I probably resolv this problem with warning, but user login and is thrown in to vlan 200 and can't see where is problem. Below debug with login freeradius: FreeRADIUS Version 2.2.5, for host x86_64-pc-linux-gnu, built on Aug 10 2017 at 07:25:15 Copyright (C) 1999-2013 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License. For more information about these matters, see the file named COPYRIGHT. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/radrelay including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/rediswho including configuration file /etc/freeradius/modules/smsotp including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/replicate including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/redis including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/ntlm_auth including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/dhcp_sqlippool including configuration file /etc/freeradius/modules/dynamic_clients including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/soh including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/cache including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/otp including configuration file /etc/freeradius/modules/opendirectory including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/cui including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/default.orig main { user = "freerad" group = "freerad" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes allow_vulnerable_openssl = no } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server radius149.156.XXX { ipaddr = 149.156.XXX port = 1812 type = "auth" secret = "Cg" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 300 status_check_timeout = 4 } home_server radius149.156.XXX { ipaddr = 149.156.XXX port = 1812 type = "auth" secret = "diajWog" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 300 status_check_timeout = 4 } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 no_response_fail = no max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } realm NULL { } realm LOCAL { } realm mydomain.com { authhost = LOCAL accthost = LOCAL } home_server_pool CYFRONET_pool { type = fail-over home_server = radius149.156.XXXX } realm DEFAULT { auth_pool = CYFRONET_pool nostrip } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 netmask = 32 require_message_authenticator = no secret = "testing123" shortname = "localhost" nastype = "other" } client 10.24.100.41 { ipaddr = 10.24.100.41 netmask = 32 require_message_authenticator = no secret = "vFa3o" nastype = "cisco" } client 149.156.2.40 { require_message_authenticator = no secret = "CyirkOWog" nastype = "other" } client 149.156.2.66 { require_message_authenticator = no secret = "CyirkOiajWog" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/freeradius/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/freeradius/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { # from file ? modules { Module: Creating Auth-Type = digest Module: Creating Auth-Type = LDAP Module: Creating Post-Auth-Type = REJECT Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/freeradius/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/freeradius/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap mschap { use_mppe = no require_encryption = no require_strong = no with_ntdomain_hack = no ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{%{Stripped-User-Name}:-%{User-Name:-None}} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" allow_retry = yes } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/freeradius/modules/digest Module: Linked to module rlm_ldap Module: Instantiating module "ldap" from file /etc/freeradius/modules/ldap ldap { server = "ldap1.ijp.pan.local" port = 389 password = "rad--IJP--02" expect_password = yes identity = "cn=freeradius,ou=services,dc=ijp,dc=pan,dc=local" net_timeout = 1 timeout = 4 timelimit = 3 max_uses = 0 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "dc=ijp,dc=pan,dc=local" filter = "(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr_used_for_allow = yes chase_referrals = yes rebind = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{control:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{control:Ldap-UserDn})))" groupmembership_attribute = "memberOf" dictionary_mapping = "/etc/freeradius/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes edir_account_policy_check = no set_auth_type = yes keepalive { idle = 60 probes = 3 interval = 3 } } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /etc/freeradius/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id conns: 0x11ecd60 Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/freeradius/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 1024 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "si7ys4mxs984mxksj4oi" dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /etc/freeradius/huntgroups reading pairlist file /etc/freeradius/hints Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/freeradius/modules/files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } reading pairlist file /etc/freeradius/users reading pairlist file /etc/freeradius/acct_users reading pairlist file /etc/freeradius/preproxy_users Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/freeradius/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, NAS-Identifier, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/freeradius/modules/detail detail { detailfile = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/freeradius/modules/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/freeradius/attrs.accounting_response Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/freeradius/attrs.access_reject } # modules } # server server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } ... adding new socket proxy address * port 50221 ... adding new socket proxy address * port 60137 ... adding new socket proxy address * port 46071 Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 10.24.100.41 port 32773, id=82, length=287 User-Name = "psitarz@mydomain.com" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002bd759bbc17d" Acct-Session-Id = "59bbc17d/08:ed:b9:92:1e:85/512" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x02020017017073697461727a40696a702e70616e2e706c Message-Authenticator = 0x97a0cc60673521e307ecbc2c0bf94ea8 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz@mydomain.com" [suffix] Found realm "mydomain.com" [suffix] Adding Stripped-User-Name = "psitarz" [suffix] Adding Realm = "mydomain.com" [suffix] Authentication realm is LOCAL. ++[suffix] = ok [eap] EAP packet type response id 2 length 23 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated [files] users: Matched entry DEFAULT at line 12 ++[files] = ok [ldap] performing user authorization for psitarz [ldap] expand: %{Stripped-User-Name} -> psitarz [ldap] expand: (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) -> (sAMAccountName=psitarz) [ldap] expand: dc=ijp,dc=pan,dc=local -> dc=ijp,dc=pan,dc=local [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] attempting LDAP reconnection [ldap] (re)connect to ldap1.ijp.pan.local:389, authentication 0 [ldap] bind as cn=freeradius,ou=services,dc=ijp,dc=pan,dc=local/rad--IJP--02 to ldap1.ijp.pan.local:389 [ldap] waiting for bind result ... [ldap] Bind was successful [ldap] performing search in dc=ijp,dc=pan,dc=local, with filter (sAMAccountName=psitarz) [ldap] rebind to URL ldap://ijp.pan.local/CN=Configuration,DC=ijp,DC=pan,DC=local [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] ldap_release_conn: Release Id: 0 ++[ldap] = ok ++[expiration] = noop ++[logintime] = noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 82 to 10.24.100.41 port 32773 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 := "200" Reply-Message = "YYYY HIT: my_wifi" EAP-Message = 0x01030016041062751ceed5f67b3f6ccc82ce52a6b934 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3fe4315a3fe7357eafacb5cefacbc437 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.24.100.41 port 32773, id=83, length=288 User-Name = "psitarz@mydomain.com" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002bd759bbc17d" Acct-Session-Id = "59bbc17d/08:ed:b9:92:1e:85/512" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x020300060319 State = 0x3fe4315a3fe7357eafacb5cefacbc437 Message-Authenticator = 0x3215524e6fd6668c50be78586c01aa40 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz@mydomain.com" [suffix] Found realm "mydomain.com" [suffix] Adding Stripped-User-Name = "psitarz" [suffix] Adding Realm = "mydomain.com" [suffix] Authentication realm is LOCAL. ++[suffix] = ok [eap] EAP packet type response id 3 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated [files] users: Matched entry DEFAULT at line 12 ++[files] = ok [ldap] performing user authorization for psitarz [ldap] expand: %{Stripped-User-Name} -> psitarz [ldap] expand: (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) -> (sAMAccountName=psitarz) [ldap] expand: dc=ijp,dc=pan,dc=local -> dc=ijp,dc=pan,dc=local [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=ijp,dc=pan,dc=local, with filter (sAMAccountName=psitarz) [ldap] rebind to URL ldap://ijp.pan.local/CN=Configuration,DC=ijp,DC=pan,DC=local [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] ldap_release_conn: Release Id: 0 ++[ldap] = ok ++[expiration] = noop ++[logintime] = noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 83 to 10.24.100.41 port 32773 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 := "200" Reply-Message = "YYYY HIT: my_wifi" EAP-Message = 0x010400061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3fe4315a3ee0287eafacb5cefacbc437 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.24.100.41 port 32773, id=84, length=395 User-Name = "psitarz@mydomain.com" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002bd759bbc17d" Acct-Session-Id = "59bbc17d/08:ed:b9:92:1e:85/512" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x0204007119800000006716030100620100005e030159bbc248ee4ff5b91976f9c30f5010976c946b6019d6d396b03f265044a7401c00001cc014c013003900330035002fc00ac00900380032000a00130005000401000019000a0006000400170018000b0002010000170000ff01000100 State = 0x3fe4315a3ee0287eafacb5cefacbc437 Message-Authenticator = 0x25cc4806fb90fe2c1a2830eed4e2eb3d # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz@mydomain.com" [suffix] Found realm "mydomain.com" [suffix] Adding Stripped-User-Name = "psitarz" [suffix] Adding Realm = "mydomain.com" [suffix] Authentication realm is LOCAL. ++[suffix] = ok [eap] EAP packet type response id 4 length 113 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 103 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0062], ClientHello [peap] TLS_accept: unknown state [peap] >>> TLS 1.0 Handshake [length 0039], ServerHello [peap] TLS_accept: unknown state [peap] >>> TLS 1.0 Handshake [length 08a6], Certificate [peap] TLS_accept: unknown state [peap] >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange [peap] TLS_accept: unknown state [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: unknown state [peap] TLS_accept: unknown state [peap] TLS_accept: Need to read more data: unknown state In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 84 to 10.24.100.41 port 32773 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xaf5192d4e9d1c6301ce43d01 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3fe4315a3de1287eafacb5cefacbc437 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.24.100.41 port 32773, id=85, length=288 User-Name = "psitarz@mydomain.com" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002bd759bbc17d" Acct-Session-Id = "59bbc17d/08:ed:b9:92:1e:85/512" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x020500061900 State = 0x3fe4315a3de1287eafacb5cefacbc437 Message-Authenticator = 0xb4b69bc4a34358c3609bced928ea731b # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz@mydomain.com" [suffix] Found realm "mydomain.com" [suffix] Adding Stripped-User-Name = "psitarz" [suffix] Adding Realm = "mydomain.com" [suffix] Authentication realm is LOCAL. ++[suffix] = ok [eap] EAP packet type response id 5 length 6 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 85 to 10.24.100.41 port 32773 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x0382010100a7ba01 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3fe4315a3ce2287eafacb5cefacbc437 Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.24.100.41 port 32773, id=86, length=288 User-Name = "psitarz@mydomain.com" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002bd759bbc17d" Acct-Session-Id = "59bbc17d/08:ed:b9:92:1e:85/512" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x020600061900 State = 0x3fe4315a3ce2287eafacb5cefacbc437 Message-Authenticator = 0xff9a2950b66bd60bde4c54b19ebfa9b6 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz@mydomain.com" [suffix] Found realm "mydomain.com" [suffix] Adding Stripped-User-Name = "psitarz" [suffix] Adding Realm = "mydomain.com" [suffix] Authentication realm is LOCAL. ++[suffix] = ok [eap] EAP packet type response id 6 length 6 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 86 to 10.24.100.41 port 32773 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xb4df98894ce2f420149ab472bb1081bee581c522d103630c742681d332a2c1a343557e223eca39c9b2c24aa5040383ac12852199b595988ce57a58dbfb680df352d0fbfaf921bbfe6b54c014849638a1860def171e5efb4cb816030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3fe4315a3be3287eafacb5cefacbc437 Finished request 4. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.24.100.41 port 32773, id=87, length=426 User-Name = "psitarz@mydomain.com" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002bd759bbc17d" Acct-Session-Id = "59bbc17d/08:ed:b9:92:1e:85/512" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x020700901980000000861603010046100000424104649bcd5ec144dd6f72872bd3ffb7bd7fa67c1fa8a396db4bd901bb3b4f03f71e18233dd95e14c86d3d8d3d507fe52bdfc6c375b1118942fd80a351a6a44193ee14030100010116030100301d392e3e9d125888224d8dd1de80082727c8df767e36f0d8a7fe125823ec5680591e4cd7240c6f860188b8669b8cc0e4 State = 0x3fe4315a3be3287eafacb5cefacbc437 Message-Authenticator = 0xafa3dcd96b66b6a16452d05a4f96c074 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz@mydomain.com" [suffix] Found realm "mydomain.com" [suffix] Adding Stripped-User-Name = "psitarz" [suffix] Adding Realm = "mydomain.com" [suffix] Authentication realm is LOCAL. ++[suffix] = ok [eap] EAP packet type response id 7 length 144 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 134 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange [peap] TLS_accept: unknown state [peap] TLS_accept: unknown state [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: unknown state [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: unknown state [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: unknown state [peap] TLS_accept: unknown state [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 87 to 10.24.100.41 port 32773 EAP-Message = 0x0108004119001403010001011603010030acd1c954ec8db1f20de9d8db4ad3519ff15901abb1acc9bf9931fb878f243ce019316ac396e3bd8777c367026ceac999 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3fe4315a3aec287eafacb5cefacbc437 Finished request 5. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.24.100.41 port 32773, id=88, length=288 User-Name = "psitarz@mydomain.com" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002bd759bbc17d" Acct-Session-Id = "59bbc17d/08:ed:b9:92:1e:85/512" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x020800061900 State = 0x3fe4315a3aec287eafacb5cefacbc437 Message-Authenticator = 0xcb2a406971b98b24c4a9e0cf6b968713 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz@mydomain.com" [suffix] Found realm "mydomain.com" [suffix] Adding Stripped-User-Name = "psitarz" [suffix] Adding Realm = "mydomain.com" [suffix] Authentication realm is LOCAL. ++[suffix] = ok [eap] EAP packet type response id 8 length 6 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS [peap] Session established. Decoding tunneled attributes. [peap] Peap state TUNNEL ESTABLISHED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 88 to 10.24.100.41 port 32773 EAP-Message = 0x0109002b19001703010020628ce98232e407d213092b722f8a4909997908ad280d58bcb6cbdbd7b96a5ec6 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3fe4315a39ed287eafacb5cefacbc437 Finished request 6. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.24.100.41 port 32773, id=89, length=341 User-Name = "psitarz@mydomain.com" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002bd759bbc17d" Acct-Session-Id = "59bbc17d/08:ed:b9:92:1e:85/512" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x0209003b190017030100309f8380f1c3018f77e1cf6b6f3f3848fb8d621162c7e784a284ff58ba9d47d491e59e54c27fcab1af84cd55440e8d1f3b State = 0x3fe4315a39ed287eafacb5cefacbc437 Message-Authenticator = 0x89d32fd7e70d6c41c8ded9ebe6a6a9c1 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz@mydomain.com" [suffix] Found realm "mydomain.com" [suffix] Adding Stripped-User-Name = "psitarz" [suffix] Adding Realm = "mydomain.com" [suffix] Authentication realm is LOCAL. ++[suffix] = ok [eap] EAP packet type response id 9 length 59 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state WAITING FOR INNER IDENTITY [peap] Identity - psitarz@mydomain.com [peap] Got inner identity 'psitarz@mydomain.com' [peap] Setting default EAP type for tunneled EAP session. [peap] Got tunneled request EAP-Message = 0x02090017017073697461727a40696a702e70616e2e706c server { [peap] Setting User-Name to psitarz@mydomain.com Sending tunneled request EAP-Message = 0x02090017017073697461727a40696a702e70616e2e706c FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "psitarz@mydomain.com" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002bd759bbc17d" Acct-Session-Id = "59bbc17d/08:ed:b9:92:1e:85/512" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +group authorize { ++[chap] = noop ++[mschap] = noop [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz@mydomain.com" [suffix] Found realm "mydomain.com" [suffix] Adding Stripped-User-Name = "psitarz" [suffix] Adding Realm = "mydomain.com" [suffix] Authentication realm is LOCAL. ++[suffix] = ok [eap] EAP packet type response id 9 length 23 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated [files] users: Matched entry DEFAULT at line 12 ++[files] = ok [ldap] performing user authorization for psitarz [ldap] expand: %{Stripped-User-Name} -> psitarz [ldap] expand: (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) -> (sAMAccountName=psitarz) [ldap] expand: dc=ijp,dc=pan,dc=local -> dc=ijp,dc=pan,dc=local [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=ijp,dc=pan,dc=local, with filter (sAMAccountName=psitarz) [ldap] rebind to URL ldap://ijp.pan.local/CN=Configuration,DC=ijp,DC=pan,DC=local [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] ldap_release_conn: Release Id: 0 ++[ldap] = ok ++[expiration] = noop ++[logintime] = noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel +group authenticate { [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] = handled +} # group authenticate = handled } # server inner-tunnel [peap] Got tunneled reply code 11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 := "200" Reply-Message = "YYYY HIT: my_wifi" EAP-Message = 0x010a002c1a010a0027101cb34ea8d6a498e4301be136eedcdbcc7073697461727a40696a702e70616e2e706c Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9552487f9558526373eb233775b533a4 [peap] Got tunneled reply RADIUS code 11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 := "200" Reply-Message = "YYYY HIT: my_wifi" EAP-Message = 0x010a002c1a010a0027101cb34ea8d6a498e4301be136eedcdbcc7073697461727a40696a702e70616e2e706c Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9552487f9558526373eb233775b533a4 [peap] Got tunneled Access-Challenge ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 89 to 10.24.100.41 port 32773 EAP-Message = 0x010a004b19001703010040ba5780efc88790ce3f435c17681f219beae1bf3d46e7e3834e7c3c594ea182d073ae579714d0c0b0cd29068a10f831a1d5ba4dedc866b909eb11e16698a725bd Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3fe4315a38ee287eafacb5cefacbc437 Finished request 7. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.24.100.41 port 32773, id=90, length=389 User-Name = "psitarz@mydomain.com" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002bd759bbc17d" Acct-Session-Id = "59bbc17d/08:ed:b9:92:1e:85/512" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x020a006b19001703010060896bfdfc9f0dae60d45ff30c8d21b402fe9ceb00729dbc4349bff60a8d14ce0a006a8d9dd2d0c4cad6ad7e2356a5068ab6a74949c787f9a0c2e715e57dc0c4d062d1909772cf41dccf214dd6ec6690bddb1119e3bc20eb6b050f9aa9d21131cb State = 0x3fe4315a38ee287eafacb5cefacbc437 Message-Authenticator = 0x2c18eae85d9573ff58095827c631c353 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz@mydomain.com" [suffix] Found realm "mydomain.com" [suffix] Adding Stripped-User-Name = "psitarz" [suffix] Adding Realm = "mydomain.com" [suffix] Authentication realm is LOCAL. ++[suffix] = ok [eap] EAP packet type response id 10 length 107 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020a004d1a020a004831ac0f1e738de655f3a91eb6d8601867ac00000000000000003dfa9870744bc6c76e48dcc4404aea1d38ab5b40f9abb049007073697461727a40696a702e70616e2e706c server { [peap] Setting User-Name to psitarz@mydomain.com Sending tunneled request EAP-Message = 0x020a004d1a020a004831ac0f1e738de655f3a91eb6d8601867ac00000000000000003dfa9870744bc6c76e48dcc4404aea1d38ab5b40f9abb049007073697461727a40696a702e70616e2e706c FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "psitarz@mydomain.com" State = 0x9552487f9558526373eb233775b533a4 Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002bd759bbc17d" Acct-Session-Id = "59bbc17d/08:ed:b9:92:1e:85/512" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +group authorize { ++[chap] = noop ++[mschap] = noop [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz@mydomain.com" [suffix] Found realm "mydomain.com" [suffix] Adding Stripped-User-Name = "psitarz" [suffix] Adding Realm = "mydomain.com" [suffix] Authentication realm is LOCAL. ++[suffix] = ok [eap] EAP packet type response id 10 length 77 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated [files] users: Matched entry DEFAULT