Unexpected Disconnect Message to NAS

18 Feb 2019

      Hi,

first of all apologies for maybe not seeing the obvious solution.

I have the following setup:
An OpenWRT AccessPoint with EAP configured authenticating against
freeradius with a mariadb backend. Accounting on freeradius is enabled to
cover two use cases:

1. restrict daily session time for users (working):
freeradius sends disconnect messages to my NAS (based on OpenWRT) by
checking the max-daily-session attribute.

2. restrict login time for users (not working)
user are only allowed to login at certain times.

In the accounting section I have the following sql check in order to send
disconnect messages to the NAS:

if ( "%{sql: SELECT IFNULL (SUM(AcctSessionTime),0) FROM radacct where
UserName='%{User-Name}'}" > "%{sql: SELECT value from radcheck where
username='%{User-Name}' and attribute='Max-Daily-Session'}" ) {
     update disconnect {
        &Acct-Session-Id = "%{Acct-Session-Id}"
        &User-Name = "%{User-Name}"
        &Calling-Station-Id = "%{Calling-Station-Id}"
                }
        }

The user I'm trying to login doesn't have the attribute Max-Daily-Session
in the radcheck table:

MariaDB [radius]> select * from radcheck where username='vlado';
+----+----------+--------------------+----+-------------+
| id | username | attribute          | op | value       |
+----+----------+--------------------+----+-------------+
|  2 | vlado    | Cleartext-Password | := | hello       |
| 10 | vlado    | Login-Time         | := | Al0001-2359 |
+----+----------+--------------------+----+-------------+
2 rows in set (0.00 sec)

Expected behaviour:
user can login according login-time attribute without having
max-daily-session attribute defined. the if statement should return false.

Actual behaviour:
the if statement always evaluates to 'True' and kicks the user out. Even
with an empty radacct table the statement evaluates to 'True'.

I have two questions:

1. How can I avoid defining Max-Daily-Sesion and login-time attributes for
the second use case (restrict login time for users)?
2. how to disconnect user based on defined login-time?

Thanks for any help in advance!

