Re: PEAP with LDAP Cleartext Password including backslash

29 Jun 2018

      With your help, authentication succeeded.

    Cleartext-Password := &My-Raw-Password

This line did not work.
Probably,it does not adapt to the following rule.

"When an attribute reference is used, both attributes must have the
same data type."

https://freeradius.org/radiusd/man/unlang.html

I changed the line seen below.

    Cleartext-Password := "%{string:control:My-Raw-Password}"

It worked well.
Are there any problems about this line?

Thank you for your help!

etokaoru

FreeRADIUS Version 3.0.17
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/local/radius3017/share/freeradius/dictionary
including dictionary file /usr/local/radius3017/share/freeradius/dictionary.dhcp
including dictionary file /usr/local/radius3017/share/freeradius/dictionary.vqp
including dictionary file /usr/local/radius3017/etc/raddb/dictionary
including configuration file /usr/local/radius3017/etc/raddb/radiusd.conf
including configuration file /usr/local/radius3017/etc/raddb/proxy.conf
including configuration file /usr/local/radius3017/etc/raddb/clients.conf
including files in directory /usr/local/radius3017/etc/raddb/mods-enabled/
including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/echo
including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/utf8
including configuration file
/usr/local/radius3017/etc/raddb/mods-enabled/cache_eap
including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/ldap
including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/digest
including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/unix
including configuration file
/usr/local/radius3017/etc/raddb/mods-enabled/attr_filter
including configuration file
/usr/local/radius3017/etc/raddb/mods-enabled/ntlm_auth
including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/detail
including configuration file
/usr/local/radius3017/etc/raddb/mods-enabled/linelog
including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/always
including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/expr
including configuration file
/usr/local/radius3017/etc/raddb/mods-enabled/sradutmp
including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/passwd
including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/exec
including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/pap
including configuration file
/usr/local/radius3017/etc/raddb/mods-enabled/detail.log
including configuration file
/usr/local/radius3017/etc/raddb/mods-enabled/expiration
including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/unpack
including configuration file
/usr/local/radius3017/etc/raddb/mods-enabled/preprocess
including configuration file
/usr/local/radius3017/etc/raddb/mods-enabled/radutmp
including configuration file
/usr/local/radius3017/etc/raddb/mods-enabled/replicate
including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/mschap
including configuration file
/usr/local/radius3017/etc/raddb/mods-enabled/dynamic_clients
including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/realm
including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/files
including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/eap
including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/soh
including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/date
including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/chap
including configuration file
/usr/local/radius3017/etc/raddb/mods-enabled/logintime
including files in directory /usr/local/radius3017/etc/raddb/policy.d/
including configuration file /usr/local/radius3017/etc/raddb/policy.d/debug
including configuration file /usr/local/radius3017/etc/raddb/policy.d/abfab-tr
including configuration file /usr/local/radius3017/etc/raddb/policy.d/dhcp
including configuration file
/usr/local/radius3017/etc/raddb/policy.d/operator-name
including configuration file /usr/local/radius3017/etc/raddb/policy.d/control
including configuration file /usr/local/radius3017/etc/raddb/policy.d/filter
including configuration file
/usr/local/radius3017/etc/raddb/policy.d/canonicalization
including configuration file
/usr/local/radius3017/etc/raddb/policy.d/moonshot-targeted-ids
including configuration file /usr/local/radius3017/etc/raddb/policy.d/cui
including configuration file /usr/local/radius3017/etc/raddb/policy.d/eap
including configuration file /usr/local/radius3017/etc/raddb/policy.d/accounting
including files in directory /usr/local/radius3017/etc/raddb/sites-enabled/
including configuration file
/usr/local/radius3017/etc/raddb/sites-enabled/default
including configuration file
/usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel
main {
 security {
  allow_core_dumps = no
 }
name = "radiusd"
prefix = "/usr/local/radius3017"
localstatedir = "/usr/local/radius3017/var"
logdir = "/usr/local/radius3017/var/log/radius"
run_dir = "/usr/local/radius3017/var/run/radiusd"
}
main {
name = "radiusd"
prefix = "/usr/local/radius3017"
localstatedir = "/usr/local/radius3017/var"
sbindir = "/usr/local/radius3017/sbin"
logdir = "/usr/local/radius3017/var/log/radius"
run_dir = "/usr/local/radius3017/var/run/radiusd"
libdir = "/usr/local/radius3017/lib"
radacctdir = "/usr/local/radius3017/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/usr/local/radius3017/var/run/radiusd/radiusd.pid"
checkrad = "/usr/local/radius3017/sbin/checkrad"
debug_level = 0
proxy_requests = yes
 log {
  stripped_names = no
  auth = yes
  auth_badpass = no
  auth_goodpass = no
  colourise = yes
  msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
  max_attributes = 200
  reject_delay = 1.000000
  status_server = yes
  allow_vulnerable_openssl = "yes"
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
  retry_delay = 5
  retry_count = 3
  default_fallback = no
  dead_time = 120
  wake_all_if_all_dead = no
 }
 home_server localhost {
  ipaddr = 127.0.0.1
  port = 1812
  type = "auth"
  secret = <<< secret >>>
  response_window = 20.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "status-server"
  ping_interval = 30
  check_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 120
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
 }
 home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
 }
 realm example.com {
auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
  ipaddr = 127.0.0.1
  require_message_authenticator = no
  secret = <<< secret >>>
  nas_type = "other"
  proto = "*"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client localhost_ipv6 {
  ipv6addr = ::1
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client all-network {
  ipaddr = 0.0.0.0/0
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
Debugger not attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = digest
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_exec
  # Loading module "echo" from file
/usr/local/radius3017/etc/raddb/mods-enabled/echo
  exec echo {
  wait = yes
  program = "/bin/echo %{User-Name}"
  input_pairs = "request"
  output_pairs = "reply"
  shell_escape = yes
  }
  # Loaded module rlm_utf8
  # Loading module "utf8" from file
/usr/local/radius3017/etc/raddb/mods-enabled/utf8
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file
/usr/local/radius3017/etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
  driver = "rlm_cache_rbtree"
  key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  ttl = 15
  max_entries = 0
  epoch = 0
  add_stats = no
  }
  # Loaded module rlm_ldap
  # Loading module "ldap" from file
/usr/local/radius3017/etc/raddb/mods-enabled/ldap
  ldap {
  server = "192.168.103.10"
  identity = "cn=root,dc=home"
  password = <<< secret >>>
   sasl {
   }
   user {
    scope = "sub"
    access_positive = yes
    sasl {
    }
   }
   group {
    filter = "(objectClass=posixGroup)"
    scope = "sub"
    name_attribute = "cn"
    membership_attribute = "memberOf"
    cacheable_name = no
    cacheable_dn = no
   }
   client {
    filter = "(objectClass=radiusClient)"
    scope = "sub"
    base_dn = "dc=home"
   }
   profile {
   }
   options {
    ldap_debug = 40
    chase_referrals = yes
    rebind = yes
    net_timeout = 1
    res_timeout = 10
    srv_timelimit = 3
    idle = 60
    probes = 3
    interval = 3
   }
   tls {
    start_tls = no
   }
  }
Creating attribute LDAP-Group
  # Loaded module rlm_digest
  # Loading module "digest" from file
/usr/local/radius3017/etc/raddb/mods-enabled/digest
  # Loaded module rlm_unix
  # Loading module "unix" from file
/usr/local/radius3017/etc/raddb/mods-enabled/unix
  unix {
  radwtmp = "/usr/local/radius3017/var/log/radius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file
/usr/local/radius3017/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  filename = "/usr/local/radius3017/etc/raddb/mods-config/attr_filter/post-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file
/usr/local/radius3017/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  filename = "/usr/local/radius3017/etc/raddb/mods-config/attr_filter/pre-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file
/usr/local/radius3017/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  filename = "/usr/local/radius3017/etc/raddb/mods-config/attr_filter/access_reject"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file
/usr/local/radius3017/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  filename = "/usr/local/radius3017/etc/raddb/mods-config/attr_filter/access_challenge"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file