at line 12 ++[files] = ok [ldap] performing user authorization for psitarz [ldap] expand: %{Stripped-User-Name} -> psitarz [ldap] expand: (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) -> (sAMAccountName=psitarz) [ldap] expand: dc=ijp,dc=pan,dc=local -> dc=ijp,dc=pan,dc=local [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=ijp,dc=pan,dc=local, with filter (sAMAccountName=psitarz) [ldap] rebind to URL ldap://ijp.pan.local/CN=Configuration,DC=ijp,DC=pan,DC=local [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] ldap_release_conn: Release Id: 0 ++[ldap] = ok ++[expiration] = noop ++[logintime] = noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel +group authenticate { [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel [mschapv2] +group MS-CHAP { [mschap] Creating challenge hash with username: psitarz@mydomain.com [mschap] Client is using MS-CHAPv2 for psitarz@mydomain.com, we need NT-Password [mschap] expand: %{Stripped-User-Name} -> psitarz [mschap] expand: --username=%{%{Stripped-User-Name}:-%{User-Name:-None}} -> --username=psitarz [mschap] Creating challenge hash with username: psitarz@mydomain.com [mschap] expand: --challenge=%{mschap:Challenge:-00} -> --challenge=7255d8e9452790c4 [mschap] expand: --nt-response=%{mschap:NT-Response:-00} -> --nt-response=3dfa9870744bc6c76e48dcc4404aea1d38ab5b40f9abb049 Exec output: NT_KEY: AC6BB5917C08C8881AF8A3510F56E0C3 Exec plaintext: NT_KEY: AC6BB5917C08C8881AF8A3510F56E0C3 [mschap] Exec: program returned: 0 ++[mschap] = ok +} # group MS-CHAP = ok MSCHAP Success ++[eap] = handled +} # group authenticate = handled } # server inner-tunnel [peap] Got tunneled reply code 11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 := "200" Reply-Message = "YYYY HIT: my_wifi" EAP-Message = 0x010b00331a030a002e533d37364231393734333131413938323034453043384345443143413838343331384444393042424131 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9552487f9459526373eb233775b533a4 [peap] Got tunneled reply RADIUS code 11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 := "200" Reply-Message = "YYYY HIT: my_wifi" EAP-Message = 0x010b00331a030a002e533d37364231393734333131413938323034453043384345443143413838343331384444393042424131 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9552487f9459526373eb233775b533a4 [peap] Got tunneled Access-Challenge ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 90 to 10.24.100.41 port 32773 EAP-Message = 0x010b005b190017030100505d1d14177674aa5e5462aab4608afbab154c9307302e3a594b7aa3efa14a2fd40fe3e4d69f542672d4c81138e0aa825f3b4bca45ab01fe00145eedc5ead065796a97f7cdd6ff78c81bbf558d62622b70 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3fe4315a37ef287eafacb5cefacbc437 Finished request 8. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 10.24.100.41 port 32773, id=91, length=325 User-Name = "psitarz@mydomain.com" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002bd759bbc17d" Acct-Session-Id = "59bbc17d/08:ed:b9:92:1e:85/512" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x020b002b1900170301002053fc2a773fa955562c1f54669786ba610fee3162aebd23db8f3c3678220bf38e State = 0x3fe4315a37ef287eafacb5cefacbc437 Message-Authenticator = 0xcc8aec26bd1328f808c3bd3b397a1611 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz@mydomain.com" [suffix] Found realm "mydomain.com" [suffix] Adding Stripped-User-Name = "psitarz" [suffix] Adding Realm = "mydomain.com" [suffix] Authentication realm is LOCAL. ++[suffix] = ok [eap] EAP packet type response id 11 length 43 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020b00061a03 server { [peap] Setting User-Name to psitarz@mydomain.com Sending tunneled request EAP-Message = 0x020b00061a03 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "psitarz@mydomain.com" State = 0x9552487f9459526373eb233775b533a4 Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002bd759bbc17d" Acct-Session-Id = "59bbc17d/08:ed:b9:92:1e:85/512" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +group authorize { ++[chap] = noop ++[mschap] = noop [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz@mydomain.com" [suffix] Found realm "mydomain.com" [suffix] Adding Stripped-User-Name = "psitarz" [suffix] Adding Realm = "mydomain.com" [suffix] Authentication realm is LOCAL. ++[suffix] = ok [eap] EAP packet type response id 11 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated [files] users: Matched entry DEFAULT at line 12 ++[files] = ok [ldap] performing user