled/default
(6)   Challenge { ... } # empty sub-section is ignored
(6) Sent Access-Challenge Id 84 from 192.168.49.23:1812 to 192.168.48.16:58562 length 0
(6)   EAP-Message = 0x010800281900170303001d192ab2f252f3b0b6a369609cbaa14df410d7c96d8ecf737d83d3b9b272
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0xa07fc9dca677d0e680005dbd51042520
(6) Finished request
Waking up in 4.7 seconds.
(7) Received Access-Request Id 85 from 192.168.48.16:58562 to 192.168.49.23:1812 length 264
(7)   User-Name = "tom.yates"
(7)   NAS-IP-Address = 192.168.48.16
(7)   NAS-Port = 0
(7)   NAS-Identifier = "192.168.48.16"
(7)   NAS-Port-Type = Wireless-802.11
(7)   Calling-Station-Id = "185e0f77d68e"
(7)   Called-Station-Id = "f42e7fc2e520"
(7)   Service-Type = Framed-User
(7)   Framed-MTU = 1100
(7)   EAP-Message = 0x0208002d190017030300227feab33215d6773e709a5af6712abfbc2a1bbc6dfe3c334d443618d3d33f6d302223
(7)   State = 0xa07fc9dca677d0e680005dbd51042520
(7)   Aruba-Essid-Name = "fangorn2"
(7)   Aruba-Location-Id = "f4:2e:7f:c2:e5:20"
(7)   Aruba-AP-Group = "SetMeUp-C3:01:F8"
(7)   Aruba-Device-Type = "NOFP"
(7)   Message-Authenticator = 0x47acff8723fab40cc12d833733336cf4
(7) session-state: No cached attributes
(7) # Executing section authorize from file /etc/raddb/sites-enabled/default
(7)   authorize {
(7)     policy filter_username {
(7)       if (&User-Name) {
(7)       if (&User-Name)  -> TRUE
(7)       if (&User-Name)  {
(7)         if (&User-Name =~ / /) {
(7)         if (&User-Name =~ / /)  -> FALSE
(7)         if (&User-Name =~ /@[^@]*@/ ) {
(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)         if (&User-Name =~ /\.\./ ) {
(7)         if (&User-Name =~ /\.\./ )  -> FALSE
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(7)         if (&User-Name =~ /\.$/)  {
(7)         if (&User-Name =~ /\.$/)   -> FALSE
(7)         if (&User-Name =~ /@\./)  {
(7)         if (&User-Name =~ /@\./)   -> FALSE
(7)       } # if (&User-Name)  = notfound
(7)     } # policy filter_username = notfound
(7)     [preprocess] = ok
(7)     [chap] = noop
(7)     [mschap] = noop
(7)     [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)     [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 8 length 45
(7) eap: Continuing tunnel setup
(7)     [eap] = ok
(7)   } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/raddb/sites-enabled/default
(7)   authenticate {
(7) eap: Expiring EAP session with state 0xa07fc9dca677d0e6
(7) eap: Finished EAP session with state 0xa07fc9dca677d0e6
(7) eap: Previous EAP request found for state 0xa07fc9dca677d0e6, released from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: Continuing EAP-TLS
(7) eap_peap: [eaptls verify] = ok
(7) eap_peap: Done initial handshake
(7) eap_peap: [eaptls process] = ok
(7) eap_peap: Session established.  Decoding tunneled attributes
(7) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(7) eap_peap: Identity - tom.yates
(7) eap_peap: Got inner identity 'tom.yates'
(7) eap_peap: Setting default EAP type for tunneled EAP session
(7) eap_peap: Got tunneled request
(7) eap_peap:   EAP-Message = 0x0208000e01746f6d2e7961746573
(7) eap_peap: Setting User-Name to tom.yates
(7) eap_peap: Sending tunneled request to inner-tunnel
(7) eap_peap:   EAP-Message = 0x0208000e01746f6d2e7961746573
(7) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_peap:   User-Name = "tom.yates"
(7) Virtual server inner-tunnel received request
(7)   EAP-Message = 0x0208000e01746f6d2e7961746573
(7)   FreeRADIUS-Proxied-To = 127.0.0.1
(7)   User-Name = "tom.yates"
(7) WARNING: Outer and inner identities are the same.  User privacy is compromised.
