Hello again, First , Thank you for your Help. I read you link and remove old cert and do MAKE. When try to connect i cant connect, similar fail. Only need do "make" ??? Dont need copy certs to a directory ?? next steps ??? Recent guide ??? Thank you in advanced. My new output. root@ubunturadius:/usr/local/etc/raddb/certs# radiusd -X Server was built with: accounting : yes authentication : yes ascend-binary-attributes : yes coa : yes control-socket : yes detail : yes dhcp : yes dynamic-clients : yes osfc2 : no proxy : yes regex-pcre : no regex-posix : yes regex-posix-extended : yes session-management : yes stats : yes tcp : yes threads : yes tls : yes unlang : yes vmps : yes developer : no Server core libs: freeradius-server : 3.0.11 talloc : 2.0.* ssl : 1.0.2g release Endianness: little Compilation flags: cppflags : cflags : -I/home/user/freeradius-server-3.0.11 -I/home/user/freeradius-serve r-3.0.11/src -include /home/user/freeradius-server-3.0.11/src/freeradius-devel/a utoconf.h -include /home/user/freeradius-server-3.0.11/src/freeradius-devel/buil d.h -include /home/user/freeradius-server-3.0.11/src/freeradius-devel/features.h -include /home/user/freeradius-server-3.0.11/src/freeradius-devel/radpaths.h -f no-strict-aliasing -g -O2 -Wall -std=c99 -D_GNU_SOURCE -D_REENTRANT -D_POSIX_PTH READ_SEMANTICS -DOPENSSL_NO_KRB5 -DNDEBUG -DIS_MODULE=1 ldflags : libs : -lcrypto -lssl -ltalloc -lnsl -lresolv -ldl -lpthread Copyright (C) 1999-2016 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/local/share/freeradius/dictionary including dictionary file /usr/local/share/freeradius/dictionary.dhcp including dictionary file /usr/local/share/freeradius/dictionary.vqp including dictionary file /usr/local/etc/raddb/dictionary including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/mods-enabled/ including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter including configuration file /usr/local/etc/raddb/mods-enabled/chap including configuration file /usr/local/etc/raddb/mods-enabled/preprocess including configuration file /usr/local/etc/raddb/mods-enabled/soh including configuration file /usr/local/etc/raddb/mods-enabled/always including configuration file /usr/local/etc/raddb/mods-enabled/mschap including configuration file /usr/local/etc/raddb/mods-enabled/eap including configuration file /usr/local/etc/raddb/mods-enabled/utf8 including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap including configuration file /usr/local/etc/raddb/mods-enabled/files including configuration file /usr/local/etc/raddb/mods-enabled/exec including configuration file /usr/local/etc/raddb/mods-enabled/digest including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth including configuration file /usr/local/etc/raddb/mods-enabled/pap including configuration file /usr/local/etc/raddb/mods-enabled/radutmp including configuration file /usr/local/etc/raddb/mods-enabled/unix including configuration file /usr/local/etc/raddb/mods-enabled/passwd including configuration file /usr/local/etc/raddb/mods-enabled/replicate including configuration file /usr/local/etc/raddb/mods-enabled/realm including configuration file /usr/local/etc/raddb/mods-enabled/unpack including configuration file /usr/local/etc/raddb/mods-enabled/expiration including configuration file /usr/local/etc/raddb/mods-enabled/echo including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients including configuration file /usr/local/etc/raddb/mods-enabled/dhcp including configuration file /usr/local/etc/raddb/mods-enabled/detail.log including configuration file /usr/local/etc/raddb/mods-enabled/detail including configuration file /usr/local/etc/raddb/mods-enabled/logintime including configuration file /usr/local/etc/raddb/mods-enabled/linelog including configuration file /usr/local/etc/raddb/mods-enabled/expr including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp including files in directory /usr/local/etc/raddb/policy.d/ including configuration file /usr/local/etc/raddb/policy.d/filter including configuration file /usr/local/etc/raddb/policy.d/canonicalization including configuration file /usr/local/etc/raddb/policy.d/eap including configuration file /usr/local/etc/raddb/policy.d/control including configuration file /usr/local/etc/raddb/policy.d/abfab-tr including configuration file /usr/local/etc/raddb/policy.d/cui including configuration file /usr/local/etc/raddb/policy.d/debug including configuration file /usr/local/etc/raddb/policy.d/operator-name including configuration file /usr/local/etc/raddb/policy.d/dhcp including