Hi all, Thanks for the reply. i was just missing " ". Well another problem here.. i have defined a priv level 7 in the switch. ran the following commands. privilege configure level 7 snmp-server host privilege configure level 7 snmp-server enable privilege configure level 7 snmp-server privilege exec level 7 ping ! But still the user is able to run all the commands. here is my user file conf user Auth-Type :=Local, User-Password == "user" Service-Type = NAS-Prompt-User, Login-Service = ssh, Cisco-avpair = "Shell:priv-lvl=7" On 7/19/07, freeradius-users-request@lists.freeradius.org < freeradius-users-request@lists.freeradius.org> wrote:
Send Freeradius-Users mailing list submissions to freeradius-users@lists.freeradius.org
To subscribe or unsubscribe via the World Wide Web, visit http://lists.freeradius.org/mailman/listinfo/freeradius-users or, via email, send a message with subject or body 'help' to freeradius-users-request@lists.freeradius.org
You can reach the person managing the list at freeradius-users-owner@lists.freeradius.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of Freeradius-Users digest..."
Today's Topics:
1. Problem in EAP-TLS Authentication (Govardhana K N) 2. Re: Quirky question about rewriting usernames (Pshem Kowalczyk) 3. Support for Cisco (ashish verma) 4. Re: Support for Cisco (tnt@kalik.co.yu) 5. Re: Support for Cisco (Peter Nixon)
----------------------------------------------------------------------
Message: 1 Date: Thu, 19 Jul 2007 10:36:28 +0530 From: "Govardhana K N" <govardhan.nagarajaiah@gmail.com> Subject: Problem in EAP-TLS Authentication To: FreeRadius <freeradius-users@lists.freeradius.org> Message-ID: <5f382300707182206k616c02f6ude7fb5e71976dbe9@mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1"
Hi,
I was trying to configure EAP with TLS/TTlS. After enabling TLS/TTLS in " eap.conf", I tried sending an Radius Access-Request with EAP-Identitye response. The Server is crashing becoz of segmentation fault. The debug lod from the server is given below.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- cheux301:/etc/freeradius# freeradius -X Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/freeradius/proxy.conf Config: including file: /etc/freeradius/clients.conf Config: including file: /etc/freeradius/snmp.conf Config: including file: /etc/freeradius/eap.conf Config: including file: /etc/freeradius/sql.conf main: prefix = "/usr" main: localstatedir = "/var" main: logdir = "/var/log/freeradius" main: libdir = "/usr/lib/freeradius:/usr/local/lib" main: radacctdir = "/var/log/freeradius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = yes main: log_file = "/var/log/freeradius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/var/run/freeradius/freeradius.pid" main: bind_address = 127.0.0.1 IP address [127.0.0.1] main: user = "freerad" main: group = "freerad" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = no proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib/freeradius:/usr/local/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = yes mschap: require_strong = yes mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "/etc/passwd" unix: shadow = "/etc/shadow" unix: group = "/etc/group" unix: radwtmp = "/var/log/freeradius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "md5" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/etc/freeradius/certs/cert-srv.pem" tls: certificate_file = "/etc/freeradius/certs/cert-srv.pem" tls: CA_file = "/etc/freeradius/certs/demoCA/cacert.pem" tls: private_key_password = "whatever" tls: dh_file = "/etc/freeradius/certs/dh" tls: random_file = "/etc/freeradius/certs/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = yes tls: check_cert_cn = "%{User-Name}" tls: cipher_list = "DEFAULT" tls: check_cert_issuer = "/C=GB/ST=Berkshire/L=Newbury/O=My Company Ltd" rlm_eap_tls: Loading the certificate file as a chain rlm_eap: Loaded and initialized type tls ttls: default_eap_type = "md5" ttls: copy_request_to_tunnel = no ttls: use_tunneled_reply = no rlm_eap: Loaded and initialized type ttls mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/etc/freeradius/huntgroups" preprocess: hints = "/etc/freeradius/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no preprocess: with_alvarion_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/etc/freeradius/users" files: acctusersfile = "/etc/freeradius/acct_users" files: preproxy_usersfile = "/etc/freeradius/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/var/log/freeradius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication 127.0.0.1:1812 Listening on accounting 127.0.0.1:1813 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1:32823, id=217, length=95 User-Name = "jrc" NAS-Identifier = "jrcnas" NAS-Port-Type = Ethernet CUI = "0" Service-Type = Framed-User Framed-MTU = 1400 Calling-Station-Id = "1:1:1:1:1:1" Message-Authenticator = 0x2568987af6f31763f9199f8067fafee1 EAP-Message = 0x02d20008016a7263 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 Segmentation fault cheux301:/etc/freeradius#
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-- Thanks & Regards, Govardhana K N