Hi Geoffrey I am using Cisco 3600. In my case, I have found out the following issues with AV pairs: Call Leg 1: Cisco sends the following AV pairs to the radius server: User-Name User-Password h323-conf-id Cisco-AVPair=h323-ivr-out NAS-Port-Type cisco-nas-port NAS-Port Cisco-AVPair=interface Service-Type NAS-IP-Address Cisco expects to see the following AV pairs sent by the radius server: h323-credit-amount h323-credit-time h323-return-code Call Leg 2: Cisco sends the following AV pairs to the radius server: User-Name User-Password h323-conf-id Cisco-AVPair=h323-ivr-out Called-Station-Id Service-Type NAS-IP-Address Cisco expects to see the following AV pairs sent by the radius server: h323-credit-amount h323-credit-time h323-return-code The above AV pairs are for authenticating the user, after these two call legs, you should concern accounting the user. I think there are no AV pairs sent by the radius server for accounting, since it just waits until Cisco sends the stop packet. Of course, there are two different sets of AV pairs that are both have Acct-Status-Type=stop, but these two sets are for Call Leg 3 and 4, and they differ in one or two AV pairs from which you can determine the different call legs. Hope this information can help you. Best Ragrds Ali On 9/6/06, Geoffrey Cauchi <agcauchi@winssystems.com> wrote:
Not much mention there unfortunately. A practical example would help me most.
Thanks Gef
-----Original Message----- From: freeradius-users-bounces+agcauchi= winssystems.com@lists.freeradius.org [mailto: freeradius-users-bounces+agcauchi=winssystems.com@lists.freeradius.o rg] On Behalf Of Alan DeKok Sent: 06 September 2006 18:00 To: FreeRadius users mailing list Subject: Re: Freeradius + Cisco VoIP
"Geoffrey Cauchi" <agcauchi@winssystems.com> wrote:
Can anyone provide a sample config of the AV Pairs required by a cisco VoIP gateway to accept a user?
See the NAS documentation.
Alan DeKok. -- http://deployingradius.com - The web site of the book http://deployingradius.com/blog/ - The blog - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html