/usr/local/radius3017/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  filename = "/usr/local/radius3017/etc/raddb/mods-config/attr_filter/accounting_response"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "ntlm_auth" from file
/usr/local/radius3017/etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
  wait = yes
  program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
  shell_escape = yes
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file
/usr/local/radius3017/etc/raddb/mods-enabled/detail
  detail {
  filename = "/usr/local/radius3017/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file
/usr/local/radius3017/etc/raddb/mods-enabled/linelog
  linelog {
  filename = "/usr/local/radius3017/var/log/radius/linelog"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = "This is a log message for %{User-Name}"
  reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file
/usr/local/radius3017/etc/raddb/mods-enabled/linelog
  linelog log_accounting {
  filename = "/usr/local/radius3017/var/log/radius/linelog-accounting"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = ""
  reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_always
  # Loading module "reject" from file
/usr/local/radius3017/etc/raddb/mods-enabled/always
  always reject {
  rcode = "reject"
  simulcount = 0
  mpp = no
  }
  # Loading module "fail" from file
/usr/local/radius3017/etc/raddb/mods-enabled/always
  always fail {
  rcode = "fail"
  simulcount = 0
  mpp = no
  }
  # Loading module "ok" from file
/usr/local/radius3017/etc/raddb/mods-enabled/always
  always ok {
  rcode = "ok"
  simulcount = 0
  mpp = no
  }
  # Loading module "handled" from file
/usr/local/radius3017/etc/raddb/mods-enabled/always
  always handled {
  rcode = "handled"
  simulcount = 0
  mpp = no
  }
  # Loading module "invalid" from file
/usr/local/radius3017/etc/raddb/mods-enabled/always
  always invalid {
  rcode = "invalid"
  simulcount = 0
  mpp = no
  }
  # Loading module "userlock" from file
/usr/local/radius3017/etc/raddb/mods-enabled/always
  always userlock {
  rcode = "userlock"
  simulcount = 0
  mpp = no
  }
  # Loading module "notfound" from file
/usr/local/radius3017/etc/raddb/mods-enabled/always
  always notfound {
  rcode = "notfound"
  simulcount = 0
  mpp = no
  }
  # Loading module "noop" from file
/usr/local/radius3017/etc/raddb/mods-enabled/always
  always noop {
  rcode = "noop"
  simulcount = 0
  mpp = no
  }
  # Loading module "updated" from file
/usr/local/radius3017/etc/raddb/mods-enabled/always
  always updated {
  rcode = "updated"
  simulcount = 0
  mpp = no
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file
/usr/local/radius3017/etc/raddb/mods-enabled/expr
  expr {
  safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_radutmp
  # Loading module "sradutmp" from file
/usr/local/radius3017/etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
  filename = "/usr/local/radius3017/var/log/radius/sradutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 420
  caller_id = no
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file
/usr/local/radius3017/etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
  filename = "/etc/passwd"
  format = "*User-Name:Crypt-Password:"
  delimiter = ":"
  ignore_nislike = no
  ignore_empty = yes
  allow_multiple_keys = no
  hash_size = 100
  }
  # Loading module "exec" from file
/usr/local/radius3017/etc/raddb/mods-enabled/exec
  exec {
  wait = no
  input_pairs = "request"
  shell_escape = yes
  timeout = 10
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file
/usr/local/radius3017/etc/raddb/mods-enabled/pap
  pap {
  normalise = yes
  }
  # Loading module "auth_log" from file
/usr/local/radius3017/etc/raddb/mods-enabled/detail.log
  detail auth_log {
  filename = "/usr/local/radius3017/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "reply_log" from file
/usr/local/radius3017/etc/raddb/mods-enabled/detail.log
  detail reply_log {
  filename = "/usr/local/radius3017/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file
/usr/local/radius3017/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
  filename = "/usr/local/radius3017/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "post_proxy_log" from file
/usr/local/radius3017/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
  filename = "/usr/local/radius3017/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file
/usr/local/radius3017/etc/raddb/mods-enabled/expiration
  # Loaded module rlm_unpack
  # Loading module "unpack" from file
/usr/local/radius3017/etc/raddb/mods-enabled/unpack
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file
/usr/local/radius3017/etc/raddb/mods-enabled/preprocess
  preprocess {
  huntgroups = "/usr/local/radius3017/etc/raddb/mods-config/preprocess/huntgroups"
  hints = "/usr/local/radius3017/etc/raddb/mods-config/preprocess/hints"
  with_ascend_hack = no
  ascend_channels_per_line = 23
  with_ntdomain_hack = no
  with_specialix_jetstream_hack = no
  with_cisco_vsa_hack = no
  with_alvarion_vsa_hack = no
  }
  # Loading module "radutmp" from file
/usr/local/radius3017/etc/raddb/mods-enabled/radutmp
  radutmp {
  filename = "/usr/local/radius3017/var/log/radius/radutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 384
  caller_id = yes
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file
/usr/local/radius3017/etc/raddb/mods-enabled/replicate
  # Loaded module rlm_mschap
  # Loading module "mschap" from file
/usr/local/radius3017/etc/raddb/mods-enabled/mschap
  mschap {
  use_mppe = yes
  require_encryption = no
  require_strong = no
  with_ntdomain_hack = yes
   passchange {
   }
  allow_retry = yes
  winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file
/usr/local/radius3017/etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_realm
  # Loading module "IPASS" from file
/usr/local/radius3017/etc/raddb/mods-enabled/realm
  realm IPASS {
  format = "prefix"
  delimiter = "/"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "suffix" from file
/usr/local/radius3017/etc/raddb/mods-enabled/realm
  realm suffix {
  format = "suffix"
  delimiter = "@"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "realmpercent" from file
/usr/local/radius3017/etc/raddb/mods-enabled/realm
  realm realmpercent {
  format = "suffix"
  delimiter = "%"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "ntdomain" from file
/usr/local/radius3017/etc/raddb/mods-enabled/realm
  realm ntdomain {
  format = "prefix"
  delimiter = "\\"
  ignore_default = no
  ignore_null = no
  }
  # Loaded module rlm_files
  # Loading module "files" from file
/usr/local/radius3017/etc/raddb/mods-enabled/files
  files {
  filename = "/usr/local/radius3017/etc/raddb/mods-config/files/authorize"
  acctusersfile = "/usr/local/radius3017/etc/raddb/mods-config/files/accounting"
  preproxy_usersfile =
"/usr/local/radius3017/etc/raddb/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_eap
  # Loading module "eap" from file
/usr/local/radius3017/etc/raddb/mods-enabled/eap
  eap {
  default_eap_type = "md5"
  timer_expire = 60
  ignore_unknown_eap_types = no
  cisco_accounting_username_bug = no
  max_sessions = 16384
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file
/usr/local/radius3017/etc/raddb/mods-enabled/soh
  soh {
  dhcp = yes
  }
  # Loaded module rlm_date
  # Loading module "date" from file
/usr/local/radius3017/etc/raddb/mods-enabled/date
  date {
  format = "%b %e %Y %H:%M:%S %Z"
  utc = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file
/usr/local/radius3017/etc/raddb/mods-enabled/chap
  # Loaded module rlm_logintime
  # Loading module "logintime" from file
/usr/local/radius3017/etc/raddb/mods-enabled/logintime
  logintime {
  minimum_timeout = 60
  }
  instantiate {
  }
  # Instantiating module "cache_eap" from file
/usr/local/radius3017/etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module
rlm_cache_rbtree) loaded and linked
  # Instantiating module "ldap" from file
/usr/local/radius3017/etc/raddb/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20423
   accounting {
    reference = "%{tolower:type.%{Acct-Status-Type}}"
   }
   post-auth {
    reference = "."
   }
rlm_ldap (ldap): Initialising connection pool
   pool {
    start = 5
    min = 3
    max = 32
    spare = 10
    uses = 0
    lifetime = 0
    cleanup_interval = 30
    idle_timeout = 60
    retry_delay = 30
    spread = no
   }
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used
rlm_ldap (ldap): Connecting to ldap://192.168.103.10:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used
rlm_ldap (ldap): Connecting to ldap://192.168.103.10:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used
rlm_ldap (ldap): Connecting to ldap://192.168.103.10:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used
rlm_ldap (ldap): Connecting to ldap://192.168.103.10:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used
rlm_ldap (ldap): Connecting to ldap://192.168.103.10:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
  # Instantiating module "attr_filter.post-proxy" from file
/usr/local/radius3017/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/radius3017/etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/usr/local/radius3017/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/radius3017/etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/usr/local/radius3017/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/radius3017/etc/raddb/mods-config/attr_filter/access_reject
[/usr/local/radius3017/etc/raddb/mods-config/attr_filter/access_reject]:11
Check item "FreeRADIUS-Response-Delay" found in filter list for realm
"DEFAULT".
