Hi, I try to use FR to forwarding access-request to NPS servers, but some reason FR/NPS gives "User password is incorrect" message. I have tripple check that password is correct. When i test IAS to NPS proxy it works. I have enable in NPS side MS-CHAP-v2, MS-CHAP, CHAP and PAP/SPAP methods. Any clue what is wrong? Here is some logs: rad_recv: Access-Request packet from host 192.168.21.150 port 1025, id=57, length=154 User-Name = "vle" User-Password = "\2063\261m\301\344J\216sCÑ \035\003\2328" NAS-Port = 626688 Called-Station-Id = "192.168.21.150" Calling-Station-Id = "192.168.1.114" NAS-Port-Type = Virtual Tunnel-Client-Endpoint:0 = "192.168.1.114" NAS-IP-Address = 192.168.21.150 Cisco-AVPair = "ip:source-ip=192.168.1.114" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "vle", looking up realm NULL [suffix] Found realm "NULL" [suffix] Adding Stripped-User-Name = "vle" [suffix] Adding Realm = "NULL" [suffix] Proxying request from user vle to realm NULL [suffix] Preparing to proxy authentication request to realm "NULL" ++[suffix] returns updated [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop +- entering group pre-proxy {...} ++[files] returns noop Sending Access-Request of id 118 to 192.168.21.200 port 1812 User-Name = "vle" User-Password = "\2063\261m\301\344J\216sCÑ \035\003\2328" NAS-Port = 626688 Called-Station-Id = "192.168.21.150" Calling-Station-Id = "192.168.1.114" NAS-Port-Type = Virtual Tunnel-Client-Endpoint:0 = "192.168.1.114" NAS-IP-Address = 192.168.21.150 Cisco-AVPair = "ip:source-ip=192.168.1.114" Proxy-State = 0x3537 Proxying request 0 to home server 192.168.21.200 port 1812 Sending Access-Request of id 118 to 192.168.21.200 port 1812 User-Name = "vle" User-Password = "\2063\261m\301\344J\216sCÑ \035\003\2328" NAS-Port = 626688 Called-Station-Id = "192.168.21.150" Calling-Station-Id = "192.168.1.114" NAS-Port-Type = Virtual Tunnel-Client-Endpoint:0 = "192.168.1.114" NAS-IP-Address = 192.168.21.150 Cisco-AVPair = "ip:source-ip=192.168.1.114" Proxy-State = 0x3537 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Reject packet from host 192.168.21.200 port 1812, id=118, length=52 Proxy-State = 0x3537 Reply-Message = "User password is incorrect" Br, Ville