(7) server inner-tunnel {
(7)   # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel
(7)     authorize {
(7)       policy filter_username {
(7)         if (&User-Name) {
(7)         if (&User-Name)  -> TRUE
(7)         if (&User-Name)  {
(7)           if (&User-Name =~ / /) {
(7)           if (&User-Name =~ / /)  -> FALSE
(7)           if (&User-Name =~ /@[^@]*@/ ) {
(7)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)           if (&User-Name =~ /\.\./ ) {
(7)           if (&User-Name =~ /\.\./ )  -> FALSE
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(7)           if (&User-Name =~ /\.$/)  {
(7)           if (&User-Name =~ /\.$/)   -> FALSE
(7)           if (&User-Name =~ /@\./)  {
(7)           if (&User-Name =~ /@\./)   -> FALSE
(7)         } # if (&User-Name)  = notfound
(7)       } # policy filter_username = notfound
(7)       [chap] = noop
(7)       [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)       [suffix] = noop
(7)       update control {
(7)         &Proxy-To-Realm := LOCAL
(7)       } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 8 length 14
(7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(7)       [eap] = ok
(7)     } # authorize = ok
(7)   Found Auth-Type = eap
(7)   # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(7)     authenticate {
(7) eap: Peer sent packet with method EAP Identity (1)
(7) eap: Calling submodule eap_mschapv2 to process data
(7) eap_mschapv2: Issuing Challenge
(7) eap: Sending EAP Request (code 1) ID 9 length 43
(7) eap: EAP session adding &reply:State = 0x1010a47b1019be78
(7)       [eap] = handled
(7)     } # authenticate = handled
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7)   EAP-Message = 0x0109002b1a01090026102555ff5f1f4c6e4ccf5f5651aba6ac73667265657261646975732d332e302e3133
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0x1010a47b1019be78c762286715e03979
(7) eap_peap: Got tunneled reply code 11
(7) eap_peap:   EAP-Message = 0x0109002b1a01090026102555ff5f1f4c6e4ccf5f5651aba6ac73667265657261646975732d332e302e3133
(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap:   State = 0x1010a47b1019be78c762286715e03979
(7) eap_peap: Got tunneled reply RADIUS code 11
(7) eap_peap:   EAP-Message = 0x0109002b1a01090026102555ff5f1f4c6e4ccf5f5651aba6ac73667265657261646975732d332e302e3133
(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap:   State = 0x1010a47b1019be78c762286715e03979
(7) eap_peap: Got tunneled Access-Challenge
(7) eap: Sending EAP Request (code 1) ID 9 length 74
(7) eap: EAP session adding &reply:State = 0xa07fc9dca776d0e6
(7)     [eap] = handled
(7)   } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) # Executing group from file /etc/raddb/sites-enabled/default
(7)   Challenge { ... } # empty sub-section is ignored
(7) Sent Access-Challenge Id 85 from 192.168.49.23:1812 to 192.168.48.16:58562 length 0
(7)   EAP-Message = 0x0109004a1900170303003f192ab2f252f3b0b7dcd4651c05a4d2833a0c629f344641dd33b5a87c6b28329c49354c7760be8b9fda5086c759aada5b044ed2a0c42dffd5d13d87dc46cf1e
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0xa07fc9dca776d0e680005dbd51042520
(7) Finished request
Waking up in 4.7 seconds.
