You need to delete *everything* from the current installation. Binaries, libraries, configuration files, the whole raddb/ directory. Then re-install, and don't mangle the configuration again.
Alan DeKok.
hi radtest is ok and output below but pc is not ; maybe pc 8021x configration is incorrect. How do I configure correctly it Thanks rad_recv: Access-Request packet from host 10.1.1.97 port 43367, id=43, length=58 User-Name = "deneme" User-Password = "1" NAS-IP-Address = 127.0.1.1 NAS-Port = 123 +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "deneme", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound users: Matched entry deneme at line 90 expand: Hello, %{User-Name} -> Hello, deneme ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns updated rad_check_password: Found Auth-Type auth: type "PAP" +- entering group PAP rlm_pap: login attempt with password "1" rlm_pap: Using clear text password "1" rlm_pap: User authenticated successfully ++[pap] returns ok Login OK: [deneme/1] (from client BIMAP port 123) +- entering group post-auth ++[exec] returns noop Sending Access-Accept of id 43 to 10.1.1.97 port 43367 Reply-Message = "Hello, deneme" Finished request 0. Going to the next request Waking up in 4.9 seconds. Cleaning up request 0 ID 43 with timestamp +3 _________________________________________________________________ Yeni Windows 7: Size en uygun bilgisayarı bulun. Daha fazla bilgi edinin. http://windows.microsoft.com/shop