My full SQL statement is: accounting_stop_query = "EXEC ${stopacnt_sp} @username = '%{SQL-User-Name}', @av_pair = '%{h323-incoming-conf-id}', @gw_session_id_out = '%{Quintum-h323-conf-id}', @call_origin = '%{Quintum-h323-call-origin}', @dialstring_from = '%{Calling-Station-Id}', @dialstring_to = '%{Called-Station-Id}', @disconnect_code_hex = '%{Quintum-h323-disconnect-cause}', @session_time = '%{Acct-Session-Time}', @gw_ip = '%{NAS-IP-Address}', @gw_name = '' " 2009/11/17 Andrew Paternoster <andrew@gpk.net.au>
What operator are you using? I have multi AVPairs and i have := on the first one and += on the others working for me.
* Andrew Paternoster* Senior System Engineer
<http://www.gpk.net.au/> <http://www.gpk.net.au> 2/94 Abbott Road, Hallam, VIC 3083 *Phone:* 1300 854 223* Fax:* 1300 854 228 *www.gpk.net.au*
*Did you know that you can now log faults by just sending an email to ** support@gpk.net.au* <support@gpk.net.au>
The information contained in or accompanying this e-mail is intended only for the use of the stated recipient and may contain information that is confidential and/or privileged. If the reader is not the intended recipient or the agent thereof, you are hereby notified that any dissemination, distribution or copying of this e-mail is strictly prohibited and may constitute a breach of confidence and/or privilege. If you have received this e-mail in error, please notify us immediately. Any views or opinions presented are those solely of the author and do not necessarily represent those of GPK Computers Pty Ltd..
Warning: Although the company has taken reasonable precautions to ensure no viruses are present in this e-mail, the company cannot accept responsibility for any loss or damage arising from the use of this e-mail or attachments
*From:* freeradius-users-bounces+andrew=gpk.net.au@lists.freeradius.org[mailto: freeradius-users-bounces+andrew <freeradius-users-bounces%2Bandrew>= gpk.net.au@lists.freeradius.org] *On Behalf Of *Robert White *Sent:* Tuesday, 17 November 2009 1:05 PM *To:* FreeRadius users mailing list *Subject:* Accessing a second AV Pair
Hi,
I have a Radius message which has two AV Pairs and I want to insert them both in to a database. However, I'm unable to access the second AVPair.
Here is the Radius packet....
rad_recv: Accounting-Request packet from host 10.152.0.7 port 20001, id=87, length=662
NAS-IP-Address = 10.152.0.7
Quintum-NAS-Port = "0 7/7/24"
NAS-Port-Type = Async
User-Name = "99999999"
Called-Station-Id = "990006"
Calling-Station-Id = "1002"
Acct-Status-Type = Stop
Acct-Delay-Time = 0
Acct-Input-Octets = 0
Acct-Output-Octets = 0
Acct-Session-Id = "000000AA00000039"
Acct-Session-Time = 75
Acct-Input-Packets = 0
Acct-Output-Packets = 0
Service-Type = Login-User
Quintum-AVPair = "h323-ivr-out=ACCESSCODE:990006"
Quintum-h323-conf-id = "h323-conf-id=34623032 38616662 32630030 37333300"
Quintum-AVPair = "h323-incoming-conf-id=34623032 38616662 32630030 37333300"
Quintum-h323-gw-id = "h323-gw-id=au-syd-test1"
Quintum-h323-call-origin = "h323-call-origin=answer"
Quintum-h323-call-type = "h323-call-type=Telephony"
Quintum-h323-setup-time = "h323-setup-time=01:37:31.685 UTC Tue Nov 17 2009"
Quintum-h323-connect-time = "h323-connect-time=01:37:31.885 UTC Tue Nov 17 2009"
Quintum-h323-disconnect-time = "h323-disconnect-time=01:38:46.495 UTC Tue Nov 17 2009"
Quintum-h323-disconnect-cause = "h323-disconnect-cause=10"
Quintum-h323-voice-quality = "h323-voice-quality=0"
Quintum-Trunkid-In = "0 7/7/24"
Quintum-Trunkid-Out = "10.0.20.36"
When using the standard dictionary.quintum %{Quintum-AVPair} = h323-ivr-out=ACCESSCODE:990006. I couldn't read the second AVPair.
I did some Googling and read
"if it [the preprocess module] founds Cisco-AVPair attribute like
Cisco-AVPair = "gw-rxd-cdn=ton:0,npi:1,#:XXXXXXXX" and there's dictionary attribute gw-rxd-cdn, then it adds new attribute "gw-rxd-cdn" with value "ton:0,npi:1,#:XXXXXXXX". So if you have Cisco-AVPair attributes which you would like to insert into SQL, you need to create them in cisco dictionary."
As Quintum and Cisco are very similar I tried the same thing and edited the dictionary.quintum file adding in the following lines:
ATTRIBUTE h323-ivr-out 3000 string
ATTRIBUTE h323-incoming-conf-id 3001 string
I noted that there is already a very similar attribute for h323-incoming-conf-id - it just has the word 'Quintum' prepended to it.
However, after the dictionary edit, Radius failed to load. I got the following error:
"Errors reading dictionary: dict_init: /usr/local/share/freeradius/dictionary.quintum[53]: dict_init: /usr/local/share/freeradius/dictionary.quintum[53]:"
Am I on the right track here?
Any help appreciated.
Thanks,
Rob
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-- Rob White Assistant IT Manager Core Infrastructure & System Development Global Gossip Group Address: 14 Wentworth Avenue, Sydney NSW 2010 Telephone: +61 292 630 460 Fax: +61 292 630 404 Mobile: +61 410 700 733 Email: rwhite@globalgossip.net Skype: robwhite83