FreeRADIUS Version 3.0.12
Copyright (C) 1999-2016 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/sqlcounter
including configuration file
/etc/freeradius/3.0/mods-config/sql/counter/mysql/dailycounter.conf
including configuration file
/etc/freeradius/3.0/mods-config/sql/counter/mysql/monthlycounter.conf
including configuration file
/etc/freeradius/3.0/mods-config/sql/counter/mysql/noresetcounter.conf
including configuration file
/etc/freeradius/3.0/mods-config/sql/counter/mysql/expire_on_login.conf
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/sql
including configuration file
/etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file
/etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/coa
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/3.0/sites-enabled/default
main {
 security {
  user = "freerad"
  group = "freerad"
  allow_core_dumps = no
 }
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
 log {
  stripped_names = no
  auth = yes
  auth_badpass = no
  auth_goodpass = no
  colourise = yes
  msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
  max_attributes = 200
  reject_delay = 1.000000
  status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
  retry_delay = 5
  retry_count = 3
  default_fallback = no
  dead_time = 120
  wake_all_if_all_dead = no
 }
 home_server localhost {
  ipaddr = 127.0.0.1
  port = 1812
  type = "auth"
  secret = <<< secret >>>
  response_window = 20.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "status-server"
  ping_interval = 30
  check_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 120
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
 }
 home_server AP-2 {
  ipaddr = 192.168.1.2
  port = 3799
  type = "coa"
  secret = <<< secret >>>
  response_window = 30.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "none"
  ping_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 300
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
 }
 home_server AP-1 {
  ipaddr = 192.168.1.1
  port = 3799
  type = "coa"
  secret = <<< secret >>>
  response_window = 30.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "none"
  ping_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 300
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
 }
 home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
 }
 realm example.com {
auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
  ipaddr = 127.0.0.1
  require_message_authenticator = no
  secret = <<< secret >>>
  nas_type = "other"
  proto = "*"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client localhost_ipv6 {
  ipv6addr = ::1
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
Debugger not attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Auth-Type = digest
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
  unix {
  radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  filename =
"/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
  logintime {
  minimum_timeout = 60
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
  passwd etc_passwd {
  filename = "/etc/passwd"
  format = "*User-Name:Crypt-Password:"
  delimiter = ":"
  ignore_nislike = no
  ignore_empty = yes
  allow_multiple_keys = no
  hash_size = 100
  }
  # Loaded module rlm_exec
  # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
  exec echo {
  wait = yes
  program = "/bin/echo %{User-Name}"
  input_pairs = "request"
  output_pairs = "reply"
  shell_escape = yes
  }
  # Loaded module rlm_sqlcounter
  # Loading module "dailycounter" from file
/etc/freeradius/3.0/mods-enabled/sqlcounter
  sqlcounter dailycounter {
  sql_module_instance = "sql"
  key = "User-Name"
  query = "SELECT IFNULL(SUM(acctsessiontime -  GREATEST((%%b -
UNIX_TIMESTAMP(acctstarttime)), 0)),0)  FROM radacct WHERE username =
'%{User-Name}' AND  UNIX_TIMESTAMP(acctstarttime) + acctsessiontime > '%%b'"
  reset = "daily"
  counter_name = "Daily-Session-Time"
  check_name = "Max-Daily-Session"
  reply_name = "Session-Timeout"
  }
  # Loading module "monthlycounter" from file
/etc/freeradius/3.0/mods-enabled/sqlcounter
  sqlcounter monthlycounter {
  sql_module_instance = "sql"
  key = "User-Name"
  query = "SELECT SUM(acctsessiontime - GREATEST((%%b -
UNIX_TIMESTAMP(acctstarttime)), 0)) FROM radacct WHERE
username='%{User-Name}' AND UNIX_TIMESTAMP(acctstarttime) + acctsessiontime
...
'%%b'"
  reset = "monthly"
  counter_name = "Monthly-Session-Time"
  check_name = "Max-Monthly-Session"
  reply_name = "Session-Timeout"
  }
  # Loading module "noresetcounter" from file
/etc/freeradius/3.0/mods-enabled/sqlcounter
  sqlcounter noresetcounter {
  sql_module_instance = "sql"
  key = "User-Name"
  query = "SELECT IFNULL(SUM(AcctSessionTime),0) FROM radacct WHERE
UserName='%{User-Name}'"
  reset = "never"
  counter_name = "Max-All-Session-Time"
  check_name = "Max-All-Session"
  reply_name = "Session-Timeout"
  }
  # Loading module "expire_on_login" from file
/etc/freeradius/3.0/mods-enabled/sqlcounter
  sqlcounter expire_on_login {
  sql_module_instance = "sql"
  key = "User-Name"
  query = "SELECT IFNULL( MAX(TIME_TO_SEC(TIMEDIFF(NOW(),
acctstarttime))),0) FROM radacct WHERE UserName='%{User-Name}' ORDER BY
acctstarttime LIMIT 1;"
  reset = "never"
  counter_name = "Expire-After-Initial-Login"
  check_name = "Expire-After"
  reply_name = "Session-Timeout"
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
  files {
  filename = "/etc/freeradius/3.0/mods-config/files/authorize"
  acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
  preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
  soh {
  dhcp = yes
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file
/etc/freeradius/3.0/mods-enabled/radutmp
  radutmp {
  filename = "/var/log/freeradius/radutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 384
  caller_id = yes
  }
  # Loaded module rlm_detail
  # Loading module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail auth_log {
  filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail reply_log {
  filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail pre_proxy_log {
  filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail post_proxy_log {
  filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loaded module rlm_always
  # Loading module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
  always reject {
  rcode = "reject"
  simulcount = 0
  mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  always fail {
  rcode = "fail"
  simulcount = 0
  mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  always ok {
  rcode = "ok"
  simulcount = 0
  mpp = no
  }
  # Loading module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
  always handled {
  rcode = "handled"
  simulcount = 0
  mpp = no
  }
  # Loading module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
  always invalid {
  rcode = "invalid"
  simulcount = 0
  mpp = no
  }
  # Loading module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
  always userlock {
  rcode = "userlock"
  simulcount = 0
  mpp = no
  }
  # Loading module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
  always notfound {
  rcode = "notfound"
  simulcount = 0
  mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  always noop {
  rcode = "noop"
  simulcount = 0
  mpp = no
  }
  # Loading module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
  always updated {
  rcode = "updated"
  simulcount = 0
  mpp = no
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  realm IPASS {
  format = "prefix"
  delimiter = "/"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  realm suffix {
  format = "suffix"
  delimiter = "@"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
  realm realmpercent {
  format = "suffix"
  delimiter = "%"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
  realm ntdomain {
  format = "prefix"
  delimiter = "\\"
  ignore_default = no
  ignore_null = no
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
  expr {
  safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
  eap {
  default_eap_type = "md5"
  timer_expire = 60
  ignore_unknown_eap_types = no
  cisco_accounting_username_bug = no
  max_sessions = 16384
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file
/etc/freeradius/3.0/mods-enabled/replicate
  # Loaded module rlm_linelog
  # Loading module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
  linelog {
  filename = "/var/log/freeradius/linelog"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = "This is a log message for %{User-Name}"
  reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
  linelog log_accounting {
  filename = "/var/log/freeradius/linelog-accounting"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = ""
  reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
  preprocess {
  huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
  hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
  with_ascend_hack = no
  ascend_channels_per_line = 23
  with_ntdomain_hack = no
  with_specialix_jetstream_hack = no
  with_cisco_vsa_hack = no
  with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file
/etc/freeradius/3.0/mods-enabled/digest
  # Loaded module rlm_mschap
  # Loading module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
  mschap {
  use_mppe = yes
  require_encryption = no
  require_strong = no
  with_ntdomain_hack = yes
   passchange {
   }
  allow_retry = yes
  }
  # Loading module "ntlm_auth" from file
/etc/freeradius/3.0/mods-enabled/ntlm_auth
  exec ntlm_auth {
  wait = yes
  program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
  shell_escape = yes
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file
/etc/freeradius/3.0/mods-enabled/cache_eap
  cache cache_eap {
  driver = "rlm_cache_rbtree"
  key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  ttl = 15
  max_entries = 0
  epoch = 0
  add_stats = no
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  pap {
  normalise = yes
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
  # Loaded module rlm_unpack
  # Loading module "unpack" from file
/etc/freeradius/3.0/mods-enabled/unpack
  # Loading module "sradutmp" from file
/etc/freeradius/3.0/mods-enabled/sradutmp
  radutmp sradutmp {
  filename = "/var/log/freeradius/sradutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 420
  caller_id = no
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
  # Loading module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
  detail {
  filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
  # Loaded module rlm_sql
  # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql
  sql {
  driver = "rlm_sql_mysql"
  server = "localhost"
  port = 0
  login = "radius"
  password = <<< secret >>>
  radius_db = "radius"
  read_groups = yes
  read_profiles = yes
  read_clients = yes
  delete_stale_sessions = yes
  sql_user_name = "%{User-Name}"
  default_user_profile = ""
  client_query = "SELECT id, nasname, shortname, type, secret, server FROM
nas"
  authorize_check_query = "SELECT id, username, attribute, value, op FROM
radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
  authorize_reply_query = "SELECT id, username, attribute, value, op FROM
radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
  authorize_group_check_query = "SELECT id, groupname, attribute, Value, op
FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
  authorize_group_reply_query = "SELECT id, groupname, attribute, value, op
FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
  group_membership_query = "SELECT groupname FROM radusergroup WHERE
username = '%{SQL-User-Name}' ORDER BY priority"
  simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username =
'%{SQL-User-Name}' AND acctstoptime IS NULL"
  simul_verify_query = "SELECT radacctid, acctsessionid, username,
nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol
FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
  safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
   accounting {
    reference = "%{tolower:type.%{Acct-Status-Type}.query}"
    type {
     accounting-on {
      query = "UPDATE radacct SET acctstoptime =
FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
'%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime),
acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND
acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
     }
     accounting-off {
      query = "UPDATE radacct SET acctstoptime =
FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
'%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime),
acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND
acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
     }
     start {
      query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username,
realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime,
acctstoptime, acctsessiontime, acctauthentic, connectinfo_start,
connectinfo_stop,
acctinputoctets, acctoutputoctets, calledstationid, callingstationid,
acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES
('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
'%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}',
'%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}),
FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}',
'%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}')"
     }
     interim-update {
      query = "UPDATE radacct SET acctupdatetime  =
(@acctupdatetime_old:=acctupdatetime), acctupdatetime  =
FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval    =
%{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old),
framedipaddress = '%{Framed-IP-Address}', acctsessiontime =
%{%{Acct-Session-Time}:-NULL}, acctinputoctets =
'%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId =
'%{Acct-Unique-Session-Id}'"
     }
     stop {
      query = "UPDATE radacct SET acctstoptime =
FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
%{%{Acct-Session-Time}:-NULL}, acctinputoctets =
'%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}', acctterminatecause =
'%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
AcctUniqueId = '%{Acct-Unique-Session-Id}'"
     }
    }
   }
   post-auth {
    reference = ".query"
    query = "INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S')"
   }
  }
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
Creating attribute SQL-Group
  # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
  exec {
  wait = no
  input_pairs = "request"
  shell_escape = yes
  timeout = 10
  }
  instantiate {
  # Instantiating module "dailycounter" from file
/etc/freeradius/3.0/mods-enabled/sqlcounter
rlm_sqlcounter: Current Time: 1550488138 [2019-02-18 12:08:58], Next reset
1550530800 [2019-02-19 00:00:00]
rlm_sqlcounter: Current Time: 1550488138 [2019-02-18 12:08:58], Prev reset
1550444400 [2019-02-18 00:00:00]
  }
  # Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_reject
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/accounting_response
  # Instantiating module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
  # Instantiating module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "monthlycounter" from file
/etc/freeradius/3.0/mods-enabled/sqlcounter
rlm_sqlcounter: Current Time: 1550488138 [2019-02-18 12:08:58], Next reset
1551394800 [2019-03-01 00:00:00]
rlm_sqlcounter: Current Time: 1550488138 [2019-02-18 12:08:58], Prev reset
1548975600 [2019-02-01 00:00:00]
  # Instantiating module "noresetcounter" from file
/etc/freeradius/3.0/mods-enabled/sqlcounter
rlm_sqlcounter: Current Time: 1550488138 [2019-02-18 12:08:58], Next reset
0 [2019-02-18 12:00:00]
rlm_sqlcounter: Current Time: 1550488138 [2019-02-18 12:08:58], Prev reset
0 [2019-02-18 12:00:00]
  # Instantiating module "expire_on_login" from file
/etc/freeradius/3.0/mods-enabled/sqlcounter
rlm_sqlcounter: Current Time: 1550488138 [2019-02-18 12:08:58], Next reset
0 [2019-02-18 12:00:00]
rlm_sqlcounter: Current Time: 1550488138 [2019-02-18 12:08:58], Prev reset
0 [2019-02-18 12:00:00]
  # Instantiating module "files" from file
/etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
  # Instantiating module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "fail" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "ok" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "noop" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "IPASS" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "suffix" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "eap" from file
/etc/freeradius/3.0/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
    challenge = "Password: "
    auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
    tls = "tls-common"
   }
   tls-config tls-common {
    verify_depth = 0
    ca_path = "/etc/freeradius/3.0/certs"
    pem_file_type = yes
    private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
    certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
    ca_file = "/etc/ssl/certs/ca-certificates.crt"
    private_key_password = <<< secret >>>
    dh_file = "/etc/freeradius/3.0/certs/dh"
    fragment_size = 1024
    include_length = yes
    auto_chain = yes
    check_crl = no
    check_all_crl = no
    cipher_list = "DEFAULT"
    ecdh_curve = "prime256v1"
    cache {
    enable = yes
    lifetime = 24
    max_entries = 255
    }
    verify {
    skip_if_ocsp_ok = no
    }
    ocsp {
    enable = no
    override_cert_url = yes
    url = "http://127.0.0.1/ocsp/"
    use_nonce = yes
    timeout = 0
    softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
    tls = "tls-common"
    default_eap_type = "md5"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    virtual_server = "inner-tunnel"
    include_length = yes
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
    tls = "tls-common"
    default_eap_type = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
    soh = no
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
    with_ntdomain_hack = no
    send_error = no
   }
  # Instantiating module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
  # Instantiating module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "cache_eap" from file
/etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
loaded and linked
  # Instantiating module "pap" from file
/etc/freeradius/3.0/mods-enabled/pap
  # Instantiating module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
  # Instantiating module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
  # Instantiating module "sql" from file
/etc/freeradius/3.0/mods-enabled/sql
rlm_sql_mysql: libmysql version: 10.1.37-MariaDB
   mysql {
    tls {
    }
    warnings = "auto"
   }
rlm_sql (sql): Attempting to connect to database "radius"
rlm_sql (sql): Initialising connection pool
   pool {
    start = 5
    min = 3
    max = 32
    spare = 10
    uses = 0
    lifetime = 0
    cleanup_interval = 30
    idle_timeout = 60
    retry_delay = 30
    spread = no
   }
rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket,
server version 10.1.23-MariaDB-9+deb9u1, protocol version 10
rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket,
server version 10.1.23-MariaDB-9+deb9u1, protocol version 10
rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket,
server version 10.1.23-MariaDB-9+deb9u1, protocol version 10
rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket,
server version 10.1.23-MariaDB-9+deb9u1, protocol version 10
rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket,
server version 10.1.23-MariaDB-9+deb9u1, protocol version 10
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname,
shortname, type, secret, server FROM nas
rlm_sql (sql): Reserved connection (0)
rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type,
secret, server FROM nas
rlm_sql (sql): Adding client 192.168.1.1 (my-AP-1) to global clients list
rlm_sql (192.168.1.1): Client "my-AP-1" (sql) added
rlm_sql (sql): Adding client 192.168.1.2 (my-AP-2) to global clients list
rlm_sql (192.168.1.2): Client "my-AP-2" (sql) added
rlm_sql (sql): Released connection (0)
rlm_sql (sql): Need 5 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket,
server version 10.1.23-MariaDB-9+deb9u1, protocol version 10
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server coa { # from file /etc/freeradius/3.0/sites-enabled/coa
 # Loading recv-coa {...}
 # Loading send-coa {...}
} # server coa
server inner-tunnel { # from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server inner-tunnel
server default { # from file /etc/freeradius/3.0/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
  type = "coa"
  virtual_server = "coa"
  ipaddr = 192.168.1.23
  port = 3799
}
listen {
  type = "auth"
  ipaddr = 127.0.0.1
  port = 18120
}
listen {
  type = "auth"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
Listening on coa address 192.168.1.23 port 3799 bound to server coa
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 45765
Listening on proxy address :: port 60911
Ready to process requests
(0) Received Access-Request Id 213 from 192.168.1.1:37800 to
192.168.1.23:1812 length 218
(0)   User-Name = "vlado"
(0)   NAS-Identifier = "XXXXXXXXXXXX"
(0)   Called-Station-Id = "XX-XX-XX-XX-XX-XX:5GWlan"
(0)   NAS-Port-Type = Wireless-802.11
(0)   Service-Type = Framed-User
(0)   NAS-Port = 1
(0)   Calling-Station-Id = "YY-YY-YY-YY-YY-YY"
(0)   Connect-Info = "CONNECT 54Mbps 802.11a"
(0)   Acct-Session-Id = "AF67C8444C73C070"
(0)   Acct-Multi-Session-Id = "9D9725C5137C2DEA"
(0)   WLAN-Pairwise-Cipher = 1027076
(0)   WLAN-Group-Cipher = 1027076
(0)   WLAN-AKM-Suite = 1027073
(0)   Framed-MTU = 1400
(0)   EAP-Message = 0x02e8000a01766c61646f
(0)   Message-Authenticator = 0x2e82a80e87c474ff358305ccf90d4269
(0) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(0)   authorize {
(0)     policy rewrite_calling_station_id {
(0)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(0)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
-> TRUE
(0)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(0)         update request {
(0)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(0)              --> YY-YY-YY-YY-YY-YY
(0)           &Calling-Station-Id := YY-YY-YY-YY-YY-YY
(0)         } # update request = noop
(0)         [updated] = updated
(0)       } # if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
= updated
(0)       ... skipping else: Preceding "if" was taken
(0)     } # policy rewrite_calling_station_id = updated
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = updated
(0)     } # policy filter_username = updated
(0)     [preprocess] = ok
(0) auth_log: EXPAND
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(0) auth_log:    --> /var/log/freeradius/radacct/
192.168.1.1/auth-detail-20190218
(0) auth_log:
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to /var/log/freeradius/radacct/192.168.1.1/auth-detail-20190218
(0) auth_log: EXPAND %t
(0) auth_log:    --> Mon Feb 18 12:10:05 2019
(0)     [auth_log] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "vlado", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 232 length 10
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 233 length 22
(0) eap: EAP session adding &reply:State = 0x72f87ed472117a13
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) Post-Auth-Type sub-section not found.  Ignoring.
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) Sent Access-Challenge Id 213 from 192.168.1.23:1812 to 192.168.1.1:37800
length 0
(0)   EAP-Message = 0x01e9001604103568f042ea3ee1fb5c2c64384f4cf9f3
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0x72f87ed472117a139eb6154612f031f0
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 214 from 192.168.1.1:37800 to
192.168.1.23:1812 length 232
(1)   User-Name = "vlado"
(1)   NAS-Identifier = "XXXXXXXXXXXX"
(1)   Called-Station-Id = "XX-XX-XX-XX-XX-XX:5GWlan"
(1)   NAS-Port-Type = Wireless-802.11
(1)   Service-Type = Framed-User
(1)   NAS-Port = 1
(1)   Calling-Station-Id = "YY-YY-YY-YY-YY-YY"
(1)   Connect-Info = "CONNECT 54Mbps 802.11a"
(1)   Acct-Session-Id = "AF67C8444C73C070"
(1)   Acct-Multi-Session-Id = "9D9725C5137C2DEA"
(1)   WLAN-Pairwise-Cipher = 1027076
(1)   WLAN-Group-Cipher = 1027076
(1)   WLAN-AKM-Suite = 1027073
(1)   Framed-MTU = 1400
(1)   EAP-Message = 0x02e900060319
(1)   State = 0x72f87ed472117a139eb6154612f031f0
(1)   Message-Authenticator = 0xf2ddb60c0cda5cf7a5a46e2d28797d3b
(1) session-state: No cached attributes
(1) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(1)   authorize {
(1)     policy rewrite_calling_station_id {
(1)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(1)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
-> TRUE
(1)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(1)         update request {
(1)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(1)              --> YY-YY-YY-YY-YY-YY
(1)           &Calling-Station-Id := YY-YY-YY-YY-YY-YY
(1)         } # update request = noop
(1)         [updated] = updated
(1)       } # if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
= updated
(1)       ... skipping else: Preceding "if" was taken
(1)     } # policy rewrite_calling_station_id = updated
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = updated
(1)     } # policy filter_username = updated
(1)     [preprocess] = ok
(1) auth_log: EXPAND
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(1) auth_log:    --> /var/log/freeradius/radacct/
192.168.1.1/auth-detail-20190218
(1) auth_log:
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to /var/log/freeradius/radacct/192.168.1.1/auth-detail-20190218
(1) auth_log: EXPAND %t
(1) auth_log:    --> Mon Feb 18 12:10:05 2019
(1)     [auth_log] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "vlado", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 233 length 6
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1)     [eap] = updated
(1)     [files] = noop
(1) sql: EXPAND %{User-Name}
(1) sql:    --> vlado
(1) sql: SQL-User-Name set to 'vlado'
rlm_sql (sql): Closing connection (1): Hit idle_timeout, was idle for 67
seconds
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing connection (2): Hit idle_timeout, was idle for 67
seconds
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing connection (3): Hit idle_timeout, was idle for 67
seconds
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing connection (4): Hit idle_timeout, was idle for 67
seconds
rlm_sql (sql): You probably need to lower "min"
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing connection (0): Hit idle_timeout, was idle for 67
seconds
rlm_sql (sql): You probably need to lower "min"
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing connection (5): Hit idle_timeout, was idle for 67
seconds
rlm_sql (sql): You probably need to lower "min"
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): 0 of 0 connections in use.  You  may need to increase "spare"
rlm_sql (sql): Opening additional connection (6), 1 of 32 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket,
server version 10.1.23-MariaDB-9+deb9u1, protocol version 10
rlm_sql (sql): Reserved connection (6)
(1) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
WHERE username = '%{SQL-User-Name}' ORDER BY id
(1) sql:    --> SELECT id, username, attribute, value, op FROM radcheck
WHERE username = 'vlado' ORDER BY id
(1) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radcheck WHERE username = 'vlado' ORDER BY id
(1) sql: User found in radcheck table
(1) sql: Conditional check items matched, merging assignment check items
(1) sql:   Cleartext-Password := "hello"
(1) sql:   Login-Time := "Al0001-2359"
(1) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply
WHERE username = '%{SQL-User-Name}' ORDER BY id
(1) sql:    --> SELECT id, username, attribute, value, op FROM radreply
