So, who is the boss there - you or the machine? ;-) Right, where did you put those attributes you want returned? Can you post those entries? Any chance of posting that debug? Ivan Kalik Kalik Infprmatika ISP Dana 2/2/2008, "donaldbjames@suddenlinkmail.com" <donaldbjames@suddenlinkmail.com> piše:
That's what I would like to know. I ran freeradius in the debug mode, but I still can't figure out why freeradius is not sending the data back to the ascend data filter.
Don James
----- Original Message ----- From: "Ivan Kalik" <tnt@kalik.net> To: "FreeRadius users mailing list" <freeradius-users@lists.freeradius.org> Sent: Saturday, February 02, 2008 2:44 PM Subject: Re: ascend data filters not being returned
You havent turned anything on (including the debug). What should match so the user gets this information?
Ivan Kalik Kalik Informatika ISP
Dana 2/2/2008, "Don James" <donaldbjames@suddenlinkmail.com> piše:
Hi,
When I run radtest, I get the following response:
Sending Access-Request of id 64 to 192.168.1.41 port 1645 User-Name = "donjames@hendersonisp.com" User-Password = "donjames" NAS-IP-Address = 255.255.255.255 NAS-Port = 5 rad_recv: Access-Accept packet from host 192.168.1.41:1645, id=64, length=20
As you can see, the data from the ascend data filters is not being returned. I suspect that I have somehow turned on encryption. How do I set "plain text" communication?
Sincerely,
Don James - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html