Hi Alan,
If only there was a way for you to post the debug output to the list, so RADIUS experts could look at it...
Below debug connections. Some lines were omitted from the debug log so that the message is not too large (more than 2500 lines) ... <Output omitted> ... radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server radius01 { ipaddr = [ip_radius_01] port = 1812 type = "auth+acct" secret = "secret1" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server radius02 { ipaddr = [ip_radius_02] port = 1812 type = "auth+acct" secret = "secret1" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server_pool mypool { type = fail-over home_server = radius01 home_server = radius02 } home_server_pool mypool { type = fail-over home_server = radius01 home_server = radius02 } realm DEFAULT { auth_pool = mypool acct_pool = mypool nostrip } radiusd: #### Loading Clients #### client [ip_radius_01] { ipaddr = [ip_radius_01] require_message_authenticator = no secret = "secret1" shortname = "SRV01" nastype = "other" } client [ip_radius_02] { ipaddr = [ip_radius_02] require_message_authenticator = no secret = "secret1" shortname = "SRV02" nastype = "other" } client [ip_NAS] { ipaddr = [ip_NAS] require_message_authenticator = no secret = "test123" shortname = "myNAS" nastype = "other" } ... <Output omitted> ... ################################################################ # FIRST USER LOGIN ################################################################ rad_recv: Access-Request packet from host [ip_NAS] port 59220, id=153, length=182 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x021500130135303832323639407573702e6272 Message-Authenticator = 0xd0df550f23b1aa9498c5dcc605a9678e # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = " myuser@mydomain.com" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user myuser to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] = updated [eap] Request is supposed to be proxied to Realm DEFAULT. Not doing EAP. ++[eap] = noop [files] users: Matched entry DEFAULT at line 204 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = noop +} # group authorize = updated WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 119 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x021500130135303832323639407573702e6272 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313533 Proxying request 0 to home server [ip_radius_01] port 1812 Sending Access-Request of id 119 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x021500130135303832323639407573702e6272 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313533 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host [ip_radius_01] port 1812, id=119, length=69 EAP-Message = 0x011600061520 Message-Authenticator = 0xa2e85f83200e0de34fc18aba49cd83e3 State = 0x201f7da6200968a5f97c5846fd9a034b Proxy-State = 0x313533 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +group post-proxy { [eap] No pre-existing handler found ++[eap] = noop +} # group post-proxy = noop Sending Access-Challenge of id 153 to [ip_NAS] port 59220 EAP-Message = 0x011600061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x201f7da6200968a5f97c5846fd9a034b Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host [ip_NAS] port 59220, id=154, length=385 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = <Output omitted> State = 0x201f7da6200968a5f97c5846fd9a034b Message-Authenticator = 0x12e4b5407220c5d51627bb2339eb4936 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = " myuser@mydomain.com" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user myuser to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] = updated [eap] Request is supposed to be proxied to Realm DEFAULT. Not doing EAP. ++[eap] = noop [files] users: Matched entry DEFAULT at line 204 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = noop +} # group authorize = updated WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 15 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = <Output omitted> State = 0x201f7da6200968a5f97c5846fd9a034b Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313534 Proxying request 1 to home server [ip_radius_01] port 1812 Sending Access-Request of id 15 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = <Output omitted> State = 0x201f7da6200968a5f97c5846fd9a034b Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313534 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host [ip_radius_01] port 1812, id=15, length=1095 EAP-Message = <Output omitted> EAP-Message = 0x660f3f196040ba4990067ed0 Message-Authenticator = 0xed9c41c40b319ddd2aab059a06b5fd13 State = 0x201f7da6210868a5f97c5846fd9a034b Proxy-State = 0x313534 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +group post-proxy { [eap] No pre-existing handler found ++[eap] = noop +} # group post-proxy = noop Sending Access-Challenge of id 154 to [ip_NAS] port 59220 EAP-Message =<Output omitted> EAP-Message = 0x660f3f196040ba4990067ed0 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x201f7da6210868a5f97c5846fd9a034b Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host [ip_NAS] port 59220, id=155, length=187 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x021700061500 State = 0x201f7da6210868a5f97c5846fd9a034b Message-Authenticator = 0x7ac5a8791fa719ddb3849c4bf1bb168c # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = " myuser@mydomain.com" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user myuser to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] = updated [eap] Request is supposed to be proxied to Realm DEFAULT. Not doing EAP. ++[eap] = noop [files] users: Matched entry DEFAULT at line 204 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = noop +} # group authorize = updated WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 226 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x021700061500 State = 0x201f7da6210868a5f97c5846fd9a034b Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313535 Proxying request 2 to home server [ip_radius_01] port 1812 Sending Access-Request of id 226 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x021700061500 State = 0x201f7da6210868a5f97c5846fd9a034b Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313535 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host [ip_radius_01] port 1812, id=226, length=1095 EAP-Message =<Output omitted> EAP-Message = 0x20414231263024060355040b Message-Authenticator = 0xf26d40987bfec390a04a0b08728501a0 State = 0x201f7da6220768a5f97c5846fd9a034b Proxy-State = 0x313535 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +group post-proxy { [eap] No pre-existing handler found ++[eap] = noop +} # group post-proxy = noop Sending Access-Challenge of id 155 to [ip_NAS] port 59220 EAP-Message = <Output omitted> EAP-Message = 0x20414231263024060355040b Message-Authenticator = 0x00000000000000000000000000000000 State = 0x201f7da6220768a5f97c5846fd9a034b Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host [ip_NAS] port 59220, id=156, length=187 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x021800061500 State = 0x201f7da6220768a5f97c5846fd9a034b Message-Authenticator = 0xc0bfe1d6824a5e8511a74512065e197c # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = " myuser@mydomain.com" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user myuser to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] = updated [eap] Request is supposed to be proxied to Realm DEFAULT. Not doing EAP. ++[eap] = noop [files] users: Matched entry DEFAULT at line 204 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = noop +} # group authorize = updated WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 147 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x021800061500 State = 0x201f7da6220768a5f97c5846fd9a034b Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313536 Proxying request 3 to home server [ip_radius_01] port 1812 Sending Access-Request of id 147 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x021800061500 State = 0x201f7da6220768a5f97c5846fd9a034b Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313536 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host [ip_radius_01] port 1812, id=147, length=1095 EAP-Message = <Output omitted> EAP-Message = 0x8bcda149294c2ff9d0958cc8 Message-Authenticator = 0x6e142e623da07926c48c5ab0567e72d6 State = 0x201f7da6230668a5f97c5846fd9a034b Proxy-State = 0x313536 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +group post-proxy { [eap] No pre-existing handler found ++[eap] = noop +} # group post-proxy = noop Sending Access-Challenge of id 156 to [ip_NAS] port 59220 EAP-Message = <Output omitted> EAP-Message = 0x8bcda149294c2ff9d0958cc8 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x201f7da6230668a5f97c5846fd9a034b Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host [ip_NAS] port 59220, id=157, length=187 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x021900061500 State = 0x201f7da6230668a5f97c5846fd9a034b Message-Authenticator = 0xf45d59fd209482e5c51dafda39d8a5f2 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = " myuser@mydomain.com" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user myuser to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] = updated [eap] Request is supposed to be proxied to Realm DEFAULT. Not doing EAP. ++[eap] = noop [files] users: Matched entry DEFAULT at line 204 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = noop +} # group authorize = updated WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 82 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x021900061500 State = 0x201f7da6230668a5f97c5846fd9a034b Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313537 Proxying request 4 to home server [ip_radius_01] port 1812 Sending Access-Request of id 82 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x021900061500 State = 0x201f7da6230668a5f97c5846fd9a034b Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313537 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host [ip_radius_01] port 1812, id=82, length=1095 EAP-Message = <Output omitted> EAP-Message = 0x00b09be08525c2d623e20f96 Message-Authenticator = 0x580de3b56b8e139e4792d3eb7ac8b2bb State = 0x201f7da6240568a5f97c5846fd9a034b Proxy-State = 0x313537 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +group post-proxy { [eap] No pre-existing handler found ++[eap] = noop +} # group post-proxy = noop Sending Access-Challenge of id 157 to [ip_NAS] port 59220 EAP-Message = <Output omitted> Message-Authenticator = 0x00000000000000000000000000000000 State = 0x201f7da6240568a5f97c5846fd9a034b Finished request 4. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host [ip_NAS] port 59220, id=158, length=187 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x021a00061500 State = 0x201f7da6240568a5f97c5846fd9a034b Message-Authenticator = 0x6cd3abde5e854cbb6700dc1119bab908 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = " myuser@mydomain.com" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user myuser to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] = updated [eap] Request is supposed to be proxied to Realm DEFAULT. Not doing EAP. ++[eap] = noop [files] users: Matched entry DEFAULT at line 204 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = noop +} # group authorize = updated WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 131 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x021a00061500 State = 0x201f7da6240568a5f97c5846fd9a034b Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313538 Proxying request 5 to home server [ip_radius_01] port 1812 Sending Access-Request of id 131 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x021a00061500 State = 0x201f7da6240568a5f97c5846fd9a034b Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313538 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host [ip_radius_01] port 1812, id=131, length=925 EAP-Message = <Output omitted> Message-Authenticator = 0xcf9c08bd57de523e89986480d3be4bc4 State = 0x201f7da6250468a5f97c5846fd9a034b Proxy-State = 0x313538 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +group post-proxy { [eap] No pre-existing handler found ++[eap] = noop +} # group post-proxy = noop Sending Access-Challenge of id 158 to [ip_NAS] port 59220 EAP-Message = <Output omitted> Message-Authenticator = 0x00000000000000000000000000000000 State = 0x201f7da6250468a5f97c5846fd9a034b Finished request 5. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host [ip_NAS] port 59220, id=159, length=321 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = <Output omitted> State = 0x201f7da6250468a5f97c5846fd9a034b Message-Authenticator = 0x7cdd8f3d8cabfcaec6f574624484b2a3 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = " myuser@mydomain.com" [suffix] Found realm "DEFAULT" [suffix] Proxying request from user myuser to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] = updated [eap] Request is supposed to be proxied to Realm DEFAULT. Not doing EAP. ++[eap] = noop [files] users: Matched entry DEFAULT at line 204 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = noop +} # group authorize = updated WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 111 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = <Output omitted> State = 0x201f7da6250468a5f97c5846fd9a034b Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313539 Proxying request 6 to home server [ip_radius_01] port 1812 Sending Access-Request of id 111 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = <Output omitted> State = 0x201f7da6250468a5f97c5846fd9a034b Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313539 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host [ip_radius_01] port 1812, id=111, length=132 EAP-Message = 0x011c004515800000003b1403010001011603010030723be3902ecf2baa9cd0ef467d641d8c314381b2f009489be0d5160ffb706c71cce9ea38ac5c4adc5ddd040a543beb47 Message-Authenticator = 0x96076645b9d9f2b5b134115053b1dad8 State = 0x201f7da6260368a5f97c5846fd9a034b Proxy-State = 0x313539 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +group post-proxy { [eap] No pre-existing handler found ++[eap] = noop +} # group post-proxy = noop Sending Access-Challenge of id 159 to [ip_NAS] port 59220 EAP-Message = 0x011c004515800000003b1403010001011603010030723be3902ecf2baa9cd0ef467d641d8c314381b2f009489be0d5160ffb706c71cce9ea38ac5c4adc5ddd040a543beb47 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x201f7da6260368a5f97c5846fd9a034b Finished request 6. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host [ip_NAS] port 59220, id=160, length=336 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = <Output omitted> Message-Authenticator = 0x0c0b11eeeea33d77c9333ebf6680da24 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = " myuser@mydomain.com" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user myuser to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] = updated [eap] Request is supposed to be proxied to Realm DEFAULT. Not doing EAP. ++[eap] = noop [files] users: Matched entry DEFAULT at line 204 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = noop +} # group authorize = updated WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 76 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = <Output omitted> Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313630 Proxying request 7 to home server [ip_radius_01] port 1812 Sending Access-Request of id 76 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = <Output omitted> Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313630 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host [ip_radius_01] port 1812, id=76, length=158 EAP-Message = <Output omitted> State = 0x201f7da6270268a5f97c5846fd9a034b Proxy-State = 0x313630 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +group post-proxy { [eap] No pre-existing handler found ++[eap] = noop +} # group post-proxy = noop Sending Access-Challenge of id 160 to [ip_NAS] port 59220 EAP-Message = <Output omitted> State = 0x201f7da6270268a5f97c5846fd9a034b Finished request 7. Going to the next request Waking up in 4.6 seconds. rad_recv: Access-Request packet from host [ip_NAS] port 59220, id=161, length=187 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x021d00061500 State = 0x201f7da6270268a5f97c5846fd9a034b Message-Authenticator = 0x657b8c4a21b355c126e88584b6c32787 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = " myuser@mydomain.com" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user myuser to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] = updated [eap] Request is supposed to be proxied to Realm DEFAULT. Not doing EAP. ++[eap] = noop [files] users: Matched entry DEFAULT at line 204 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = noop +} # group authorize = updated WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 242 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x021d00061500 State = 0x201f7da6270268a5f97c5846fd9a034b Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313631 Proxying request 8 to home server [ip_radius_01] port 1812 Sending Access-Request of id 242 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x021d00061500 State = 0x201f7da6270268a5f97c5846fd9a034b Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313631 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Accept packet from host [ip_radius_01] port 1812, id=242, length=174 MS-MPPE-Recv-Key = 0x858103345443f361eb9c205868c096e647df3aa3d7588efd4abf2e16394b170e MS-MPPE-Send-Key = 0xb11578e2cc89ad415d5ef302fd522dbe3fdeaef34dde7f5b28e91d393292d9aa EAP-Message = 0x031d0004 Message-Authenticator = 0x49fb672f0d64cfa77c7005b645b5c859 User-Name = "myuser" Proxy-State = 0x313631 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +group post-proxy { [eap] No pre-existing handler found ++[eap] = noop +} # group post-proxy = noop Found Auth-Type = Accept Auth-Type = Accept, accepting the user # Executing section session from file /etc/freeradius/sites-enabled/default +group session { [radutmp] expand: /var/log/freeradius/radutmp -> /var/log/freeradius/radutmp [radutmp] expand: %{User-Name} -> myuser@mydomain.com ++[radutmp] = ok +} # group session = ok Login OK: [myuser@mydomain.com] (from client myNAS port 0 cli 34-BB-26-C2-1D-60) # Executing section post-auth from file /etc/freeradius/sites-enabled/default +group post-auth { ++[exec] = noop +} # group post-auth = noop Sending Access-Accept of id 161 to [ip_NAS] port 59220 MS-MPPE-Recv-Key = 0x858103345443f361eb9c205868c096e647df3aa3d7588efd4abf2e16394b170e MS-MPPE-Send-Key = 0xb11578e2cc89ad415d5ef302fd522dbe3fdeaef34dde7f5b28e91d393292d9aa EAP-Message = 0x031d0004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "myuser" Finished request 8. Going to the next request Waking up in 4.6 seconds. rad_recv: Accounting-Request packet from host [ip_NAS] port 45843, id=162, length=161 Acct-Session-Id = "000000BE-00000058" Acct-Status-Type = Start Acct-Authentic = RADIUS User-Name = "myuser" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" # Executing section preacct from file /etc/freeradius/sites-enabled/default +group preacct { ++[preprocess] = ok [acct_unique] Hashing 'NAS-Port = 0,NAS-Identifier = "24a43cb0fbad",NAS-IP-Address = 172.19.13.15,Acct-Session-Id = "000000BE-00000058",User-Name = "myuser"' [acct_unique] Acct-Unique-Session-ID = "86294e67140c8981". ++[acct_unique] = ok [suffix] No '@' in User-Name = "myuser", looking up realm NULL [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user myuser to realm DEFAULT [suffix] Preparing to proxy accounting request to realm "DEFAULT" ++[suffix] = updated ++[files] = noop +} # group preacct = updated # Executing section accounting from file /etc/freeradius/sites-enabled/default +group accounting { [detail] expand: %{Packet-Src-IP-Address} -> [ip_NAS] [detail] expand: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d -> /var/log/freeradius/radacct/[ip_NAS]/detail-20150521 [detail] /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/freeradius/radacct/[ip_NAS]/detail-20150521 [detail] expand: %t -> Thu May 21 08:34:04 2015 ++[detail] = ok [radutmp] expand: /var/log/freeradius/radutmp -> /var/log/freeradius/radutmp [radutmp] expand: %{User-Name} -> myuser ++[radutmp] = ok [sql] expand: %{User-Name} -> myuser [sql] sql_set_user escaped user --> 'myuser' [sql] expand: %{Acct-Delay-Time} -> [sql] ... expanding second conditional [sql] expand: INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', rlm_sql (sql): Reserving sql socket id: 31 rlm_sql (sql): Released sql socket id: 31 ++[sql] = ok ++[exec] = noop [attr_filter.accounting_response] expand: %{User-Name} -> myuser attr_filter: Matched entry DEFAULT at line 12 ++[attr_filter.accounting_response] = updated +} # group accounting = updated WARNING: Empty pre-proxy section. Using default return values. Sending Accounting-Request of id 138 to [ip_radius_01] port 1813 Acct-Session-Id = "000000BE-00000058" Acct-Status-Type = Start Acct-Authentic = RADIUS User-Name = "myuser" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" Proxy-State = 0x313632 Proxying request 9 to home server [ip_radius_01] port 1813 Sending Accounting-Request of id 138 to [ip_radius_01] port 1813 Acct-Session-Id = "000000BE-00000058" Acct-Status-Type = Start Acct-Authentic = RADIUS User-Name = "myuser" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "24-A4-3C-B2-FB-AD:myssid" Calling-Station-Id = "34-BB-26-C2-1D-60" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" Proxy-State = 0x313632 Going to the next request Waking up in 0.9 seconds. rad_recv: Accounting-Response packet from host [ip_radius_01] port 1813, id=138, length=25 Proxy-State = 0x313632 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +group post-proxy { [eap] No pre-existing handler found ++[eap] = noop +} # group post-proxy = noop Sending Accounting-Response of id 162 to [ip_NAS] port 45843 Finished request 9. Cleaning up request 9 ID 162 with timestamp +15 Going to the next request Waking up in 4.4 seconds. Cleaning up request 0 ID 153 with timestamp +15 Waking up in 0.1 seconds. Ready to process requests. ################################################################ # SECOND USER LOGIN ################################################################ rad_recv: Access-Request packet from host [ip_NAS] port 42468, id=109, length=182 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020000130135303832323639407573702e6272 Message-Authenticator = 0xc068d5e019ec753d46a63b3c79ebef97 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = " myuser@mydomain.com" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user myuser to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] = updated [eap] Request is supposed to be proxied to Realm DEFAULT. Not doing EAP. ++[eap] = noop [files] users: Matched entry DEFAULT at line 204 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = noop +} # group authorize = updated WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 84 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020000130135303832323639407573702e6272 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313039 Proxying request 10 to home server [ip_radius_01] port 1812 Sending Access-Request of id 84 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020000130135303832323639407573702e6272 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313039 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host [ip_radius_01] port 1812, id=84, length=69 EAP-Message = 0x010100061520 Message-Authenticator = 0x7af1e1f0bc6312b7a368266f31fb2edb State = 0x8e7884238e7991d76d10c73c6b41fbdf Proxy-State = 0x313039 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +group post-proxy { [eap] No pre-existing handler found ++[eap] = noop +} # group post-proxy = noop Sending Access-Challenge of id 109 to [ip_NAS] port 42468 EAP-Message = 0x010100061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8e7884238e7991d76d10c73c6b41fbdf Finished request 10. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host [ip_NAS] port 42468, id=110, length=187 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020100060319 State = 0x8e7884238e7991d76d10c73c6b41fbdf Message-Authenticator = 0xa4b25b6748408b25b6fd2ed0764814e0 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = " myuser@mydomain.com" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user myuser to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] = updated [eap] Request is supposed to be proxied to Realm DEFAULT. Not doing EAP. ++[eap] = noop [files] users: Matched entry DEFAULT at line 204 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = noop +} # group authorize = updated WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 254 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020100060319 State = 0x8e7884238e7991d76d10c73c6b41fbdf Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313130 Proxying request 11 to home server [ip_radius_01] port 1812 Sending Access-Request of id 254 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020100060319 State = 0x8e7884238e7991d76d10c73c6b41fbdf Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313130 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host [ip_radius_01] port 1812, id=254, length=69 EAP-Message = 0x010200061920 Message-Authenticator = 0xabb5045ca37f892bbc384c20a180fb00 State = 0x8e7884238f7a9dd76d10c73c6b41fbdf Proxy-State = 0x313130 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +group post-proxy { [eap] No pre-existing handler found ++[eap] = noop +} # group post-proxy = noop Sending Access-Challenge of id 110 to [ip_NAS] port 42468 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8e7884238f7a9dd76d10c73c6b41fbdf Finished request 11. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host [ip_NAS] port 42468, id=111, length=288 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = <Output omitted> State = 0x8e7884238f7a9dd76d10c73c6b41fbdf Message-Authenticator = 0x1eeb00247d5e524256419593a50c4cea # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = " myuser@mydomain.com" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user myuser to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] = updated [eap] Request is supposed to be proxied to Realm DEFAULT. Not doing EAP. ++[eap] = noop [files] users: Matched entry DEFAULT at line 204 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = noop +} # group authorize = updated WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 12 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = <Output omitted> State = 0x8e7884238f7a9dd76d10c73c6b41fbdf Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313131 Proxying request 12 to home server [ip_radius_01] port 1812 Sending Access-Request of id 12 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = <Output omitted> State = 0x8e7884238f7a9dd76d10c73c6b41fbdf Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313131 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host [ip_radius_01] port 1812, id=12, length=1095 EAP-Message = <Output omitted> EAP-Message = 0x660f3f196040ba4990067ed0 Message-Authenticator = 0x7dbcca2afa4b0bed08c95ebd9cf40c5c State = 0x8e7884238c7b9dd76d10c73c6b41fbdf Proxy-State = 0x313131 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +group post-proxy { [eap] No pre-existing handler found ++[eap] = noop +} # group post-proxy = noop Sending Access-Challenge of id 111 to [ip_NAS] port 42468 EAP-Message = <Output omitted> EAP-Message = 0x660f3f196040ba4990067ed0 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8e7884238c7b9dd76d10c73c6b41fbdf Finished request 12. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host [ip_NAS] port 42468, id=112, length=187 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020300061900 State = 0x8e7884238c7b9dd76d10c73c6b41fbdf Message-Authenticator = 0x750761102d17ac43c6c1d651b1caa667 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = " myuser@mydomain.com" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user myuser to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] = updated [eap] Request is supposed to be proxied to Realm DEFAULT. Not doing EAP. ++[eap] = noop [files] users: Matched entry DEFAULT at line 204 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = noop +} # group authorize = updated WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 92 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020300061900 State = 0x8e7884238c7b9dd76d10c73c6b41fbdf Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313132 Proxying request 13 to home server [ip_radius_01] port 1812 Sending Access-Request of id 92 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020300061900 State = 0x8e7884238c7b9dd76d10c73c6b41fbdf Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313132 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host [ip_radius_01] port 1812, id=92, length=1091 EAP-Message = <Output omitted> EAP-Message = 0x263024060355040b Message-Authenticator = 0x6c17b91c2ae244541083eea89639b571 State = 0x8e7884238d7c9dd76d10c73c6b41fbdf Proxy-State = 0x313132 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +group post-proxy { [eap] No pre-existing handler found ++[eap] = noop +} # group post-proxy = noop Sending Access-Challenge of id 112 to [ip_NAS] port 42468 EAP-Message = <Output omitted> EAP-Message = 0x263024060355040b Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8e7884238d7c9dd76d10c73c6b41fbdf Finished request 13. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host [ip_NAS] port 42468, id=113, length=187 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020400061900 State = 0x8e7884238d7c9dd76d10c73c6b41fbdf Message-Authenticator = 0xe0d4be98195747e437329d28ebfdded2 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = " myuser@mydomain.com" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user myuser to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] = updated [eap] Request is supposed to be proxied to Realm DEFAULT. Not doing EAP. ++[eap] = noop [files] users: Matched entry DEFAULT at line 204 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = noop +} # group authorize = updated WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 10 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020400061900 State = 0x8e7884238d7c9dd76d10c73c6b41fbdf Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313133 Proxying request 14 to home server [ip_radius_01] port 1812 Sending Access-Request of id 10 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020400061900 State = 0x8e7884238d7c9dd76d10c73c6b41fbdf Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313133 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host [ip_radius_01] port 1812, id=10, length=1091 EAP-Message = <Output omitted> EAP-Message = 0x294c2ff9d0958cc8 Message-Authenticator = 0x2995a0d870f9ad142791481b1e7b6eb3 State = 0x8e7884238a7d9dd76d10c73c6b41fbdf Proxy-State = 0x313133 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +group post-proxy { [eap] No pre-existing handler found ++[eap] = noop +} # group post-proxy = noop Sending Access-Challenge of id 113 to [ip_NAS] port 42468 EAP-Message = <Output omitted> EAP-Message = 0x294c2ff9d0958cc8 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8e7884238a7d9dd76d10c73c6b41fbdf Finished request 14. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host [ip_NAS] port 42468, id=114, length=187 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020500061900 State = 0x8e7884238a7d9dd76d10c73c6b41fbdf Message-Authenticator = 0x454bc2db4392419a09b57ad3bcf9e412 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = " myuser@mydomain.com" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user myuser to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] = updated [eap] Request is supposed to be proxied to Realm DEFAULT. Not doing EAP. ++[eap] = noop [files] users: Matched entry DEFAULT at line 204 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = noop +} # group authorize = updated WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 34 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020500061900 State = 0x8e7884238a7d9dd76d10c73c6b41fbdf Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313134 Proxying request 15 to home server [ip_radius_01] port 1812 Sending Access-Request of id 34 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020500061900 State = 0x8e7884238a7d9dd76d10c73c6b41fbdf Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313134 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host [ip_radius_01] port 1812, id=34, length=1091 EAP-Message = <Output omitted> EAP-Message = 0x8525c2d623e20f96 Message-Authenticator = 0x7eeb6ae0c47ee89f467895b459b5cec1 State = 0x8e7884238b7e9dd76d10c73c6b41fbdf Proxy-State = 0x313134 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +group post-proxy { [eap] No pre-existing handler found ++[eap] = noop +} # group post-proxy = noop Sending Access-Challenge of id 114 to [ip_NAS] port 42468 EAP-Message = <Output omitted> EAP-Message = 0x8525c2d623e20f96 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8e7884238b7e9dd76d10c73c6b41fbdf Finished request 15. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host [ip_NAS] port 42468, id=115, length=187 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020600061900 State = 0x8e7884238b7e9dd76d10c73c6b41fbdf Message-Authenticator = 0x66a36e121110d158b886d3e196d03f80 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = " myuser@mydomain.com" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user myuser to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] = updated [eap] Request is supposed to be proxied to Realm DEFAULT. Not doing EAP. ++[eap] = noop [files] users: Matched entry DEFAULT at line 204 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = noop +} # group authorize = updated WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 113 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020600061900 State = 0x8e7884238b7e9dd76d10c73c6b41fbdf Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313135 Proxying request 16 to home server [ip_radius_01] port 1812 Sending Access-Request of id 113 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020600061900 State = 0x8e7884238b7e9dd76d10c73c6b41fbdf Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313135 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host [ip_radius_01] port 1812, id=113, length=921 EAP-Message = <Output omitted> Message-Authenticator = 0xf0158737867af3def5765d279a8b2159 State = 0x8e788423887f9dd76d10c73c6b41fbdf Proxy-State = 0x313135 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +group post-proxy { [eap] No pre-existing handler found ++[eap] = noop +} # group post-proxy = noop Sending Access-Challenge of id 115 to [ip_NAS] port 42468 EAP-Message = <Output omitted> Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8e788423887f9dd76d10c73c6b41fbdf Finished request 16. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host [ip_NAS] port 42468, id=116, length=325 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = <Output omitted> Message-Authenticator = 0xd80a3ce16def6146568b87745a1566d3 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = " myuser@mydomain.com" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user myuser to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] = updated [eap] Request is supposed to be proxied to Realm DEFAULT. Not doing EAP. ++[eap] = noop [files] users: Matched entry DEFAULT at line 204 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = noop +} # group authorize = updated WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 147 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = <Output omitted> State = 0x8e788423887f9dd76d10c73c6b41fbdf Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313136 Proxying request 17 to home server [ip_radius_01] port 1812 Sending Access-Request of id 147 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = <Output omitted> Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313136 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host [ip_radius_01] port 1812, id=147, length=128 EAP-Message = 0x0108004119001403010001011603010030093cc20bda969a661ce67a08272c39e474f3088bd2f10450b83ab561f40b443779c2dbf54334aab49cb8510086271fce Message-Authenticator = 0x61b05e4260bcb12ebd2735ad37921384 State = 0x8e78842389709dd76d10c73c6b41fbdf Proxy-State = 0x313136 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +group post-proxy { [eap] No pre-existing handler found ++[eap] = noop +} # group post-proxy = noop Sending Access-Challenge of id 116 to [ip_NAS] port 42468 EAP-Message = 0x0108004119001403010001011603010030093cc20bda969a661ce67a08272c39e474f3088bd2f10450b83ab561f40b443779c2dbf54334aab49cb8510086271fce Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8e78842389709dd76d10c73c6b41fbdf Finished request 17. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host [ip_NAS] port 42468, id=117, length=187 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020800061900 State = 0x8e78842389709dd76d10c73c6b41fbdf Message-Authenticator = 0x5e5ca34f27409565877dcd44dc1316c7 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = " myuser@mydomain.com" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user myuser to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] = updated [eap] Request is supposed to be proxied to Realm DEFAULT. Not doing EAP. ++[eap] = noop [files] users: Matched entry DEFAULT at line 204 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = noop +} # group authorize = updated WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 192 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020800061900 State = 0x8e78842389709dd76d10c73c6b41fbdf Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313137 Proxying request 18 to home server [ip_radius_01] port 1812 Sending Access-Request of id 192 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020800061900 State = 0x8e78842389709dd76d10c73c6b41fbdf Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313137 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host [ip_radius_01] port 1812, id=192, length=106 EAP-Message = 0x0109002b190017030100207b4dc4fa412872e8d7b2076c8c55fbf6a58938937f247958e67e8b8c484b5775 Message-Authenticator = 0x709fa275a06cb6742d5c938ac490db1e State = 0x8e78842386719dd76d10c73c6b41fbdf Proxy-State = 0x313137 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +group post-proxy { [eap] No pre-existing handler found ++[eap] = noop +} # group post-proxy = noop Sending Access-Challenge of id 117 to [ip_NAS] port 42468 EAP-Message = 0x0109002b190017030100207b4dc4fa412872e8d7b2076c8c55fbf6a58938937f247958e67e8b8c484b5775 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8e78842386719dd76d10c73c6b41fbdf Finished request 18. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host [ip_NAS] port 42468, id=118, length=240 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x0209003b19001703010030aad6147f17ce8d8b41e02553217a281e29bb6c02594c0e44fd1eb25f7d67f2a2ac1884246a05606b86c16053bff9653e State = 0x8e78842386719dd76d10c73c6b41fbdf Message-Authenticator = 0x203c9c6460539af58e6b0bfd12803c96 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = " myuser@mydomain.com" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user myuser to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] = updated [eap] Request is supposed to be proxied to Realm DEFAULT. Not doing EAP. ++[eap] = noop [files] users: Matched entry DEFAULT at line 204 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = noop +} # group authorize = updated WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 27 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x0209003b19001703010030aad6147f17ce8d8b41e02553217a281e29bb6c02594c0e44fd1eb25f7d67f2a2ac1884246a05606b86c16053bff9653e State = 0x8e78842386719dd76d10c73c6b41fbdf Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313138 Proxying request 19 to home server [ip_radius_01] port 1812 Sending Access-Request of id 27 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x0209003b19001703010030aad6147f17ce8d8b41e02553217a281e29bb6c02594c0e44fd1eb25f7d67f2a2ac1884246a05606b86c16053bff9653e State = 0x8e78842386719dd76d10c73c6b41fbdf Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313138 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host [ip_radius_01] port 1812, id=27, length=138 EAP-Message = 0x010a004b190017030100401827fc0012571fdede808d51fdc59e5c1efcf1ab909027d316253b2ffb47708821cb2d30ff54870a002b79bf00f8ccc2dc060742f64fc2c129dd3e75a0632e6c Message-Authenticator = 0x0f4fbabd386e801d1a75e9fd4282fea2 State = 0x8e78842387729dd76d10c73c6b41fbdf Proxy-State = 0x313138 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +group post-proxy { [eap] No pre-existing handler found ++[eap] = noop +} # group post-proxy = noop Sending Access-Challenge of id 118 to [ip_NAS] port 42468 EAP-Message = 0x010a004b190017030100401827fc0012571fdede808d51fdc59e5c1efcf1ab909027d316253b2ffb47708821cb2d30ff54870a002b79bf00f8ccc2dc060742f64fc2c129dd3e75a0632e6c Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8e78842387729dd76d10c73c6b41fbdf Finished request 19. Going to the next request Waking up in 4.7 seconds. rad_recv: Access-Request packet from host [ip_NAS] port 42468, id=119, length=288 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = <Output omitted> State = 0x8e78842387729dd76d10c73c6b41fbdf Message-Authenticator = 0xae9db27cb88e4993d09a9d66c7e1bae0 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = " myuser@mydomain.com" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user myuser to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] = updated [eap] Request is supposed to be proxied to Realm DEFAULT. Not doing EAP. ++[eap] = noop [files] users: Matched entry DEFAULT at line 204 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = noop +} # group authorize = updated WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 129 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = <Output omitted> State = 0x8e78842387729dd76d10c73c6b41fbdf Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313139 Proxying request 20 to home server [ip_radius_01] port 1812 Sending Access-Request of id 129 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = <Output omitted> State = 0x8e78842387729dd76d10c73c6b41fbdf Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313139 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host [ip_radius_01] port 1812, id=129, length=154 EAP-Message = 0x010b005b1900170301005058ce7dbe42b7612bcaf08ead7cf1fc10827aa41d41affc784ee5f2094c1c56bf129a542eaf834a5a3f3030b902d82e89b07ac5a0e0e3186c0e43089837f2a1ca7864cf00c093c45b05254813f49276a6 Message-Authenticator = 0x360b6e962949423163acb668c7c48b93 State = 0x8e78842384739dd76d10c73c6b41fbdf Proxy-State = 0x313139 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +group post-proxy { [eap] No pre-existing handler found ++[eap] = noop +} # group post-proxy = noop Sending Access-Challenge of id 119 to [ip_NAS] port 42468 EAP-Message = 0x010b005b1900170301005058ce7dbe42b7612bcaf08ead7cf1fc10827aa41d41affc784ee5f2094c1c56bf129a542eaf834a5a3f3030b902d82e89b07ac5a0e0e3186c0e43089837f2a1ca7864cf00c093c45b05254813f49276a6 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8e78842384739dd76d10c73c6b41fbdf Finished request 20. Going to the next request Waking up in 4.7 seconds. rad_recv: Access-Request packet from host [ip_NAS] port 42468, id=120, length=224 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020b002b1900170301002045b9268bfdbb41d1bd07f8e8c2484a9224628fd7e2e30e024b1a92b42b5fa408 State = 0x8e78842384739dd76d10c73c6b41fbdf Message-Authenticator = 0x71ffe364436eae8d5fbf65c5b2b980fe # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = " myuser@mydomain.com" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user myuser to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] = updated [eap] Request is supposed to be proxied to Realm DEFAULT. Not doing EAP. ++[eap] = noop [files] users: Matched entry DEFAULT at line 204 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = noop +} # group authorize = updated WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 185 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020b002b1900170301002045b9268bfdbb41d1bd07f8e8c2484a9224628fd7e2e30e024b1a92b42b5fa408 State = 0x8e78842384739dd76d10c73c6b41fbdf Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313230 Proxying request 21 to home server [ip_radius_01] port 1812 Sending Access-Request of id 185 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020b002b1900170301002045b9268bfdbb41d1bd07f8e8c2484a9224628fd7e2e30e024b1a92b42b5fa408 State = 0x8e78842384739dd76d10c73c6b41fbdf Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313230 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host [ip_radius_01] port 1812, id=185, length=106 EAP-Message = 0x010c002b190017030100205c7570e4f5e760f02d66144b48a20aae4501eafe10488259e453a8995bf487df Message-Authenticator = 0x6be6f449fe7e6889462711fd6ef60dbe State = 0x8e78842385749dd76d10c73c6b41fbdf Proxy-State = 0x313230 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +group post-proxy { [eap] No pre-existing handler found ++[eap] = noop +} # group post-proxy = noop Sending Access-Challenge of id 120 to [ip_NAS] port 42468 EAP-Message = 0x010c002b190017030100205c7570e4f5e760f02d66144b48a20aae4501eafe10488259e453a8995bf487df Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8e78842385749dd76d10c73c6b41fbdf