[/usr/local/radius3017/etc/raddb/mods-config/attr_filter/access_reject]:11
Check item "FreeRADIUS-Response-Delay-USec" found in filter list for
realm "DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file
/usr/local/radius3017/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/radius3017/etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/usr/local/radius3017/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/radius3017/etc/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "detail" from file
/usr/local/radius3017/etc/raddb/mods-enabled/detail
  # Instantiating module "linelog" from file
/usr/local/radius3017/etc/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file
/usr/local/radius3017/etc/raddb/mods-enabled/linelog
  # Instantiating module "reject" from file
/usr/local/radius3017/etc/raddb/mods-enabled/always
  # Instantiating module "fail" from file
/usr/local/radius3017/etc/raddb/mods-enabled/always
  # Instantiating module "ok" from file
/usr/local/radius3017/etc/raddb/mods-enabled/always
  # Instantiating module "handled" from file
/usr/local/radius3017/etc/raddb/mods-enabled/always
  # Instantiating module "invalid" from file
/usr/local/radius3017/etc/raddb/mods-enabled/always
  # Instantiating module "userlock" from file
/usr/local/radius3017/etc/raddb/mods-enabled/always
  # Instantiating module "notfound" from file
/usr/local/radius3017/etc/raddb/mods-enabled/always
  # Instantiating module "noop" from file
/usr/local/radius3017/etc/raddb/mods-enabled/always
  # Instantiating module "updated" from file
/usr/local/radius3017/etc/raddb/mods-enabled/always
  # Instantiating module "etc_passwd" from file
/usr/local/radius3017/etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "pap" from file
/usr/local/radius3017/etc/raddb/mods-enabled/pap
  # Instantiating module "auth_log" from file
/usr/local/radius3017/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/usr/local/radius3017/etc/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file
/usr/local/radius3017/etc/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file
/usr/local/radius3017/etc/raddb/mods-enabled/detail.log
  # Instantiating module "expiration" from file
/usr/local/radius3017/etc/raddb/mods-enabled/expiration
  # Instantiating module "preprocess" from file
/usr/local/radius3017/etc/raddb/mods-enabled/preprocess
reading pairlist file
/usr/local/radius3017/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file
/usr/local/radius3017/etc/raddb/mods-config/preprocess/hints
  # Instantiating module "mschap" from file
/usr/local/radius3017/etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "IPASS" from file
/usr/local/radius3017/etc/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file
/usr/local/radius3017/etc/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file
/usr/local/radius3017/etc/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file
/usr/local/radius3017/etc/raddb/mods-enabled/realm
  # Instantiating module "files" from file
/usr/local/radius3017/etc/raddb/mods-enabled/files
reading pairlist file
/usr/local/radius3017/etc/raddb/mods-config/files/authorize
reading pairlist file
/usr/local/radius3017/etc/raddb/mods-config/files/accounting
reading pairlist file
/usr/local/radius3017/etc/raddb/mods-config/files/pre-proxy
  # Instantiating module "eap" from file
/usr/local/radius3017/etc/raddb/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
    challenge = "Password: "
    auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
    tls = "tls-common"
   }
   tls-config tls-common {
    verify_depth = 0
    ca_path = "/usr/local/radius3017/etc/raddb/certs"
    pem_file_type = yes
    private_key_file = "/usr/local/radius3017/etc/raddb/certs/server.pem"
    certificate_file = "/usr/local/radius3017/etc/raddb/certs/server.pem"
    ca_file = "/usr/local/radius3017/etc/raddb/certs/ca.pem"
    private_key_password = <<< secret >>>
    dh_file = "/usr/local/radius3017/etc/raddb/certs/dh"
    fragment_size = 1024
    include_length = yes
    auto_chain = yes
    check_crl = no
    check_all_crl = no
    cipher_list = "DEFAULT"
    cipher_server_preference = no
    ecdh_curve = "prime256v1"
    tls_max_version = ""
    tls_min_version = "1.0"
    cache {
    enable = no
    lifetime = 24
    max_entries = 255
    }
    verify {
    skip_if_ocsp_ok = no
    }
    ocsp {
    enable = no
    override_cert_url = yes
    url = "http://127.0.0.1/ocsp/"
    use_nonce = yes
    timeout = 0
    softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
    tls = "tls-common"
    default_eap_type = "md5"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    virtual_server = "inner-tunnel"
    include_length = yes
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
    tls = "tls-common"
    default_eap_type = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
    soh = no
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
    with_ntdomain_hack = no
    send_error = no
   }
  # Instantiating module "logintime" from file
/usr/local/radius3017/etc/raddb/mods-enabled/logintime
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/radius3017/etc/raddb/radiusd.conf
} # server
server default { # from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server inner-tunnel { # from file
/usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' --
/usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel:336
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
  type = "auth"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipaddr = 127.0.0.1
  port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 43502
Listening on proxy address :: port 55579
Ready to process requests
(0) Received Access-Request Id 0 from 192.168.103.4:54191 to
192.168.103.2:1812 length 122
(0)   User-Name = "user001"
(0)   NAS-IP-Address = 127.0.0.1
(0)   Calling-Station-Id = "02-00-00-00-00-01"
(0)   Framed-MTU = 1400
(0)   NAS-Port-Type = Wireless-802.11
(0)   Connect-Info = "CONNECT 11Mbps 802.11b"
(0)   EAP-Message = 0x0200000c0175736572303031
(0)   Message-Authenticator = 0xc885dc51df810c465f2f643c4b7b364d
(0) # Executing section authorize from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "user001", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 0 length 12
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit
the rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 1 length 22
(0) eap: EAP session adding &reply:State = 0x63bfa57663bea17c
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 0 from 192.168.103.2:1812 to
192.168.103.4:54191 length 0
(0)   EAP-Message = 0x010100160410dea60f1aa1ab4d61facecddb2dc85392
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0x63bfa57663bea17ce3622035b8b7b965
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 1 from 192.168.103.4:54191 to
192.168.103.2:1812 length 134
(1)   User-Name = "user001"
(1)   NAS-IP-Address = 127.0.0.1
(1)   Calling-Station-Id = "02-00-00-00-00-01"
(1)   Framed-MTU = 1400
(1)   NAS-Port-Type = Wireless-802.11
(1)   Connect-Info = "CONNECT 11Mbps 802.11b"
(1)   EAP-Message = 0x020100060319
(1)   State = 0x63bfa57663bea17ce3622035b8b7b965
(1)   Message-Authenticator = 0x351250e00b06b7729eaa3c3356a4bc84
(1) session-state: No cached attributes
(1) # Executing section authorize from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "user001", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 1 length 6
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1)     [eap] = updated
(1)     [files] = noop
rlm_ldap (ldap): Reserved connection (0)
(1) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(1) ldap:    --> (uid=user001)
(1) ldap: Performing search in "dc=home" with filter "(uid=user001)",
scope "sub"
(1) ldap: Waiting for search result...
