hello and thanks a lot for your help! i used your second proposal (just in case someone needs it): in freeradius.spec i added the following line after "%config(noreplace) /etc/raddb/attrs": %config /etc/raddb/example.pl with this line (and the changes mentioned in my first email, see below) building the rpm works perfectly. regards, markus Zitat von Andrew Teixeira <ateixeira@gmail.com>:
Hello, I'm no expert on freeradius, but I have done some extensive RPM packaging, so my suggestions are as follows:
At the end of the %install section of the SPEC file, just add a line stating "rm -f %{buildroot}/etc/raddb/example.pl". That will remove the unwanted file. - or - Add the /etc/raddb/example.pl to the %files section to add this file to the distribution, thus making it no longer an unpackaged file. - or - Add the following define to the SPEC file:
%define _unpackaged_files_terminate_build 0
I primarily package RPMs on Mandriva Linux, so I'm not sure if the third option is the same on SUSE, but you might try to give it a whirl since it is probably the easiest option to try. Basically, it still checks for the unpackaged files, but won't prevent the package from being built if unpackaged files are found. The most portable solutions, however, are the first two.
On 10/22/05, Markus Krause <krause@biochem.mpg.de> wrote:
hi list,
i tried to build an rpm-package for suse using freeradius-1.0.5 on both sles 9 and suse 10.0-oss with same results.
unfortunately it did not go smoothly, here is what i did and what happend: 1) i edited freeradius.spec: - correcting the version info in the second line from 1.0.2 to 1.0.5 - changing versino from 1.0.4 to 1.0.5 in the section with name, licence, group, etc. - in BuildRequires i removed "postgresql", "libnscd", "libzio". the reason for removing the last two was that i could not find them in sles9. does anyone know in which package they should be? but i think that the building problems do not depend on these.
2) at the end of "CFLAGS" in the section "%build" i added "--with-experimental-modules" (i need the sqlcounter module)
3) then i run "rpmbuild -ba freeradius.spec". at the end (i assume after compiling, on bundling the package) i get: +++++ Checking for unpackaged file(s): /usr/lib/rpm/check-files /var/tmp/freeradius-1.0.5-build error: Installed (but unpackaged) file(s) found: /etc/raddb/example.pl
RPM build errors: Installed (but unpackaged) file(s) found: /etc/raddb/example.pl ----- as i do not use/need rlm_perl i just uncommented the line containing this information (after "install-scripts:" in src/modules/rlm_perl/Makefile.in) the building is succesfull, and the installed package works correctly. what would the correct action and not a work-around?
regards, markus
-- Markus Krause email: krause@biochem.mpg.de Computing Center Tel.: 089 - 89 40 85 99 Group Lottspeich / Proteomics Fax.: 089 - 89 40 85 98
--------------------------------------------------------------------- This message was sent using https://webmail.biochem.mpg.de If you encounter any problems please report to rz-linux@biochem.mpg.de
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-- Markus Krause email: krause@biochem.mpg.de Computing Center Tel.: 089 - 89 40 85 99 Group Lottspeich / Proteomics Fax.: 089 - 89 40 85 98 --------------------------------------------------------------------- This message was sent using https://webmail.biochem.mpg.de If you encounter any problems please report to rz-linux@biochem.mpg.de