(8) Received Access-Request Id 86 from 192.168.48.16:58562 to 192.168.49.23:1812 length 318
(8)   User-Name = "tom.yates"
(8)   NAS-IP-Address = 192.168.48.16
(8)   NAS-Port = 0
(8)   NAS-Identifier = "192.168.48.16"
(8)   NAS-Port-Type = Wireless-802.11
(8)   Calling-Station-Id = "185e0f77d68e"
(8)   Called-Station-Id = "f42e7fc2e520"
(8)   Service-Type = Framed-User
(8)   Framed-MTU = 1100
(8)   EAP-Message = 0x02090063190017030300587feab33215d6773f18a06314afbe1bf9a1a44702aa0d036ebeca4a65a00acbc9c8a6a83fb6099a205483f2ecb7ee46de4626b98f0f84c971d633423c544d0db6847a8850fa3d3aac2252f5b113d6268332029d5b4c1381d7
(8)   State = 0xa07fc9dca776d0e680005dbd51042520
(8)   Aruba-Essid-Name = "fangorn2"
(8)   Aruba-Location-Id = "f4:2e:7f:c2:e5:20"
(8)   Aruba-AP-Group = "SetMeUp-C3:01:F8"
(8)   Aruba-Device-Type = "NOFP"
(8)   Message-Authenticator = 0x342d08093015e212d905c371421c0e02
(8) session-state: No cached attributes
(8) # Executing section authorize from file /etc/raddb/sites-enabled/default
(8)   authorize {
(8)     policy filter_username {
(8)       if (&User-Name) {
(8)       if (&User-Name)  -> TRUE
(8)       if (&User-Name)  {
(8)         if (&User-Name =~ / /) {
(8)         if (&User-Name =~ / /)  -> FALSE
(8)         if (&User-Name =~ /@[^@]*@/ ) {
(8)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)         if (&User-Name =~ /\.\./ ) {
(8)         if (&User-Name =~ /\.\./ )  -> FALSE
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(8)         if (&User-Name =~ /\.$/)  {
(8)         if (&User-Name =~ /\.$/)   -> FALSE
(8)         if (&User-Name =~ /@\./)  {
(8)         if (&User-Name =~ /@\./)   -> FALSE
(8)       } # if (&User-Name)  = notfound
(8)     } # policy filter_username = notfound
(8)     [preprocess] = ok
(8)     [chap] = noop
(8)     [mschap] = noop
(8)     [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL
(8) suffix: No such realm "NULL"
(8)     [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 9 length 99
(8) eap: Continuing tunnel setup
(8)     [eap] = ok
(8)   } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/raddb/sites-enabled/default
(8)   authenticate {
(8) eap: Expiring EAP session with state 0x1010a47b1019be78
(8) eap: Finished EAP session with state 0xa07fc9dca776d0e6
(8) eap: Previous EAP request found for state 0xa07fc9dca776d0e6, released from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: Continuing EAP-TLS
(8) eap_peap: [eaptls verify] = ok
(8) eap_peap: Done initial handshake
(8) eap_peap: [eaptls process] = ok
(8) eap_peap: Session established.  Decoding tunneled attributes
(8) eap_peap: PEAP state phase2
(8) eap_peap: EAP method MSCHAPv2 (26)
(8) eap_peap: Got tunneled request
(8) eap_peap:   EAP-Message = 0x020900441a0209003f3102bfec60e2b54b220e3a4b660efad107000000000000000060b848ff1a1043ef4b55474a96318af7e165fac06373760100746f6d2e7961746573
(8) eap_peap: Setting User-Name to tom.yates
(8) eap_peap: Sending tunneled request to inner-tunnel
(8) eap_peap:   EAP-Message = 0x020900441a0209003f3102bfec60e2b54b220e3a4b660efad107000000000000000060b848ff1a1043ef4b55474a96318af7e165fac06373760100746f6d2e7961746573
(8) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(8) eap_peap:   User-Name = "tom.yates"
(8) eap_peap:   State = 0x1010a47b1019be78c762286715e03979
(8) Virtual server inner-tunnel received request
(8)   EAP-Message = 0x020900441a0209003f3102bfec60e2b54b220e3a4b660efad107000000000000000060b848ff1a1043ef4b55474a96318af7e165fac06373760100746f6d2e7961746573
(8)   FreeRADIUS-Proxied-To = 127.0.0.1
(8)   User-Name = "tom.yates"
(8)   State = 0x1010a47b1019be78c762286715e03979
(8) WARNING: Outer and inner identities are the same.  User privacy is compromised.
