Freeradius 3.0.4. Parse error (check) for entry user1: Unknown value 'ntlm_auth' for attribute 'Auth-Type'

1 Sep 2016

      Hi,
I just made a fresh install of a freeradius server 3.0.4 and i want to test
the ntlm_auth module.

It's a new installation with only 3 changes made:
1) Added ntlm_auth at the begining of the authenticate section of the
default:
authenticate {
        ntlm_auth
        #
        #  PAP authentication, when a back-end database listed
        #  in the 'authorize' section supplies a password.  The
        #  password can be clear-text, or encrypted.
        Auth-Type PAP {
                pap
        }

        ........

2) Added ntlm_auth at the begining of the authenticate section of the
inner-tunnel:
authenticate {
        ntlm_auth
        #
        #  PAP authentication, when a back-end database listed
        #  in the 'authorize' section supplies a password.  The
        #  password can be clear-text, or encrypted.
        Auth-Type PAP {
                pap
        }

        ........

3) Added a user at the begining of the users file:
user1 Auth-Type := ntlm_auth, NAS-IP-Address == 127.0.0.1,
        Service-Type = Login-User,

When I try to start the radius server the next error is shown:
reading pairlist file /etc/raddb/mods-config/files/authorize
/etc/raddb/mods-config/files/authorize[46]: Parse error (check) for entry
user1: Unknown value 'ntlm_auth' for attribute 'Auth-Type'
Failed reading /etc/raddb/mods-config/files/authorize
/etc/raddb/mods-enabled/files[9]: Instantiation failed for module "files"

