Re: Authentication and Rest

29 Mar 2018

      Matthew:

Thank you very much for the response:  I know you guys answer a lot of questions.

I did as you suggested, and moved the rest into inner-tunnel authorization (and the logs show Cleartext-Password returned and recognized); however, the md5 module doesn't seem to see it.

I do apologize for the size of the logs...

------------

FreeRADIUS Version 3.0.15

Copyright (C) 1999-2017 The FreeRADIUS server project and contributors

There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A

PARTICULAR PURPOSE

You may redistribute copies of FreeRADIUS under the terms of the

GNU General Public License

For more information about these matters, see the file named COPYRIGHT

Starting - reading configuration files ...

including dictionary file /usr/share/freeradius/dictionary

including dictionary file /usr/share/freeradius/dictionary.dhcp

including dictionary file /usr/share/freeradius/dictionary.vqp

including dictionary file /etc/freeradius/dictionary

including configuration file /etc/freeradius/radiusd.conf

including configuration file /etc/freeradius/proxy.conf

including configuration file /etc/freeradius/clients.conf

including files in directory /etc/freeradius/mods-enabled/

including configuration file /etc/freeradius/mods-enabled/expiration

including configuration file /etc/freeradius/mods-enabled/radutmp

including configuration file /etc/freeradius/mods-enabled/unpack

including configuration file /etc/freeradius/mods-enabled/files

including configuration file /etc/freeradius/mods-enabled/detail

including configuration file /etc/freeradius/mods-enabled/sradutmp

including configuration file /etc/freeradius/mods-enabled/passwd

including configuration file /etc/freeradius/mods-enabled/dynamic_clients

including configuration file /etc/freeradius/mods-enabled/realm

including configuration file /etc/freeradius/mods-enabled/echo

including configuration file /etc/freeradius/mods-enabled/ntlm_auth

including configuration file /etc/freeradius/mods-enabled/digest

including configuration file /etc/freeradius/mods-enabled/eap

including configuration file /etc/freeradius/mods-enabled/unix

including configuration file /etc/freeradius/mods-enabled/expr

including configuration file /etc/freeradius/mods-enabled/chap

including configuration file /etc/freeradius/mods-enabled/linelog

including configuration file /etc/freeradius/mods-enabled/detail.log

including configuration file /etc/freeradius/mods-enabled/pap

including configuration file /etc/freeradius/mods-enabled/exec

including configuration file /etc/freeradius/mods-enabled/cache_eap

including configuration file /etc/freeradius/mods-enabled/replicate

including configuration file /etc/freeradius/mods-enabled/mschap

including configuration file /etc/freeradius/mods-enabled/always

including configuration file /etc/freeradius/mods-enabled/utf8

including configuration file /etc/freeradius/mods-enabled/logintime

including configuration file /etc/freeradius/mods-enabled/soh

including configuration file /etc/freeradius/mods-enabled/attr_filter

including configuration file /etc/freeradius/mods-enabled/rest

including configuration file /etc/freeradius/mods-enabled/date

including configuration file /etc/freeradius/mods-enabled/preprocess

including files in directory /etc/freeradius/policy.d/

including configuration file /etc/freeradius/policy.d/debug

including configuration file /etc/freeradius/policy.d/cui

including configuration file /etc/freeradius/policy.d/filter

including configuration file /etc/freeradius/policy.d/dhcp

including configuration file /etc/freeradius/policy.d/eap

including configuration file /etc/freeradius/policy.d/canonicalization

including configuration file /etc/freeradius/policy.d/accounting

including configuration file /etc/freeradius/policy.d/control

including configuration file /etc/freeradius/policy.d/operator-name

including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids

including configuration file /etc/freeradius/policy.d/abfab-tr

including files in directory /etc/freeradius/sites-enabled/

including configuration file /etc/freeradius/sites-enabled/inner-tunnel

including configuration file /etc/freeradius/sites-enabled/default

main {

 security {

  user = "freerad"

  group = "freerad"

  allow_core_dumps = no

 }

name = "freeradius"

prefix = "/usr"

localstatedir = "/var"

logdir = "/var/log/freeradius"

run_dir = "/var/run/freeradius"

}

main {

name = "freeradius"

prefix = "/usr"

localstatedir = "/var"

sbindir = "/usr/sbin"

logdir = "/var/log/freeradius"

run_dir = "/var/run/freeradius"

libdir = "/usr/lib/freeradius"

radacctdir = "/var/log/freeradius/radacct"

hostname_lookups = no

max_request_time = 30

cleanup_delay = 5

max_requests = 16384

pidfile = "/var/run/freeradius/freeradius.pid"

checkrad = "/usr/sbin/checkrad"

debug_level = 0

proxy_requests = yes

 log {

  stripped_names = no

  auth = no

  auth_badpass = no

  auth_goodpass = no

  colourise = yes

  msg_denied = "You are already logged in - access denied"

 }

 resources {

 }

 security {

  max_attributes = 200

  reject_delay = 1.000000

  status_server = yes

 }

}

radiusd: #### Loading Realms and Home Servers ####

 proxy server {

  retry_delay = 5

  retry_count = 3

  default_fallback = no

  dead_time = 120

  wake_all_if_all_dead = no

 }

 home_server localhost {

  ipaddr = 127.0.0.1

  port = 1812

  type = "auth"

  secret = <<< secret >>>

  response_window = 20.000000

  response_timeouts = 1

  max_outstanding = 65536

  zombie_period = 40

  status_check = "status-server"

  ping_interval = 30

  check_interval = 30

  check_timeout = 4

  num_answers_to_alive = 3

  revive_interval = 120

  limit {

  max_connections = 16

  max_requests = 0

  lifetime = 0

  idle_timeout = 0

  }

  coa {

  irt = 2

  mrt = 16

  mrc = 5

  mrd = 30

  }

 }

 home_server_pool my_auth_failover {

type = fail-over

home_server = localhost

 }

 realm example.com {

auth_pool = my_auth_failover

 }

 realm LOCAL {

 }

radiusd: #### Loading Clients ####

 client 0.0.0.0/0 {

  require_message_authenticator = no

  secret = <<< secret >>>

  shortname = "all"

  limit {

  max_connections = 16

  lifetime = 0

  idle_timeout = 30

  }

 }

No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 0.0.0.0/0. Please fix your configuration

Support for old-style clients will be removed in a future release

 client ::/0 {

  require_message_authenticator = no

  secret = <<< secret >>>

  shortname = "all"

  limit {

  max_connections = 16

  lifetime = 0

  idle_timeout = 30

  }

 }

No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client ::/0. Please fix your configuration

Support for old-style clients will be removed in a future release

Debugger not attached

 # Creating Auth-Type = mschap

 # Creating Auth-Type = eap

 # Creating Auth-Type = PAP

 # Creating Auth-Type = CHAP

 # Creating Auth-Type = MS-CHAP

radiusd: #### Instantiating modules ####

 modules {

  # Loaded module rlm_expiration

  # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration

  # Loaded module rlm_radutmp

  # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp

  radutmp {

  filename = "/var/log/freeradius/radutmp"

  username = "%{User-Name}"

  case_sensitive = yes

  check_with_nas = yes

  permissions = 384

  caller_id = yes

  }

  # Loaded module rlm_unpack

  # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack

  # Loaded module rlm_files

  # Loading module "files" from file /etc/freeradius/mods-enabled/files

  files {

  filename = "/etc/freeradius/mods-config/files/authorize"

  acctusersfile = "/etc/freeradius/mods-config/files/accounting"

  preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"