(1) ldap: User object found at DN "uid=user001,ou=test,dc=home"
(1) ldap: Processing user attributes
(1) ldap: control:My-Raw-Password += 0x506173735c313030776f7264
rlm_ldap (ldap): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used
rlm_ldap (ldap): Connecting to ldap://192.168.103.10:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(1)     [ldap] = updated
(1)     [expiration] = noop
(1)     [logintime] = noop
(1) pap: WARNING: No "known good" password found for the user.  Not
setting Auth-Type
(1) pap: WARNING: Authentication will fail unless a "known good"
password is available
(1)     [pap] = noop
(1)   } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0x63bfa57663bea17c
(1) eap: Finished EAP session with state 0x63bfa57663bea17c
(1) eap: Previous EAP request found for state 0x63bfa57663bea17c,
released from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Initiating new EAP-TLS session
(1) eap_peap: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 2 length 6
(1) eap: EAP session adding &reply:State = 0x63bfa57662bdbc7c
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(1)   Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 1 from 192.168.103.2:1812 to
192.168.103.4:54191 length 0
(1)   EAP-Message = 0x010200061920
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0x63bfa57662bdbc7ce3622035b8b7b965
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 2 from 192.168.103.4:54191 to
192.168.103.2:1812 length 293
(2)   User-Name = "user001"
(2)   NAS-IP-Address = 127.0.0.1
(2)   Calling-Station-Id = "02-00-00-00-00-01"
(2)   Framed-MTU = 1400
(2)   NAS-Port-Type = Wireless-802.11
(2)   Connect-Info = "CONNECT 11Mbps 802.11b"
(2)   EAP-Message =
0x020200a519800000009b16030100960100009203015b3476210f25030109abb1ec18baa2b50a0d7de249af4a5e9f0e1aae2d087db400004cc014c00a0039003800880087c00fc00500350084c013c00900330032009a009900450044c00ec004002f00960041c012c00800160013c00dc003000a0007c0
(2)   State = 0x63bfa57662bdbc7ce3622035b8b7b965
(2)   Message-Authenticator = 0xdeaeed4e11b37c6b8d7b0742c666d8c9
(2) session-state: No cached attributes
(2) # Executing section authorize from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "user001", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 2 length 165
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0x63bfa57662bdbc7c
(2) eap: Finished EAP session with state 0x63bfa57662bdbc7c
(2) eap: Previous EAP request found for state 0x63bfa57662bdbc7c,
released from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: Peer indicated complete TLS record size will be 155 bytes
(2) eap_peap: Got complete TLS record (155 bytes)
(2) eap_peap: [eaptls verify] = length included
(2) eap_peap: (other): before/accept initialization
(2) eap_peap: TLS_accept: before/accept initialization
(2) eap_peap: <<< recv TLS 1.0 Handshake [length 0096], ClientHello
(2) eap_peap: TLS_accept: SSLv3 read client hello A
(2) eap_peap: >>> send TLS 1.0 Handshake [length 003e], ServerHello
(2) eap_peap: TLS_accept: SSLv3 write server hello A
(2) eap_peap: >>> send TLS 1.0 Handshake [length 08d3], Certificate
(2) eap_peap: TLS_accept: SSLv3 write certificate A
(2) eap_peap: >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange
(2) eap_peap: TLS_accept: SSLv3 write key exchange A
(2) eap_peap: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone
(2) eap_peap: TLS_accept: SSLv3 write server done A
(2) eap_peap: TLS_accept: SSLv3 flush data
(2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client
certificate A
(2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client
certificate A
(2) eap_peap: In SSL Handshake Phase
(2) eap_peap: In SSL Accept mode
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 3 length 1004
(2) eap: EAP session adding &reply:State = 0x63bfa57661bcbc7c
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 2 from 192.168.103.2:1812 to
192.168.103.4:54191 length 0
(2)   EAP-Message =
0x010303ec19c000000a74160301003e0200003a03015b33f7ad9f86b2f688c3af9e0c0ecadf575dfd4adfc3388fd87f6db69edc953800c014000012ff01000100000b000403000102000f00010116030108d30b0008cf0008cc0003de308203da308202c2a003020102020101300d06092a864886f70d01
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0x63bfa57661bcbc7ce3622035b8b7b965
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 3 from 192.168.103.4:54191 to
192.168.103.2:1812 length 134
(3)   User-Name = "user001"
(3)   NAS-IP-Address = 127.0.0.1
(3)   Calling-Station-Id = "02-00-00-00-00-01"
(3)   Framed-MTU = 1400
(3)   NAS-Port-Type = Wireless-802.11
(3)   Connect-Info = "CONNECT 11Mbps 802.11b"
(3)   EAP-Message = 0x020300061900
(3)   State = 0x63bfa57661bcbc7ce3622035b8b7b965
(3)   Message-Authenticator = 0x97de852a77fa6cda5d7782b8e77690ca
(3) session-state: No cached attributes
(3) # Executing section authorize from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "user001", looking up realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 3 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0x63bfa57661bcbc7c
(3) eap: Finished EAP session with state 0x63bfa57661bcbc7c
(3) eap: Previous EAP request found for state 0x63bfa57661bcbc7c,
released from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer ACKed our handshake fragment
(3) eap_peap: [eaptls verify] = request
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 4 length 1000
(3) eap: EAP session adding &reply:State = 0x63bfa57660bbbc7c
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(3)   Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 3 from 192.168.103.2:1812 to
192.168.103.4:54191 length 0
(3)   EAP-Message =
0x010403e81940d3231b0bfa48b450b8c89f0432a23a5ac5d3f6b7f19378f4901279ac237212a82650f14d833aed8e1adce602b8c6de097685d288edf92cdf406d49f25ef4d291c474d5c1a6ffbe64fae1ef6197d30004e8308204e4308203cca003020102020900c762d342c4805c0e300d06092a864886
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0x63bfa57660bbbc7ce3622035b8b7b965
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 4 from 192.168.103.4:54191 to
192.168.103.2:1812 length 134
(4)   User-Name = "user001"
(4)   NAS-IP-Address = 127.0.0.1
(4)   Calling-Station-Id = "02-00-00-00-00-01"
(4)   Framed-MTU = 1400
(4)   NAS-Port-Type = Wireless-802.11
(4)   Connect-Info = "CONNECT 11Mbps 802.11b"
(4)   EAP-Message = 0x020400061900
(4)   State = 0x63bfa57660bbbc7ce3622035b8b7b965
(4)   Message-Authenticator = 0xe151564ef76cf19982c20891e5eb97df
(4) session-state: No cached attributes
(4) # Executing section authorize from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "user001", looking up realm NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 4 length 6
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0x63bfa57660bbbc7c
(4) eap: Finished EAP session with state 0x63bfa57660bbbc7c
(4) eap: Previous EAP request found for state 0x63bfa57660bbbc7c,
released from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer ACKed our handshake fragment
(4) eap_peap: [eaptls verify] = request
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 5 length 694
(4) eap: EAP session adding &reply:State = 0x63bfa57667babc7c
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(4)   Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 4 from 192.168.103.2:1812 to
192.168.103.4:54191 length 0
(4)   EAP-Message =
0x010502b61900130101ff040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d0101050500038201010092d400531c09e1c44c689f11afbb4bc09bf6857fc4464ea15c59
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0x63bfa57667babc7ce3622035b8b7b965
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 5 from 192.168.103.4:54191 to
192.168.103.2:1812 length 272
(5)   User-Name = "user001"
(5)   NAS-IP-Address = 127.0.0.1
(5)   Calling-Station-Id = "02-00-00-00-00-01"
(5)   Framed-MTU = 1400
(5)   NAS-Port-Type = Wireless-802.11
(5)   Connect-Info = "CONNECT 11Mbps 802.11b"
(5)   EAP-Message =
0x020500901980000000861603010046100000424104141b3363b78d9e34ebb06dd3f4e2e70a5b24ab4b8e4dfd7916ab5821a34661b07563e496a91631966033150eab6bd755eda9e1ce498727476ead7e6c7c3e9df414030100010116030100305b2de5b1eb7226d92e77286c4db352faff05f90e897373
(5)   State = 0x63bfa57667babc7ce3622035b8b7b965
(5)   Message-Authenticator = 0x93a9b4696fda38025e6fec3adca24559
(5) session-state: No cached attributes
(5) # Executing section authorize from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "user001", looking up realm NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 5 length 144
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0x63bfa57667babc7c
(5) eap: Finished EAP session with state 0x63bfa57667babc7c
(5) eap: Previous EAP request found for state 0x63bfa57667babc7c,
released from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: Peer indicated complete TLS record size will be 134 bytes
(5) eap_peap: Got complete TLS record (134 bytes)
(5) eap_peap: [eaptls verify] = length included
(5) eap_peap: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange
(5) eap_peap: TLS_accept: SSLv3 read client key exchange A
(5) eap_peap: <<< recv TLS 1.0 ChangeCipherSpec [length 0001]
(5) eap_peap: <<< recv TLS 1.0 Handshake [length 0010], Finished
(5) eap_peap: TLS_accept: SSLv3 read finished A
(5) eap_peap: >>> send TLS 1.0 ChangeCipherSpec [length 0001]
(5) eap_peap: TLS_accept: SSLv3 write change cipher spec A
(5) eap_peap: >>> send TLS 1.0 Handshake [length 0010], Finished
(5) eap_peap: TLS_accept: SSLv3 write finished A
(5) eap_peap: TLS_accept: SSLv3 flush data
(5) eap_peap: (other): SSL negotiation finished successfully
(5) eap_peap: SSL Connection Established
(5) eap_peap: [eaptls process] = handled
(5) eap: Sending EAP Request (code 1) ID 6 length 65
(5) eap: EAP session adding &reply:State = 0x63bfa57666b9bc7c
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(5)   Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 5 from 192.168.103.2:1812 to
192.168.103.4:54191 length 0
(5)   EAP-Message =
0x0106004119001403010001011603010030bf8597eb673083f5fbf7dcc991e208bb18f7e7fc8692d41d72f654708f338b25e5404b9c4b2c99f26423b0dd8c931afa
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0x63bfa57666b9bc7ce3622035b8b7b965
(5) Finished request
Waking up in 4.9 seconds.