Here is a copy of the messages showed by radiusd -X:
radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu, built
on Dec 28 2014 at 07:00:16
Copyright (C) 1999-2014 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/utf8
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/operator-name
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
 security {
        user = "radiusd"
        group = "radiusd"
        allow_core_dumps = no
 }
}
main {
        name = "radiusd"
        prefix = "/usr"
        localstatedir = "/var"
        sbindir = "/usr/sbin"
        logdir = "/var/log/radius"
        run_dir = "/var/run/radiusd"
        libdir = "/usr/lib64/freeradius"
        radacctdir = "/var/log/radius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 1024
        pidfile = "/var/run/radiusd/radiusd.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
        colourise = yes
        msg_denied = "You are already logged in - access denied"
 }
 security {
        max_attributes = 200
        reject_delay = 1
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 home_server localhost {
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = <<< secret >>>
        response_window = 20.000000
        response_timeouts = 1
        max_outstanding = 65536
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        check_timeout = 4
        num_answers_to_alive = 3
        revive_interval = 120
  coa {
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
  }
  limit {
        max_connections = 16
        max_requests = 0
        lifetime = 0
        idle_timeout = 0
  }
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = <<< secret >>>
        nas_type = "other"
        proto = "*"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client localhost_ipv6 {
        ipv6addr = ::1
        require_message_authenticator = no
        secret = <<< secret >>>
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
radiusd: #### Instantiating modules ####
 instantiate {
 }
 modules {
  # Loaded module rlm_always
  # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
  always reject {
        rcode = "reject"
        simulcount = 0
        mpp = no
  }
  # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
  always fail {
        rcode = "fail"
        simulcount = 0
        mpp = no
  }
  # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
  always ok {
        rcode = "ok"
        simulcount = 0
        mpp = no
  }
  # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
  always handled {
        rcode = "handled"
        simulcount = 0
        mpp = no
  }
  # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
  always invalid {
        rcode = "invalid"
        simulcount = 0
        mpp = no
  }
  # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
  always userlock {
        rcode = "userlock"
        simulcount = 0
        mpp = no
  }
  # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
  always notfound {
        rcode = "notfound"
        simulcount = 0
        mpp = no
  }
  # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
  always noop {
        rcode = "noop"
        simulcount = 0
        mpp = no
  }
  # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
  always updated {
        rcode = "updated"
        simulcount = 0
        mpp = no
  }
  # Loaded module rlm_attr_filter
  # Instantiating module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
        filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
        key = "%{Realm}"
        relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
        filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
        key = "%{Realm}"
        relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
        filename = "/etc/raddb/mods-config/attr_filter/access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
        filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
        key = "%{User-Name}"
        relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
        filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
        key = "%{User-Name}"
        relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
  # Loaded module rlm_cache
  # Instantiating module "cache_eap" from file
/etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
        key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
        ttl = 15
        max_entries = 16384
        epoch = 0
        add_stats = no
  }
  # Loaded module rlm_chap
  # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap
  # Loaded module rlm_detail
  # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
  detail {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addre
ss}}/detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        log_packet_header = no
  }
  # Instantiating module "auth_log" from file
/etc/raddb/mods-enabled/detail.log
  detail auth_log {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addre
ss}}/auth-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        log_packet_header = no
  }
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail
output
  # Instantiating module "reply_log" from file
/etc/raddb/mods-enabled/detail.log
  detail reply_log {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addre
ss}}/reply-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        log_packet_header = no
  }
  # Instantiating module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addre
ss}}/pre-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        log_packet_header = no
  }
  # Instantiating module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addre
ss}}/post-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        log_packet_header = no
  }
  # Loaded module rlm_dhcp
  # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_digest
  # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest
  # Loaded module rlm_dynamic_clients
  # Instantiating module "dynamic_clients" from file
/etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_eap
  # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
  eap {
        default_eap_type = "md5"
        timer_expire = 60
        ignore_unknown_eap_types = no
        mod_accounting_username_bug = no
        max_sessions = 1024
  }
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
        tls = "tls-common"
   }
   tls-config tls-common {
        rsa_key_exchange = no
        dh_key_exchange = yes
        rsa_key_length = 512
        dh_key_length = 512
        verify_depth = 0
        ca_path = "/etc/raddb/certs"
        pem_file_type = yes
        private_key_file = "/etc/raddb/certs/server.pem"
        certificate_file = "/etc/raddb/certs/server.pem"
        ca_file = "/etc/raddb/certs/ca.pem"
        private_key_password = <<< secret >>>
        dh_file = "/etc/raddb/certs/dh"
        fragment_size = 1024
        include_length = yes
        check_crl = no
        cipher_list = "DEFAULT"
        ecdh_curve = "prime256v1"
    cache {
        enable = yes
        lifetime = 24
        max_entries = 255
    }
    verify {
    }
    ocsp {
        enable = no
        override_cert_url = yes
        url = "http://127.0.0.1/ocsp/"
        use_nonce = yes
        timeout = 0
        softfail = yes
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
        tls = "tls-common"
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        virtual_server = "inner-tunnel"
        include_length = yes
        require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
        tls = "tls-common"
        default_method = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
        soh = no
        require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
        with_ntdomain_hack = no
        send_error = no
   }
  # Loaded module rlm_exec
  # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo
  exec echo {
        wait = yes
        program = "/bin/echo %{User-Name}"
        input_pairs = "request"
        output_pairs = "reply"
        shell_escape = yes
  }
  # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
        timeout = 10
  }
  # Loaded module rlm_expiration
  # Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration
  # Loaded module rlm_expr
  # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr
  expr {
        safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
  }
  # Loaded module rlm_files
  # Instantiating module "files" from file /etc/raddb/mods-enabled/files
  files {
        filename = "/etc/raddb/mods-config/files/authorize"
        usersfile = "/etc/raddb/mods-config/files/authorize"
        acctusersfile = "/etc/raddb/mods-config/files/accounting"
        preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
        compat = "cistron"
  }
reading pairlist file /etc/raddb/mods-config/files/authorize
/etc/raddb/mods-config/files/authorize[46]: Parse error (check) for entry
user1: Unknown value 'ntlm_auth' for attribute 'Auth-Type'
Failed reading /etc/raddb/mods-config/files/authorize
/etc/raddb/mods-enabled/files[9]: Instantiation failed for module "files"

I have another server with Freerdius 2.1.12 and there is no problem with
that.
radiusd -X shows the next (with FreeRadius 3.0.4 I not see anything like
this):
radiusd: #### Loading Virtual Servers ####
.........
server { # from file /etc/raddb/radiusd.conf
 modules {
  Module: Creating Auth-Type = ntlm_auth
  Module: Checking authenticate {...} for more modules to load
  Module: Instantiating module "ntlm_auth" from file
/etc/raddb/modules/ntlm_auth
  exec ntlm_auth {
        wait = yes
        program = "/usr/bin/ntlm_auth --request-nt-key --domain=gtt.es
--username=%{mschap:User-Name} --password=%{User-Password}"
        input_pairs = "request"
        shell_escape = yes
  }
........

Best regards,

Rafa