I’m new to freeRadius and Linux (Suse) and need some help. I apologize but I really don’t know the question to ask because of my limited knowledge of Linux and wireless technology, but I’ll give it a try. I setup freeRadius v1.0.2 on SUSE v9.0. I have another NetWare 6.5 server installed hopefully to be used as the LDAP server that freeRadius will use to get usernames and passwords from eDirectory via LDAP. I followed the following guide for my setup… HYPERLINK "http://www.novell.com/coolsolutions/tip/15922.html"http://www.novell.com/co olsolutions/tip/15922.html I’m using D-Link DWP-8200 access points which supports WPA2/Enterprise. I’ve setup this access point to point to my SUSE server. I can start Radius on the Linux box, but when I try to connect through the access point, I am getting no response on the Radius server. Everything IP wise is fine, I can ping from everywhere and if I change the Access Point to a Linksys WAP55AG, I get a login screen (not that I know the format to put the username, password, and how domain would be used with NetWare). My client has the D-Link DWP-8200 access points, and I’d like to get it working with this if possible so they don’t have to buy 50 new access points. I believe I’m trying to use EAP/TLS with LDAP authentication. I guess my question is, does the D-Link 8200-AP work with freeRadius, and if so, does anyone know NetWare enough to give me a hand. I understand if that isn’t possible, but I thought I’d at least try. I’m sorry for being so vague, but maybe I can learn a little about wireless security and authentication if anything. The D-Link seems to have the same settings as the Linksys, so I hope it can work. Thanks- Chris -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.12.4/146 - Release Date: 10/21/2005