  }

  # Loaded module rlm_detail

  # Loading module "detail" from file /etc/freeradius/mods-enabled/detail

  detail {

  filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"

  header = "%t"

  permissions = 384

  locking = no

  escape_filenames = no

  log_packet_header = no

  }

  # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp

  radutmp sradutmp {

  filename = "/var/log/freeradius/sradutmp"

  username = "%{User-Name}"

  case_sensitive = yes

  check_with_nas = yes

  permissions = 420

  caller_id = no

  }

  # Loaded module rlm_passwd

  # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd

  passwd etc_passwd {

  filename = "/etc/passwd"

  format = "*User-Name:Crypt-Password:"

  delimiter = ":"

  ignore_nislike = no

  ignore_empty = yes

  allow_multiple_keys = no

  hash_size = 100

  }

  # Loaded module rlm_dynamic_clients

  # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients

  # Loaded module rlm_realm

  # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm

  realm IPASS {

  format = "prefix"

  delimiter = "/"

  ignore_default = no

  ignore_null = no

  }

  # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm

  realm suffix {

  format = "suffix"

  delimiter = "@"

  ignore_default = no

  ignore_null = no

  }

  # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm

  realm realmpercent {

  format = "suffix"

  delimiter = "%"

  ignore_default = no

  ignore_null = no

  }

  # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm

  realm ntdomain {

  format = "prefix"

  delimiter = "\\"

  ignore_default = no

  ignore_null = no

  }

  # Loaded module rlm_exec

  # Loading module "echo" from file /etc/freeradius/mods-enabled/echo

  exec echo {

  wait = yes

  program = "/bin/echo %{User-Name}"

  input_pairs = "request"

  output_pairs = "reply"

  shell_escape = yes

  }

  # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth

  exec ntlm_auth {

  wait = yes

  program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"

  shell_escape = yes

  }

  # Loaded module rlm_digest

  # Loading module "digest" from file /etc/freeradius/mods-enabled/digest

  # Loaded module rlm_eap

  # Loading module "eap" from file /etc/freeradius/mods-enabled/eap

  eap {

  default_eap_type = "md5"

  timer_expire = 60

  ignore_unknown_eap_types = no

  cisco_accounting_username_bug = no

  max_sessions = 16384

  }

  # Loaded module rlm_unix

  # Loading module "unix" from file /etc/freeradius/mods-enabled/unix

  unix {

  radwtmp = "/var/log/freeradius/radwtmp"

  }

Creating attribute Unix-Group

  # Loaded module rlm_expr

  # Loading module "expr" from file /etc/freeradius/mods-enabled/expr

  expr {

  safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"

  }

  # Loaded module rlm_chap

  # Loading module "chap" from file /etc/freeradius/mods-enabled/chap

  # Loaded module rlm_linelog

  # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog

  linelog {

  filename = "/var/log/freeradius/linelog"

  escape_filenames = no

  syslog_severity = "info"

  permissions = 384

  format = "This is a log message for %{User-Name}"

  reference = "messages.%{%{reply:Packet-Type}:-default}"

  }

  # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog

  linelog log_accounting {

  filename = "/var/log/freeradius/linelog-accounting"

  escape_filenames = no

  syslog_severity = "info"

  permissions = 384

  format = ""

  reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"

  }

  # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log

  detail auth_log {

  filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"

  header = "%t"

  permissions = 384

  locking = no

  escape_filenames = no

  log_packet_header = no

  }

  # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log

  detail reply_log {

  filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"

  header = "%t"

  permissions = 384

  locking = no

  escape_filenames = no

  log_packet_header = no

  }

  # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log

  detail pre_proxy_log {

  filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"

  header = "%t"

  permissions = 384

  locking = no

  escape_filenames = no

  log_packet_header = no

  }

  # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log

  detail post_proxy_log {

  filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"

  header = "%t"

  permissions = 384

  locking = no

  escape_filenames = no

  log_packet_header = no

  }

  # Loaded module rlm_pap

  # Loading module "pap" from file /etc/freeradius/mods-enabled/pap

  pap {

  normalise = yes

  }

  # Loading module "exec" from file /etc/freeradius/mods-enabled/exec

  exec {

  wait = no

  input_pairs = "request"

  shell_escape = yes

  timeout = 10

  }

  # Loaded module rlm_cache

  # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap

  cache cache_eap {

  driver = "rlm_cache_rbtree"

  key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"

  ttl = 15

  max_entries = 0

  epoch = 0

  add_stats = no

  }

  # Loaded module rlm_replicate

  # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate

  # Loaded module rlm_mschap

  # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap

  mschap {

  use_mppe = yes

  require_encryption = no

  require_strong = no

  with_ntdomain_hack = yes

   passchange {

   }

  allow_retry = yes

  winbind_retry_with_normalised_username = no

  }

  # Loaded module rlm_always

  # Loading module "reject" from file /etc/freeradius/mods-enabled/always

  always reject {

  rcode = "reject"

  simulcount = 0

  mpp = no

  }

  # Loading module "fail" from file /etc/freeradius/mods-enabled/always

  always fail {

  rcode = "fail"

  simulcount = 0

  mpp = no

  }

  # Loading module "ok" from file /etc/freeradius/mods-enabled/always

  always ok {

  rcode = "ok"

  simulcount = 0

  mpp = no

  }

  # Loading module "handled" from file /etc/freeradius/mods-enabled/always

  always handled {

  rcode = "handled"

  simulcount = 0

  mpp = no

  }

  # Loading module "invalid" from file /etc/freeradius/mods-enabled/always

  always invalid {

  rcode = "invalid"

  simulcount = 0

  mpp = no

  }

  # Loading module "userlock" from file /etc/freeradius/mods-enabled/always

  always userlock {

  rcode = "userlock"

  simulcount = 0

  mpp = no

  }

  # Loading module "notfound" from file /etc/freeradius/mods-enabled/always

  always notfound {

  rcode = "notfound"

  simulcount = 0

  mpp = no

  }

  # Loading module "noop" from file /etc/freeradius/mods-enabled/always

  always noop {

  rcode = "noop"

  simulcount = 0

  mpp = no

  }

  # Loading module "updated" from file /etc/freeradius/mods-enabled/always

  always updated {

  rcode = "updated"

  simulcount = 0

  mpp = no

  }

  # Loaded module rlm_utf8

  # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8

  # Loaded module rlm_logintime

  # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime

  logintime {

  minimum_timeout = 60

  }

  # Loaded module rlm_soh

  # Loading module "soh" from file /etc/freeradius/mods-enabled/soh

  soh {

  dhcp = yes

  }

  # Loaded module rlm_attr_filter

  # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter

  attr_filter attr_filter.post-proxy {

  filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"