WHERE username = 'vlado' ORDER BY id
(1) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radreply WHERE username = 'vlado' ORDER BY id
(1) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
'%{SQL-User-Name}' ORDER BY priority
(1) sql:    --> SELECT groupname FROM radusergroup WHERE username = 'vlado'
ORDER BY priority
(1) sql: Executing select query: SELECT groupname FROM radusergroup WHERE
username = 'vlado' ORDER BY priority
(1) sql: User not found in any groups
rlm_sql (sql): Released connection (6)
rlm_sql (sql): Need 2 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (7), 1 of 31 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket,
server version 10.1.23-MariaDB-9+deb9u1, protocol version 10
(1)     [sql] = ok
(1)     [expiration] = noop
(1) logintime: Checking Login-Time
(1) logintime: Login within allowed time-slot, 42600 seconds left in this
session
(1) logintime: reply:Session-Timeout set to 42600
(1)     [logintime] = updated
(1) dailycounter: WARNING: Couldn't find check attribute,
control:Max-Daily-Session, doing nothing...
(1)     [dailycounter] = noop
(1) noresetcounter: WARNING: Couldn't find check attribute,
control:Max-All-Session, doing nothing...
(1)     [noresetcounter] = noop
(1) monthlycounter: WARNING: Couldn't find check attribute,
control:Max-Monthly-Session, doing nothing...
(1)     [monthlycounter] = noop
(1) expire_on_login: WARNING: Couldn't find check attribute,
control:Expire-After, doing nothing...
(1)     [expire_on_login] = noop
(1) pap: WARNING: Auth-Type already set.  Not setting to PAP
(1)     [pap] = noop
(1)   } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0x72f87ed472117a13
(1) eap: Finished EAP session with state 0x72f87ed472117a13
(1) eap: Previous EAP request found for state 0x72f87ed472117a13, released
from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Initiating new EAP-TLS session
(1) eap_peap: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 234 length 6
(1) eap: EAP session adding &reply:State = 0x72f87ed473126713
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) Post-Auth-Type sub-section not found.  Ignoring.
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) Sent Access-Challenge Id 214 from 192.168.1.23:1812 to 192.168.1.1:37800
length 0
(1)   Session-Timeout = 42600
(1)   EAP-Message = 0x01ea00061920
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0x72f87ed4731267139eb6154612f031f0
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 215 from 192.168.1.1:37800 to
192.168.1.23:1812 length 401
(2)   User-Name = "vlado"
(2)   NAS-Identifier = "XXXXXXXXXXXX"
(2)   Called-Station-Id = "XX-XX-XX-XX-XX-XX:5GWlan"
(2)   NAS-Port-Type = Wireless-802.11
(2)   Service-Type = Framed-User
(2)   NAS-Port = 1
(2)   Calling-Station-Id = "YY-YY-YY-YY-YY-YY"
(2)   Connect-Info = "CONNECT 54Mbps 802.11a"
(2)   Acct-Session-Id = "AF67C8444C73C070"
(2)   Acct-Multi-Session-Id = "9D9725C5137C2DEA"
(2)   WLAN-Pairwise-Cipher = 1027076
(2)   WLAN-Group-Cipher = 1027076
(2)   WLAN-AKM-Suite = 1027073
(2)   Framed-MTU = 1400
(2)   EAP-Message =
0x02ea00af1980000000a516030100a00100009c0303eaa3b599563fcd1ba078d86740a309e828e36d76930515184f300dfce8d92fcb00003ec02cc030009fc02bc02f009ecca9cca8c00ac024c014c0280039006bc009c023c013c02700330067c007c011009d009c0035003d002f003c00050004000a01
(2)   State = 0x72f87ed4731267139eb6154612f031f0
(2)   Message-Authenticator = 0x119fc3945c0c063c3b00fdae1774d78a
(2) session-state: No cached attributes
(2) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(2)   authorize {
(2)     policy rewrite_calling_station_id {
(2)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(2)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
-> TRUE
(2)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(2)         update request {
(2)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(2)              --> YY-YY-YY-YY-YY-YY
(2)           &Calling-Station-Id := YY-YY-YY-YY-YY-YY
(2)         } # update request = noop
(2)         [updated] = updated
(2)       } # if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
= updated
(2)       ... skipping else: Preceding "if" was taken
(2)     } # policy rewrite_calling_station_id = updated
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = updated
(2)     } # policy filter_username = updated
(2)     [preprocess] = ok
(2) auth_log: EXPAND
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(2) auth_log:    --> /var/log/freeradius/radacct/
192.168.1.1/auth-detail-20190218
(2) auth_log:
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to /var/log/freeradius/radacct/192.168.1.1/auth-detail-20190218
(2) auth_log: EXPAND %t
(2) auth_log:    --> Mon Feb 18 12:10:05 2019
(2)     [auth_log] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "vlado", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 234 length 175
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0x72f87ed473126713
(2) eap: Finished EAP session with state 0x72f87ed473126713
(2) eap: Previous EAP request found for state 0x72f87ed473126713, released
from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: Peer indicated complete TLS record size will be 165 bytes
(2) eap_peap: Got complete TLS record (165 bytes)
(2) eap_peap: [eaptls verify] = length included
(2) eap_peap: (other): before SSL initialization
(2) eap_peap: TLS_accept: before SSL initialization
(2) eap_peap: TLS_accept: before SSL initialization
(2) eap_peap: <<< recv TLS 1.2  [length 00a0]
(2) eap_peap: TLS_accept: SSLv3/TLS read client hello
(2) eap_peap: >>> send TLS 1.2  [length 003d]
(2) eap_peap: TLS_accept: SSLv3/TLS write server hello
(2) eap_peap: >>> send TLS 1.2  [length 02d9]
(2) eap_peap: TLS_accept: SSLv3/TLS write certificate
(2) eap_peap: >>> send TLS 1.2  [length 014d]
(2) eap_peap: TLS_accept: SSLv3/TLS write key exchange
(2) eap_peap: >>> send TLS 1.2  [length 0004]
(2) eap_peap: TLS_accept: SSLv3/TLS write server done
(2) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server
done
(2) eap_peap: In SSL Handshake Phase
(2) eap_peap: In SSL Accept mode
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 235 length 1004
(2) eap: EAP session adding &reply:State = 0x72f87ed470136713
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) Post-Auth-Type sub-section not found.  Ignoring.
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) Sent Access-Challenge Id 215 from 192.168.1.23:1812 to 192.168.1.1:37800
length 0
(2)   EAP-Message =
0x01eb03ec19c00000047b160303003d0200003903038a4f2b5bcf454e0f1ca23649b4b63a6867795d2cd2b550117338a7d2ed231fd400c030000011ff01000100000b0004030001020017000016030302d90b0002d50002d20002cf308202cb308201b3a003020102020900d563010a5c094c7a300d0609
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0x72f87ed4701367139eb6154612f031f0
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 216 from 192.168.1.1:37800 to
192.168.1.23:1812 length 232
(3)   User-Name = "vlado"
(3)   NAS-Identifier = "XXXXXXXXXXXX"
(3)   Called-Station-Id = "XX-XX-XX-XX-XX-XX:5GWlan"
(3)   NAS-Port-Type = Wireless-802.11
(3)   Service-Type = Framed-User
(3)   NAS-Port = 1
(3)   Calling-Station-Id = "YY-YY-YY-YY-YY-YY"
(3)   Connect-Info = "CONNECT 54Mbps 802.11a"
(3)   Acct-Session-Id = "AF67C8444C73C070"
(3)   Acct-Multi-Session-Id = "9D9725C5137C2DEA"
(3)   WLAN-Pairwise-Cipher = 1027076
(3)   WLAN-Group-Cipher = 1027076
(3)   WLAN-AKM-Suite = 1027073
(3)   Framed-MTU = 1400
(3)   EAP-Message = 0x02eb00061900
(3)   State = 0x72f87ed4701367139eb6154612f031f0
(3)   Message-Authenticator = 0xe988e5e3b0eecd7634d90c8ce3cc53f0
(3) session-state: No cached attributes
(3) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(3)   authorize {
(3)     policy rewrite_calling_station_id {
(3)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(3)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
-> TRUE
(3)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(3)         update request {
(3)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(3)              --> YY-YY-YY-YY-YY-YY
(3)           &Calling-Station-Id := YY-YY-YY-YY-YY-YY
(3)         } # update request = noop
(3)         [updated] = updated
(3)       } # if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
= updated
(3)       ... skipping else: Preceding "if" was taken
(3)     } # policy rewrite_calling_station_id = updated
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = updated
(3)     } # policy filter_username = updated
(3)     [preprocess] = ok
(3) auth_log: EXPAND
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(3) auth_log:    --> /var/log/freeradius/radacct/
192.168.1.1/auth-detail-20190218
(3) auth_log:
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to /var/log/freeradius/radacct/192.168.1.1/auth-detail-20190218
(3) auth_log: EXPAND %t
(3) auth_log:    --> Mon Feb 18 12:10:05 2019
(3)     [auth_log] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "vlado", looking up realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 235 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0x72f87ed470136713
(3) eap: Finished EAP session with state 0x72f87ed470136713
(3) eap: Previous EAP request found for state 0x72f87ed470136713, released
from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer ACKed our handshake fragment
(3) eap_peap: [eaptls verify] = request
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 236 length 159
(3) eap: EAP session adding &reply:State = 0x72f87ed471146713
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) Post-Auth-Type sub-section not found.  Ignoring.
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3) Sent Access-Challenge Id 216 from 192.168.1.23:1812 to 192.168.1.1:37800
length 0
(3)   EAP-Message =
0x01ec009f1900115390b7e7dd47f66d3ae488019fc8804d0399d9e67a12b95d8f0bd2d25e776416884eacacc12637275a5efd123651cd92cce732752b76e1f2752d72a7e2598d1e626bef5e8eb96d8003db7653c3d57aab18ece54cdf092ed03f0822fa5bcb0e13516423f6d4e27766d97d5a05711d4ca4
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0x72f87ed4711467139eb6154612f031f0
(3) Finished request
Waking up in 4.8 seconds.
(4) Received Access-Request Id 217 from 192.168.1.1:37800 to
192.168.1.23:1812 length 362
(4)   User-Name = "vlado"
(4)   NAS-Identifier = "XXXXXXXXXXXX"
(4)   Called-Station-Id = "XX-XX-XX-XX-XX-XX:5GWlan"
(4)   NAS-Port-Type = Wireless-802.11
(4)   Service-Type = Framed-User
(4)   NAS-Port = 1
(4)   Calling-Station-Id = "YY-YY-YY-YY-YY-YY"
(4)   Connect-Info = "CONNECT 54Mbps 802.11a"
(4)   Acct-Session-Id = "AF67C8444C73C070"
(4)   Acct-Multi-Session-Id = "9D9725C5137C2DEA"
(4)   WLAN-Pairwise-Cipher = 1027076
(4)   WLAN-Group-Cipher = 1027076
(4)   WLAN-AKM-Suite = 1027073
(4)   Framed-MTU = 1400
(4)   EAP-Message =
0x02ec008819800000007e160303004610000042410489751519213749814a2f16a22ddf7c3871bef4c8a04849de481447fdb0f27e984de8f161d520398b6ac123778797919a08b1265e29ce50a9489c17896b08e2041403030001011603030028000000000000000025b4e5927cab6acbd7df7d0ddbeec2
(4)   State = 0x72f87ed4711467139eb6154612f031f0
(4)   Message-Authenticator = 0x214c0b000ffde962cde065d3d29cedcf
(4) session-state: No cached attributes
(4) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(4)   authorize {
(4)     policy rewrite_calling_station_id {
(4)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(4)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
-> TRUE
(4)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(4)         update request {
(4)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(4)              --> YY-YY-YY-YY-YY-YY
(4)           &Calling-Station-Id := YY-YY-YY-YY-YY-YY
(4)         } # update request = noop
(4)         [updated] = updated
(4)       } # if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
= updated
(4)       ... skipping else: Preceding "if" was taken
(4)     } # policy rewrite_calling_station_id = updated
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = updated
(4)     } # policy filter_username = updated
(4)     [preprocess] = ok
(4) auth_log: EXPAND
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(4) auth_log:    --> /var/log/freeradius/radacct/
192.168.1.1/auth-detail-20190218
(4) auth_log:
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to /var/log/freeradius/radacct/192.168.1.1/auth-detail-20190218
(4) auth_log: EXPAND %t
(4) auth_log:    --> Mon Feb 18 12:10:05 2019
(4)     [auth_log] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "vlado", looking up realm NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 236 length 136
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0x72f87ed471146713
(4) eap: Finished EAP session with state 0x72f87ed471146713
(4) eap: Previous EAP request found for state 0x72f87ed471146713, released
from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer indicated complete TLS record size will be 126 bytes
(4) eap_peap: Got complete TLS record (126 bytes)
(4) eap_peap: [eaptls verify] = length included
(4) eap_peap: TLS_accept: SSLv3/TLS write server done
(4) eap_peap: <<< recv TLS 1.2  [length 0046]
(4) eap_peap: TLS_accept: SSLv3/TLS read client key exchange
(4) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec
(4) eap_peap: <<< recv TLS 1.2  [length 0010]
(4) eap_peap: TLS_accept: SSLv3/TLS read finished
(4) eap_peap: >>> send TLS 1.2  [length 0001]
(4) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec
(4) eap_peap: >>> send TLS 1.2  [length 0010]
(4) eap_peap: TLS_accept: SSLv3/TLS write finished
(4) eap_peap: (other): SSL negotiation finished successfully
(4) eap_peap: SSL Connection Established
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 237 length 57
(4) eap: EAP session adding &reply:State = 0x72f87ed476156713
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) Post-Auth-Type sub-section not found.  Ignoring.
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4) Sent Access-Challenge Id 217 from 192.168.1.23:1812 to 192.168.1.1:37800