authorization for psitarz [ldap] expand: %{Stripped-User-Name} -> psitarz [ldap] expand: (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) -> (sAMAccountName=psitarz) [ldap] expand: dc=ijp,dc=pan,dc=local -> dc=ijp,dc=pan,dc=local [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=ijp,dc=pan,dc=local, with filter (sAMAccountName=psitarz) [ldap] rebind to URL ldap://ijp.pan.local/CN=Configuration,DC=ijp,DC=pan,DC=local [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] ldap_release_conn: Release Id: 0 ++[ldap] = ok ++[expiration] = noop ++[logintime] = noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel +group authenticate { [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [eap] Freeing handler ++[eap] = ok +} # group authenticate = ok WARNING: Empty post-auth section. Using default return values. # Executing section post-auth from file /etc/freeradius/sites-enabled/inner-tunnel } # server inner-tunnel [peap] Got tunneled reply code 2 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 := "200" Reply-Message = "YYYY HIT: my_wifi" EAP-Message = 0x030b0004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "psitarz" [peap] Got tunneled reply RADIUS code 2 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 := "200" Reply-Message = "YYYY HIT: my_wifi" EAP-Message = 0x030b0004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "psitarz" [peap] Tunneled authentication was successful. [peap] SUCCESS [peap] Saving tunneled attributes for later ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 91 to 10.24.100.41 port 32773 EAP-Message = 0x010c002b1900170301002003329f8e825477a95e2d5d9a864888a51936c3b7e73a676c6c54dfbfe3ea7053 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3fe4315a36e8287eafacb5cefacbc437 Finished request 9. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 10.24.100.41 port 32773, id=92, length=325 User-Name = "psitarz@mydomain.com" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002bd759bbc17d" Acct-Session-Id = "59bbc17d/08:ed:b9:92:1e:85/512" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x020c002b190017030100209e43f77a691dafaaf1679f783c5e8420647896f6f6e4bbddfe4bed0edabef0ba State = 0x3fe4315a36e8287eafacb5cefacbc437 Message-Authenticator = 0xb175b0014288cb0b3473357c46176774 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz@mydomain.com" [suffix] Found realm "mydomain.com" [suffix] Adding Stripped-User-Name = "psitarz" [suffix] Adding Realm = "mydomain.com" [suffix] Authentication realm is LOCAL. ++[suffix] = ok [eap] EAP packet type response id 12 length 43 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state send tlv success [peap] Received EAP-TLV response. [peap] Success [peap] Using saved attributes from the original Access-Accept Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 := "200" Reply-Message = "YYYY HIT: my_wifi" User-Name = "psitarz" [eap] Freeing handler ++[eap] = ok +} # group authenticate = ok # Executing section post-auth from file /etc/freeradius/sites-enabled/default +group post-auth { ++[ldap] = noop ++[exec] = noop +} # group post-auth = noop Sending Access-Accept of id 92 to 10.24.100.41 port 32773 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 := "200" Reply-Message = "YYYY HIT: my_wifi" User-Name = "psitarz" MS-MPPE-Recv-Key = 0x4cf776a7e27cec2632e0f01bd830d3ba567f27626108254186a03331090a3cf0 MS-MPPE-Send-Key = 0xca0ecdcdafedbbffc97f0a3debaa8b66213dcdd2c36cf403a4f89675ffb6ddea EAP-Message = 0x030c0004 Message-Authenticator = 0x00000000000000000000000000000000 Finished request 10. Going to the next request Waking up in 4.8 seconds. rad_recv: Accounting-Request packet from host 10.24.100.41 port 32773, id=10, length=304 User-Name = "psitarz" NAS-Port = 13 NAS-IP-Address = 10.24.100.41 Framed-IP-Address = 10.24.201.161 Framed-IPv6-Prefix = fe80::/64 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Acct-Session-Id = "59bbc17d/08:ed:b9:92:1e:85/512" NAS-Port-Type = Wireless-802.11 Cisco-AVPair = "audit-session-id=0a18642900002bd759bbc17d" Acct-Authentic = RADIUS Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "200" Event-Timestamp = "Sep 15 2017 14:06:09 CEST" Acct-Status-Type = Interim-Update Acct-Input-Octets = 14705 Acct-Input-Gigawords = 0 Acct-Output-Octets = 5517 Acct-Output-Gigawords = 0 Acct-Input-Packets = 123 Acct-Output-Packets = 29 Acct-Session-Time = 177 Acct-Delay-Time = 0 Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" # Executing section preacct from file /etc/freeradius/sites-enabled/default +group preacct { ++[preprocess] = ok [acct_unique] Hashing 'NAS-Port = 13,NAS-Identifier = "my_wifi",NAS-IP-Address = 10.24.100.41,Acct-Session-Id = "59bbc17d/08:ed:b9:92:1e:85/512",User-Name = "psitarz"' [acct_unique] Acct-Unique-Session-ID = "17384594c41c6025". ++[acct_unique] = ok [suffix] No '@' in User-Name = "psitarz", looking up realm NULL [suffix] Found realm "NULL" [suffix] Adding Stripped-User-Name = "psitarz" [suffix] Adding Realm = "NULL" [suffix] Accounting realm is LOCAL. ++[suffix] = ok ++[files] = noop +} # group preacct = ok # Executing section accounting from file /etc/freeradius/sites-enabled/default +group accounting { [detail] expand: %{Packet-Src-IP-Address} -> 10.24.100.41 [detail] expand: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d -> /var/log/freeradius/radacct/10.24.100.41/detail-20170915 [detail] /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/freeradius/radacct/10.24.100.41/detail-20170915 [detail] expand: %t -> Fri Sep 15 14:06:09 2017 ++[detail] = ok ++[unix] = noop ++[exec] = noop [attr_filter.accounting_response] expand: %{User-Name} -> psitarz attr_filter: Matched entry DEFAULT at line 12 ++[attr_filter.accounting_response] = updated +} # group accounting = updated Sending Accounting-Response of id 10 to 10.24.100.41 port 32773 Finished request 11. Cleaning up request 11 ID 10 with timestamp +15 Going to the next request Waking up in 4.8 seconds. Cleaning up request 0 ID 82 with timestamp +15 Cleaning up request 1 ID 83 with timestamp +15 Cleaning up request 2 ID 84 with timestamp +15 Cleaning up request 3 ID 85 with timestamp +15 Cleaning up request 4 ID 86 with timestamp +15 Cleaning up request 5 ID 87 with timestamp +15 Cleaning up request 6 ID 88 with timestamp +15 Cleaning up request 7 ID 89 with timestamp +15 Cleaning up request 8 ID 90 with timestamp +15 Cleaning up request 9 ID 91 with timestamp +15 Cleaning up request 10 ID 92 with timestamp +15 Ready to process requests. W dniu 15.09.2017 o 13:22, Alan DeKok pisze:
On Sep 15, 2017, at 3:23 AM, Zenon Matuszyk <zenon.matuszyk@networkers.pl> wrote:
I have trouble assigning the vlan to users in different groups. If I have one group and if the user is in this group gets a VLAN 200. If another user is in another group (add another entry in the users file with the group and vlan), it does not log on or continue to receive the vlan 200 and I want it to get vlan 216. Below debug with login. If you read the debug output, you'll see the problem has nothing to do with the users file.
Fri Sep 15 09:07:01 2017 : Info: freeradius: FreeRADIUS Version 2.2.5, for host x86_64-pc-linux-gnu, built on Aug 10 2017 at 07:25:15 Fri Sep 15 09:07:01 2017 : Debug: Server was built with: Fri Sep 15 09:07:01 2017 : Debug: accounting PLEASE follow instructions and run with "freeradius -X". Not "-Xx". Fri Sep 15 09:07:16 2017 : Info: [mschapv2] # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel Fri Sep 15 09:07:16 2017 : Info: [mschapv2] +group MS-CHAP { Fri Sep 15 09:07:16 2017 : Info: [mschap] Creating challenge hash with username: psitarz@mydomain.com Fri Sep 15 09:07:16 2017 : Info: [mschap] Client is using MS-CHAPv2 for psitarz@mydomain.com, we need NT-Password Fri Sep 15 09:07:16 2017 : Info: [mschap] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details Fri Sep 15 09:07:16 2017 : Info: [mschap] expand: --username=%{Stripped-User-Name:-%{User-Name:-None}} -> --username=psitarz Fri Sep 15 09:07:16 2017 : Info: [mschap] Creating challenge hash with username: psitarz@mydomain.com Fri Sep 15 09:07:16 2017 : Info: [mschap] expand: --challenge=%{mschap:Challenge:-00} -> --challenge=30cedb6750524fca Fri Sep 15 09:07:16 2017 : Info: [mschap] expand: --nt-response=%{mschap:NT-Response:-00} -> --nt-response=dbdff2050731af4d5e7f6bbcc15f6ba740b157f5df29b787 Fri Sep 15 09:07:16 2017 : Debug: Exec output: Logon failure (0xc000006d) Fri Sep 15 09:07:16 2017 : Debug: Exec plaintext: Logon failure (0xc000006d) Fri Sep 15 09:07:16 2017 : Info: [mschap] Exec: program returned: 1 Fri Sep 15 09:07:16 2017 : Info: [mschap] External script failed. That would seem to be the problem.
It has nothing to do with groups or the "users" file.
Read the debug output. It *tells you* what's going wrong.
Alan DeKok.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-- Z poważaniem / Yours sincerely Zenon Matuszyk mobile: 00 48 797 004 938 e-mail: zenon.matuszyk@networkers.pl www: http://www.networkers.pl