Also, what does your cleints.conf file look like. Is "johndoe" a user on your system? John -----Original Message----- From: freeradius-users-bounces+jlongland=grintek.com@lists.freeradius.org [mailto:freeradius-users-bounces+jlongland=grintek.com@lists.freeradius.org] On Behalf Of Hernan Antolini Sent: 20 November 2006 15:07 To: FreeRadius users mailing list Subject: Re: configuration problem in Freeradius. What's your "radiusd -X" say about it ?, you should start there. Hernan Antolini freeradius-users-bounces+antolini=ar.ibm.com@lists.freeradius.org wrote on 11/15/2006 08:02:26 AM:
hi ! i got howto of freeradius. I am configuring it on suse 10.1 n i have performed all steps but getting error. I tried alot to troubleshoot it but didnt get any success. So i am pasting me error here . Plz help me .
myserver:~ # radtest johndoe hello localhost 1812 password Sending Access-Request of id 151 to 127.0.0.1 port 1812
User-Name = "johndoe" User-Password = "hello" NAS-IP-Address = 255.255.255.255
NAS-Port = 1812 rad_recv: Access-Reject packet from host 127.0.0.1:1812, id=151, length=20 myserver:~ #
------------------------------------------------------------
myserver:~ # radiusd -X Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1:1025, id=151,
length=59
User-Name = "johndoe"
User-Password = "hello" NAS-IP-Address = 255.255.255.255 NAS-Port = 1812
Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "johndoe", looking up realm NULL
rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0
users: Matched entry DEFAULT at line 157 modcall[authorize]: module "files" returns ok for request 0
modcall: leaving group authorize (returns ok) for request 0 rad_check_password: Found Auth-Type System
auth: type "System"
Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0
modcall[authenticate]: module "unix" returns notfound for request 0
modcall: leaving group authenticate (returns notfound) for request 0
auth: Failed to validate the user. rad_lowerpair: User-Name now 'johndoe'
rad_lowerpair: User-Password now 'hello' rad_rmspace_pair: User-Name now 'johndoe'
rad_rmspace_pair: User-Password now 'hello'
Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "johndoe", looking up realm NULL rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 0
users: Matched entry DEFAULT at line 157 modcall[authorize]: module "files" returns ok for request 0
modcall: leaving group authorize (returns ok) for request 0
rad_check_password: Found Auth-Type System auth: type "System"
Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0
modcall[authenticate]: module "unix" returns notfound for request 0
modcall: leaving group authenticate (returns notfound) for request 0 auth: Failed to validate the user.
Delaying request 0 for 1 seconds Finished request 0 Going to the next request
--- Walking the entire request list --- Waking up in 1 seconds...
--- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list ---
Sending Access-Reject of id 151 to 127.0.0.1 port 1025 Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 151 with timestamp 455743f6 Nothing to do. Sleeping until we see a request. -- View this message in context: http://www.nabble.com/configuration- problem-in-Freeradius.-tf2627693.html#a7355750 Sent from the FreeRadius - User mailing list archive at Nabble.com.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html