  key = "%{Realm}"

  relaxed = no

  }

  # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter

  attr_filter attr_filter.pre-proxy {

  filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"

  key = "%{Realm}"

  relaxed = no

  }

  # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter

  attr_filter attr_filter.access_reject {

  filename = "/etc/freeradius/mods-config/attr_filter/access_reject"

  key = "%{User-Name}"

  relaxed = no

  }

  # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter

  attr_filter attr_filter.access_challenge {

  filename = "/etc/freeradius/mods-config/attr_filter/access_challenge"

  key = "%{User-Name}"

  relaxed = no

  }

  # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter

  attr_filter attr_filter.accounting_response {

  filename = "/etc/freeradius/mods-config/attr_filter/accounting_response"

  key = "%{User-Name}"

  relaxed = no

  }

  # Loaded module rlm_rest

  # Loading module "rest" from file /etc/freeradius/mods-enabled/rest

  rest {

  connect_uri = "http://127.0.0.1:38080/"

  connect_timeout = 4.000000

  }

  # Loaded module rlm_date

  # Loading module "date" from file /etc/freeradius/mods-enabled/date

  date {

  format = "%b %e %Y %H:%M:%S %Z"

  utc = no

  }

  # Loaded module rlm_preprocess

  # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess

  preprocess {

  huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"

  hints = "/etc/freeradius/mods-config/preprocess/hints"

  with_ascend_hack = no

  ascend_channels_per_line = 23

  with_ntdomain_hack = no

  with_specialix_jetstream_hack = no

  with_cisco_vsa_hack = no

  with_alvarion_vsa_hack = no

  }

  instantiate {

  }

  # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration

  # Instantiating module "files" from file /etc/freeradius/mods-enabled/files

reading pairlist file /etc/freeradius/mods-config/files/authorize

reading pairlist file /etc/freeradius/mods-config/files/accounting

reading pairlist file /etc/freeradius/mods-config/files/pre-proxy

  # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail

  # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd

rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no

  # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm

  # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm

  # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm

  # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm

  # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap

   # Linked to sub-module rlm_eap_md5

   # Linked to sub-module rlm_eap_leap

   # Linked to sub-module rlm_eap_gtc

   gtc {

    challenge = "Password: "

    auth_type = "PAP"

   }

   # Linked to sub-module rlm_eap_tls

   tls {

    tls = "tls-common"

   }

   tls-config tls-common {

    verify_depth = 0

    ca_path = "/etc/freeradius/certs"

    pem_file_type = yes

    private_key_file = "/etc/freeradius/certs/server.pem"

    certificate_file = "/etc/freeradius/certs/server.pem"

    ca_file = "/etc/freeradius/certs/ca.pem"

    private_key_password = <<< secret >>>

    dh_file = "/etc/freeradius/certs/dh"

    fragment_size = 1024

    include_length = yes

    auto_chain = yes

    check_crl = no

    check_all_crl = no

    cipher_list = "DEFAULT"

    cipher_server_preference = no

    ecdh_curve = "prime256v1"

    cache {

    enable = no

    lifetime = 24

    max_entries = 255

    }

    verify {

    skip_if_ocsp_ok = no

    }

    ocsp {

    enable = no

    override_cert_url = yes

    url = "http://127.0.0.1/ocsp/"

    use_nonce = yes

    timeout = 0

    softfail = no

    }

   }

   # Linked to sub-module rlm_eap_ttls

   ttls {

    tls = "tls-common"

    default_eap_type = "md5"

    copy_request_to_tunnel = no

    use_tunneled_reply = no

    virtual_server = "inner-tunnel"

    include_length = yes

    require_client_cert = no

   }

tls: Using cached TLS configuration from previous invocation

   # Linked to sub-module rlm_eap_peap

   peap {

    tls = "tls-common"

    default_eap_type = "pap"

    copy_request_to_tunnel = no

    use_tunneled_reply = no

    proxy_tunneled_request_as_eap = yes

    virtual_server = "inner-tunnel"

    soh = no

    require_client_cert = no

   }

tls: Using cached TLS configuration from previous invocation

   # Linked to sub-module rlm_eap_mschapv2

   mschapv2 {

    with_ntdomain_hack = no

    send_error = no

   }

  # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog

  # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog

  # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log

rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output

  # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log

  # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log

  # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log

  # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap

  # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap

rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked

  # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap

rlm_mschap (mschap): using internal authentication

  # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always

  # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always

  # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always

  # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always

  # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always

  # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always

  # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always

  # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always

  # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always

  # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime

  # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter

reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy

  # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter

reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy

  # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter

reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject

[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".

[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".

  # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter

reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge

  # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter

reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response

  # Instantiating module "rest" from file /etc/freeradius/mods-enabled/rest

   authorize {

    uri = "http://127.0.0.1:38080/?user=%{User-Name}&mac=%{Called-Station-ID}&action=authorize"

    method = "get"

    body = "json"

    force_to = "json"

    auth = "none"

    require_auth = no

    timeout = 4.000000

    chunk = 0

    tls {

    check_cert = no

    check_cert_cn = no

    }

   }

   authenticate {

    uri = "http://127.0.0.1:38080/?user=%{User-Name}&mac=%{Called-Station-ID}&action=authenticate"

    method = "get"

    body = "json"

    force_to = "json"

    auth = "none"

    require_auth = no

    timeout = 4.000000

    chunk = 0

    tls {

    check_cert = no

    check_cert_cn = no

    }

   }

   accounting {

    uri = "http://127.0.0.1:38080/?user=%{User-Name}&sessions=%{Acct-Unique-Session-ID}"

    method = "post"

    body = "none"

    auth = "none"

    require_auth = no

    timeout = 4.000000

    chunk = 0

    tls {

    check_cert = no

    check_cert_cn = no

    }

   }

   post-auth {

    uri = "http://127.0.0.1:38080/?user=%{User-Name}&mac=%{Called-Station-ID}&action=post-auth"

    method = "post"

    body = "none"

    auth = "none"

    require_auth = no

    timeout = 4.000000

    chunk = 0

    tls {

    check_cert = no

    check_cert_cn = no

    }

   }

rlm_rest: libcurl version: libcurl/7.35.0 OpenSSL/1.0.1f zlib/1.2.8 libidn/1.28 librtmp/2.3

rlm_rest (rest): Initialising connection pool

   pool {

    start = 5

    min = 3

    max = 32

    spare = 10

    uses = 0

    lifetime = 0

    cleanup_interval = 30

    idle_timeout = 60

    retry_delay = 30

    spread = no

   }

rlm_rest (rest): Opening additional connection (0), 1 of 32 pending slots used

rlm_rest (rest): Connecting to "http://127.0.0.1:38080/"

rlm_rest (rest): Opening additional connection (1), 1 of 31 pending slots used

rlm_rest (rest): Connecting to "http://127.0.0.1:38080/"

rlm_rest (rest): Opening additional connection (2), 1 of 30 pending slots used

rlm_rest (rest): Connecting to "http://127.0.0.1:38080/"

rlm_rest (rest): Opening additional connection (3), 1 of 29 pending slots used

rlm_rest (rest): Connecting to "http://127.0.0.1:38080/"

rlm_rest (rest): Opening additional connection (4), 1 of 28 pending slots used

rlm_rest (rest): Connecting to "http://127.0.0.1:38080/"

  # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess

reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups

reading pairlist file /etc/freeradius/mods-config/preprocess/hints

 } # modules

radiusd: #### Loading Virtual Servers ####

server { # from file /etc/freeradius/radiusd.conf

} # server

server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel

 # Loading authenticate {...}

 # Loading authorize {...}

Ignoring "sql" (see raddb/mods-available/README.rst)

Ignoring "ldap" (see raddb/mods-available/README.rst)

 # Loading session {...}

 # Loading post-proxy {...}

 # Loading post-auth {...}

 # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/sites-enabled/inner-tunnel:336

} # server inner-tunnel

server default { # from file /etc/freeradius/sites-enabled/default

 # Loading authenticate {...}

 # Loading authorize {...}

 # Loading preacct {...}

 # Loading accounting {...}

 # Loading post-proxy {...}

 # Loading post-auth {...}

} # server default

radiusd: #### Opening IP addresses and Ports ####

listen {

  type = "auth"

  ipaddr = 127.0.0.1

  port = 18120

}

listen {

  type = "auth"

  ipaddr = *

  port = 0

   limit {

    max_connections = 16

    lifetime = 0

    idle_timeout = 30

   }

}

listen {

  type = "acct"

  ipaddr = *

  port = 0

   limit {

    max_connections = 16

    lifetime = 0

    idle_timeout = 30

   }

}

listen {

  type = "auth"

  ipv6addr = ::

  port = 0

   limit {

    max_connections = 16

    lifetime = 0

    idle_timeout = 30

   }

}

listen {

  type = "acct"

  ipv6addr = ::

  port = 0

   limit {

    max_connections = 16

    lifetime = 0

    idle_timeout = 30

   }

}

Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel

Listening on auth address * port 1812 bound to server default

Listening on acct address * port 1813 bound to server default

Listening on auth address :: port 1812 bound to server default

Listening on acct address :: port 1813 bound to server default

Listening on proxy address * port 44631

Listening on proxy address :: port 58994

Ready to process requests

(0) Received Access-Request Id 249 from 71.179.189.96:48929 to 172.31.26.65:1812 length 176

(0)   User-Name = "testuser"

(0)   NAS-IP-Address = 127.0.0.1

(0)   Called-Station-Id = "02-F0-21-36-26-62:radtest"

(0)   NAS-Port-Type = Wireless-802.11

(0)   NAS-Port = 1

(0)   Calling-Station-Id = "FC-DB-B3-D8-B2-A9"

(0)   Connect-Info = "CONNECT 54Mbps 802.11a"

(0)   Acct-Session-Id = "5A70EF5F-00000011"

(0)   Framed-MTU = 1400

(0)   EAP-Message = 0x0262000d017465737475736572

(0)   Message-Authenticator = 0x23bb14913ffb5879b4329a47225818a4

(0) # Executing section authorize from file /etc/freeradius/sites-enabled/default

(0)   authorize {

(0)     policy filter_username {

(0)       if (&User-Name) {

(0)       if (&User-Name)  -> TRUE

(0)       if (&User-Name)  {

(0)         if (&User-Name =~ / /) {

(0)         if (&User-Name =~ / /)  -> FALSE

(0)         if (&User-Name =~ /@[^@]*@/ ) {

(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(0)         if (&User-Name =~ /\.\./ ) {

(0)         if (&User-Name =~ /\.\./ )  -> FALSE

(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(0)         if (&User-Name =~ /\.$/)  {

(0)         if (&User-Name =~ /\.$/)   -> FALSE

(0)         if (&User-Name =~ /@\./)  {

(0)         if (&User-Name =~ /@\./)   -> FALSE

(0)       } # if (&User-Name)  = notfound

(0)     } # policy filter_username = notfound

(0)     [preprocess] = ok

(0) eap: Peer sent EAP Response (code 2) ID 98 length 13

(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize

(0)     [eap] = ok

(0)   } # authorize = ok

(0) Found Auth-Type = eap

(0) # Executing group from file /etc/freeradius/sites-enabled/default

(0)   authenticate {

(0) eap: Peer sent packet with method EAP Identity (1)

(0) eap: Calling submodule eap_md5 to process data

(0) eap_md5: Issuing MD5 Challenge

(0) eap: Sending EAP Request (code 1) ID 99 length 22

(0) eap: EAP session adding &reply:State = 0x041b6c1504786825

(0)     [eap] = handled

(0)   } # authenticate = handled

(0) Using Post-Auth-Type Challenge

(0) # Executing group from file /etc/freeradius/sites-enabled/default

(0)   Challenge { ... } # empty sub-section is ignored

(0) Sent Access-Challenge Id 249 from 172.31.26.65:1812 to 71.179.189.96:48929 length 0

(0)   EAP-Message = 0x016300160410991f6be4ceaaa426886a0cd74f51bbb2

(0)   Message-Authenticator = 0x00000000000000000000000000000000

(0)   State = 0x041b6c1504786825023c3d5d8ec03057

(0) Finished request

Waking up in 4.9 seconds.

(1) Received Access-Request Id 250 from 71.179.189.96:48929 to 172.31.26.65:1812 length 187

(1)   User-Name = "testuser"

(1)   NAS-IP-Address = 127.0.0.1

(1)   Called-Station-Id = "02-F0-21-36-26-62:radtest"

(1)   NAS-Port-Type = Wireless-802.11

(1)   NAS-Port = 1

(1)   Calling-Station-Id = "FC-DB-B3-D8-B2-A9"

(1)   Connect-Info = "CONNECT 54Mbps 802.11a"

(1)   Acct-Session-Id = "5A70EF5F-00000011"

(1)   Framed-MTU = 1400

(1)   EAP-Message = 0x026300060319

(1)   State = 0x041b6c1504786825023c3d5d8ec03057

(1)   Message-Authenticator = 0xdfdf2dfff6dfc268746fefbf7ef085d7

(1) session-state: No cached attributes

(1) # Executing section authorize from file /etc/freeradius/sites-enabled/default

(1)   authorize {

(1)     policy filter_username {

(1)       if (&User-Name) {

(1)       if (&User-Name)  -> TRUE

(1)       if (&User-Name)  {

(1)         if (&User-Name =~ / /) {

(1)         if (&User-Name =~ / /)  -> FALSE

(1)         if (&User-Name =~ /@[^@]*@/ ) {

(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(1)         if (&User-Name =~ /\.\./ ) {

(1)         if (&User-Name =~ /\.\./ )  -> FALSE

(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(1)         if (&User-Name =~ /\.$/)  {