(6) Received Access-Request Id 6 from 192.168.103.4:54191 to
192.168.103.2:1812 length 134
(6)   User-Name = "user001"
(6)   NAS-IP-Address = 127.0.0.1
(6)   Calling-Station-Id = "02-00-00-00-00-01"
(6)   Framed-MTU = 1400
(6)   NAS-Port-Type = Wireless-802.11
(6)   Connect-Info = "CONNECT 11Mbps 802.11b"
(6)   EAP-Message = 0x020600061900
(6)   State = 0x63bfa57666b9bc7ce3622035b8b7b965
(6)   Message-Authenticator = 0x8db805984f55f0c1acce2a882b945d8b
(6) session-state: No cached attributes
(6) # Executing section authorize from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(6)   authorize {
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = notfound
(6)     } # policy filter_username = notfound
(6)     [preprocess] = ok
(6)     [chap] = noop
(6)     [mschap] = noop
(6)     [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "user001", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)     [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 6 length 6
(6) eap: Continuing tunnel setup
(6)     [eap] = ok
(6)   } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(6)   authenticate {
(6) eap: Expiring EAP session with state 0x63bfa57666b9bc7c
(6) eap: Finished EAP session with state 0x63bfa57666b9bc7c
(6) eap: Previous EAP request found for state 0x63bfa57666b9bc7c,
released from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: Continuing EAP-TLS
(6) eap_peap: Peer ACKed our handshake fragment.  handshake is finished
(6) eap_peap: [eaptls verify] = success
(6) eap_peap: [eaptls process] = success
(6) eap_peap: Session established.  Decoding tunneled attributes
(6) eap_peap: PEAP state TUNNEL ESTABLISHED
(6) eap: Sending EAP Request (code 1) ID 7 length 43
(6) eap: EAP session adding &reply:State = 0x63bfa57665b8bc7c
(6)     [eap] = handled
(6)   } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(6)   Challenge { ... } # empty sub-section is ignored
(6) Sent Access-Challenge Id 6 from 192.168.103.2:1812 to
192.168.103.4:54191 length 0
(6)   EAP-Message =
0x0107002b1900170301002025728f8f0e3124d24688a36c646701211b298ae853a53f11479cc97de3d6744c
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0x63bfa57665b8bc7ce3622035b8b7b965
(6) Finished request
Waking up in 4.9 seconds.
(7) Received Access-Request Id 7 from 192.168.103.4:54191 to
192.168.103.2:1812 length 208
(7)   User-Name = "user001"
(7)   NAS-IP-Address = 127.0.0.1
(7)   Calling-Station-Id = "02-00-00-00-00-01"
(7)   Framed-MTU = 1400
(7)   NAS-Port-Type = Wireless-802.11
(7)   Connect-Info = "CONNECT 11Mbps 802.11b"
(7)   EAP-Message =
0x0207005019001703010020c8a1903c149c4f7198fb4f512b0ee2d8ec252728614f693fa5cfb8fd304a68321703010020ae5774a9fe2e3cc03c1319caeb467fa25c1e3da4f1c0f56f6fc13ef824d7f253
(7)   State = 0x63bfa57665b8bc7ce3622035b8b7b965
(7)   Message-Authenticator = 0x5a84841bf510327914ae46aae685b955
(7) session-state: No cached attributes
(7) # Executing section authorize from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(7)   authorize {
(7)     policy filter_username {
(7)       if (&User-Name) {
(7)       if (&User-Name)  -> TRUE
(7)       if (&User-Name)  {
(7)         if (&User-Name =~ / /) {
(7)         if (&User-Name =~ / /)  -> FALSE
(7)         if (&User-Name =~ /@[^@]*@/ ) {
(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)         if (&User-Name =~ /\.\./ ) {
(7)         if (&User-Name =~ /\.\./ )  -> FALSE
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(7)         if (&User-Name =~ /\.$/)  {
(7)         if (&User-Name =~ /\.$/)   -> FALSE
(7)         if (&User-Name =~ /@\./)  {
(7)         if (&User-Name =~ /@\./)   -> FALSE
(7)       } # if (&User-Name)  = notfound
(7)     } # policy filter_username = notfound
(7)     [preprocess] = ok
(7)     [chap] = noop
(7)     [mschap] = noop
(7)     [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "user001", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)     [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 7 length 80
(7) eap: Continuing tunnel setup
(7)     [eap] = ok
(7)   } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(7)   authenticate {
(7) eap: Expiring EAP session with state 0x63bfa57665b8bc7c
(7) eap: Finished EAP session with state 0x63bfa57665b8bc7c
(7) eap: Previous EAP request found for state 0x63bfa57665b8bc7c,
released from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: Continuing EAP-TLS
(7) eap_peap: [eaptls verify] = ok
(7) eap_peap: Done initial handshake
(7) eap_peap: [eaptls process] = ok
(7) eap_peap: Session established.  Decoding tunneled attributes
(7) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(7) eap_peap: Identity - user001
(7) eap_peap: Got inner identity 'user001'
(7) eap_peap: Setting default EAP type for tunneled EAP session
(7) eap_peap: Got tunneled request
(7) eap_peap:   EAP-Message = 0x0207000c0175736572303031
(7) eap_peap: Setting User-Name to user001
(7) eap_peap: Sending tunneled request to inner-tunnel
(7) eap_peap:   EAP-Message = 0x0207000c0175736572303031
(7) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_peap:   User-Name = "user001"
(7) Virtual server inner-tunnel received request
(7)   EAP-Message = 0x0207000c0175736572303031
(7)   FreeRADIUS-Proxied-To = 127.0.0.1
(7)   User-Name = "user001"
(7) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(7) server inner-tunnel {
(7)   # Executing section authorize from file
/usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel
(7)     authorize {
(7)       policy filter_username {
(7)         if (&User-Name) {
(7)         if (&User-Name)  -> TRUE
(7)         if (&User-Name)  {
(7)           if (&User-Name =~ / /) {
(7)           if (&User-Name =~ / /)  -> FALSE
(7)           if (&User-Name =~ /@[^@]*@/ ) {
(7)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)           if (&User-Name =~ /\.\./ ) {
(7)           if (&User-Name =~ /\.\./ )  -> FALSE
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)           if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))   -> FALSE
(7)           if (&User-Name =~ /\.$/)  {
(7)           if (&User-Name =~ /\.$/)   -> FALSE
(7)           if (&User-Name =~ /@\./)  {
(7)           if (&User-Name =~ /@\./)   -> FALSE
(7)         } # if (&User-Name)  = notfound
(7)       } # policy filter_username = notfound
(7)       [chap] = noop
(7)       [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "user001", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)       [suffix] = noop
(7)       update control {
(7)         &Proxy-To-Realm := LOCAL
(7)       } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 7 length 12
(7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit
the rest of authorize
(7)       [eap] = ok
(7)     } # authorize = ok
(7)   Found Auth-Type = eap
(7)   # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel
(7)     authenticate {
(7) eap: Peer sent packet with method EAP Identity (1)
(7) eap: Calling submodule eap_mschapv2 to process data
(7) eap_mschapv2: Issuing Challenge
(7) eap: Sending EAP Request (code 1) ID 8 length 43
(7) eap: EAP session adding &reply:State = 0xc584a370c58cb988
(7)       [eap] = handled
(7)     } # authenticate = handled
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7)   EAP-Message =
0x0108002b1a0108002610c9ee433ea5e08b55fdabba1f66854f0e667265657261646975732d332e302e3137
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0xc584a370c58cb9882ecb1c1496991127
(7) eap_peap: Got tunneled reply code 11
(7) eap_peap:   EAP-Message =
0x0108002b1a0108002610c9ee433ea5e08b55fdabba1f66854f0e667265657261646975732d332e302e3137
(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap:   State = 0xc584a370c58cb9882ecb1c1496991127
(7) eap_peap: Got tunneled reply RADIUS code 11
(7) eap_peap:   EAP-Message =
0x0108002b1a0108002610c9ee433ea5e08b55fdabba1f66854f0e667265657261646975732d332e302e3137
(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap:   State = 0xc584a370c58cb9882ecb1c1496991127
(7) eap_peap: Got tunneled Access-Challenge
(7) eap: Sending EAP Request (code 1) ID 8 length 75
(7) eap: EAP session adding &reply:State = 0x63bfa57664b7bc7c
(7)     [eap] = handled
(7)   } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(7)   Challenge { ... } # empty sub-section is ignored
(7) Sent Access-Challenge Id 7 from 192.168.103.2:1812 to
192.168.103.4:54191 length 0
(7)   EAP-Message =
0x0108004b19001703010040fe32215b5203bce119d6605abb2729d6cd322b24ec4c257bc4f65e27327af07d642d55f32931998b51b8efae0abf7c24950cd2472a96695223481866a9b0b3d4
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0x63bfa57664b7bc7ce3622035b8b7b965
(7) Finished request
Waking up in 4.9 seconds.