(8) server inner-tunnel {
(8)   session-state: No cached attributes
(8)   # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel
(8)     authorize {
(8)       policy filter_username {
(8)         if (&User-Name) {
(8)         if (&User-Name)  -> TRUE
(8)         if (&User-Name)  {
(8)           if (&User-Name =~ / /) {
(8)           if (&User-Name =~ / /)  -> FALSE
(8)           if (&User-Name =~ /@[^@]*@/ ) {
(8)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)           if (&User-Name =~ /\.\./ ) {
(8)           if (&User-Name =~ /\.\./ )  -> FALSE
(8)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(8)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(8)           if (&User-Name =~ /\.$/)  {
(8)           if (&User-Name =~ /\.$/)   -> FALSE
(8)           if (&User-Name =~ /@\./)  {
(8)           if (&User-Name =~ /@\./)   -> FALSE
(8)         } # if (&User-Name)  = notfound
(8)       } # policy filter_username = notfound
(8)       [chap] = noop
(8)       [mschap] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL
(8) suffix: No such realm "NULL"
(8)       [suffix] = noop
(8)       update control {
(8)         &Proxy-To-Realm := LOCAL
(8)       } # update control = noop
(8) eap: Peer sent EAP Response (code 2) ID 9 length 68
(8) eap: No EAP Start, assuming it's an on-going EAP conversation
(8)       [eap] = updated
(8) files: users: Matched entry tom.yates at line 95
(8)       [files] = ok
(8)       [expiration] = noop
(8)       [logintime] = noop
(8) pap: WARNING: Auth-Type already set.  Not setting to PAP
(8)       [pap] = noop
(8)     } # authorize = updated
(8)   Found Auth-Type = eap
(8)   # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(8)     authenticate {
(8) eap: Expiring EAP session with state 0x1010a47b1019be78
(8) eap: Finished EAP session with state 0x1010a47b1019be78
(8) eap: Previous EAP request found for state 0x1010a47b1019be78, released from the list
(8) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(8) eap: Calling submodule eap_mschapv2 to process data
(8) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(8) eap_mschapv2:   authenticate {
(8) mschap: Found Cleartext-Password, hashing to create NT-Password
(8) mschap: Found Cleartext-Password, hashing to create LM-Password
(8) mschap: Creating challenge hash with username: tom.yates
(8) mschap: Client is using MS-CHAPv2
(8) mschap: Adding MS-CHAPv2 MPPE keys
(8)     [mschap] = ok
(8)   } # authenticate = ok
(8) MSCHAP Success
(8) eap: Sending EAP Request (code 1) ID 10 length 51
(8) eap: EAP session adding &reply:State = 0x1010a47b111abe78
(8)       [eap] = handled
(8)     } # authenticate = handled
(8) } # server inner-tunnel
(8) Virtual server sending reply
(8)   Tunnel-Type = VLAN
(8)   Tunnel-Medium-Type = IEEE-802
(8)   Tunnel-Private-Group-Id = "55"
(8)   EAP-Message = 0x010a00331a0309002e533d46423644413436414234463542353534344132444245324141333442423445343242374142313334
(8)   Message-Authenticator = 0x00000000000000000000000000000000
(8)   State = 0x1010a47b111abe78c762286715e03979
(8) eap_peap: Got tunneled reply code 11
(8) eap_peap:   Tunnel-Type = VLAN
(8) eap_peap:   Tunnel-Medium-Type = IEEE-802
(8) eap_peap:   Tunnel-Private-Group-Id = "55"
(8) eap_peap:   EAP-Message = 0x010a00331a0309002e533d46423644413436414234463542353534344132444245324141333442423445343242374142313334
(8) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap:   State = 0x1010a47b111abe78c762286715e03979
(8) eap_peap: Got tunneled reply RADIUS code 11
(8) eap_peap:   Tunnel-Type = VLAN
(8) eap_peap:   Tunnel-Medium-Type = IEEE-802
(8) eap_peap:   Tunnel-Private-Group-Id = "55"
(8) eap_peap:   EAP-Message = 0x010a00331a0309002e533d46423644413436414234463542353534344132444245324141333442423445343242374142313334
(8) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap:   State = 0x1010a47b111abe78c762286715e03979
(8) eap_peap: Got tunneled Access-Challenge
(8) eap: Sending EAP Request (code 1) ID 10 length 82
(8) eap: EAP session adding &reply:State = 0xa07fc9dca875d0e6
(8)     [eap] = handled
(8)   } # authenticate = handled
(8) Using Post-Auth-Type Challenge
(8) # Executing group from file /etc/raddb/sites-enabled/default
(8)   Challenge { ... } # empty sub-section is ignored
(8) Sent Access-Challenge Id 86 from 192.168.49.23:1812 to 192.168.48.16:58562 length 0
(8)   EAP-Message = 0x010a005219001703030047192ab2f252f3b0b83b40277c289ef2e5943ac708faf5bcff67a204d848ea9c3f83a4942708fca40a52d98ad9e74bfddfbcde12f872c230224ed3d43e36cd12a9db6cadee57bc60
(8)   Message-Authenticator = 0x00000000000000000000000000000000
(8)   State = 0xa07fc9dca875d0e680005dbd51042520
(8) Finished request
Waking up in 4.7 seconds.