(1)         if (&User-Name =~ /\.$/)   -> FALSE

(1)         if (&User-Name =~ /@\./)  {

(1)         if (&User-Name =~ /@\./)   -> FALSE

(1)       } # if (&User-Name)  = notfound

(1)     } # policy filter_username = notfound

(1)     [preprocess] = ok

(1) eap: Peer sent EAP Response (code 2) ID 99 length 6

(1) eap: No EAP Start, assuming it's an on-going EAP conversation

(1)     [eap] = updated

(1)     [expiration] = noop

(1)     [logintime] = noop

(1) pap: WARNING: No "known good" password found for the user.  Not setting Auth-Type

(1) pap: WARNING: Authentication will fail unless a "known good" password is available

(1)     [pap] = noop

(1)   } # authorize = updated

(1) Found Auth-Type = eap

(1) # Executing group from file /etc/freeradius/sites-enabled/default

(1)   authenticate {

(1) eap: Expiring EAP session with state 0x041b6c1504786825

(1) eap: Finished EAP session with state 0x041b6c1504786825

(1) eap: Previous EAP request found for state 0x041b6c1504786825, released from the list

(1) eap: Peer sent packet with method EAP NAK (3)

(1) eap: Found mutually acceptable type PEAP (25)

(1) eap: Calling submodule eap_peap to process data

(1) eap_peap: Initiating new EAP-TLS session

(1) eap_peap: [eaptls start] = request

(1) eap: Sending EAP Request (code 1) ID 100 length 6

(1) eap: EAP session adding &reply:State = 0x041b6c15057f7525

(1)     [eap] = handled

(1)   } # authenticate = handled

(1) Using Post-Auth-Type Challenge

(1) # Executing group from file /etc/freeradius/sites-enabled/default

(1)   Challenge { ... } # empty sub-section is ignored

(1) Sent Access-Challenge Id 250 from 172.31.26.65:1812 to 71.179.189.96:48929 length 0

(1)   EAP-Message = 0x016400061920

(1)   Message-Authenticator = 0x00000000000000000000000000000000

(1)   State = 0x041b6c15057f7525023c3d5d8ec03057

(1) Finished request

Waking up in 4.9 seconds.

(2) Received Access-Request Id 251 from 71.179.189.96:48929 to 172.31.26.65:1812 length 356

(2)   User-Name = "testuser"

(2)   NAS-IP-Address = 127.0.0.1

(2)   Called-Station-Id = "02-F0-21-36-26-62:radtest"

(2)   NAS-Port-Type = Wireless-802.11

(2)   NAS-Port = 1

(2)   Calling-Station-Id = "FC-DB-B3-D8-B2-A9"

(2)   Connect-Info = "CONNECT 54Mbps 802.11a"

(2)   Acct-Session-Id = "5A70EF5F-00000011"

(2)   Framed-MTU = 1400

(2)   EAP-Message = 0x026400af1980000000a516030100a00100009c030306feeb60e948c2010910ff80d26459729f284f21506feb0517ba7e9bda585fd800003ec02cc030009fc02bc02f009ecca9cca8c00ac024c014c0280039006bc009c023c013c02700330067c007c011009d009c0035003d002f003c00050004000a01

(2)   State = 0x041b6c15057f7525023c3d5d8ec03057

(2)   Message-Authenticator = 0x1c00c6ba0670d7117d78372097e08763

(2) session-state: No cached attributes

(2) # Executing section authorize from file /etc/freeradius/sites-enabled/default

(2)   authorize {

(2)     policy filter_username {

(2)       if (&User-Name) {

(2)       if (&User-Name)  -> TRUE

(2)       if (&User-Name)  {

(2)         if (&User-Name =~ / /) {

(2)         if (&User-Name =~ / /)  -> FALSE

(2)         if (&User-Name =~ /@[^@]*@/ ) {

(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(2)         if (&User-Name =~ /\.\./ ) {

(2)         if (&User-Name =~ /\.\./ )  -> FALSE

(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(2)         if (&User-Name =~ /\.$/)  {

(2)         if (&User-Name =~ /\.$/)   -> FALSE

(2)         if (&User-Name =~ /@\./)  {

(2)         if (&User-Name =~ /@\./)   -> FALSE

(2)       } # if (&User-Name)  = notfound

(2)     } # policy filter_username = notfound

(2)     [preprocess] = ok

(2) eap: Peer sent EAP Response (code 2) ID 100 length 175

(2) eap: Continuing tunnel setup

(2)     [eap] = ok

(2)   } # authorize = ok

(2) Found Auth-Type = eap

(2) # Executing group from file /etc/freeradius/sites-enabled/default

(2)   authenticate {

(2) eap: Expiring EAP session with state 0x041b6c15057f7525

(2) eap: Finished EAP session with state 0x041b6c15057f7525

(2) eap: Previous EAP request found for state 0x041b6c15057f7525, released from the list

(2) eap: Peer sent packet with method EAP PEAP (25)

(2) eap: Calling submodule eap_peap to process data

(2) eap_peap: Continuing EAP-TLS

(2) eap_peap: Peer indicated complete TLS record size will be 165 bytes

(2) eap_peap: Got complete TLS record (165 bytes)

(2) eap_peap: [eaptls verify] = length included

(2) eap_peap: (other): before/accept initialization

(2) eap_peap: TLS_accept: before/accept initialization

(2) eap_peap: <<< recv TLS 1.2  [length 00a0]

(2) eap_peap: TLS_accept: SSLv3 read client hello A

(2) eap_peap: >>> send TLS 1.2  [length 0039]

(2) eap_peap: TLS_accept: SSLv3 write server hello A

(2) eap_peap: >>> send TLS 1.2  [length 08d3]

(2) eap_peap: TLS_accept: SSLv3 write certificate A

(2) eap_peap: >>> send TLS 1.2  [length 014d]

(2) eap_peap: TLS_accept: SSLv3 write key exchange A

(2) eap_peap: >>> send TLS 1.2  [length 0004]

(2) eap_peap: TLS_accept: SSLv3 write server done A

(2) eap_peap: TLS_accept: SSLv3 flush data

(2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A

(2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A

(2) eap_peap: In SSL Handshake Phase

(2) eap_peap: In SSL Accept mode

(2) eap_peap: [eaptls process] = handled

(2) eap: Sending EAP Request (code 1) ID 101 length 1004

(2) eap: EAP session adding &reply:State = 0x041b6c15067e7525

(2)     [eap] = handled

(2)   } # authenticate = handled

(2) Using Post-Auth-Type Challenge

(2) # Executing group from file /etc/freeradius/sites-enabled/default

(2)   Challenge { ... } # empty sub-section is ignored

(2) Sent Access-Challenge Id 251 from 172.31.26.65:1812 to 71.179.189.96:48929 length 0

(2)   EAP-Message = 0x016503ec19c000000a71160303003902000035030368762ddf8ad2c608b3d460b47c93a01a3715aa614d91420362cf29df245002c100c03000000dff01000100000b00040300010216030308d30b0008cf0008cc0003de308203da308202c2a003020102020101300d06092a864886f70d01010b050030

(2)   Message-Authenticator = 0x00000000000000000000000000000000

(2)   State = 0x041b6c15067e7525023c3d5d8ec03057

(2) Finished request

Waking up in 4.8 seconds.