(8) Received Access-Request Id 8 from 192.168.103.4:54191 to
192.168.103.2:1812 length 272
(8)   User-Name = "user001"
(8)   NAS-IP-Address = 127.0.0.1
(8)   Calling-Station-Id = "02-00-00-00-00-01"
(8)   Framed-MTU = 1400
(8)   NAS-Port-Type = Wireless-802.11
(8)   Connect-Info = "CONNECT 11Mbps 802.11b"
(8)   EAP-Message =
0x02080090190017030100209b89c033e23be72720fe7827c0f63fb7a7b024eb756940e63eb4a8f45b796a8e1703010060755b03e0ee6a1c73fe5038ed879bbd245b6b22bb55c3ba9792d212d94795dea2ea96ae95096104885cef9810e98227161e1f21d8125ba596131f1060f647c4e442a67e2ac7d01b
(8)   State = 0x63bfa57664b7bc7ce3622035b8b7b965
(8)   Message-Authenticator = 0x73fd07330a4c4005170417ea72a423cc
(8) session-state: No cached attributes
(8) # Executing section authorize from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(8)   authorize {
(8)     policy filter_username {
(8)       if (&User-Name) {
(8)       if (&User-Name)  -> TRUE
(8)       if (&User-Name)  {
(8)         if (&User-Name =~ / /) {
(8)         if (&User-Name =~ / /)  -> FALSE
(8)         if (&User-Name =~ /@[^@]*@/ ) {
(8)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)         if (&User-Name =~ /\.\./ ) {
(8)         if (&User-Name =~ /\.\./ )  -> FALSE
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(8)         if (&User-Name =~ /\.$/)  {
(8)         if (&User-Name =~ /\.$/)   -> FALSE
(8)         if (&User-Name =~ /@\./)  {
(8)         if (&User-Name =~ /@\./)   -> FALSE
(8)       } # if (&User-Name)  = notfound
(8)     } # policy filter_username = notfound
(8)     [preprocess] = ok
(8)     [chap] = noop
(8)     [mschap] = noop
(8)     [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "user001", looking up realm NULL
(8) suffix: No such realm "NULL"
(8)     [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 8 length 144
(8) eap: Continuing tunnel setup
(8)     [eap] = ok
(8)   } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(8)   authenticate {
(8) eap: Expiring EAP session with state 0xc584a370c58cb988
(8) eap: Finished EAP session with state 0x63bfa57664b7bc7c
(8) eap: Previous EAP request found for state 0x63bfa57664b7bc7c,
released from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: Continuing EAP-TLS
(8) eap_peap: [eaptls verify] = ok
(8) eap_peap: Done initial handshake
(8) eap_peap: [eaptls process] = ok
(8) eap_peap: Session established.  Decoding tunneled attributes
(8) eap_peap: PEAP state phase2
(8) eap_peap: EAP method MSCHAPv2 (26)
(8) eap_peap: Got tunneled request
(8) eap_peap:   EAP-Message =
0x020800421a0208003d311ac196340dd41f4956939750cfbb00e20000000000000000bcf094634369e64120eeb2a628a539953846d4bc9eb6c4540075736572303031
(8) eap_peap: Setting User-Name to user001
(8) eap_peap: Sending tunneled request to inner-tunnel
(8) eap_peap:   EAP-Message =
0x020800421a0208003d311ac196340dd41f4956939750cfbb00e20000000000000000bcf094634369e64120eeb2a628a539953846d4bc9eb6c4540075736572303031
(8) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(8) eap_peap:   User-Name = "user001"
(8) eap_peap:   State = 0xc584a370c58cb9882ecb1c1496991127
(8) Virtual server inner-tunnel received request
(8)   EAP-Message =
0x020800421a0208003d311ac196340dd41f4956939750cfbb00e20000000000000000bcf094634369e64120eeb2a628a539953846d4bc9eb6c4540075736572303031
(8)   FreeRADIUS-Proxied-To = 127.0.0.1
(8)   User-Name = "user001"
(8)   State = 0xc584a370c58cb9882ecb1c1496991127
(8) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(8) server inner-tunnel {
(8)   session-state: No cached attributes
(8)   # Executing section authorize from file
/usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel
(8)     authorize {
(8)       policy filter_username {
(8)         if (&User-Name) {
(8)         if (&User-Name)  -> TRUE
(8)         if (&User-Name)  {
(8)           if (&User-Name =~ / /) {
(8)           if (&User-Name =~ / /)  -> FALSE
(8)           if (&User-Name =~ /@[^@]*@/ ) {
(8)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)           if (&User-Name =~ /\.\./ ) {
(8)           if (&User-Name =~ /\.\./ )  -> FALSE
(8)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(8)           if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))   -> FALSE
(8)           if (&User-Name =~ /\.$/)  {
(8)           if (&User-Name =~ /\.$/)   -> FALSE
(8)           if (&User-Name =~ /@\./)  {
(8)           if (&User-Name =~ /@\./)   -> FALSE
(8)         } # if (&User-Name)  = notfound
(8)       } # policy filter_username = notfound
(8)       [chap] = noop
(8)       [mschap] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "user001", looking up realm NULL
(8) suffix: No such realm "NULL"
(8)       [suffix] = noop
(8)       update control {
(8)         &Proxy-To-Realm := LOCAL
(8)       } # update control = noop
(8) eap: Peer sent EAP Response (code 2) ID 8 length 66
(8) eap: No EAP Start, assuming it's an on-going EAP conversation
(8)       [eap] = updated
(8)       [files] = noop
rlm_ldap (ldap): Reserved connection (1)
(8) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(8) ldap:    --> (uid=user001)
(8) ldap: Performing search in "dc=home" with filter "(uid=user001)",
scope "sub"
(8) ldap: Waiting for search result...
(8) ldap: User object found at DN "uid=user001,ou=test,dc=home"
(8) ldap: Processing user attributes
(8) ldap: control:My-Raw-Password += 0x506173735c313030776f7264
rlm_ldap (ldap): Released connection (1)
(8)       [ldap] = updated
(8)       if (control:My-Raw-Password) {
(8)       if (control:My-Raw-Password)  -> TRUE
(8)       if (control:My-Raw-Password)  {
(8)         update control {
(8)           EXPAND %{string:control:My-Raw-Password}
(8)              --> Pass\\100word
(8)           Cleartext-Password := Pass\100word
(8)         } # update control = noop
(8)       } # if (control:My-Raw-Password)  = noop
(8)       [expiration] = noop
(8)       [logintime] = noop
(8) pap: WARNING: Auth-Type already set.  Not setting to PAP
(8)       [pap] = noop
(8)     } # authorize = updated
(8)   Found Auth-Type = eap
(8)   # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel
(8)     authenticate {
(8) eap: Expiring EAP session with state 0xc584a370c58cb988
(8) eap: Finished EAP session with state 0xc584a370c58cb988
(8) eap: Previous EAP request found for state 0xc584a370c58cb988,
released from the list
(8) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(8) eap: Calling submodule eap_mschapv2 to process data
(8) eap_mschapv2: # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel
(8) eap_mschapv2:   authenticate {
(8) mschap: Found Cleartext-Password, hashing to create NT-Password
(8) mschap: Cleartext-Password : Pass\100word
(8) mschap: Found Cleartext-Password, hashing to create LM-Password
(8) mschap: Creating challenge hash with username: user001
(8) mschap: Client is using MS-CHAPv2
(8) mschap: Adding MS-CHAPv2 MPPE keys
(8)     [mschap] = ok
(8)   } # authenticate = ok
(8) MSCHAP Success
(8) eap: Sending EAP Request (code 1) ID 9 length 51
(8) eap: EAP session adding &reply:State = 0xc584a370c48db988
(8)       [eap] = handled
(8)     } # authenticate = handled
(8) } # server inner-tunnel
(8) Virtual server sending reply
(8)   EAP-Message =
0x010900331a0308002e533d42323130424342444430323930394134304436464641463942393133354132313446413030433842
(8)   Message-Authenticator = 0x00000000000000000000000000000000
(8)   State = 0xc584a370c48db9882ecb1c1496991127
(8) eap_peap: Got tunneled reply code 11
(8) eap_peap:   EAP-Message =
0x010900331a0308002e533d42323130424342444430323930394134304436464641463942393133354132313446413030433842
(8) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap:   State = 0xc584a370c48db9882ecb1c1496991127
(8) eap_peap: Got tunneled reply RADIUS code 11
(8) eap_peap:   EAP-Message =
0x010900331a0308002e533d42323130424342444430323930394134304436464641463942393133354132313446413030433842
(8) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap:   State = 0xc584a370c48db9882ecb1c1496991127
(8) eap_peap: Got tunneled Access-Challenge
(8) eap: Sending EAP Request (code 1) ID 9 length 91
(8) eap: EAP session adding &reply:State = 0x63bfa5766bb6bc7c
(8)     [eap] = handled
(8)   } # authenticate = handled
(8) Using Post-Auth-Type Challenge
(8) # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(8)   Challenge { ... } # empty sub-section is ignored
(8) Sent Access-Challenge Id 8 from 192.168.103.2:1812 to
192.168.103.4:54191 length 0
(8)   EAP-Message =
0x0109005b1900170301005085f86c92aed9947f4422cf06fc75d959199610378624c0d36d810469d1d0072a21658a46d17fbdb692623131d082acdae74779950b089e4401e90a83d225dc5931a064d94dab438d208abcd000d7a318
(8)   Message-Authenticator = 0x00000000000000000000000000000000
(8)   State = 0x63bfa5766bb6bc7ce3622035b8b7b965
(8) Finished request
Waking up in 4.9 seconds.