(9) Received Access-Request Id 87 from 192.168.48.16:58562 to 192.168.49.23:1812 length 256
(9)   User-Name = "tom.yates"
(9)   NAS-IP-Address = 192.168.48.16
(9)   NAS-Port = 0
(9)   NAS-Identifier = "192.168.48.16"
(9)   NAS-Port-Type = Wireless-802.11
(9)   Calling-Station-Id = "185e0f77d68e"
(9)   Called-Station-Id = "f42e7fc2e520"
(9)   Service-Type = Framed-User
(9)   Framed-MTU = 1100
(9)   EAP-Message = 0x020a00251900170303001a7feab33215d67740011325d1bec9932e8a5fdc2392caa4aaadb6
(9)   State = 0xa07fc9dca875d0e680005dbd51042520
(9)   Aruba-Essid-Name = "fangorn2"
(9)   Aruba-Location-Id = "f4:2e:7f:c2:e5:20"
(9)   Aruba-AP-Group = "SetMeUp-C3:01:F8"
(9)   Aruba-Device-Type = "NOFP"
(9)   Message-Authenticator = 0x7ac9d99eb1cb786653df67edf2d07365
(9) session-state: No cached attributes
(9) # Executing section authorize from file /etc/raddb/sites-enabled/default
(9)   authorize {
(9)     policy filter_username {
(9)       if (&User-Name) {
(9)       if (&User-Name)  -> TRUE
(9)       if (&User-Name)  {
(9)         if (&User-Name =~ / /) {
(9)         if (&User-Name =~ / /)  -> FALSE
(9)         if (&User-Name =~ /@[^@]*@/ ) {
(9)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(9)         if (&User-Name =~ /\.\./ ) {
(9)         if (&User-Name =~ /\.\./ )  -> FALSE
(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(9)         if (&User-Name =~ /\.$/)  {
(9)         if (&User-Name =~ /\.$/)   -> FALSE
(9)         if (&User-Name =~ /@\./)  {
(9)         if (&User-Name =~ /@\./)   -> FALSE
(9)       } # if (&User-Name)  = notfound
(9)     } # policy filter_username = notfound
(9)     [preprocess] = ok
(9)     [chap] = noop
(9)     [mschap] = noop
(9)     [digest] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL
(9) suffix: No such realm "NULL"
(9)     [suffix] = noop
(9) eap: Peer sent EAP Response (code 2) ID 10 length 37
(9) eap: Continuing tunnel setup
(9)     [eap] = ok
(9)   } # authorize = ok
(9) Found Auth-Type = eap
(9) # Executing group from file /etc/raddb/sites-enabled/default
(9)   authenticate {
(9) eap: Expiring EAP session with state 0x1010a47b111abe78
(9) eap: Finished EAP session with state 0xa07fc9dca875d0e6
(9) eap: Previous EAP request found for state 0xa07fc9dca875d0e6, released from the list
(9) eap: Peer sent packet with method EAP PEAP (25)
(9) eap: Calling submodule eap_peap to process data
(9) eap_peap: Continuing EAP-TLS
(9) eap_peap: [eaptls verify] = ok
(9) eap_peap: Done initial handshake
(9) eap_peap: [eaptls process] = ok
(9) eap_peap: Session established.  Decoding tunneled attributes
(9) eap_peap: PEAP state phase2
(9) eap_peap: EAP method MSCHAPv2 (26)
(9) eap_peap: Got tunneled request
(9) eap_peap:   EAP-Message = 0x020a00061a03
(9) eap_peap: Setting User-Name to tom.yates
(9) eap_peap: Sending tunneled request to inner-tunnel
(9) eap_peap:   EAP-Message = 0x020a00061a03
(9) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(9) eap_peap:   User-Name = "tom.yates"
(9) eap_peap:   State = 0x1010a47b111abe78c762286715e03979
(9) Virtual server inner-tunnel received request
(9)   EAP-Message = 0x020a00061a03
(9)   FreeRADIUS-Proxied-To = 127.0.0.1
(9)   User-Name = "tom.yates"
(9)   State = 0x1010a47b111abe78c762286715e03979
(9) WARNING: Outer and inner identities are the same.  User privacy is compromised.