(3) Received Access-Request Id 252 from 71.179.189.96:48929 to 172.31.26.65:1812 length 187

(3)   User-Name = "testuser"

(3)   NAS-IP-Address = 127.0.0.1

(3)   Called-Station-Id = "02-F0-21-36-26-62:radtest"

(3)   NAS-Port-Type = Wireless-802.11

(3)   NAS-Port = 1

(3)   Calling-Station-Id = "FC-DB-B3-D8-B2-A9"

(3)   Connect-Info = "CONNECT 54Mbps 802.11a"

(3)   Acct-Session-Id = "5A70EF5F-00000011"

(3)   Framed-MTU = 1400

(3)   EAP-Message = 0x026500061900

(3)   State = 0x041b6c15067e7525023c3d5d8ec03057

(3)   Message-Authenticator = 0xd46cf05dde9a865a6f44898699db503c

(3) session-state: No cached attributes

(3) # Executing section authorize from file /etc/freeradius/sites-enabled/default

(3)   authorize {

(3)     policy filter_username {

(3)       if (&User-Name) {

(3)       if (&User-Name)  -> TRUE

(3)       if (&User-Name)  {

(3)         if (&User-Name =~ / /) {

(3)         if (&User-Name =~ / /)  -> FALSE

(3)         if (&User-Name =~ /@[^@]*@/ ) {

(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(3)         if (&User-Name =~ /\.\./ ) {

(3)         if (&User-Name =~ /\.\./ )  -> FALSE

(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(3)         if (&User-Name =~ /\.$/)  {

(3)         if (&User-Name =~ /\.$/)   -> FALSE

(3)         if (&User-Name =~ /@\./)  {

(3)         if (&User-Name =~ /@\./)   -> FALSE

(3)       } # if (&User-Name)  = notfound

(3)     } # policy filter_username = notfound

(3)     [preprocess] = ok

(3) eap: Peer sent EAP Response (code 2) ID 101 length 6

(3) eap: Continuing tunnel setup

(3)     [eap] = ok

(3)   } # authorize = ok

(3) Found Auth-Type = eap

(3) # Executing group from file /etc/freeradius/sites-enabled/default

(3)   authenticate {

(3) eap: Expiring EAP session with state 0x041b6c15067e7525

(3) eap: Finished EAP session with state 0x041b6c15067e7525

(3) eap: Previous EAP request found for state 0x041b6c15067e7525, released from the list

(3) eap: Peer sent packet with method EAP PEAP (25)

(3) eap: Calling submodule eap_peap to process data

(3) eap_peap: Continuing EAP-TLS

(3) eap_peap: Peer ACKed our handshake fragment

(3) eap_peap: [eaptls verify] = request

(3) eap_peap: [eaptls process] = handled

(3) eap: Sending EAP Request (code 1) ID 102 length 1000

(3) eap: EAP session adding &reply:State = 0x041b6c15077d7525

(3)     [eap] = handled

(3)   } # authenticate = handled

(3) Using Post-Auth-Type Challenge

(3) # Executing group from file /etc/freeradius/sites-enabled/default

(3)   Challenge { ... } # empty sub-section is ignored

(3) Sent Access-Challenge Id 252 from 172.31.26.65:1812 to 71.179.189.96:48929 length 0

(3)   EAP-Message = 0x016603e81940cde3f324ca249bedabd066119c681a573d117ea3022864366f480c80fa575ab23d705108c00198dba38d7f1c53bc178f86b8b688ef094e68e014e70acd43e2430c1bebdb6603f5d4fe0004e8308204e4308203cca0030201020209008e86baf6e55a51bd300d06092a864886f70d01010b

(3)   Message-Authenticator = 0x00000000000000000000000000000000

(3)   State = 0x041b6c15077d7525023c3d5d8ec03057

(3) Finished request

Waking up in 4.7 seconds.

(4) Received Access-Request Id 253 from 71.179.189.96:48929 to 172.31.26.65:1812 length 187

(4)   User-Name = "testuser"

(4)   NAS-IP-Address = 127.0.0.1

(4)   Called-Station-Id = "02-F0-21-36-26-62:radtest"

(4)   NAS-Port-Type = Wireless-802.11

(4)   NAS-Port = 1

(4)   Calling-Station-Id = "FC-DB-B3-D8-B2-A9"

(4)   Connect-Info = "CONNECT 54Mbps 802.11a"

(4)   Acct-Session-Id = "5A70EF5F-00000011"

(4)   Framed-MTU = 1400

(4)   EAP-Message = 0x026600061900

(4)   State = 0x041b6c15077d7525023c3d5d8ec03057

(4)   Message-Authenticator = 0x96bddec172376a3325418b922ca65f3a

(4) session-state: No cached attributes

(4) # Executing section authorize from file /etc/freeradius/sites-enabled/default

(4)   authorize {

(4)     policy filter_username {

(4)       if (&User-Name) {

(4)       if (&User-Name)  -> TRUE

(4)       if (&User-Name)  {

(4)         if (&User-Name =~ / /) {

(4)         if (&User-Name =~ / /)  -> FALSE

(4)         if (&User-Name =~ /@[^@]*@/ ) {

(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(4)         if (&User-Name =~ /\.\./ ) {

(4)         if (&User-Name =~ /\.\./ )  -> FALSE

(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(4)         if (&User-Name =~ /\.$/)  {

(4)         if (&User-Name =~ /\.$/)   -> FALSE

(4)         if (&User-Name =~ /@\./)  {

(4)         if (&User-Name =~ /@\./)   -> FALSE

(4)       } # if (&User-Name)  = notfound

(4)     } # policy filter_username = notfound

(4)     [preprocess] = ok

(4) eap: Peer sent EAP Response (code 2) ID 102 length 6

(4) eap: Continuing tunnel setup

(4)     [eap] = ok

(4)   } # authorize = ok

(4) Found Auth-Type = eap

(4) # Executing group from file /etc/freeradius/sites-enabled/default

(4)   authenticate {

(4) eap: Expiring EAP session with state 0x041b6c15077d7525

(4) eap: Finished EAP session with state 0x041b6c15077d7525

(4) eap: Previous EAP request found for state 0x041b6c15077d7525, released from the list

(4) eap: Peer sent packet with method EAP PEAP (25)

(4) eap: Calling submodule eap_peap to process data

(4) eap_peap: Continuing EAP-TLS

(4) eap_peap: Peer ACKed our handshake fragment

(4) eap_peap: [eaptls verify] = request

(4) eap_peap: [eaptls process] = handled

(4) eap: Sending EAP Request (code 1) ID 103 length 691

(4) eap: EAP session adding &reply:State = 0x041b6c15007c7525

(4)     [eap] = handled

(4)   } # authenticate = handled

(4) Using Post-Auth-Type Challenge

(4) # Executing group from file /etc/freeradius/sites-enabled/default

(4)   Challenge { ... } # empty sub-section is ignored

(4) Sent Access-Challenge Id 253 from 172.31.26.65:1812 to 71.179.189.96:48929 length 0

(4)   EAP-Message = 0x016702b319000530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b05000382010100369b3dc157df2fc2d04eb9f9e4641dfcaf1bc39da12fb47b6e4b70629434ab

(4)   Message-Authenticator = 0x00000000000000000000000000000000

(4)   State = 0x041b6c15007c7525023c3d5d8ec03057

(4) Finished request

Waking up in 4.6 seconds.