(9) Received Access-Request Id 9 from 192.168.103.4:54191 to
192.168.103.2:1812 length 208
(9)   User-Name = "user001"
(9)   NAS-IP-Address = 127.0.0.1
(9)   Calling-Station-Id = "02-00-00-00-00-01"
(9)   Framed-MTU = 1400
(9)   NAS-Port-Type = Wireless-802.11
(9)   Connect-Info = "CONNECT 11Mbps 802.11b"
(9)   EAP-Message =
0x020900501900170301002025c55ce160f58902cd20d225fdac2e0765c4a1816bb5c3e05f2afbebe8ec861117030100209ab908b72fef790e34426b45057e4b7a6a05861313cc62ebdb6964ae211dc3e7
(9)   State = 0x63bfa5766bb6bc7ce3622035b8b7b965
(9)   Message-Authenticator = 0x22f38db1c0dd48ae142a4720234711f6
(9) session-state: No cached attributes
(9) # Executing section authorize from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(9)   authorize {
(9)     policy filter_username {
(9)       if (&User-Name) {
(9)       if (&User-Name)  -> TRUE
(9)       if (&User-Name)  {
(9)         if (&User-Name =~ / /) {
(9)         if (&User-Name =~ / /)  -> FALSE
(9)         if (&User-Name =~ /@[^@]*@/ ) {
(9)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(9)         if (&User-Name =~ /\.\./ ) {
(9)         if (&User-Name =~ /\.\./ )  -> FALSE
(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(9)         if (&User-Name =~ /\.$/)  {
(9)         if (&User-Name =~ /\.$/)   -> FALSE
(9)         if (&User-Name =~ /@\./)  {
(9)         if (&User-Name =~ /@\./)   -> FALSE
(9)       } # if (&User-Name)  = notfound
(9)     } # policy filter_username = notfound
(9)     [preprocess] = ok
(9)     [chap] = noop
(9)     [mschap] = noop
(9)     [digest] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "user001", looking up realm NULL
(9) suffix: No such realm "NULL"
(9)     [suffix] = noop
(9) eap: Peer sent EAP Response (code 2) ID 9 length 80
(9) eap: Continuing tunnel setup
(9)     [eap] = ok
(9)   } # authorize = ok
(9) Found Auth-Type = eap
(9) # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(9)   authenticate {
(9) eap: Expiring EAP session with state 0xc584a370c48db988
(9) eap: Finished EAP session with state 0x63bfa5766bb6bc7c
(9) eap: Previous EAP request found for state 0x63bfa5766bb6bc7c,
released from the list
(9) eap: Peer sent packet with method EAP PEAP (25)
(9) eap: Calling submodule eap_peap to process data
(9) eap_peap: Continuing EAP-TLS
(9) eap_peap: [eaptls verify] = ok
(9) eap_peap: Done initial handshake
(9) eap_peap: [eaptls process] = ok
(9) eap_peap: Session established.  Decoding tunneled attributes
(9) eap_peap: PEAP state phase2
(9) eap_peap: EAP method MSCHAPv2 (26)
(9) eap_peap: Got tunneled request
(9) eap_peap:   EAP-Message = 0x020900061a03
(9) eap_peap: Setting User-Name to user001
(9) eap_peap: Sending tunneled request to inner-tunnel
(9) eap_peap:   EAP-Message = 0x020900061a03
(9) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(9) eap_peap:   User-Name = "user001"
(9) eap_peap:   State = 0xc584a370c48db9882ecb1c1496991127
(9) Virtual server inner-tunnel received request
(9)   EAP-Message = 0x020900061a03
(9)   FreeRADIUS-Proxied-To = 127.0.0.1
(9)   User-Name = "user001"
(9)   State = 0xc584a370c48db9882ecb1c1496991127
(9) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(9) server inner-tunnel {
(9)   session-state: No cached attributes
(9)   # Executing section authorize from file
/usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel
(9)     authorize {
(9)       policy filter_username {
(9)         if (&User-Name) {
(9)         if (&User-Name)  -> TRUE
(9)         if (&User-Name)  {
(9)           if (&User-Name =~ / /) {
(9)           if (&User-Name =~ / /)  -> FALSE
(9)           if (&User-Name =~ /@[^@]*@/ ) {
(9)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(9)           if (&User-Name =~ /\.\./ ) {
(9)           if (&User-Name =~ /\.\./ )  -> FALSE
(9)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(9)           if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))   -> FALSE
(9)           if (&User-Name =~ /\.$/)  {
(9)           if (&User-Name =~ /\.$/)   -> FALSE
(9)           if (&User-Name =~ /@\./)  {
(9)           if (&User-Name =~ /@\./)   -> FALSE
(9)         } # if (&User-Name)  = notfound
(9)       } # policy filter_username = notfound
(9)       [chap] = noop
(9)       [mschap] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "user001", looking up realm NULL
(9) suffix: No such realm "NULL"
(9)       [suffix] = noop
(9)       update control {
(9)         &Proxy-To-Realm := LOCAL
(9)       } # update control = noop
(9) eap: Peer sent EAP Response (code 2) ID 9 length 6
(9) eap: No EAP Start, assuming it's an on-going EAP conversation
(9)       [eap] = updated
(9)       [files] = noop
rlm_ldap (ldap): Reserved connection (2)
(9) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(9) ldap:    --> (uid=user001)
(9) ldap: Performing search in "dc=home" with filter "(uid=user001)",
scope "sub"
(9) ldap: Waiting for search result...
(9) ldap: User object found at DN "uid=user001,ou=test,dc=home"
(9) ldap: Processing user attributes
(9) ldap: control:My-Raw-Password += 0x506173735c313030776f7264
rlm_ldap (ldap): Released connection (2)
(9)       [ldap] = updated
(9)       if (control:My-Raw-Password) {
(9)       if (control:My-Raw-Password)  -> TRUE
(9)       if (control:My-Raw-Password)  {
(9)         update control {
(9)           EXPAND %{string:control:My-Raw-Password}
(9)              --> Pass\\100word
(9)           Cleartext-Password := Pass\100word
(9)         } # update control = noop
(9)       } # if (control:My-Raw-Password)  = noop
(9)       [expiration] = noop
(9)       [logintime] = noop
(9) pap: WARNING: Auth-Type already set.  Not setting to PAP
(9)       [pap] = noop
(9)     } # authorize = updated
(9)   Found Auth-Type = eap
(9)   # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel
(9)     authenticate {
(9) eap: Expiring EAP session with state 0xc584a370c48db988
(9) eap: Finished EAP session with state 0xc584a370c48db988
(9) eap: Previous EAP request found for state 0xc584a370c48db988,
released from the list
(9) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(9) eap: Calling submodule eap_mschapv2 to process data
(9) eap: Sending EAP Success (code 3) ID 9 length 4
(9) eap: Freeing handler
(9)       [eap] = ok
(9)     } # authenticate = ok
(9)   # Executing section post-auth from file
/usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel
(9)     post-auth {
(9)       if (0) {
(9)       if (0)  -> FALSE
(9)     } # post-auth = noop
(9)   Login OK: [user001] (from client all-network port 0 via TLS tunnel)
(9) } # server inner-tunnel
(9) Virtual server sending reply
(9)   MS-MPPE-Encryption-Policy = Encryption-Allowed
(9)   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(9)   MS-MPPE-Send-Key = 0xb261591c07265790cf99d2f1e0545d3d
(9)   MS-MPPE-Recv-Key = 0x81ec95e63affa7e6d3f8302e65c7d844
(9)   EAP-Message = 0x03090004
(9)   Message-Authenticator = 0x00000000000000000000000000000000
(9)   User-Name = "user001"
(9) eap_peap: Got tunneled reply code 2
(9) eap_peap:   MS-MPPE-Encryption-Policy = Encryption-Allowed
(9) eap_peap:   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(9) eap_peap:   MS-MPPE-Send-Key = 0xb261591c07265790cf99d2f1e0545d3d
(9) eap_peap:   MS-MPPE-Recv-Key = 0x81ec95e63affa7e6d3f8302e65c7d844
(9) eap_peap:   EAP-Message = 0x03090004
(9) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(9) eap_peap:   User-Name = "user001"
(9) eap_peap: Got tunneled reply RADIUS code 2
(9) eap_peap:   MS-MPPE-Encryption-Policy = Encryption-Allowed
(9) eap_peap:   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(9) eap_peap:   MS-MPPE-Send-Key = 0xb261591c07265790cf99d2f1e0545d3d
(9) eap_peap:   MS-MPPE-Recv-Key = 0x81ec95e63affa7e6d3f8302e65c7d844
(9) eap_peap:   EAP-Message = 0x03090004
(9) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(9) eap_peap:   User-Name = "user001"
(9) eap_peap: Tunneled authentication was successful
(9) eap_peap: SUCCESS
(9) eap: Sending EAP Request (code 1) ID 10 length 43
(9) eap: EAP session adding &reply:State = 0x63bfa5766ab5bc7c
(9)     [eap] = handled
(9)   } # authenticate = handled
(9) Using Post-Auth-Type Challenge
(9) # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(9)   Challenge { ... } # empty sub-section is ignored
(9) Sent Access-Challenge Id 9 from 192.168.103.2:1812 to
192.168.103.4:54191 length 0
(9)   EAP-Message =
0x010a002b19001703010020a18d4b8dcce841815e59f59fa1e1f6d56c0be28e0f32e4b9db7a4fca8e1070b5
(9)   Message-Authenticator = 0x00000000000000000000000000000000
(9)   State = 0x63bfa5766ab5bc7ce3622035b8b7b965
(9) Finished request
Waking up in 4.9 seconds.