(9) server inner-tunnel {
(9)   session-state: No cached attributes
(9)   # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel
(9)     authorize {
(9)       policy filter_username {
(9)         if (&User-Name) {
(9)         if (&User-Name)  -> TRUE
(9)         if (&User-Name)  {
(9)           if (&User-Name =~ / /) {
(9)           if (&User-Name =~ / /)  -> FALSE
(9)           if (&User-Name =~ /@[^@]*@/ ) {
(9)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(9)           if (&User-Name =~ /\.\./ ) {
(9)           if (&User-Name =~ /\.\./ )  -> FALSE
(9)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(9)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(9)           if (&User-Name =~ /\.$/)  {
(9)           if (&User-Name =~ /\.$/)   -> FALSE
(9)           if (&User-Name =~ /@\./)  {
(9)           if (&User-Name =~ /@\./)   -> FALSE
(9)         } # if (&User-Name)  = notfound
(9)       } # policy filter_username = notfound
(9)       [chap] = noop
(9)       [mschap] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL
(9) suffix: No such realm "NULL"
(9)       [suffix] = noop
(9)       update control {
(9)         &Proxy-To-Realm := LOCAL
(9)       } # update control = noop
(9) eap: Peer sent EAP Response (code 2) ID 10 length 6
(9) eap: No EAP Start, assuming it's an on-going EAP conversation
(9)       [eap] = updated
(9) files: users: Matched entry tom.yates at line 95
(9)       [files] = ok
(9)       [expiration] = noop
(9)       [logintime] = noop
(9) pap: WARNING: Auth-Type already set.  Not setting to PAP
(9)       [pap] = noop
(9)     } # authorize = updated
(9)   Found Auth-Type = eap
(9)   # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(9)     authenticate {
(9) eap: Expiring EAP session with state 0x1010a47b111abe78
(9) eap: Finished EAP session with state 0x1010a47b111abe78
(9) eap: Previous EAP request found for state 0x1010a47b111abe78, released from the list
(9) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(9) eap: Calling submodule eap_mschapv2 to process data
(9) eap: Sending EAP Success (code 3) ID 10 length 4
(9) eap: Freeing handler
(9)       [eap] = ok
(9)     } # authenticate = ok
(9)   # Executing section post-auth from file /etc/raddb/sites-enabled/inner-tunnel
(9)     post-auth {
(9)       if (0) {
(9)       if (0)  -> FALSE
(9)     } # post-auth = noop
(9)   Login OK: [tom.yates] (from client private-network-1 port 0 via TLS tunnel)
(9) } # server inner-tunnel
(9) Virtual server sending reply
(9)   Tunnel-Type = VLAN
(9)   Tunnel-Medium-Type = IEEE-802
(9)   Tunnel-Private-Group-Id = "55"
(9)   MS-MPPE-Encryption-Policy = Encryption-Allowed
(9)   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(9)   MS-MPPE-Send-Key = 0xb41ba4f39e9aed70cda43fecdaf4e9f5
(9)   MS-MPPE-Recv-Key = 0x1b673054a7d732aae1658862d26342d4
(9)   EAP-Message = 0x030a0004
(9)   Message-Authenticator = 0x00000000000000000000000000000000
(9)   User-Name = "tom.yates"
(9) eap_peap: Got tunneled reply code 2
(9) eap_peap:   Tunnel-Type = VLAN
(9) eap_peap:   Tunnel-Medium-Type = IEEE-802
(9) eap_peap:   Tunnel-Private-Group-Id = "55"
(9) eap_peap:   MS-MPPE-Encryption-Policy = Encryption-Allowed