length 0
(4)   EAP-Message =
0x01ed003919001403030001011603030028eb7c72f8ba2aae832999f4aad001fe694c41561ea194a9204a4cbb6845c0430bf618ff325a567172
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0x72f87ed4761567139eb6154612f031f0
(4) Finished request
Waking up in 4.8 seconds.
(5) Received Access-Request Id 218 from 192.168.1.1:37800 to
192.168.1.23:1812 length 232
(5)   User-Name = "vlado"
(5)   NAS-Identifier = "XXXXXXXXXXXX"
(5)   Called-Station-Id = "XX-XX-XX-XX-XX-XX:5GWlan"
(5)   NAS-Port-Type = Wireless-802.11
(5)   Service-Type = Framed-User
(5)   NAS-Port = 1
(5)   Calling-Station-Id = "YY-YY-YY-YY-YY-YY"
(5)   Connect-Info = "CONNECT 54Mbps 802.11a"
(5)   Acct-Session-Id = "AF67C8444C73C070"
(5)   Acct-Multi-Session-Id = "9D9725C5137C2DEA"
(5)   WLAN-Pairwise-Cipher = 1027076
(5)   WLAN-Group-Cipher = 1027076
(5)   WLAN-AKM-Suite = 1027073
(5)   Framed-MTU = 1400
(5)   EAP-Message = 0x02ed00061900
(5)   State = 0x72f87ed4761567139eb6154612f031f0
(5)   Message-Authenticator = 0xa5c1466d0dfd1aec8355ddf82ff8f2fc
(5) session-state: No cached attributes
(5) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(5)   authorize {
(5)     policy rewrite_calling_station_id {
(5)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(5)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
-> TRUE
(5)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(5)         update request {
(5)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(5)              --> YY-YY-YY-YY-YY-YY
(5)           &Calling-Station-Id := YY-YY-YY-YY-YY-YY
(5)         } # update request = noop
(5)         [updated] = updated
(5)       } # if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
= updated
(5)       ... skipping else: Preceding "if" was taken
(5)     } # policy rewrite_calling_station_id = updated
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = updated
(5)     } # policy filter_username = updated
(5)     [preprocess] = ok
(5) auth_log: EXPAND
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(5) auth_log:    --> /var/log/freeradius/radacct/
192.168.1.1/auth-detail-20190218
(5) auth_log:
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to /var/log/freeradius/radacct/192.168.1.1/auth-detail-20190218
(5) auth_log: EXPAND %t
(5) auth_log:    --> Mon Feb 18 12:10:06 2019
(5)     [auth_log] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "vlado", looking up realm NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 237 length 6
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0x72f87ed476156713
(5) eap: Finished EAP session with state 0x72f87ed476156713
(5) eap: Previous EAP request found for state 0x72f87ed476156713, released
from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: Peer ACKed our handshake fragment.  handshake is finished
(5) eap_peap: [eaptls verify] = success
(5) eap_peap: [eaptls process] = success
(5) eap_peap: Session established.  Decoding tunneled attributes
(5) eap_peap: PEAP state TUNNEL ESTABLISHED
(5) eap: Sending EAP Request (code 1) ID 238 length 40
(5) eap: EAP session adding &reply:State = 0x72f87ed477166713
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) Post-Auth-Type sub-section not found.  Ignoring.
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5) Sent Access-Challenge Id 218 from 192.168.1.23:1812 to 192.168.1.1:37800
length 0
(5)   EAP-Message =
0x01ee00281900170303001deb7c72f8ba2aae84b6857b3fe93ac82aebfddad9f4d723a24c8c8a6e5b
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0x72f87ed4771667139eb6154612f031f0
(5) Finished request
Waking up in 4.8 seconds.
(6) Received Access-Request Id 219 from 192.168.1.1:37800 to
192.168.1.23:1812 length 267
(6)   User-Name = "vlado"
(6)   NAS-Identifier = "XXXXXXXXXXXX"
(6)   Called-Station-Id = "XX-XX-XX-XX-XX-XX:5GWlan"
(6)   NAS-Port-Type = Wireless-802.11
(6)   Service-Type = Framed-User
(6)   NAS-Port = 1
(6)   Calling-Station-Id = "YY-YY-YY-YY-YY-YY"
(6)   Connect-Info = "CONNECT 54Mbps 802.11a"
(6)   Acct-Session-Id = "AF67C8444C73C070"
(6)   Acct-Multi-Session-Id = "9D9725C5137C2DEA"
(6)   WLAN-Pairwise-Cipher = 1027076
(6)   WLAN-Group-Cipher = 1027076
(6)   WLAN-AKM-Suite = 1027073
(6)   Framed-MTU = 1400
(6)   EAP-Message =
0x02ee00291900170303001e0000000000000001021f0a8a3e9d82a7a9a7cc04a61e347203063c9c8532
(6)   State = 0x72f87ed4771667139eb6154612f031f0
(6)   Message-Authenticator = 0x3c723707d01681afd13962685f819bbf
(6) session-state: No cached attributes
(6) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(6)   authorize {
(6)     policy rewrite_calling_station_id {
(6)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(6)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
-> TRUE
(6)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(6)         update request {
(6)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(6)              --> YY-YY-YY-YY-YY-YY
(6)           &Calling-Station-Id := YY-YY-YY-YY-YY-YY
(6)         } # update request = noop
(6)         [updated] = updated
(6)       } # if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
= updated
(6)       ... skipping else: Preceding "if" was taken
(6)     } # policy rewrite_calling_station_id = updated
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = updated
(6)     } # policy filter_username = updated
(6)     [preprocess] = ok
(6) auth_log: EXPAND
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(6) auth_log:    --> /var/log/freeradius/radacct/
192.168.1.1/auth-detail-20190218
(6) auth_log:
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to /var/log/freeradius/radacct/192.168.1.1/auth-detail-20190218
(6) auth_log: EXPAND %t
(6) auth_log:    --> Mon Feb 18 12:10:06 2019
(6)     [auth_log] = ok
(6)     [chap] = noop
(6)     [mschap] = noop
(6)     [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "vlado", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)     [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 238 length 41
(6) eap: Continuing tunnel setup
(6)     [eap] = ok
(6)   } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6)   authenticate {
(6) eap: Expiring EAP session with state 0x72f87ed477166713
(6) eap: Finished EAP session with state 0x72f87ed477166713
(6) eap: Previous EAP request found for state 0x72f87ed477166713, released
from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: Continuing EAP-TLS
(6) eap_peap: [eaptls verify] = ok
(6) eap_peap: Done initial handshake
(6) eap_peap: [eaptls process] = ok
(6) eap_peap: Session established.  Decoding tunneled attributes
(6) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(6) eap_peap: Identity - vlado
(6) eap_peap: Got inner identity 'vlado'
(6) eap_peap: Setting default EAP type for tunneled EAP session
(6) eap_peap: Got tunneled request
(6) eap_peap:   EAP-Message = 0x02ee000a01766c61646f
(6) eap_peap: Setting User-Name to vlado
(6) eap_peap: Sending tunneled request to inner-tunnel
(6) eap_peap:   EAP-Message = 0x02ee000a01766c61646f
(6) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(6) eap_peap:   User-Name = "vlado"
(6) Virtual server inner-tunnel received request
(6)   EAP-Message = 0x02ee000a01766c61646f
(6)   FreeRADIUS-Proxied-To = 127.0.0.1
(6)   User-Name = "vlado"
(6) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(6) server inner-tunnel {
(6)   # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(6)     authorize {
(6)       policy filter_username {
(6)         if (&User-Name) {
(6)         if (&User-Name)  -> TRUE
(6)         if (&User-Name)  {
(6)           if (&User-Name =~ / /) {
(6)           if (&User-Name =~ / /)  -> FALSE
(6)           if (&User-Name =~ /@[^@]*@/ ) {
(6)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)           if (&User-Name =~ /\.\./ ) {
(6)           if (&User-Name =~ /\.\./ )  -> FALSE
(6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
 -> FALSE
(6)           if (&User-Name =~ /\.$/)  {
(6)           if (&User-Name =~ /\.$/)   -> FALSE
(6)           if (&User-Name =~ /@\./)  {
(6)           if (&User-Name =~ /@\./)   -> FALSE
(6)         } # if (&User-Name)  = notfound
(6)       } # policy filter_username = notfound
(6)       [chap] = noop
(6)       [mschap] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "vlado", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)       [suffix] = noop
(6)       update control {
(6)         &Proxy-To-Realm := LOCAL
(6)       } # update control = noop
(6) eap: Peer sent EAP Response (code 2) ID 238 length 10
(6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(6)       [eap] = ok
(6)     } # authorize = ok
(6)   Found Auth-Type = eap
(6)   # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(6)     authenticate {
(6) eap: Peer sent packet with method EAP Identity (1)
(6) eap: Calling submodule eap_mschapv2 to process data
(6) eap_mschapv2: Issuing Challenge
(6) eap: Sending EAP Request (code 1) ID 239 length 43
(6) eap: EAP session adding &reply:State = 0x3bd67c043b3966c8
(6)       [eap] = handled
(6)     } # authenticate = handled
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6)   EAP-Message =
0x01ef002b1a01ef0026104d904cab80ac28f62451ea36b597f8f3667265657261646975732d332e302e3132
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0x3bd67c043b3966c8d43c1189a979d5ee
(6) eap_peap: Got tunneled reply code 11
(6) eap_peap:   EAP-Message =
0x01ef002b1a01ef0026104d904cab80ac28f62451ea36b597f8f3667265657261646975732d332e302e3132
(6) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_peap:   State = 0x3bd67c043b3966c8d43c1189a979d5ee
(6) eap_peap: Got tunneled reply RADIUS code 11
(6) eap_peap:   EAP-Message =
0x01ef002b1a01ef0026104d904cab80ac28f62451ea36b597f8f3667265657261646975732d332e302e3132
(6) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_peap:   State = 0x3bd67c043b3966c8d43c1189a979d5ee
(6) eap_peap: Got tunneled Access-Challenge
(6) eap: Sending EAP Request (code 1) ID 239 length 74
(6) eap: EAP session adding &reply:State = 0x72f87ed474176713
(6)     [eap] = handled
(6)   } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) Post-Auth-Type sub-section not found.  Ignoring.
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6) Sent Access-Challenge Id 219 from 192.168.1.23:1812 to 192.168.1.1:37800
length 0
(6)   EAP-Message =
0x01ef004a1900170303003feb7c72f8ba2aae85077f98646809c57a9697c57afa697aa5cb19515426259aaf4705857b46b19f8c8c600d65c9bc37bec32c93463b24d826dc7b15bacbda80
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0x72f87ed4741767139eb6154612f031f0
(6) Finished request
Waking up in 4.8 seconds.
(7) Received Access-Request Id 220 from 192.168.1.1:37800 to
192.168.1.23:1812 length 321
(7)   User-Name = "vlado"
(7)   NAS-Identifier = "XXXXXXXXXXXX"
(7)   Called-Station-Id = "XX-XX-XX-XX-XX-XX:5GWlan"
(7)   NAS-Port-Type = Wireless-802.11
(7)   Service-Type = Framed-User
(7)   NAS-Port = 1
(7)   Calling-Station-Id = "YY-YY-YY-YY-YY-YY"
(7)   Connect-Info = "CONNECT 54Mbps 802.11a"
(7)   Acct-Session-Id = "AF67C8444C73C070"
(7)   Acct-Multi-Session-Id = "9D9725C5137C2DEA"
(7)   WLAN-Pairwise-Cipher = 1027076
(7)   WLAN-Group-Cipher = 1027076
(7)   WLAN-AKM-Suite = 1027073
(7)   Framed-MTU = 1400
(7)   EAP-Message =
0x02ef005f1900170303005400000000000000028d049eddc5bfe9aa9436e98e0c614313c43b433824efb840dc6b717e2392bad8fd494e3d6a1744be4803e9c04853db884927d60e0dc3250825680eadb7623a9f829f0e41d1e8dcd02ad55bff
(7)   State = 0x72f87ed4741767139eb6154612f031f0
(7)   Message-Authenticator = 0xd87793640ca96c6d3fdbd1654c4e7f03
(7) session-state: No cached attributes
(7) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(7)   authorize {
(7)     policy rewrite_calling_station_id {
(7)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(7)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
-> TRUE
(7)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(7)         update request {
(7)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(7)              --> YY-YY-YY-YY-YY-YY
(7)           &Calling-Station-Id := YY-YY-YY-YY-YY-YY
(7)         } # update request = noop
(7)         [updated] = updated
(7)       } # if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
= updated
(7)       ... skipping else: Preceding "if" was taken
(7)     } # policy rewrite_calling_station_id = updated
(7)     policy filter_username {
(7)       if (&User-Name) {
(7)       if (&User-Name)  -> TRUE
(7)       if (&User-Name)  {
(7)         if (&User-Name =~ / /) {
(7)         if (&User-Name =~ / /)  -> FALSE
(7)         if (&User-Name =~ /@[^@]*@/ ) {
(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)         if (&User-Name =~ /\.\./ ) {
(7)         if (&User-Name =~ /\.\./ )  -> FALSE
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(7)         if (&User-Name =~ /\.$/)  {
(7)         if (&User-Name =~ /\.$/)   -> FALSE
(7)         if (&User-Name =~ /@\./)  {
(7)         if (&User-Name =~ /@\./)   -> FALSE
(7)       } # if (&User-Name)  = updated
(7)     } # policy filter_username = updated
(7)     [preprocess] = ok
(7) auth_log: EXPAND
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(7) auth_log:    --> /var/log/freeradius/radacct/
192.168.1.1/auth-detail-20190218
(7) auth_log:
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to /var/log/freeradius/radacct/192.168.1.1/auth-detail-20190218
(7) auth_log: EXPAND %t
(7) auth_log:    --> Mon Feb 18 12:10:06 2019
(7)     [auth_log] = ok
(7)     [chap] = noop
(7)     [mschap] = noop
(7)     [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "vlado", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)     [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 239 length 95
(7) eap: Continuing tunnel setup
(7)     [eap] = ok
(7)   } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7)   authenticate {
(7) eap: Expiring EAP session with state 0x3bd67c043b3966c8
(7) eap: Finished EAP session with state 0x72f87ed474176713