(5) Received Access-Request Id 254 from 71.179.189.96:48929 to 172.31.26.65:1812 length 317

(5)   User-Name = "testuser"

(5)   NAS-IP-Address = 127.0.0.1

(5)   Called-Station-Id = "02-F0-21-36-26-62:radtest"

(5)   NAS-Port-Type = Wireless-802.11

(5)   NAS-Port = 1

(5)   Calling-Station-Id = "FC-DB-B3-D8-B2-A9"

(5)   Connect-Info = "CONNECT 54Mbps 802.11a"

(5)   Acct-Session-Id = "5A70EF5F-00000011"

(5)   Framed-MTU = 1400

(5)   EAP-Message = 0x0267008819800000007e1603030046100000424104efbf2a3d048ae3e88e11f7ef4880365705a9817185f70c0fe9973c848a6f2ca07b45d616190bcf93f41e232a5e97477c0cdcc5f6d8c72f15001b0447763db7a71403030001011603030028000000000000000064d335a11a027376b57b84aca00132

(5)   State = 0x041b6c15007c7525023c3d5d8ec03057

(5)   Message-Authenticator = 0x1be28f5681201b7e839ff13a6beea0d1

(5) session-state: No cached attributes

(5) # Executing section authorize from file /etc/freeradius/sites-enabled/default

(5)   authorize {

(5)     policy filter_username {

(5)       if (&User-Name) {

(5)       if (&User-Name)  -> TRUE

(5)       if (&User-Name)  {

(5)         if (&User-Name =~ / /) {

(5)         if (&User-Name =~ / /)  -> FALSE

(5)         if (&User-Name =~ /@[^@]*@/ ) {

(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(5)         if (&User-Name =~ /\.\./ ) {

(5)         if (&User-Name =~ /\.\./ )  -> FALSE

(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(5)         if (&User-Name =~ /\.$/)  {

(5)         if (&User-Name =~ /\.$/)   -> FALSE

(5)         if (&User-Name =~ /@\./)  {

(5)         if (&User-Name =~ /@\./)   -> FALSE

(5)       } # if (&User-Name)  = notfound

(5)     } # policy filter_username = notfound

(5)     [preprocess] = ok

(5) eap: Peer sent EAP Response (code 2) ID 103 length 136

(5) eap: Continuing tunnel setup

(5)     [eap] = ok

(5)   } # authorize = ok

(5) Found Auth-Type = eap

(5) # Executing group from file /etc/freeradius/sites-enabled/default

(5)   authenticate {

(5) eap: Expiring EAP session with state 0x041b6c15007c7525

(5) eap: Finished EAP session with state 0x041b6c15007c7525

(5) eap: Previous EAP request found for state 0x041b6c15007c7525, released from the list

(5) eap: Peer sent packet with method EAP PEAP (25)

(5) eap: Calling submodule eap_peap to process data

(5) eap_peap: Continuing EAP-TLS

(5) eap_peap: Peer indicated complete TLS record size will be 126 bytes

(5) eap_peap: Got complete TLS record (126 bytes)

(5) eap_peap: [eaptls verify] = length included

(5) eap_peap: <<< recv TLS 1.2  [length 0046]

(5) eap_peap: TLS_accept: SSLv3 read client key exchange A

(5) eap_peap: <<< recv TLS 1.2  [length 0001]

(5) eap_peap: <<< recv TLS 1.2  [length 0010]

(5) eap_peap: TLS_accept: SSLv3 read finished A

(5) eap_peap: >>> send TLS 1.2  [length 0001]

(5) eap_peap: TLS_accept: SSLv3 write change cipher spec A

(5) eap_peap: >>> send TLS 1.2  [length 0010]

(5) eap_peap: TLS_accept: SSLv3 write finished A

(5) eap_peap: TLS_accept: SSLv3 flush data

(5) eap_peap: (other): SSL negotiation finished successfully

(5) eap_peap: SSL Connection Established

(5) eap_peap: [eaptls process] = handled

(5) eap: Sending EAP Request (code 1) ID 104 length 57

(5) eap: EAP session adding &reply:State = 0x041b6c1501737525

(5)     [eap] = handled

(5)   } # authenticate = handled

(5) Using Post-Auth-Type Challenge

(5) # Executing group from file /etc/freeradius/sites-enabled/default

(5)   Challenge { ... } # empty sub-section is ignored

(5) Sent Access-Challenge Id 254 from 172.31.26.65:1812 to 71.179.189.96:48929 length 0

(5)   EAP-Message = 0x01680039190014030300010116030300285f6ee4e8a440118e913873fff7f5a910707cc4609ef5e9aeef9f7b7242a350e482da638bf3c07c86

(5)   Message-Authenticator = 0x00000000000000000000000000000000

(5)   State = 0x041b6c1501737525023c3d5d8ec03057

(5) Finished request

Waking up in 4.4 seconds.

(6) Received Access-Request Id 255 from 71.179.189.96:48929 to 172.31.26.65:1812 length 187

(6)   User-Name = "testuser"

(6)   NAS-IP-Address = 127.0.0.1

(6)   Called-Station-Id = "02-F0-21-36-26-62:radtest"

(6)   NAS-Port-Type = Wireless-802.11

(6)   NAS-Port = 1

(6)   Calling-Station-Id = "FC-DB-B3-D8-B2-A9"

(6)   Connect-Info = "CONNECT 54Mbps 802.11a"

(6)   Acct-Session-Id = "5A70EF5F-00000011"

(6)   Framed-MTU = 1400

(6)   EAP-Message = 0x026800061900

(6)   State = 0x041b6c1501737525023c3d5d8ec03057

(6)   Message-Authenticator = 0x4169f50796258cfa8bca5fa8860a6fe8

(6) session-state: No cached attributes

(6) # Executing section authorize from file /etc/freeradius/sites-enabled/default

(6)   authorize {

(6)     policy filter_username {

(6)       if (&User-Name) {

(6)       if (&User-Name)  -> TRUE

(6)       if (&User-Name)  {

(6)         if (&User-Name =~ / /) {

(6)         if (&User-Name =~ / /)  -> FALSE

(6)         if (&User-Name =~ /@[^@]*@/ ) {

(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(6)         if (&User-Name =~ /\.\./ ) {

(6)         if (&User-Name =~ /\.\./ )  -> FALSE

(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(6)         if (&User-Name =~ /\.$/)  {