configuration file /usr/local/etc/raddb/policy.d/accounting including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/default main { security { allow_core_dumps = no } name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" } main { name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" sbindir = "/usr/local/sbin" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes allow_vulnerable_openssl = "no" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client rbb { ipaddr = 192.168.1.0/24 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = ntlm_auth # Creating Auth-Type = eap # Creating Auth-Type = digest radiusd: #### Instantiating modules #### modules { # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods- enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-e nabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /usr/local/etc/raddb/mo ds-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /usr/local/etc/raddb /mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challeng e" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /usr/local/etc/ra ddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_resp onse" key = "%{User-Name}" relaxed = no } # Loaded module rlm_chap # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap # Loaded module rlm_preprocess # Loading module "preprocess" from file /usr/local/etc/raddb/mods-enabled/prep rocess preprocess { huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups" hints = "/usr/local/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_soh # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_always # Loading module "reject" from file /usr/local/etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /usr/local/etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /usr/local/etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /usr/local/etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /usr/local/etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /usr/local/etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_mschap # Loading module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:Use r-Name:-None} --domain=%{%{mschap:NT-Domain}:-MYREALDOMAIN} --challenge=%{mschap:Chall enge:-00} --nt-response=%{mschap:NT-Response:-00}" passchange { } allow_retry = yes } # Loaded module rlm_eap # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_utf8 # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8 # Loaded module rlm_cache # Loading module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache _eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_files # Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files files { filename = "/usr/local/etc/raddb/mods-config/files/authorize" acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_exec # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_digest # Loading module "digest" from file /usr/local/etc/raddb/mods-enabled/digest # Loading module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_ auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=MYREALDOMAIN --usernam e=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_radutmp # Loading module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_unix # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_passwd # Loading module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/pass wd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_replicate # Loading module "replicate" from file /usr/local/etc/raddb/mods-enabled/repli cate # Loaded module rlm_realm # Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/re alm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_unpack # Loading module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack # Loaded module rlm_expiration # Loading module "expiration" from file /usr/local/etc/raddb/mods-enabled/expi ration # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled /dynamic_clients # Loaded module rlm_dhcp # Loading module "dhcp" from file /usr/local/etc/raddb/mods-enabled/dhcp # Loaded module rlm_detail # Loading module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail .log detail auth_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address} :-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detai l.log detail reply_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address} :-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/d etail.log detail pre_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address} :-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/ detail.log detail