Hi, Hopefully someone has come across this before and can easily answer the question I am attempting to get an Alvarion Breezemax basestation working with FreeRadius for provisioning of services. Essentially it appears straight forward the manual provides the following info: 1 Verify that the necessary Service Profiles are available in the database of the relevant Base Station(s). 2 The Users List of the server must include the default User Name and Password of the NPU (both are KeepAliveUserNameAndPassword). 3 The format of the each Service in the ID Filter in the RADIUS Authentication server(s) is n:v:h:a:c; The ID Filter may include up to 5 Services, separated by “;”: s1;s2;... �n = Service Profile Name � v=<VLAN List>. v=<> is an empty VLAN list. � h=ON or OFF, indicating the configured Hybrid VLAN Mode. � a=<OFF or ON, VLAN ID>, indicating the configured Access VLAN Mode, and the Access VLAN ID for Access VLAN ON. � c=ON/OFF, indicating the configured VLAN Classification Mode. The first 2 are straight forward and as things stand the CPE user get authenticated by the Radius server however defining the service whatever I do cannot get it to work! The setup is just in a lab environment so the Radius server is just using the conf files no databases and in the very simple user file I have the following: username User-password == "password" Filter-id = "n=InternetAccess:v=<>:h=OFF:a=<OFF>:c=OFF;" The manual seems to point towards the filter-id but this does not work! I see in the reply-details log files that the filter-id is being sent however I then check on the Alvarion CPE and it doesn't have any Service configured. . . I have tried the alvarion-vsa-## and the the breezemax-attrb and these still make no difference! Has anyone got this working? The supposed Alvarion support is as widely reported non-existant - the two contacts I have are both on leave! Cheers in Advance Steve