(7) eap: Previous EAP request found for state 0x72f87ed474176713, released
from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: Continuing EAP-TLS
(7) eap_peap: [eaptls verify] = ok
(7) eap_peap: Done initial handshake
(7) eap_peap: [eaptls process] = ok
(7) eap_peap: Session established.  Decoding tunneled attributes
(7) eap_peap: PEAP state phase2
(7) eap_peap: EAP method MSCHAPv2 (26)
(7) eap_peap: Got tunneled request
(7) eap_peap:   EAP-Message =
0x02ef00401a02ef003b31d51e1cb57b23c4b8dcd7a4c2d336d68c000000000000000045293309e47d63ab7c4d563bf90ea80c909b91a52357760f00766c61646f
(7) eap_peap: Setting User-Name to vlado
(7) eap_peap: Sending tunneled request to inner-tunnel
(7) eap_peap:   EAP-Message =
0x02ef00401a02ef003b31d51e1cb57b23c4b8dcd7a4c2d336d68c000000000000000045293309e47d63ab7c4d563bf90ea80c909b91a52357760f00766c61646f
(7) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_peap:   User-Name = "vlado"
(7) eap_peap:   State = 0x3bd67c043b3966c8d43c1189a979d5ee
(7) Virtual server inner-tunnel received request
(7)   EAP-Message =
0x02ef00401a02ef003b31d51e1cb57b23c4b8dcd7a4c2d336d68c000000000000000045293309e47d63ab7c4d563bf90ea80c909b91a52357760f00766c61646f
(7)   FreeRADIUS-Proxied-To = 127.0.0.1
(7)   User-Name = "vlado"
(7)   State = 0x3bd67c043b3966c8d43c1189a979d5ee
(7) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(7) server inner-tunnel {
(7)   session-state: No cached attributes
(7)   # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(7)     authorize {
(7)       policy filter_username {
(7)         if (&User-Name) {
(7)         if (&User-Name)  -> TRUE
(7)         if (&User-Name)  {
(7)           if (&User-Name =~ / /) {
(7)           if (&User-Name =~ / /)  -> FALSE
(7)           if (&User-Name =~ /@[^@]*@/ ) {
(7)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)           if (&User-Name =~ /\.\./ ) {
(7)           if (&User-Name =~ /\.\./ )  -> FALSE
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
 -> FALSE
(7)           if (&User-Name =~ /\.$/)  {
(7)           if (&User-Name =~ /\.$/)   -> FALSE
(7)           if (&User-Name =~ /@\./)  {
(7)           if (&User-Name =~ /@\./)   -> FALSE
(7)         } # if (&User-Name)  = notfound
(7)       } # policy filter_username = notfound
(7)       [chap] = noop
(7)       [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "vlado", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)       [suffix] = noop
(7)       update control {
(7)         &Proxy-To-Realm := LOCAL
(7)       } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 239 length 64
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7)       [eap] = updated
(7)       [files] = noop
(7) sql: EXPAND %{User-Name}
(7) sql:    --> vlado
(7) sql: SQL-User-Name set to 'vlado'
rlm_sql (sql): Reserved connection (6)
(7) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
WHERE username = '%{SQL-User-Name}' ORDER BY id
(7) sql:    --> SELECT id, username, attribute, value, op FROM radcheck
WHERE username = 'vlado' ORDER BY id
(7) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radcheck WHERE username = 'vlado' ORDER BY id
(7) sql: User found in radcheck table
(7) sql: Conditional check items matched, merging assignment check items
(7) sql:   Cleartext-Password := "hello"
(7) sql:   Login-Time := "Al0001-2359"
(7) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply
WHERE username = '%{SQL-User-Name}' ORDER BY id
(7) sql:    --> SELECT id, username, attribute, value, op FROM radreply
WHERE username = 'vlado' ORDER BY id
(7) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radreply WHERE username = 'vlado' ORDER BY id
(7) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
'%{SQL-User-Name}' ORDER BY priority
(7) sql:    --> SELECT groupname FROM radusergroup WHERE username = 'vlado'
ORDER BY priority
(7) sql: Executing select query: SELECT groupname FROM radusergroup WHERE
username = 'vlado' ORDER BY priority
(7) sql: User not found in any groups
rlm_sql (sql): Released connection (6)
rlm_sql (sql): Need 1 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (8), 1 of 30 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket,
server version 10.1.23-MariaDB-9+deb9u1, protocol version 10
(7)       [sql] = ok
(7)       [expiration] = noop
(7) logintime: Checking Login-Time
(7) logintime: Login within allowed time-slot, 42600 seconds left in this
session
(7) logintime: reply:Session-Timeout set to 42600
(7)       [logintime] = updated
(7) pap: WARNING: Auth-Type already set.  Not setting to PAP
(7)       [pap] = noop
(7)     } # authorize = updated
(7)   Found Auth-Type = eap
(7)   # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(7)     authenticate {
(7) eap: Expiring EAP session with state 0x3bd67c043b3966c8
(7) eap: Finished EAP session with state 0x3bd67c043b3966c8
(7) eap: Previous EAP request found for state 0x3bd67c043b3966c8, released
from the list
(7) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(7) eap: Calling submodule eap_mschapv2 to process data
(7) eap_mschapv2: # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) eap_mschapv2:   authenticate {
(7) mschap: Found Cleartext-Password, hashing to create NT-Password
(7) mschap: Found Cleartext-Password, hashing to create LM-Password
(7) mschap: Creating challenge hash with username: vlado
(7) mschap: Client is using MS-CHAPv2
(7) mschap: Adding MS-CHAPv2 MPPE keys
(7)     [mschap] = ok
(7)   } # authenticate = ok
(7) MSCHAP Success
(7) eap: Sending EAP Request (code 1) ID 240 length 51
(7) eap: EAP session adding &reply:State = 0x3bd67c043a2666c8
(7)       [eap] = handled
(7)     } # authenticate = handled
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7)   Session-Timeout = 42600
(7)   EAP-Message =
0x01f000331a03ef002e533d38303836333636353137314341453543343245353533374632314344434632423645433743304633
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0x3bd67c043a2666c8d43c1189a979d5ee
(7) eap_peap: Got tunneled reply code 11
(7) eap_peap:   Session-Timeout = 42600
(7) eap_peap:   EAP-Message =
0x01f000331a03ef002e533d38303836333636353137314341453543343245353533374632314344434632423645433743304633
(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap:   State = 0x3bd67c043a2666c8d43c1189a979d5ee
(7) eap_peap: Got tunneled reply RADIUS code 11
(7) eap_peap:   Session-Timeout = 42600
(7) eap_peap:   EAP-Message =
0x01f000331a03ef002e533d38303836333636353137314341453543343245353533374632314344434632423645433743304633
(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap:   State = 0x3bd67c043a2666c8d43c1189a979d5ee
(7) eap_peap: Got tunneled Access-Challenge
(7) eap: Sending EAP Request (code 1) ID 240 length 82
(7) eap: EAP session adding &reply:State = 0x72f87ed475086713
(7)     [eap] = handled
(7)   } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) Post-Auth-Type sub-section not found.  Ignoring.
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7) Sent Access-Challenge Id 220 from 192.168.1.23:1812 to 192.168.1.1:37800
length 0
(7)   EAP-Message =
0x01f0005219001703030047eb7c72f8ba2aae866a83d0fa93f2378d63353a141e589443a711b2794e7263e31b69803529d7b248b2c2e4bded94fe49207d5c60242410f6627264e8075d0e62cea60b25b3d22d
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0x72f87ed4750867139eb6154612f031f0
(7) Finished request
Waking up in 4.8 seconds.
(8) Received Access-Request Id 221 from 192.168.1.1:37800 to
192.168.1.23:1812 length 263
(8)   User-Name = "vlado"
(8)   NAS-Identifier = "XXXXXXXXXXXX"
(8)   Called-Station-Id = "XX-XX-XX-XX-XX-XX:5GWlan"
(8)   NAS-Port-Type = Wireless-802.11
(8)   Service-Type = Framed-User
(8)   NAS-Port = 1
(8)   Calling-Station-Id = "YY-YY-YY-YY-YY-YY"
(8)   Connect-Info = "CONNECT 54Mbps 802.11a"
(8)   Acct-Session-Id = "AF67C8444C73C070"
(8)   Acct-Multi-Session-Id = "9D9725C5137C2DEA"
(8)   WLAN-Pairwise-Cipher = 1027076
(8)   WLAN-Group-Cipher = 1027076
(8)   WLAN-AKM-Suite = 1027073
(8)   Framed-MTU = 1400
(8)   EAP-Message =
0x02f000251900170303001a0000000000000003cab6ab01244543305634c416d37f3169210c
(8)   State = 0x72f87ed4750867139eb6154612f031f0
(8)   Message-Authenticator = 0x1595b52859659cf42bb39801bb18b306
(8) session-state: No cached attributes
(8) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(8)   authorize {
(8)     policy rewrite_calling_station_id {
(8)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(8)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
-> TRUE
(8)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(8)         update request {
(8)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(8)              --> YY-YY-YY-YY-YY-YY
(8)           &Calling-Station-Id := YY-YY-YY-YY-YY-YY
(8)         } # update request = noop
(8)         [updated] = updated
(8)       } # if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
= updated
(8)       ... skipping else: Preceding "if" was taken
(8)     } # policy rewrite_calling_station_id = updated
(8)     policy filter_username {
(8)       if (&User-Name) {
(8)       if (&User-Name)  -> TRUE
(8)       if (&User-Name)  {
(8)         if (&User-Name =~ / /) {
(8)         if (&User-Name =~ / /)  -> FALSE
(8)         if (&User-Name =~ /@[^@]*@/ ) {
(8)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)         if (&User-Name =~ /\.\./ ) {
(8)         if (&User-Name =~ /\.\./ )  -> FALSE
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(8)         if (&User-Name =~ /\.$/)  {
(8)         if (&User-Name =~ /\.$/)   -> FALSE
(8)         if (&User-Name =~ /@\./)  {
(8)         if (&User-Name =~ /@\./)   -> FALSE
(8)       } # if (&User-Name)  = updated
(8)     } # policy filter_username = updated
(8)     [preprocess] = ok
(8) auth_log: EXPAND
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(8) auth_log:    --> /var/log/freeradius/radacct/
192.168.1.1/auth-detail-20190218
(8) auth_log:
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to /var/log/freeradius/radacct/192.168.1.1/auth-detail-20190218
(8) auth_log: EXPAND %t
(8) auth_log:    --> Mon Feb 18 12:10:06 2019
(8)     [auth_log] = ok
(8)     [chap] = noop
(8)     [mschap] = noop
(8)     [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "vlado", looking up realm NULL
(8) suffix: No such realm "NULL"
(8)     [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 240 length 37
(8) eap: Continuing tunnel setup
(8)     [eap] = ok
(8)   } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(8)   authenticate {
(8) eap: Expiring EAP session with state 0x3bd67c043a2666c8
(8) eap: Finished EAP session with state 0x72f87ed475086713
(8) eap: Previous EAP request found for state 0x72f87ed475086713, released
from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: Continuing EAP-TLS
(8) eap_peap: [eaptls verify] = ok
(8) eap_peap: Done initial handshake
(8) eap_peap: [eaptls process] = ok
(8) eap_peap: Session established.  Decoding tunneled attributes
(8) eap_peap: PEAP state phase2
(8) eap_peap: EAP method MSCHAPv2 (26)
(8) eap_peap: Got tunneled request
(8) eap_peap:   EAP-Message = 0x02f000061a03
(8) eap_peap: Setting User-Name to vlado
(8) eap_peap: Sending tunneled request to inner-tunnel
(8) eap_peap:   EAP-Message = 0x02f000061a03
(8) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(8) eap_peap:   User-Name = "vlado"
(8) eap_peap:   State = 0x3bd67c043a2666c8d43c1189a979d5ee
(8) Virtual server inner-tunnel received request
(8)   EAP-Message = 0x02f000061a03
(8)   FreeRADIUS-Proxied-To = 127.0.0.1
(8)   User-Name = "vlado"
(8)   State = 0x3bd67c043a2666c8d43c1189a979d5ee
(8) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(8) server inner-tunnel {
(8)   session-state: No cached attributes
(8)   # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(8)     authorize {
(8)       policy filter_username {
(8)         if (&User-Name) {
(8)         if (&User-Name)  -> TRUE
(8)         if (&User-Name)  {
(8)           if (&User-Name =~ / /) {
(8)           if (&User-Name =~ / /)  -> FALSE
(8)           if (&User-Name =~ /@[^@]*@/ ) {
(8)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)           if (&User-Name =~ /\.\./ ) {
(8)           if (&User-Name =~ /\.\./ )  -> FALSE
(8)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(8)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
 -> FALSE
(8)           if (&User-Name =~ /\.$/)  {
(8)           if (&User-Name =~ /\.$/)   -> FALSE
(8)           if (&User-Name =~ /@\./)  {
(8)           if (&User-Name =~ /@\./)   -> FALSE
(8)         } # if (&User-Name)  = notfound
(8)       } # policy filter_username = notfound
(8)       [chap] = noop
(8)       [mschap] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "vlado", looking up realm NULL
(8) suffix: No such realm "NULL"
(8)       [suffix] = noop
(8)       update control {
(8)         &Proxy-To-Realm := LOCAL
(8)       } # update control = noop
(8) eap: Peer sent EAP Response (code 2) ID 240 length 6
(8) eap: No EAP Start, assuming it's an on-going EAP conversation
(8)       [eap] = updated
(8)       [files] = noop
(8) sql: EXPAND %{User-Name}
(8) sql:    --> vlado
(8) sql: SQL-User-Name set to 'vlado'
rlm_sql (sql): Reserved connection (7)
(8) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
WHERE username = '%{SQL-User-Name}' ORDER BY id
(8) sql:    --> SELECT id, username, attribute, value, op FROM radcheck
WHERE username = 'vlado' ORDER BY id
(8) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radcheck WHERE username = 'vlado' ORDER BY id
(8) sql: User found in radcheck table
(8) sql: Conditional check items matched, merging assignment check items
(8) sql:   Cleartext-Password := "hello"
(8) sql:   Login-Time := "Al0001-2359"
(8) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply
WHERE username = '%{SQL-User-Name}' ORDER BY id
(8) sql:    --> SELECT id, username, attribute, value, op FROM radreply
WHERE username = 'vlado' ORDER BY id
(8) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radreply WHERE username = 'vlado' ORDER BY id