post_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address} :-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "detail" from file /usr/local/etc/raddb/mods-enabled/detail detail { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address} :-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_logintime # Loading module "logintime" from file /usr/local/etc/raddb/mods-enabled/login time logintime { minimum_timeout = 60 } # Loaded module rlm_linelog # Loading module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog linelog { filename = "/usr/local/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/ linelog linelog log_accounting { filename = "/usr/local/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_expr # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ 0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradut mp radutmp sradutmp { filename = "/usr/local/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } instantiate { } # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb /mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/ mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/ra ddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject [/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "Free RADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "Free RADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc /raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challe nge # Instantiating module "attr_filter.accounting_response" from file /usr/local/ etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_re sponse # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enable d/preprocess reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/al ways # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/alwa ys # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/a lways # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/a lways # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/ always # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/ always # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/alwa ys # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/a lways # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/ms chap rlm_mschap (mschap): authenticating by calling 'ntlm_auth' # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" ca_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/usr/local/etc/raddb/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled /cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/fil es reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enable d/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/rea lm # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/re alm # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enab led/realm # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/ realm # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enable d/expiration # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/ detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail out put # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled /detail.log # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-ena bled/detail.log # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-en abled/detail.log # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/de tail # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled /logintime # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/l inelog # Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-en abled/linelog } # modules radiusd: #### Loading Virtual Servers #### server { # from file /usr/local/etc/raddb/radiusd.conf } # server server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunne l # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel server default { # from file /usr/local/etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 55420 Listening on proxy address :: port 40231 Ready to process requests (0) Received Access-Request Id 47 from 192.168.1.103:52056 to 192.168.1.26:1812 length 179 (0) User-Name = "MYREALUSER" (0) NAS-IP-Address = 192.168.1.103 (0) NAS-Identifier = "0418d68032b7" (0) NAS-Port = 0 (0) Called-Station-Id = "04-18-D6-82-32-B7:Test_MYREALAPNAME" (0) Calling-Station-Id = "28-E3-47-0E-0A-F7" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Connect-Info = "CONNECT 0Mbps 802.11b" (0) EAP-Message = 0x02e60010016a6f73652e63657065726f (0) Message-Authenticator = 0x3564fa0b8a6a6bc24fb7222c5362d796 (0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/d efault (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALS E (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "MYREALUSER", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 230 length 16 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_peap to process data (0) eap_peap: Initiating new EAP-TLS session (0) eap_peap: Flushing SSL sessions (of #0) (0) eap_peap: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 231 length 6 (0) eap: EAP session adding &reply:State = 0xfcf4125dfc130b95 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (0) Sent Access-Challenge Id 47 from 192.168.1.26:1812 to 192.168.1.103:52056 le ngth 0 (0) EAP-Message = 0x01e700061920 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xfcf4125dfc130b956e1f80ff8145fab0 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 48 from 192.168.1.103:52056 to 192.168.1.26:1812 length 286 (1) User-Name = "MYREALUSER" (1) NAS-IP-Address = 192.168.1.103 (1) NAS-Identifier = "0418d68032b7" (1) NAS-Port = 0 (1) Called-Station-Id = "04-18-D6-82-32-B7:Test_MYREALAPNAME" (1) Calling-Station-Id = "28-E3-47-0E-0A-F7" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Connect-Info = "CONNECT 0Mbps 802.11b" (1) EAP-Message = 0x02e7006919800000005f160301005a010000560301573ada38c85e948e 4fe616045b685a4194660fbd84473e5cd579dbee6d41a403000018002f00350005000ac013c014c0 09c00a003200380013000401000015ff01000100000a0006000400170018000b00020100 (1) State = 0xfcf4125dfc130b956e1f80ff8145fab0 (1) Message-Authenticator = 0x5a7a3f0bfb6c21ff81dd04acb8be7552 (1) session-state: No cached attributes (1) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/d efault (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALS E (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "MYREALUSER", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 231 length 105 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xfcf4125dfc130b95 (1) eap: Finished EAP session with state 0xfcf4125dfc130b95 (1) eap: Previous EAP request found for state 0xfcf4125dfc130b95, released from the list (1) eap: Peer sent packet with method EAP PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Continuing EAP-TLS (1) eap_peap: Peer indicated complete TLS record size will be 95 bytes (1) eap_peap: Got complete TLS record (95 bytes) (1) eap_peap: [eaptls verify] = length included (1) eap_peap: (other): before/accept initialization (1) eap_peap: TLS_accept: before/accept initialization (1) eap_peap: <<< recv TLS 1.0 Handshake [length 005a], ClientHello (1) eap_peap: TLS_accept: unknown state (1) eap_peap: >>> send TLS 1.0 Handshake [length 0051], ServerHello (1) eap_peap: TLS_accept: unknown state (1) eap_peap: >>> send TLS 1.0 Handshake [length 08d3], Certificate (1) eap_peap: TLS_accept: unknown state (1) eap_peap: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone (1) eap_peap: TLS_accept: unknown state (1) eap_peap: TLS_accept: unknown state (1) eap_peap: TLS_accept: unknown state (1) eap_peap: TLS_accept: Need to read more data: unknown state (1) eap_peap: TLS_accept: Need to read more data: unknown state (1) eap_peap: In SSL Handshake Phase (1) eap_peap: In SSL Accept mode (1) eap_peap: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 232 length 1004 (1) eap: EAP session adding &reply:State = 0xfcf4125dfd1c0b95 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (1) Sent Access-Challenge Id 48 from 192.168.1.26:1812 to 192.168.1.103:52056 le ngth 0 (1) EAP-Message = 0x01e803ec19c00000093716030100510200004d0301aa4f5a28449f0013 9be0ebeb04df14cfc66c64966e78de2896baabf2d799ace02092005ef1c50dbe3ffbac71075158c6 4b3823fdbf0fed8f91b084a6026111fdd5002f000005ff0100010016030108d30b0008cf0008cc00 03de308203da308202c2 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xfcf4125dfd1c0b956e1f80ff8145fab0 (1) Finished request Waking up in 2.9 seconds. (2) Received Access-Request Id 49 from 192.168.1.103:52056 to 192.168.1.26:1812 length 187 (2) User-Name = "MYREALUSER" (2) NAS-IP-Address = 192.168.1.103 (2) NAS-Identifier = "0418d68032b7" (2) NAS-Port = 0 (2) Called-Station-Id = "04-18-D6-82-32-B7:Test_MYREALAPNAME" (2) Calling-Station-Id = "28-E3-47-0E-0A-F7" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Connect-Info = "CONNECT 0Mbps 802.11b" (2) EAP-Message = 0x02e800061900 (2) State = 0xfcf4125dfd1c0b956e1f80ff8145fab0 (2) Message-Authenticator = 0x44bea443340c3ac8c93719020f67b872 (2) session-state: No cached attributes (2) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/d efault (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALS E (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "MYREALUSER", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 232 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xfcf4125dfd1c0b95 (2) eap: Finished EAP session with state 0xfcf4125dfd1c0b95 (2) eap: Previous EAP request found for state 0xfcf4125dfd1c0b95, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer ACKed our handshake fragment (2) eap_peap: [eaptls verify] = request (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 233 length 1000 (2) eap: EAP session adding &reply:State = 0xfcf4125dfe1d0b95 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (2) Sent Access-Challenge Id 49 from 192.168.1.26:1812 to 192.168.1.103:52056 le ngth 0 (2) EAP-Message = 0x01e903e81940524b34ccceb1c849844a93b64082584444dee02f41ff41 2bd078c15fdd6f2e41b602ba9daa393ae1fdca6a9a69d3d6d17a396564eb104ebdff0a93501c0ab0 9dc163667e5d06d2ee3090b1955c24769f0ae593a1bce5a23bdb245f4ee4d89ab43f0004e8308204 e4308203cca003020102 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xfcf4125dfe1d0b956e1f80ff8145fab0 (2) Finished request Waking up in 2.9 seconds. (3) Received Access-Request Id 50 from 192.168.1.103:52056 to 192.168.1.26:1812 length 187 (3) User-Name = "MYREALUSER" (3) NAS-IP-Address = 192.168.1.103 (3) NAS-Identifier = "0418d68032b7" (3) NAS-Port = 0 (3) Called-Station-Id = "04-18-D6-82-32-B7:Test_MYREALAPNAME" (3) Calling-Station-Id = "28-E3-47-0E-0A-F7" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Connect-Info = "CONNECT 0Mbps 802.11b" (3) EAP-Message = 0x02e900061900 (3) State = 0xfcf4125dfe1d0b956e1f80ff8145fab0 (3) Message-Authenticator = 0xcf3abb2b22744d10910ffe92f1f9bf58 (3) session-state: No cached attributes (3) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/d efault (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALS E (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "MYREALUSER", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 233 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xfcf4125dfe1d0b95 (3) eap: Finished EAP session with state 0xfcf4125dfe1d0b95 (3) eap: Previous EAP request found for state 0xfcf4125dfe1d0b95, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 234 length 377 (3) eap: EAP session adding &reply:State = 0xfcf4125dff1e0b95 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) Post-Auth-Type sub-section not found. Ignoring. (3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (3) Sent Access-Challenge Id 50 from 192.168.1.26:1812 to 192.168.1.103:52056 le ngth 0 (3) EAP-Message = 0x01ea017919007479820900ae2fdd206289f5c8300f0603551d130101ff 040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e657861 6d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b05000382 0101009a61c561bc5df1 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xfcf4125dff1e0b956e1f80ff8145fab0 (3) Finished request Waking up in 2.8 seconds. (4) Received Access-Request Id 51 from 192.168.1.103:52056 to 192.168.1.26:1812 length 198 (4) User-Name = "MYREALUSER" (4) NAS-IP-Address = 192.168.1.103 (4) NAS-Identifier = "0418d68032b7" (4) NAS-Port = 0 (4) Called-Station-Id = "04-18-D6-82-32-B7:Test_MYREALAPNAME" (4) Calling-Station-Id = "28-E3-47-0E-0A-F7" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Connect-Info = "CONNECT 0Mbps 802.11b" (4) EAP-Message = 0x02ea001119800000000715030100020230 (4) State = 0xfcf4125dff1e0b956e1f80ff8145fab0 (4) Message-Authenticator = 0x8706b7e95a9c0285806b11dc86e18033 (4) session-state: No cached attributes (4) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/d efault (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALS E (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /@\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "MYREALUSER", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 234 length 17 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xfcf4125dff1e0b95 (4) eap: Finished EAP session with state 0xfcf4125dff1e0b95 (4) eap: Previous EAP request found for state 0xfcf4125dff1e0b95, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer indicated complete TLS record size will be 7 bytes (4) eap_peap: Got complete TLS record (7 bytes) (4) eap_peap: [eaptls verify] = length included (4) eap_peap: <<< recv TLS 1.0 Alert [length 0002], fatal unknown_ca (4) eap_peap: ERROR: TLS Alert read:fatal:unknown CA (4) eap_peap: ERROR: TLS_accept: Failed in unknown state (4) eap_peap: ERROR: SSL says: error:14094418:SSL routines:ssl3_read_bytes:tlsv1 alert unknown ca (4) eap_peap: ERROR: SSL_read failed inside of TLS (-1), TLS session failed (4) eap_peap: ERROR: TLS receive