(9) eap_peap:   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(9) eap_peap:   MS-MPPE-Send-Key = 0xb41ba4f39e9aed70cda43fecdaf4e9f5
(9) eap_peap:   MS-MPPE-Recv-Key = 0x1b673054a7d732aae1658862d26342d4
(9) eap_peap:   EAP-Message = 0x030a0004
(9) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(9) eap_peap:   User-Name = "tom.yates"
(9) eap_peap: Got tunneled reply RADIUS code 2
(9) eap_peap:   Tunnel-Type = VLAN
(9) eap_peap:   Tunnel-Medium-Type = IEEE-802
(9) eap_peap:   Tunnel-Private-Group-Id = "55"
(9) eap_peap:   MS-MPPE-Encryption-Policy = Encryption-Allowed
(9) eap_peap:   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(9) eap_peap:   MS-MPPE-Send-Key = 0xb41ba4f39e9aed70cda43fecdaf4e9f5
(9) eap_peap:   MS-MPPE-Recv-Key = 0x1b673054a7d732aae1658862d26342d4
(9) eap_peap:   EAP-Message = 0x030a0004
(9) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(9) eap_peap:   User-Name = "tom.yates"
(9) eap_peap: Tunneled authentication was successful
(9) eap_peap: SUCCESS
(9) eap: Sending EAP Request (code 1) ID 11 length 46
(9) eap: EAP session adding &reply:State = 0xa07fc9dca974d0e6
(9)     [eap] = handled
(9)   } # authenticate = handled
(9) Using Post-Auth-Type Challenge
(9) # Executing group from file /etc/raddb/sites-enabled/default
(9)   Challenge { ... } # empty sub-section is ignored
(9) Sent Access-Challenge Id 87 from 192.168.49.23:1812 to 192.168.48.16:58562 length 0
(9)   EAP-Message = 0x010b002e19001703030023192ab2f252f3b0b92bee3e821ba06baaa365106eed7f1b5c8c0d55f2a6159a04928c3e
(9)   Message-Authenticator = 0x00000000000000000000000000000000
(9)   State = 0xa07fc9dca974d0e680005dbd51042520
(9) Finished request
Waking up in 4.6 seconds.
(10) Received Access-Request Id 88 from 192.168.48.16:58562 to 192.168.49.23:1812 length 265
(10)   User-Name = "tom.yates"
(10)   NAS-IP-Address = 192.168.48.16
(10)   NAS-Port = 0
(10)   NAS-Identifier = "192.168.48.16"
(10)   NAS-Port-Type = Wireless-802.11
(10)   Calling-Station-Id = "185e0f77d68e"
(10)   Called-Station-Id = "f42e7fc2e520"
(10)   Service-Type = Framed-User
(10)   Framed-MTU = 1100
(10)   EAP-Message = 0x020b002e190017030300237feab33215d677410320d1f109b7b865f5e84c2f30427e677eae455549d6cf4074c656
(10)   State = 0xa07fc9dca974d0e680005dbd51042520
(10)   Aruba-Essid-Name = "fangorn2"
(10)   Aruba-Location-Id = "f4:2e:7f:c2:e5:20"
(10)   Aruba-AP-Group = "SetMeUp-C3:01:F8"
(10)   Aruba-Device-Type = "NOFP"
(10)   Message-Authenticator = 0x830e1fd5d6ce06ee1fa99eaf88f42bd5
(10) session-state: No cached attributes
(10) # Executing section authorize from file /etc/raddb/sites-enabled/default
(10)   authorize {
(10)     policy filter_username {
(10)       if (&User-Name) {
(10)       if (&User-Name)  -> TRUE
(10)       if (&User-Name)  {
(10)         if (&User-Name =~ / /) {
(10)         if (&User-Name =~ / /)  -> FALSE
(10)         if (&User-Name =~ /@[^@]*@/ ) {
(10)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(10)         if (&User-Name =~ /\.\./ ) {
(10)         if (&User-Name =~ /\.\./ )  -> FALSE
(10)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(10)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(10)         if (&User-Name =~ /\.$/)  {
(10)         if (&User-Name =~ /\.$/)   -> FALSE
