Default users file has DEFAULT entries for that Service-Type and protocol. Default radiusd.conf uses files. You have changed the defaults and it's not working anymore. In default configuration make changes only to the ldap section and leave the rest as it was. Ivan Kalik Kalik Informatika ISP Dana 10/12/2007, "Lucien RENAULT" <loupitour@gmail.com> piše:
Hi, I'm running a configuration where a Cisco 1600 router is running a PPPoE server and check user passwords against a freeRadius server running under FreeBSD. This Radius server checks passwords against a LDAP database running on another BSD server. The authentication is working great, the Radius replies with an "Access-Accept" reply to the Cisco router but it seems that the router needs two attributes to accept this reply :
Service-Type = Framed-User, Framed-Protocol = PPP,
So I did the following configuration in users.conf :
DEFAULT Framed-Protocol == PPP Service-Type = Framed-User, Framed-Protocol = PPP, Fall-Through = Yes
But freeradius still replies with no attributes in Access-Accept packet... I read a lot of documentation about this and I'm quite confused since I don't really see any other mean to add attributes to replies...
Any Ideas ?
Thanks - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html