Hi Fajar and Alan, am still having a challenge and seeking your guidance, i have this account in my users file as shown below; reporter@utmax Cleartext-Password := "atom" Service-Type = Framed-User, Framed-Protocol = PPP, Framed-Address = 255.255.255.254, Framed-Netmask = 255.255.255.255, Fall-Through = 0 However, client still can not connect and this is the log below, what could be the issue? rad_recv: Access-Request packet from host 196.0.4.18 port 1812, id=249, length=189 User-Name = "reporter@utmax" NAS-IP-Address = 192.168.224.70 Calling-Station-Id = "0c4c39b782dd" NAS-Identifier = "WASN9770" Event-Timestamp = "Mar 6 2012 14:33:06 EAT" EAP-Message = 0x02010013017265706f727465724075746d6178 WiMAX-Release = "1.1" WiMAX-Accounting-Capabilities = Flow-Based WiMAX-BS-Id = 0x303030303038303366633230 WiMAX-GMT-Timezone-offset = 10800 NAS-Port-Type = Wireless-802.16 WiMAX-Available-In-Client = 3 Service-Type = Framed-User Message-Authenticator = 0xc547707138b93ae18c61dc60ebd63974 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /usr/local/var/log/radius/radacct/196.0.4.18/auth-detail-20120306 [auth_log] /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/196.0.4.18/auth-detail-20120306 [auth_log] expand: %t -> Tue Mar 6 14:18:26 2012 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop ++[wimax] returns ok [suffix] Looking up realm "utmax" for User-Name = "reporter@utmax" [suffix] Found realm "utmax" [suffix] Adding Realm = "utmax" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 1 length 19 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [files] users: Matched entry reporter@utmax at line 134 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 249 to 196.0.4.18 port 1812 Service-Type = Framed-User Framed-Protocol = PPP Framed-Address = 255.255.255.254 Framed-Netmask = 255.255.255.255 EAP-Message = 0x0102001604105bb61822dad6bbb70866f6e6fd6800b5 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xdfea5fdcdfe85b2a10496a6255f7cdae Finished request 33 Eric M ________________________________ From: Fajar A. Nugraha <list@fajar.net> To: FreeRadius users mailing list <freeradius-users@lists.freeradius.org> Sent: Tuesday, March 6, 2012 1:10 PM Subject: Re: Wimax with Free radius On Tue, Mar 6, 2012 at 4:11 PM, Alan DeKok <aland@deployingradius.com> wrote:
Mulindwa wrote:
So far looks good only that users are not authenticating yet.
You cannot set "Auth-Type := Accept" for WiMAX connections. It won't work. It's impossible.
Ooops. My bad. Wiki updated. -- Fajar - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html