(8) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
'%{SQL-User-Name}' ORDER BY priority
(8) sql:    --> SELECT groupname FROM radusergroup WHERE username = 'vlado'
ORDER BY priority
(8) sql: Executing select query: SELECT groupname FROM radusergroup WHERE
username = 'vlado' ORDER BY priority
(8) sql: User not found in any groups
rlm_sql (sql): Released connection (7)
(8)       [sql] = ok
(8)       [expiration] = noop
(8) logintime: Checking Login-Time
(8) logintime: Login within allowed time-slot, 42600 seconds left in this
session
(8) logintime: reply:Session-Timeout set to 42600
(8)       [logintime] = updated
(8) pap: WARNING: Auth-Type already set.  Not setting to PAP
(8)       [pap] = noop
(8)     } # authorize = updated
(8)   Found Auth-Type = eap
(8)   # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(8)     authenticate {
(8) eap: Expiring EAP session with state 0x3bd67c043a2666c8
(8) eap: Finished EAP session with state 0x3bd67c043a2666c8
(8) eap: Previous EAP request found for state 0x3bd67c043a2666c8, released
from the list
(8) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(8) eap: Calling submodule eap_mschapv2 to process data
(8) eap: Sending EAP Success (code 3) ID 240 length 4
(8) eap: Freeing handler
(8)       [eap] = ok
(8)     } # authenticate = ok
(8)   # Executing section post-auth from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(8)     post-auth {
(8) sql: EXPAND .query
(8) sql:    --> .query
(8) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (6)
(8) sql: EXPAND %{User-Name}
(8) sql:    --> vlado
(8) sql: SQL-User-Name set to 'vlado'
(8) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S')
(8) sql:    --> INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( 'vlado', '', 'Access-Accept', '2019-02-18 12:10:06')
(8) sql: Executing query: INSERT INTO radpostauth (username, pass, reply,
authdate) VALUES ( 'vlado', '', 'Access-Accept', '2019-02-18 12:10:06')
(8) sql: SQL query returned: success
(8) sql: 1 record(s) updated
rlm_sql (sql): Released connection (6)
(8)       [sql] = ok
(8)     } # post-auth = ok
(8)   Login OK: [vlado] (from client my-AP-1 port 0 via TLS tunnel)
(8) } # server inner-tunnel
(8) Virtual server sending reply
(8)   Session-Timeout = 42600
(8)   MS-MPPE-Encryption-Policy = Encryption-Allowed
(8)   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(8)   MS-MPPE-Send-Key = 0x4b4c5c28145d2c0c352925052fae8e58
(8)   MS-MPPE-Recv-Key = 0x8b6f27381adac6e182a0f2443409f8e3
(8)   EAP-Message = 0x03f00004
(8)   Message-Authenticator = 0x00000000000000000000000000000000
(8)   User-Name = "vlado"
(8) eap_peap: Got tunneled reply code 2
(8) eap_peap:   Session-Timeout = 42600
(8) eap_peap:   MS-MPPE-Encryption-Policy = Encryption-Allowed
(8) eap_peap:   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(8) eap_peap:   MS-MPPE-Send-Key = 0x4b4c5c28145d2c0c352925052fae8e58
(8) eap_peap:   MS-MPPE-Recv-Key = 0x8b6f27381adac6e182a0f2443409f8e3
(8) eap_peap:   EAP-Message = 0x03f00004
(8) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap:   User-Name = "vlado"
(8) eap_peap: Got tunneled reply RADIUS code 2
(8) eap_peap:   Session-Timeout = 42600
(8) eap_peap:   MS-MPPE-Encryption-Policy = Encryption-Allowed
(8) eap_peap:   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(8) eap_peap:   MS-MPPE-Send-Key = 0x4b4c5c28145d2c0c352925052fae8e58
(8) eap_peap:   MS-MPPE-Recv-Key = 0x8b6f27381adac6e182a0f2443409f8e3
(8) eap_peap:   EAP-Message = 0x03f00004
(8) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap:   User-Name = "vlado"
(8) eap_peap: Tunneled authentication was successful
(8) eap_peap: SUCCESS
(8) eap: Sending EAP Request (code 1) ID 241 length 46
(8) eap: EAP session adding &reply:State = 0x72f87ed47a096713
(8)     [eap] = handled
(8)   } # authenticate = handled
(8) Using Post-Auth-Type Challenge
(8) Post-Auth-Type sub-section not found.  Ignoring.
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(8) Sent Access-Challenge Id 221 from 192.168.1.23:1812 to 192.168.1.1:37800
length 0
(8)   EAP-Message =
0x01f1002e19001703030023eb7c72f8ba2aae873af124abd0268e66b7f7d25a991fc6b05ce735dcf9281cd986dd6c
(8)   Message-Authenticator = 0x00000000000000000000000000000000
(8)   State = 0x72f87ed47a0967139eb6154612f031f0
(8) Finished request
Waking up in 4.6 seconds.
(9) Received Access-Request Id 222 from 192.168.1.1:37800 to
192.168.1.23:1812 length 272
(9)   User-Name = "vlado"
(9)   NAS-Identifier = "XXXXXXXXXXXX"
(9)   Called-Station-Id = "XX-XX-XX-XX-XX-XX:5GWlan"
(9)   NAS-Port-Type = Wireless-802.11
(9)   Service-Type = Framed-User
(9)   NAS-Port = 1
(9)   Calling-Station-Id = "YY-YY-YY-YY-YY-YY"
(9)   Connect-Info = "CONNECT 54Mbps 802.11a"
(9)   Acct-Session-Id = "AF67C8444C73C070"
(9)   Acct-Multi-Session-Id = "9D9725C5137C2DEA"
(9)   WLAN-Pairwise-Cipher = 1027076
(9)   WLAN-Group-Cipher = 1027076
(9)   WLAN-AKM-Suite = 1027073
(9)   Framed-MTU = 1400
(9)   EAP-Message =
0x02f1002e1900170303002300000000000000048bb4f4aa5383a62b4232fb260abbd5022e8347be791dfe4220a954
(9)   State = 0x72f87ed47a0967139eb6154612f031f0
(9)   Message-Authenticator = 0x782d212c869d290bc286fe1df482eaa2
(9) session-state: No cached attributes
(9) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(9)   authorize {
(9)     policy rewrite_calling_station_id {
(9)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(9)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
-> TRUE
(9)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(9)         update request {
(9)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(9)              --> YY-YY-YY-YY-YY-YY
(9)           &Calling-Station-Id := YY-YY-YY-YY-YY-YY
(9)         } # update request = noop
(9)         [updated] = updated
(9)       } # if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
= updated
(9)       ... skipping else: Preceding "if" was taken
(9)     } # policy rewrite_calling_station_id = updated
(9)     policy filter_username {
(9)       if (&User-Name) {
(9)       if (&User-Name)  -> TRUE
(9)       if (&User-Name)  {
(9)         if (&User-Name =~ / /) {
(9)         if (&User-Name =~ / /)  -> FALSE
(9)         if (&User-Name =~ /@[^@]*@/ ) {
(9)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(9)         if (&User-Name =~ /\.\./ ) {
(9)         if (&User-Name =~ /\.\./ )  -> FALSE
(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(9)         if (&User-Name =~ /\.$/)  {
(9)         if (&User-Name =~ /\.$/)   -> FALSE
(9)         if (&User-Name =~ /@\./)  {
(9)         if (&User-Name =~ /@\./)   -> FALSE
(9)       } # if (&User-Name)  = updated
(9)     } # policy filter_username = updated
(9)     [preprocess] = ok
(9) auth_log: EXPAND
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(9) auth_log:    --> /var/log/freeradius/radacct/
192.168.1.1/auth-detail-20190218
(9) auth_log:
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to /var/log/freeradius/radacct/192.168.1.1/auth-detail-20190218
(9) auth_log: EXPAND %t
(9) auth_log:    --> Mon Feb 18 12:10:06 2019
(9)     [auth_log] = ok
(9)     [chap] = noop
(9)     [mschap] = noop
(9)     [digest] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "vlado", looking up realm NULL
(9) suffix: No such realm "NULL"
(9)     [suffix] = noop
(9) eap: Peer sent EAP Response (code 2) ID 241 length 46
(9) eap: Continuing tunnel setup
(9)     [eap] = ok
(9)   } # authorize = ok
(9) Found Auth-Type = eap
(9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(9)   authenticate {
(9) eap: Expiring EAP session with state 0x72f87ed47a096713
(9) eap: Finished EAP session with state 0x72f87ed47a096713
(9) eap: Previous EAP request found for state 0x72f87ed47a096713, released
from the list
(9) eap: Peer sent packet with method EAP PEAP (25)
(9) eap: Calling submodule eap_peap to process data
(9) eap_peap: Continuing EAP-TLS
(9) eap_peap: [eaptls verify] = ok
(9) eap_peap: Done initial handshake
(9) eap_peap: [eaptls process] = ok
(9) eap_peap: Session established.  Decoding tunneled attributes
(9) eap_peap: PEAP state send tlv success
(9) eap_peap: Received EAP-TLV response
(9) eap_peap: Success
(9) eap: Sending EAP Success (code 3) ID 241 length 4
(9) eap: Freeing handler
(9)     [eap] = ok
(9)   } # authenticate = ok
(9) # Executing section post-auth from file
/etc/freeradius/3.0/sites-enabled/default
(9)   post-auth {
(9)     update {
(9)       No attributes updated
(9)     } # update = noop
(9) sql: EXPAND .query
(9) sql:    --> .query
(9) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (8)
(9) sql: EXPAND %{User-Name}
(9) sql:    --> vlado
(9) sql: SQL-User-Name set to 'vlado'
(9) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S')
(9) sql:    --> INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( 'vlado', '', 'Access-Accept', '2019-02-18 12:10:06')
(9) sql: Executing query: INSERT INTO radpostauth (username, pass, reply,
authdate) VALUES ( 'vlado', '', 'Access-Accept', '2019-02-18 12:10:06')
(9) sql: SQL query returned: success
(9) sql: 1 record(s) updated
rlm_sql (sql): Released connection (8)
(9)     [sql] = ok
(9)     [exec] = noop
(9)     policy remove_reply_message_if_eap {
(9)       if (&reply:EAP-Message && &reply:Reply-Message) {
(9)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(9)       else {
(9)         [noop] = noop
(9)       } # else = noop
(9)     } # policy remove_reply_message_if_eap = noop
(9)   } # post-auth = ok
(9) Login OK: [vlado] (from client my-AP-1 port 1 cli YY-YY-YY-YY-YY-YY)
(9) Sent Access-Accept Id 222 from 192.168.1.23:1812 to 192.168.1.1:37800
length 0
(9)   MS-MPPE-Recv-Key =
0x5ba56ee87c023d7231c36407b21c91ec1843f056290992c28508022a9a9e64fa
(9)   MS-MPPE-Send-Key =
0x97ba68564e7dc0a5084ba5105d74d53b46b0ca2a67da15641f7c872b8aec6565
(9)   EAP-Message = 0x03f10004
(9)   Message-Authenticator = 0x00000000000000000000000000000000
(9)   User-Name = "vlado"
(9) Finished request
Waking up in 4.6 seconds.
(10) Received Accounting-Request Id 223 from 192.168.1.1:43128 to
192.168.1.23:1813 length 206
(10)   Acct-Status-Type = Start
(10)   Acct-Authentic = RADIUS
(10)   User-Name = "vlado"
(10)   NAS-Identifier = "XXXXXXXXXXXX"
(10)   Called-Station-Id = "XX-XX-XX-XX-XX-XX:5GWlan"
(10)   NAS-Port-Type = Wireless-802.11
(10)   Service-Type = Framed-User
(10)   NAS-Port = 1
(10)   Calling-Station-Id = "YY-YY-YY-YY-YY-YY"
(10)   Connect-Info = "CONNECT 54Mbps 802.11a"
(10)   Acct-Session-Id = "AF67C8444C73C070"
(10)   Acct-Multi-Session-Id = "9D9725C5137C2DEA"
(10)   WLAN-Pairwise-Cipher = 1027076
(10)   WLAN-Group-Cipher = 1027076
(10)   WLAN-AKM-Suite = 1027073
(10)   Event-Timestamp = "Feb 18 2019 12:10:06 CET"
(10)   Acct-Delay-Time = 0
(10) # Executing section preacct from file
/etc/freeradius/3.0/sites-enabled/default
(10)   preacct {
(10)     policy rewrite_calling_station_id {
(10)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(10)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
-> TRUE
(10)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(10)         update request {
(10)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(10)              --> YY-YY-YY-YY-YY-YY
(10)           &Calling-Station-Id := YY-YY-YY-YY-YY-YY
(10)         } # update request = noop
(10)         [updated] = updated
(10)       } # if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
= updated
(10)       ... skipping else: Preceding "if" was taken
(10)     } # policy rewrite_calling_station_id = updated
(10)     [preprocess] = ok
(10)     policy acct_unique {
(10)       update request {
(10)         &Tmp-String-9 := "ai:"
(10)       } # update request = noop
(10)       if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) {
(10)       EXPAND %{hex:&Class}
(10)          -->
(10)       EXPAND ^%{hex:&Tmp-String-9}
(10)          --> ^61693a
(10)       if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i))  -> FALSE
(10)       else {
(10)         update request {
(10)           EXPAND
%{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
(10)              --> a2134571c07be7a11c77ce01067a80b5
(10)           &Acct-Unique-Session-Id := a2134571c07be7a11c77ce01067a80b5
(10)         } # update request = noop
(10)       } # else = noop
(10)     } # policy acct_unique = noop
(10) suffix: Checking for suffix after "@"
(10) suffix: No '@' in User-Name = "vlado", looking up realm NULL
(10) suffix: No such realm "NULL"
(10)     [suffix] = noop
(10)     [files] = noop
(10)   } # preacct = updated
(10) # Executing section accounting from file
/etc/freeradius/3.0/sites-enabled/default
(10)   accounting {
(10) detail: EXPAND
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d
(10) detail:    --> /var/log/freeradius/radacct/192.168.1.1/detail-20190218
(10) detail:
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d
expands to /var/log/freeradius/radacct/192.168.1.1/detail-20190218
(10) detail: EXPAND %t
(10) detail:    --> Mon Feb 18 12:10:06 2019
(10)     [detail] = ok
(10)     [unix] = ok
(10) sradutmp: EXPAND /var/log/freeradius/sradutmp
(10) sradutmp:    --> /var/log/freeradius/sradutmp
(10) sradutmp: EXPAND %{User-Name}
(10) sradutmp:    --> vlado
(10)     [sradutmp] = ok
(10) sql: EXPAND %{tolower:type.%{Acct-Status-Type}.query}
(10) sql:    --> type.start.query
(10) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (7)
(10) sql: EXPAND %{User-Name}
(10) sql:    --> vlado
(10) sql: SQL-User-Name set to 'vlado'
(10) sql: EXPAND INSERT INTO radacct (acctsessionid, acctuniqueid, username,
realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime,
acctstoptime, acctsessiontime, acctauthentic, connectinfo_start,
connectinfo_stop,
acctinputoctets, acctoutputoctets, calledstationid, callingstationid,
acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES
('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
'%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}',
'%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}),
FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}',
'%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}')
(10) sql:    --> INSERT INTO radacct (acctsessionid, acctuniqueid, username,
realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime,
acctstoptime, acctsessiontime, acctauthentic, connectinfo_start,
connectinfo_stop,
acctinputoctets, acctoutputoctets, calledstationid, callingstationid,
acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES
('AF67C8444C73C070', 'a2134571c07be7a11c77ce01067a80b5', 'vlado', '',
'192.168.1.1', '1', 'Wireless-802.11', FROM_UNIXTIME(1550488206),
FROM_UNIXTIME(1550488206), NULL, '0', 'RADIUS', 'CONNECT 54Mbps 802.11a',
'', '0', '0', 'XX-XX-XX-XX-XX-XX:5GWlan', 'YY-YY-YY-YY-YY-YY', '',
'Framed-User', '', '')
(10) sql: Executing query: INSERT INTO radacct (acctsessionid,
acctuniqueid, username,
realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime,
acctstoptime, acctsessiontime, acctauthentic, connectinfo_start,
connectinfo_stop,
acctinputoctets, acctoutputoctets, calledstationid, callingstationid,
acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES
('AF67C8444C73C070', 'a2134571c07be7a11c77ce01067a80b5', 'vlado', '',
'192.168.1.1', '1', 'Wireless-802.11', FROM_UNIXTIME(1550488206),
FROM_UNIXTIME(1550488206), NULL, '0', 'RADIUS', 'CONNECT 54Mbps 802.11a',
'', '0', '0', 'XX-XX-XX-XX-XX-XX:5GWlan', 'YY-YY-YY-YY-YY-YY', '',
'Framed-User', '', '')
(10) sql: SQL query returned: success
(10) sql: 1 record(s) updated
rlm_sql (sql): Released connection (7)
(10)     [sql] = ok
(10)     if ( "%{sql: SELECT IFNULL (SUM(AcctSessionTime),0) FROM radacct
where UserName='%{User-Name}'}" > "%{sql: SELECT value from radcheck where
username='%{User-Name}' and attribute='Max-Daily-Session'}" ) {
(10)     EXPAND %{User-Name}
(10)        --> vlado
(10)     SQL-User-Name set to 'vlado'
rlm_sql (sql): Reserved connection (6)
(10)     Executing select query:  SELECT IFNULL (SUM(AcctSessionTime),0)
FROM radacct where UserName='vlado'
rlm_sql (sql): Released connection (6)
(10)     EXPAND %{sql: SELECT IFNULL (SUM(AcctSessionTime),0) FROM radacct
where UserName='%{User-Name}'}
(10)        --> 0
(10)     EXPAND %{User-Name}
(10)        --> vlado
(10)     SQL-User-Name set to 'vlado'
rlm_sql (sql): Reserved connection (8)
(10)     Executing select query:  SELECT value from radcheck where
username='vlado' and attribute='Max-Daily-Session'
(10)     SQL query returned no results
rlm_sql (sql): Released connection (8)
(10)     EXPAND %{sql: SELECT value from radcheck where
username='%{User-Name}' and attribute='Max-Daily-Session'}
(10)        -->
(10)     if ( "%{sql: SELECT IFNULL (SUM(AcctSessionTime),0) FROM radacct
where UserName='%{User-Name}'}" > "%{sql: SELECT value from radcheck where
username='%{User-Name}' and attribute='Max-Daily-Session'}" )  -> TRUE
(10)     if ( "%{sql: SELECT IFNULL (SUM(AcctSessionTime),0) FROM radacct
where UserName='%{User-Name}'}" > "%{sql: SELECT value from radcheck where
username='%{User-Name}' and attribute='Max-Daily-Session'}" )  {
(10)       update disconnect {
(10)         EXPAND %{Acct-Session-Id}
(10)            --> AF67C8444C73C070
(10)         &Acct-Session-Id = AF67C8444C73C070
(10)         EXPAND %{User-Name}
(10)            --> vlado
(10)         &User-Name = vlado
(10)         EXPAND %{Calling-Station-Id}
(10)            --> YY-YY-YY-YY-YY-YY
(10)         &Calling-Station-Id = YY-YY-YY-YY-YY-YY
(10)       } # update disconnect = noop
(10)     } # if ( "%{sql: SELECT IFNULL (SUM(AcctSessionTime),0) FROM
radacct where UserName='%{User-Name}'}" > "%{sql: SELECT value from
radcheck where username='%{User-Name}' and attribute='Max-Daily-Session'}"
)  = noop
(10)     [exec] = noop
(10) attr_filter.accounting_response: EXPAND %{User-Name}
(10) attr_filter.accounting_response:    --> vlado
(10) attr_filter.accounting_response: Matched entry DEFAULT at line 12
(10)     [attr_filter.accounting_response] = updated
(10)   } # accounting = updated
(10) Sent Disconnect-Request Id 121 from 0.0.0.0:45765 to 192.168.1.1:3799
length 64
(10)   Acct-Session-Id = "AF67C8444C73C070"
(10)   User-Name = "vlado"
(10)   Calling-Station-Id = "YY-YY-YY-YY-YY-YY"
(10) Sent Accounting-Response Id 223 from 192.168.1.23:1813 to
192.168.1.1:43128 length 0
(10) Finished request
(10) Cleaning up request packet ID 223 with timestamp +68
Waking up in 1.9 seconds.
(11) Received Accounting-Request Id 224 from 192.168.1.1:43128 to
192.168.1.23:1813 length 248
(11)   Acct-Status-Type = Stop
(11)   Acct-Authentic = RADIUS
(11)   User-Name = "vlado"
(11)   NAS-Identifier = "XXXXXXXXXXXX"
(11)   Called-Station-Id = "XX-XX-XX-XX-XX-XX:5GWlan"
(11)   NAS-Port-Type = Wireless-802.11
(11)   Service-Type = Framed-User
(11)   NAS-Port = 1
(11)   Calling-Station-Id = "YY-YY-YY-YY-YY-YY"
(11)   Connect-Info = "CONNECT 54Mbps 802.11a"
(11)   Acct-Session-Id = "AF67C8444C73C070"
(11)   Acct-Multi-Session-Id = "9D9725C5137C2DEA"
(11)   WLAN-Pairwise-Cipher = 1027076
(11)   WLAN-Group-Cipher = 1027076
(11)   WLAN-AKM-Suite = 1027073
(11)   Event-Timestamp = "Feb 18 2019 12:10:06 CET"
(11)   Acct-Delay-Time = 0
(11)   Acct-Session-Time = 0
(11)   Acct-Input-Packets = 70
(11)   Acct-Output-Packets = 35
(11)   Acct-Input-Octets = 4875
(11)   Acct-Input-Gigawords = 0
(11)   Acct-Output-Octets = 6463
(11)   Acct-Output-Gigawords = 0
(11) # Executing section preacct from file
/etc/freeradius/3.0/sites-enabled/default
(11)   preacct {
(11)     policy rewrite_calling_station_id {
(11)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(11)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
-> TRUE
(11)       if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(11)         update request {
(11)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(11)              --> YY-YY-YY-YY-YY-YY
(11)           &Calling-Station-Id := YY-YY-YY-YY-YY-YY
(11)         } # update request = noop
(11)         [updated] = updated
(11)       } # if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
= updated
(11)       ... skipping else: Preceding "if" was taken
(11)     } # policy rewrite_calling_station_id = updated
(11)     [preprocess] = ok
(11)     policy acct_unique {
(11)       update request {
(11)         &Tmp-String-9 := "ai:"
(11)       } # update request = noop
(11)       if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) {
(11)       EXPAND %{hex:&Class}
(11)          -->
(11)       EXPAND ^%{hex:&Tmp-String-9}
(11)          --> ^61693a
(11)       if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i))  -> FALSE
(11)       else {
(11)         update request {
(11)           EXPAND
%{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
(11)              --> a2134571c07be7a11c77ce01067a80b5
(11)           &Acct-Unique-Session-Id := a2134571c07be7a11c77ce01067a80b5
(11)         } # update request = noop
(11)       } # else = noop
(11)     } # policy acct_unique = noop
(11) suffix: Checking for suffix after "@"
(11) suffix: No '@' in User-Name = "vlado", looking up realm NULL
(11) suffix: No such realm "NULL"
(11)     [suffix] = noop
(11)     [files] = noop
(11)   } # preacct = updated
(11) # Executing section accounting from file
/etc/freeradius/3.0/sites-enabled/default
(11)   accounting {
(11) detail: EXPAND
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d
(11) detail:    --> /var/log/freeradius/radacct/192.168.1.1/detail-20190218
(11) detail:
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d
expands to /var/log/freeradius/radacct/192.168.1.1/detail-20190218
(11) detail: EXPAND %t
(11) detail:    --> Mon Feb 18 12:10:06 2019
(11)     [detail] = ok
(11)     [unix] = ok
(11) sradutmp: EXPAND /var/log/freeradius/sradutmp
(11) sradutmp:    --> /var/log/freeradius/sradutmp
(11) sradutmp: EXPAND %{User-Name}
(11) sradutmp:    --> vlado
(11)     [sradutmp] = ok
(11) sql: EXPAND %{tolower:type.%{Acct-Status-Type}.query}
(11) sql:    --> type.stop.query
(11) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (7)
(11) sql: EXPAND %{User-Name}
(11) sql:    --> vlado
(11) sql: SQL-User-Name set to 'vlado'
(11) sql: EXPAND UPDATE radacct SET acctstoptime =
FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
%{%{Acct-Session-Time}:-NULL}, acctinputoctets =
'%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}', acctterminatecause =
'%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
AcctUniqueId = '%{Acct-Unique-Session-Id}'
(11) sql:    --> UPDATE radacct SET acctstoptime =
FROM_UNIXTIME(1550488206), acctsessiontime = 0, acctinputoctets = '0' << 32
| '4875', acctoutputoctets = '0' << 32 | '6463', acctterminatecause = '',
connectinfo_stop = 'CONNECT 54Mbps 802.11a' WHERE AcctUniqueId =
'a2134571c07be7a11c77ce01067a80b5'
(11) sql: Executing query: UPDATE radacct SET acctstoptime =
FROM_UNIXTIME(1550488206), acctsessiontime = 0, acctinputoctets = '0' << 32
| '4875', acctoutputoctets = '0' << 32 | '6463', acctterminatecause = '',
connectinfo_stop = 'CONNECT 54Mbps 802.11a' WHERE AcctUniqueId =
'a2134571c07be7a11c77ce01067a80b5'
rlm_sql_mysql: Rows matched: 1  Changed: 1  Warnings: 0
(11) sql: SQL query returned: success
(11) sql: 1 record(s) updated
rlm_sql (sql): Released connection (7)
(11)     [sql] = ok
(11)     if ( "%{sql: SELECT IFNULL (SUM(AcctSessionTime),0) FROM radacct
where UserName='%{User-Name}'}" > "%{sql: SELECT value from radcheck where
username='%{User-Name}' and attribute='Max-Daily-Session'}" ) {
(11)     EXPAND %{User-Name}
(11)        --> vlado
(11)     SQL-User-Name set to 'vlado'
rlm_sql (sql): Reserved connection (6)
(11)     Executing select query:  SELECT IFNULL (SUM(AcctSessionTime),0)
FROM radacct where UserName='vlado'
rlm_sql (sql): Released connection (6)
(11)     EXPAND %{sql: SELECT IFNULL (SUM(AcctSessionTime),0) FROM radacct
where UserName='%{User-Name}'}
(11)        --> 0
(11)     EXPAND %{User-Name}
(11)        --> vlado
(11)     SQL-User-Name set to 'vlado'
rlm_sql (sql): Reserved connection (8)
(11)     Executing select query:  SELECT value from radcheck where
username='vlado' and attribute='Max-Daily-Session'
(11)     SQL query returned no results
rlm_sql (sql): Released connection (8)
(11)     EXPAND %{sql: SELECT value from radcheck where
username='%{User-Name}' and attribute='Max-Daily-Session'}
(11)        -->
(11)     if ( "%{sql: SELECT IFNULL (SUM(AcctSessionTime),0) FROM radacct
where UserName='%{User-Name}'}" > "%{sql: SELECT value from radcheck where
username='%{User-Name}' and attribute='Max-Daily-Session'}" )  -> TRUE
(11)     if ( "%{sql: SELECT IFNULL (SUM(AcctSessionTime),0) FROM radacct
where UserName='%{User-Name}'}" > "%{sql: SELECT value from radcheck where
username='%{User-Name}' and attribute='Max-Daily-Session'}" )  {
(11)       update disconnect {
(11)         EXPAND %{Acct-Session-Id}
(11)            --> AF67C8444C73C070
(11)         &Acct-Session-Id = AF67C8444C73C070
(11)         EXPAND %{User-Name}
(11)            --> vlado
(11)         &User-Name = vlado
(11)         EXPAND %{Calling-Station-Id}
(11)            --> YY-YY-YY-YY-YY-YY
(11)         &Calling-Station-Id = YY-YY-YY-YY-YY-YY
(11)       } # update disconnect = noop
(11)     } # if ( "%{sql: SELECT IFNULL (SUM(AcctSessionTime),0) FROM
radacct where UserName='%{User-Name}'}" > "%{sql: SELECT value from
radcheck where username='%{User-Name}' and attribute='Max-Daily-Session'}"
)  = noop
(11)     [exec] = noop
(11) attr_filter.accounting_response: EXPAND %{User-Name}
(11) attr_filter.accounting_response:    --> vlado
(11) attr_filter.accounting_response: Matched entry DEFAULT at line 12
(11)     [attr_filter.accounting_response] = updated
(11)   } # accounting = updated
(11) Sent Disconnect-Request Id 246 from 0.0.0.0:45765 to 192.168.1.1:3799
length 64
(11)   Acct-Session-Id = "AF67C8444C73C070"
(11)   User-Name = "vlado"
(11)   Calling-Station-Id = "YY-YY-YY-YY-YY-YY"
(11) Sent Accounting-Response Id 224 from 192.168.1.23:1813 to
192.168.1.1:43128 length 0
(11) Finished request
(11) Cleaning up request packet ID 224 with timestamp +68
Waking up in 1.8 seconds.
(10) Marking home server 192.168.1.1 port 3799 alive
(10) Clearing existing &reply: attributes
(10) Received Disconnect-ACK Id 121 from 192.168.1.1:3799 to
192.168.1.23:45765 length 44
(10)   Event-Timestamp = "Feb 18 2019 12:10:06 CET"
(10)   Message-Authenticator = 0xae87fb6ddac4f1f4c3cc317c01ba3d06
(10) # Executing section post-proxy from file
/etc/freeradius/3.0/sites-enabled/default
(10)   post-proxy {
(10) eap: No pre-existing handler found
(10)     [eap] = noop
(10)   } # post-proxy = noop
(10) Cleaning up request packet ID 223 with timestamp +68
Waking up in 2.2 seconds.
(11) Clearing existing &reply: attributes
(11) Received Disconnect-NAK Id 246 from 192.168.1.1:3799 to
192.168.1.23:45765 length 50
(11)   Error-Cause = Session-Context-Not-Found
(11)   Event-Timestamp = "Feb 18 2019 12:10:06 CET"
(11)   Message-Authenticator = 0x0e1e7e91440f0e7214127159319c047d
(11) # Executing section post-proxy from file
/etc/freeradius/3.0/sites-enabled/default
(11)   post-proxy {
(11) eap: No pre-existing handler found
(11)     [eap] = noop
(11)   } # post-proxy = noop
(11) Cleaning up request packet ID 224 with timestamp +68
Waking up in 4.5 seconds.
(0) Cleaning up request packet ID 213 with timestamp +67
(1) Cleaning up request packet ID 214 with timestamp +67
(2) Cleaning up request packet ID 215 with timestamp +67
(3) Cleaning up request packet ID 216 with timestamp +67
(4) Cleaning up request packet ID 217 with timestamp +67
(5) Cleaning up request packet ID 218 with timestamp +68
(6) Cleaning up request packet ID 219 with timestamp +68
(7) Cleaning up request packet ID 220 with timestamp +68
Waking up in 0.1 seconds.
(8) Cleaning up request packet ID 221 with timestamp +68
(9) Cleaning up request packet ID 222 with timestamp +68
Ready to process requests

Unexpected Disconnect Message to NAS

Vladimir Cvetic