On Oct 16, 2024, at 8:44 AM, Saied Ahadi <saiedahadi@gmail.com> wrote:
I am having some trouble moving from FR2 to FR3. I did a fresh install recently on FR3. Authentication part is working correctly. However I noticed that most of the time the Framed IP address and FramedProtocol are not written correctly into the mysql database.
What does that mean?
I am sure I have incorrectly setup something but since I don't understand how I can go ahead and trouble shoot this matter.
The usual approach of reading the debug output should help.
Here are the logs use freeradius -X
... (0) Received Access-Request Id 91 from 143.198.146.8:56216 to 67.205.156.27:1812 length 186 (0) Service-Type = Framed-User (0) Framed-Protocol = PPP (0) NAS-Port = 15728640 (0) NAS-Port-Type = Ethernet (0) User-Name = "saied" (0) Calling-Station-Id = "0C:DC:B7:B1:00:00" (0) NAS-Port-Id = "ether2" (0) Acct-Session-Id = "81b00000" (0) MS-CHAP-Challenge = 0x1e86ccb35ca835cd91f0010ed05ef9f8 (0) MS-CHAP2-Response = 0x0100b82b5ae17cd5f3d5c529bd97d16f686d0000000000000000d6856ebb6089ace13cb4d8e5dccdb75bc2ab423d994b19d8 (0) NAS-Identifier = "MikroTik" (0) NAS-IP-Address = 192.168.122.30
The packet has Framed-Protocol, but no Framed-IP-Address. The rest of the debug output shows that it's writing Framed-Protocol=PPP to SQL. And then no value for Framed-IP-Address. That's correct. So... what's the problem? Do you want a value written for Framed-IP-Address? If so, how does FreeRADIUS write a value that it doesn't have? Alan DeKok.