(10) Received Access-Request Id 10 from 192.168.103.4:54191 to
192.168.103.2:1812 length 208
(10)   User-Name = "user001"
(10)   NAS-IP-Address = 127.0.0.1
(10)   Calling-Station-Id = "02-00-00-00-00-01"
(10)   Framed-MTU = 1400
(10)   NAS-Port-Type = Wireless-802.11
(10)   Connect-Info = "CONNECT 11Mbps 802.11b"
(10)   EAP-Message =
0x020a005019001703010020604baa9a9c1f7ccf5c12b4b6cb2d2743a641271b6079cc2d96b29d1c98cafc951703010020bac850dd1044527eb2b2f06faed0ac95926ec491713ddd8fee861dd7921bf4c5
(10)   State = 0x63bfa5766ab5bc7ce3622035b8b7b965
(10)   Message-Authenticator = 0xfab068129d89bd1ec512d2ff0991b4a8
(10) session-state: No cached attributes
(10) # Executing section authorize from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(10)   authorize {
(10)     policy filter_username {
(10)       if (&User-Name) {
(10)       if (&User-Name)  -> TRUE
(10)       if (&User-Name)  {
(10)         if (&User-Name =~ / /) {
(10)         if (&User-Name =~ / /)  -> FALSE
(10)         if (&User-Name =~ /@[^@]*@/ ) {
(10)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(10)         if (&User-Name =~ /\.\./ ) {
(10)         if (&User-Name =~ /\.\./ )  -> FALSE
(10)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(10)         if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))   -> FALSE
(10)         if (&User-Name =~ /\.$/)  {
(10)         if (&User-Name =~ /\.$/)   -> FALSE
(10)         if (&User-Name =~ /@\./)  {
(10)         if (&User-Name =~ /@\./)   -> FALSE
(10)       } # if (&User-Name)  = notfound
(10)     } # policy filter_username = notfound
(10)     [preprocess] = ok
(10)     [chap] = noop
(10)     [mschap] = noop
(10)     [digest] = noop
(10) suffix: Checking for suffix after "@"
(10) suffix: No '@' in User-Name = "user001", looking up realm NULL
(10) suffix: No such realm "NULL"
(10)     [suffix] = noop
(10) eap: Peer sent EAP Response (code 2) ID 10 length 80
(10) eap: Continuing tunnel setup
(10)     [eap] = ok
(10)   } # authorize = ok
(10) Found Auth-Type = eap
(10) # Executing group from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(10)   authenticate {
(10) eap: Expiring EAP session with state 0x63bfa5766ab5bc7c
(10) eap: Finished EAP session with state 0x63bfa5766ab5bc7c
(10) eap: Previous EAP request found for state 0x63bfa5766ab5bc7c,
released from the list
(10) eap: Peer sent packet with method EAP PEAP (25)
(10) eap: Calling submodule eap_peap to process data
(10) eap_peap: Continuing EAP-TLS
(10) eap_peap: [eaptls verify] = ok
(10) eap_peap: Done initial handshake
(10) eap_peap: [eaptls process] = ok
(10) eap_peap: Session established.  Decoding tunneled attributes
(10) eap_peap: PEAP state send tlv success
(10) eap_peap: Received EAP-TLV response
(10) eap_peap: Success
(10) eap: Sending EAP Success (code 3) ID 10 length 4
(10) eap: Freeing handler
(10)     [eap] = ok
(10)   } # authenticate = ok
(10) # Executing section post-auth from file
/usr/local/radius3017/etc/raddb/sites-enabled/default
(10)   post-auth {
(10)     update {
(10)       No attributes updated
(10)     } # update = noop
(10)     [exec] = noop
(10)     policy remove_reply_message_if_eap {
(10)       if (&reply:EAP-Message && &reply:Reply-Message) {
(10)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(10)       else {
(10)         [noop] = noop
(10)       } # else = noop
(10)     } # policy remove_reply_message_if_eap = noop
(10)   } # post-auth = noop
(10) Login OK: [user001] (from client all-network port 0 cli 02-00-00-00-00-01)
(10) Sent Access-Accept Id 10 from 192.168.103.2:1812 to
192.168.103.4:54191 length 0
(10)   MS-MPPE-Recv-Key =
0x1fee4bf0ece58ae0c0893933e3e1a6c162af33f3ac2e218ebbb8d7f0a2e10be6
(10)   MS-MPPE-Send-Key =
0xe622ff5fcf6ba4042a4e69a9a479e4d321a6ad0753cd95678024a9ef2dc5eb9c
(10)   EAP-Message = 0x030a0004
(10)   Message-Authenticator = 0x00000000000000000000000000000000
(10)   User-Name = "user001"
(10) Finished request
Waking up in 4.9 seconds.

2018-06-28 9:27 GMT+09:00 kaoru eto <etokaoru.frml@gmail.com>:
...
Thank you, Alan.
...
You can map the LDAP password to a RADIUS attribute of type "octets".  It will then the copied verbatim.
Then, copy that attribute to Cleartext-Password.  I *think* it will work.
I'll try it.
etokaoru
2018-06-28 6:01 GMT+09:00 Alan DeKok <aland@deployingradius.com>:
...
On Jun 27, 2018, at 3:25 AM, kaoru eto <etokaoru.frml@gmail.com> wrote:
...
I am trying to use backslash in userPassword like 'Pass\100word'.
Unfortunately, a bare backslash isn't really supported.  The server needs backslashes in order to escape *other* special characters in the password.
e.g. quotation marks.
...
3.what you expect the server to do
Access-Accept with password 'Pass\100word'.
Access-Reject with password 'Pass@word'.
Because "\100" is ASCII "@".
...
I tried changing single backslash 'Pass\100word' to double backslash
'Pass\\100word' on the LDAP server, and got Access-Accept with
password 'Pass\100word'.
That's how it works.
...
But, we hardly control this problem by changing the userPassword
attribute rules of LDAP server, because other systems which we can not
control use the same LDAP server.
Is there any workaround in freeradius configurations?
You can map the LDAP password to a RADIUS attribute of type "octets".  It will then the copied verbatim.
Then, copy that attribute to Cleartext-Password.  I *think* it will work.
Edit raddb/dictionary, and add:
ATTRIBUTE My-Raw-Password 3003 octets
e.g. edit raddb/mods-enabled/ldap
Replace:
control:Password-With-Header    += 'userPassword'
With:
control:My-Raw-Password         += 'userPassword'
And then in the "authorize" section, after "ldap", do:
if (control:My-Raw-Password) {
                update control {
                        Cleartext-Password := &My-Raw-Password
                }
        }
That should copy it over without escaping the backslash.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html