handshake failed during operation (4) eap_peap: ERROR: [eaptls process] = fail (4) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (4) eap: Sending EAP Failure (code 4) ID 234 length 4 (4) eap: Failed in EAP select (4) [eap] = invalid (4) } # authenticate = invalid (4) Failed to authenticate the user (4) Using Post-Auth-Type Reject (4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (4) Post-Auth-Type REJECT { (4) attr_filter.access_reject: EXPAND %{User-Name} (4) attr_filter.access_reject: --> MYREALUSER (4) attr_filter.access_reject: Matched entry DEFAULT at line 11 (4) [attr_filter.access_reject] = updated (4) [eap] = noop (4) policy remove_reply_message_if_eap { (4) if (&reply:EAP-Message && &reply:Reply-Message) { (4) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (4) else { (4) [noop] = noop (4) } # else = noop (4) } # policy remove_reply_message_if_eap = noop (4) } # Post-Auth-Type REJECT = updated (4) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (4) Sending delayed response (4) Sent Access-Reject Id 51 from 192.168.1.26:1812 to 192.168.1.103:52056 lengt h 44 (4) EAP-Message = 0x04ea0004 (4) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 1.8 seconds. (5) Received Access-Request Id 52 from 192.168.1.103:52056 to 192.168.1.26:1812 length 169 (5) User-Name = "MYREALDOMAIN" (5) NAS-IP-Address = 192.168.1.103 (5) NAS-Identifier = "0418d68032b7" (5) NAS-Port = 0 (5) Called-Station-Id = "04-18-D6-82-32-B7:Test_MYREALAPNAME" (5) Calling-Station-Id = "28-E3-47-0E-0A-F7" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Connect-Info = "CONNECT 0Mbps 802.11b" (5) EAP-Message = 0x0289000b01736f6c74656c (5) Message-Authenticator = 0xfe3b4e0f1ad528dc6a65a19d4e1a7c9f (5) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/d efault (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALS E (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /@\./) { (5) if (&User-Name =~ /@\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "MYREALDOMAIN", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 137 length 11 (5) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Peer sent packet with method EAP Identity (1) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Initiating new EAP-TLS session (5) eap_peap: [eaptls start] = request (5) eap: Sending EAP Request (code 1) ID 138 length 6 (5) eap: EAP session adding &reply:State = 0x114c10a411c60923 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) Post-Auth-Type sub-section not found. Ignoring. (5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (5) Sent Access-Challenge Id 52 from 192.168.1.26:1812 to 192.168.1.103:52056 le ngth 0 (5) EAP-Message = 0x018a00061920 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x114c10a411c6092321cf28518b18b493 (5) Finished request Waking up in 0.5 seconds. (6) Received Access-Request Id 53 from 192.168.1.103:52056 to 192.168.1.26:1812 length 182 (6) User-Name = "MYREALDOMAIN" (6) NAS-IP-Address = 192.168.1.103 (6) NAS-Identifier = "0418d68032b7" (6) NAS-Port = 0 (6) Called-Station-Id = "04-18-D6-82-32-B7:Test_MYREALAPNAME" (6) Calling-Station-Id = "28-E3-47-0E-0A-F7" (6) Framed-MTU = 1400 (6) NAS-Port-Type = Wireless-802.11 (6) Connect-Info = "CONNECT 0Mbps 802.11b" (6) EAP-Message = 0x028a00060311 (6) State = 0x114c10a411c6092321cf28518b18b493 (6) Message-Authenticator = 0xfe4181d741420e04950e520ddaaaaabb (6) session-state: No cached attributes (6) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/d efault (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALS E (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "MYREALDOMAIN", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 138 length 6 (6) eap: No EAP Start, assuming it's an on-going EAP conversation (6) [eap] = updated (6) [files] = noop (6) [expiration] = noop (6) [logintime] = noop (6) pap: WARNING: No "known good" password found for the user. Not setting Auth -Type (6) pap: WARNING: Authentication will fail unless a "known good" password is ava ilable (6) [pap] = noop (6) } # authorize = updated (6) Found Auth-Type = eap (6) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x114c10a411c60923 (6) eap: Finished EAP session with state 0x114c10a411c60923 (6) eap: Previous EAP request found for state 0x114c10a411c60923, released from the list (6) eap: Peer sent packet with method EAP NAK (3) (6) eap: Found mutually acceptable type LEAP (17) (6) eap: Calling submodule eap_leap to process data (6) eap_leap: Stage 2 (6) eap_leap: Issuing AP Challenge (6) eap_leap: ERROR: Successfully initiated (6) eap: Sending EAP Request (code 1) ID 139 length 22 (6) eap: EAP session adding &reply:State = 0x114c10a410c70123 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) Post-Auth-Type sub-section not found. Ignoring. (6) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (6) Sent Access-Challenge Id 53 from 192.168.1.26:1812 to 192.168.1.103:52056 le ngth 0 (6) EAP-Message = 0x018b001611010008d8441ffa2076a8d7736f6c74656c (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x114c10a410c7012321cf28518b18b493 (6) Finished request Waking up in 0.5 seconds. (7) Received Access-Request Id 54 from 192.168.1.103:52056 to 192.168.1.26:1812 length 214 (7) User-Name = "MYREALDOMAIN" (7) NAS-IP-Address = 192.168.1.103 (7) NAS-Identifier = "0418d68032b7" (7) NAS-Port = 0 (7) Called-Station-Id = "04-18-D6-82-32-B7:Test_MYREALAPNAME" (7) Calling-Station-Id = "28-E3-47-0E-0A-F7" (7) Framed-MTU = 1400 (7) NAS-Port-Type = Wireless-802.11 (7) Connect-Info = "CONNECT 0Mbps 802.11b" (7) EAP-Message = 0x028b002611010018834db18d272184253ea09e5497da73b330f71f717c c63bd6736f6c74656c (7) State = 0x114c10a410c7012321cf28518b18b493 (7) Message-Authenticator = 0xfe0a1d51b2cd2e93e30464a77871659b (7) session-state: No cached attributes (7) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/d efault (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALS E (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /@\./) { (7) if (&User-Name =~ /@\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "MYREALDOMAIN", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 139 length 38 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) [files] = noop (7) [expiration] = noop (7) [logintime] = noop (7) pap: WARNING: No "known good" password found for the user. Not setting Auth -Type (7) pap: WARNING: Authentication will fail unless a "known good" password is ava ilable (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = eap (7) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x114c10a410c70123 (7) eap: Finished EAP session with state 0x114c10a410c70123 (7) eap: Previous EAP request found for state 0x114c10a410c70123, released from the list (7) eap: Peer sent packet with method EAP LEAP (17) (7) eap: Calling submodule eap_leap to process data (7) eap_leap: ERROR: No Cleartext-Password or NT-Password configured for this us er (7) eap: ERROR: Failed continuing EAP LEAP (17) session. EAP sub-module failed (7) eap: Sending EAP Failure (code 4) ID 139 length 4 (7) eap: Failed in EAP select (7) [eap] = invalid (7) } # authenticate = invalid (7) Failed to authenticate the user (7) Using Post-Auth-Type Reject (7) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (7) Post-Auth-Type REJECT { (7) attr_filter.access_reject: EXPAND %{User-Name} (7) attr_filter.access_reject: --> MYREALDOMAIN (7) attr_filter.access_reject: Matched entry DEFAULT at line 11 (7) [attr_filter.access_reject] = updated (7) [eap] = noop (7) policy remove_reply_message_if_eap { (7) if (&reply:EAP-Message && &reply:Reply-Message) { (7) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (7) else { (7) [noop] = noop (7) } # else = noop (7) } # policy remove_reply_message_if_eap = noop (7) } # Post-Auth-Type REJECT = updated (7) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.2 seconds. (0) Cleaning up request packet ID 47 with timestamp +72 Waking up in 0.4 seconds. (7) Sending delayed response (7) Sent Access-Reject Id 54 from 192.168.1.26:1812 to 192.168.1.103:52056 lengt h 44 (7) EAP-Message = 0x048b0004 (7) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 1.6 seconds. (1) Cleaning up request packet ID 48 with timestamp +75 (2) Cleaning up request packet ID 49 with timestamp +75 (3) Cleaning up request packet ID 50 with timestamp +75 (4) Cleaning up request packet ID 51 with timestamp +75 Waking up in 2.2 seconds. (5) Cleaning up request packet ID 52 with timestamp +77 (6) Cleaning up request packet ID 53 with timestamp +77 (7) Cleaning up request packet ID 54 with timestamp +77 Ready to process requests On Fri, May 13, 2016 at 1:13 PM, Phil Mayers <p.mayers@imperial.ac.uk> wrote:
On 13/05/16 11:53, Spider s wrote:
(4) eap_peap: ERROR: TLS Alert read:fatal:unknown CA
(4) eap_peap: ERROR: TLS_accept: Failed in unknown state
(4) eap_peap: ERROR: SSL says: error:14094418:SSL routines:ssl3_read_bytes:tlsv1 alert unknown ca
The client machine does not trust your server certificate.
See
http://deployingradius.com/documents/configuration/eap.html
...or copy the cert to the client and trust it. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html