I had already tested to set an IP, port but i have the same error. With killall freeradius too. I just built FR 2.2.4 on my os X machine and got the same error. Definitely wasn’t a freeradius process running. I’ve got Radiator running on 1812/13 and freeradius on 184/15 . In my radius config I had a listen block with ipaddr * statement. Tried starting FR 2 or 3 times with the same failure. Changed the line to be ipaddr 192.168.1.77 and away it went. the * statement worked just fine with 2.2.3 Rgds A On 17 Jan 2014, at 06:16, nicolas.clo@ricoh-industrie.fr wrote: On 16 Jan 2014, at 15:47, Nicolas CLO <nicolasclo@msn.com> wrote: > Hi list, > > Since I have updated Freeradius to v 2.2.4, the init script reports a failed start. > It tell me that address is already in use but start correctly. > > There is no port 1812 open when Freeradius is shutdown. > > The init script is the same than older version. The previous version of the server didn't report bind failures on start, as of v2.x.x Git HEAD it does. Could you provide the logs and output from the init script... Arran Cudbard-Bell <a.cudbardb@freeradius.org> FreeRADIUS Development Team FD31 3077 42EC 7FCD 32FE 5EE2 56CF 27F9 30A8 CAA2 Hi, The only log I see is into radius.log : Fri Jan 17 07:01:38 2014 : Info: Loaded virtual server inner-tunnel Fri Jan 17 07:01:38 2014 : Info: Loaded virtual server rif Fri Jan 17 07:01:38 2014 : Error: Failed binding to authentication address * port 1812: Address already in use Fri Jan 17 07:01:38 2014 : Error: /etc/freeradius/radiusd.conf[240]: Error binding to port for 0.0.0.0 port 1812 Fri Jan 17 07:01:38 2014 : Info: Ready to process requests. and when I launch the script: [FAIL] Starting FreeRADIUS daemon: freeradius failed! It's happen after a git pull on v2.x.x, freeradius -v freeradius: FreeRADIUS Version 2.2.4 (git #14e1ee7), for host i486-pc-linux-gnu, built on Jan 15 2014 at 07:08:19 If I launch freeradius -X, no errors occurs. Thanks. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html