(10)         if (&User-Name =~ /@\./)  {
(10)         if (&User-Name =~ /@\./)   -> FALSE
(10)       } # if (&User-Name)  = notfound
(10)     } # policy filter_username = notfound
(10)     [preprocess] = ok
(10)     [chap] = noop
(10)     [mschap] = noop
(10)     [digest] = noop
(10) suffix: Checking for suffix after "@"
(10) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL
(10) suffix: No such realm "NULL"
(10)     [suffix] = noop
(10) eap: Peer sent EAP Response (code 2) ID 11 length 46
(10) eap: Continuing tunnel setup
(10)     [eap] = ok
(10)   } # authorize = ok
(10) Found Auth-Type = eap
(10) # Executing group from file /etc/raddb/sites-enabled/default
(10)   authenticate {
(10) eap: Expiring EAP session with state 0xa07fc9dca974d0e6
(10) eap: Finished EAP session with state 0xa07fc9dca974d0e6
(10) eap: Previous EAP request found for state 0xa07fc9dca974d0e6, released from the list
(10) eap: Peer sent packet with method EAP PEAP (25)
(10) eap: Calling submodule eap_peap to process data
(10) eap_peap: Continuing EAP-TLS
(10) eap_peap: [eaptls verify] = ok
(10) eap_peap: Done initial handshake
(10) eap_peap: [eaptls process] = ok
(10) eap_peap: Session established.  Decoding tunneled attributes
(10) eap_peap: PEAP state send tlv success
(10) eap_peap: Received EAP-TLV response
(10) eap_peap: Success
(10) eap: Sending EAP Success (code 3) ID 11 length 4
(10) eap: Freeing handler
(10)     [eap] = ok
(10)   } # authenticate = ok
(10) # Executing section post-auth from file /etc/raddb/sites-enabled/default
(10)   post-auth {
(10)     update {
(10)       No attributes updated
(10)     } # update = noop
(10)     [exec] = noop
(10)     policy remove_reply_message_if_eap {
(10)       if (&reply:EAP-Message && &reply:Reply-Message) {
(10)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(10)       else {
(10)         [noop] = noop
(10)       } # else = noop
(10)     } # policy remove_reply_message_if_eap = noop
(10)   } # post-auth = noop
(10) Login OK: [tom.yates] (from client private-network-1 port 0 cli 185e0f77d68e)
(10) Sent Access-Accept Id 88 from 192.168.49.23:1812 to 192.168.48.16:58562 length 0
(10)   MS-MPPE-Recv-Key = 0xaf37ad058d86f225bdba2cfb636db21bd1f198057e913e3a7abe65337a2c699b
(10)   MS-MPPE-Send-Key = 0x3fb04d03dcdda495bdbbf3dd9797619ee760414d40f1e818553a6290f3c2f362
(10)   EAP-Message = 0x030b0004
(10)   Message-Authenticator = 0x00000000000000000000000000000000
(10)   User-Name = "tom.yates"
(10) Finished request
Waking up in 4.6 seconds.
(0) Cleaning up request packet ID 78 with timestamp +13
(1) Cleaning up request packet ID 79 with timestamp +13
(2) Cleaning up request packet ID 80 with timestamp +13
(3) Cleaning up request packet ID 81 with timestamp +14
(4) Cleaning up request packet ID 82 with timestamp +14
(5) Cleaning up request packet ID 83 with timestamp +14
(6) Cleaning up request packet ID 84 with timestamp +14
(7) Cleaning up request packet ID 85 with timestamp +14
(8) Cleaning up request packet ID 86 with timestamp +14
(9) Cleaning up request packet ID 87 with timestamp +14
(10) Cleaning up request packet ID 88 with timestamp +14
Ready to process requests

-- 

   Tom Yates  -  http://www.teaparty.net