Finished request 21. Going to the next request Waking up in 4.7 seconds. rad_recv: Access-Request packet from host [ip_NAS] port 42468, id=121, length=224 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020c002b190017030100203830445ef683ef7217a1c9e4c859d535b698222b8eb261b0fbfa642c2175472d State = 0x8e78842385749dd76d10c73c6b41fbdf Message-Authenticator = 0x0169515c639b38bcc8c220c8577d6a26 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = " myuser@mydomain.com" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user myuser to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] = updated [eap] Request is supposed to be proxied to Realm DEFAULT. Not doing EAP. ++[eap] = noop [files] users: Matched entry DEFAULT at line 204 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = noop +} # group authorize = updated WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 215 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020c002b190017030100203830445ef683ef7217a1c9e4c859d535b698222b8eb261b0fbfa642c2175472d State = 0x8e78842385749dd76d10c73c6b41fbdf Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313231 Proxying request 22 to home server [ip_radius_01] port 1812 Sending Access-Request of id 215 to [ip_radius_01] port 1812 User-Name = "myuser@mydomain.com" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x020c002b190017030100203830445ef683ef7217a1c9e4c859d535b698222b8eb261b0fbfa642c2175472d State = 0x8e78842385749dd76d10c73c6b41fbdf Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x313231 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Accept packet from host [ip_radius_01] port 1812, id=215, length=174 User-Name = "myuser" MS-MPPE-Recv-Key = 0x1f1eb2ed6cb44f07013077cd726be220eba04aabfb7ebdf04207aa92202f9284 MS-MPPE-Send-Key = 0x29cea404f71ee5c5227cd26453aaa34c546817ab9e8a623f00e378d24dfa91a4 EAP-Message = 0x030c0004 Message-Authenticator = 0xe2a0cd8c3df8f404418e9addbfe08259 Proxy-State = 0x313231 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +group post-proxy { [eap] No pre-existing handler found ++[eap] = noop +} # group post-proxy = noop Found Auth-Type = Accept Auth-Type = Accept, accepting the user # Executing section session from file /etc/freeradius/sites-enabled/default +group session { [radutmp] expand: /var/log/freeradius/radutmp -> /var/log/freeradius/radutmp [radutmp] expand: %{User-Name} -> myuser@mydomain.com ++[radutmp] = ok +} # group session = ok Login OK: [myuser@mydomain.com] (from client myNAS port 0 cli 68-94-23-92-31-83) # Executing section post-auth from file /etc/freeradius/sites-enabled/default +group post-auth { ++[exec] = noop +} # group post-auth = noop Sending Access-Accept of id 121 to [ip_NAS] port 42468 User-Name = "myuser" MS-MPPE-Recv-Key = 0x1f1eb2ed6cb44f07013077cd726be220eba04aabfb7ebdf04207aa92202f9284 MS-MPPE-Send-Key = 0x29cea404f71ee5c5227cd26453aaa34c546817ab9e8a623f00e378d24dfa91a4 EAP-Message = 0x030c0004 Message-Authenticator = 0x00000000000000000000000000000000 Finished request 22. Going to the next request Waking up in 4.7 seconds. rad_recv: Accounting-Request packet from host [ip_NAS] port 60419, id=122, length=161 Acct-Session-Id = "000000BD-00000009" Acct-Status-Type = Start Acct-Authentic = RADIUS User-Name = "myuser" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" # Executing section preacct from file /etc/freeradius/sites-enabled/default +group preacct { ++[preprocess] = ok [acct_unique] Hashing 'NAS-Port = 0,NAS-Identifier = "24a43cb0fbad",NAS-IP-Address = 172.19.13.15,Acct-Session-Id = "000000BD-00000009",User-Name = "myuser"' [acct_unique] Acct-Unique-Session-ID = "e40783ec483bfa72". ++[acct_unique] = ok [suffix] No '@' in User-Name = "myuser", looking up realm NULL [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user myuser to realm DEFAULT [suffix] Preparing to proxy accounting request to realm "DEFAULT" ++[suffix] = updated ++[files] = noop +} # group preacct = updated # Executing section accounting from file /etc/freeradius/sites-enabled/default +group accounting { [detail] expand: %{Packet-Src-IP-Address} -> [ip_NAS] [detail] expand: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d -> /var/log/freeradius/radacct/[ip_NAS]/detail-20150521 [detail] /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/freeradius/radacct/[ip_NAS]/detail-20150521 [detail] expand: %t -> Thu May 21 08:35:28 2015 ++[detail] = ok [radutmp] expand: /var/log/freeradius/radutmp -> /var/log/freeradius/radutmp [radutmp] expand: %{User-Name} -> myuser ++[radutmp] = ok [sql] expand: %{User-Name} -> myuser [sql] sql_set_user escaped user --> 'myuser' [sql] expand: %{Acct-Delay-Time} -> [sql] ... expanding second conditional [sql] expand: INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', rlm_sql (sql): Reserving sql socket id: 30 rlm_sql (sql): Released sql socket id: 30 ++[sql] = ok ++[exec] = noop [attr_filter.accounting_response] expand: %{User-Name} -> myuser attr_filter: Matched entry DEFAULT at line 12 ++[attr_filter.accounting_response] = updated +} # group accounting = updated WARNING: Empty pre-proxy section. Using default return values. Sending Accounting-Request of id 13 to [ip_radius_01] port 1813 Acct-Session-Id = "000000BD-00000009" Acct-Status-Type = Start Acct-Authentic = RADIUS User-Name = "myuser" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" Proxy-State = 0x313232 Proxying request 23 to home server [ip_radius_01] port 1813 Sending Accounting-Request of id 13 to [ip_radius_01] port 1813 Acct-Session-Id = "000000BD-00000009" Acct-Status-Type = Start Acct-Authentic = RADIUS User-Name = "myuser" NAS-IP-Address = 172.19.13.15 NAS-Identifier = "24a43cb0fbad" NAS-Port = 0 Called-Station-Id = "2A-A4-3C-B1-FB-AD:myssid" Calling-Station-Id = "68-94-23-92-31-83" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" Proxy-State = 0x313232 Going to the next request Waking up in 0.9 seconds. rad_recv: Accounting-Response packet from host [ip_radius_01] port 1813, id=13, length=25 Proxy-State = 0x313232 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +group post-proxy { [eap] No pre-existing handler found ++[eap] = noop +} # group post-proxy = noop Sending Accounting-Response of id 122 to [ip_NAS] port 60419 Finished request 23. Cleaning up request 23 ID 122 with timestamp +99 Going to the next request Waking up in 4.6 seconds. Cleaning up request 10 ID 109 with timestamp +99 Ready to process requests. #################################### End of degub log Thank you for your help! Best Regards, Renato L. Sousa