(6)         if (&User-Name =~ /\.$/)   -> FALSE

(6)         if (&User-Name =~ /@\./)  {

(6)         if (&User-Name =~ /@\./)   -> FALSE

(6)       } # if (&User-Name)  = notfound

(6)     } # policy filter_username = notfound

(6)     [preprocess] = ok

(6) eap: Peer sent EAP Response (code 2) ID 104 length 6

(6) eap: Continuing tunnel setup

(6)     [eap] = ok

(6)   } # authorize = ok

(6) Found Auth-Type = eap

(6) # Executing group from file /etc/freeradius/sites-enabled/default

(6)   authenticate {

(6) eap: Expiring EAP session with state 0x041b6c1501737525

(6) eap: Finished EAP session with state 0x041b6c1501737525

(6) eap: Previous EAP request found for state 0x041b6c1501737525, released from the list

(6) eap: Peer sent packet with method EAP PEAP (25)

(6) eap: Calling submodule eap_peap to process data

(6) eap_peap: Continuing EAP-TLS

(6) eap_peap: Peer ACKed our handshake fragment.  handshake is finished

(6) eap_peap: [eaptls verify] = success

(6) eap_peap: [eaptls process] = success

(6) eap_peap: Session established.  Decoding tunneled attributes

(6) eap_peap: PEAP state TUNNEL ESTABLISHED

(6) eap: Sending EAP Request (code 1) ID 105 length 40

(6) eap: EAP session adding &reply:State = 0x041b6c1502727525

(6)     [eap] = handled

(6)   } # authenticate = handled

(6) Using Post-Auth-Type Challenge

(6) # Executing group from file /etc/freeradius/sites-enabled/default

(6)   Challenge { ... } # empty sub-section is ignored

(6) Sent Access-Challenge Id 255 from 172.31.26.65:1812 to 71.179.189.96:48929 length 0

(6)   EAP-Message = 0x016900281900170303001d5f6ee4e8a440118f6ae961fe58faae37d0308425f3f334891e1669857e

(6)   Message-Authenticator = 0x00000000000000000000000000000000

(6)   State = 0x041b6c1502727525023c3d5d8ec03057

(6) Finished request

Waking up in 4.4 seconds.

(7) Received Access-Request Id 0 from 71.179.189.96:48929 to 172.31.26.65:1812 length 225

(7)   User-Name = "testuser"

(7)   NAS-IP-Address = 127.0.0.1

(7)   Called-Station-Id = "02-F0-21-36-26-62:radtest"

(7)   NAS-Port-Type = Wireless-802.11

(7)   NAS-Port = 1

(7)   Calling-Station-Id = "FC-DB-B3-D8-B2-A9"

(7)   Connect-Info = "CONNECT 54Mbps 802.11a"

(7)   Acct-Session-Id = "5A70EF5F-00000011"

(7)   Framed-MTU = 1400

(7)   EAP-Message = 0x0269002c19001703030021000000000000000178aba074d31f98dbc7c329e6bb4c900e20ec12214c575c9c40

(7)   State = 0x041b6c1502727525023c3d5d8ec03057

(7)   Message-Authenticator = 0x16348adb05cf8664bc16ac2cb7c06bfc

(7) session-state: No cached attributes

(7) # Executing section authorize from file /etc/freeradius/sites-enabled/default

(7)   authorize {

(7)     policy filter_username {

(7)       if (&User-Name) {

(7)       if (&User-Name)  -> TRUE

(7)       if (&User-Name)  {

(7)         if (&User-Name =~ / /) {

(7)         if (&User-Name =~ / /)  -> FALSE

(7)         if (&User-Name =~ /@[^@]*@/ ) {

(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(7)         if (&User-Name =~ /\.\./ ) {

(7)         if (&User-Name =~ /\.\./ )  -> FALSE

(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(7)         if (&User-Name =~ /\.$/)  {

(7)         if (&User-Name =~ /\.$/)   -> FALSE

(7)         if (&User-Name =~ /@\./)  {

(7)         if (&User-Name =~ /@\./)   -> FALSE

(7)       } # if (&User-Name)  = notfound

(7)     } # policy filter_username = notfound

(7)     [preprocess] = ok

(7) eap: Peer sent EAP Response (code 2) ID 105 length 44

(7) eap: Continuing tunnel setup

(7)     [eap] = ok

(7)   } # authorize = ok

(7) Found Auth-Type = eap

(7) # Executing group from file /etc/freeradius/sites-enabled/default

(7)   authenticate {

(7) eap: Expiring EAP session with state 0x041b6c1502727525

(7) eap: Finished EAP session with state 0x041b6c1502727525

(7) eap: Previous EAP request found for state 0x041b6c1502727525, released from the list

(7) eap: Peer sent packet with method EAP PEAP (25)

(7) eap: Calling submodule eap_peap to process data

(7) eap_peap: Continuing EAP-TLS

(7) eap_peap: [eaptls verify] = ok

(7) eap_peap: Done initial handshake

(7) eap_peap: [eaptls process] = ok

(7) eap_peap: Session established.  Decoding tunneled attributes

(7) eap_peap: PEAP state WAITING FOR INNER IDENTITY

(7) eap_peap: Identity - testuser

(7) eap_peap: Got inner identity 'testuser'

(7) eap_peap: Got tunneled request

(7) eap_peap:   EAP-Message = 0x0269000d017465737475736572

(7) eap_peap: Setting User-Name to testuser

(7) eap_peap: Sending tunneled request to inner-tunnel

(7) eap_peap:   EAP-Message = 0x0269000d017465737475736572

(7) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1

(7) eap_peap:   User-Name = "testuser"

(7) Virtual server inner-tunnel received request

(7)   EAP-Message = 0x0269000d017465737475736572

(7)   FreeRADIUS-Proxied-To = 127.0.0.1

(7)   User-Name = "testuser"

(7) WARNING: Outer and inner identities are the same.  User privacy is compromised.

(7) server inner-tunnel {

(7)   # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel

(7)     authorize {

(7)       policy filter_username {

(7)         if (&User-Name) {

(7)         if (&User-Name)  -> TRUE

(7)         if (&User-Name)  {

(7)           if (&User-Name =~ / /) {

(7)           if (&User-Name =~ / /)  -> FALSE

(7)           if (&User-Name =~ /@[^@]*@/ ) {

(7)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(7)           if (&User-Name =~ /\.\./ ) {

(7)           if (&User-Name =~ /\.\./ )  -> FALSE

(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(7)           if (&User-Name =~ /\.$/)  {

(7)           if (&User-Name =~ /\.$/)   -> FALSE

(7)           if (&User-Name =~ /@\./)  {

(7)           if (&User-Name =~ /@\./)   -> FALSE

(7)         } # if (&User-Name)  = notfound

(7)       } # policy filter_username = notfound

rlm_rest (rest): Reserved connection (0)

(7) rest: Expanding URI components

(7) rest: EXPAND http://127.0.0.1:38080

(7) rest:    --> http://127.0.0.1:38080

(7) rest: EXPAND /?user=%{User-Name}&mac=%{Called-Station-ID}&action=authorize

(7) rest:    --> /?user=testuser&mac=&action=authorize

(7) rest: Sending HTTP GET to "http://127.0.0.1:38080/?user=testuser&mac=&action=authorize"

(7) rest: Processing response header

(7) rest:   Status : 200 (OK)

(7) rest: Parsing attribute "Cleartext-Password"

(7) rest: EXPAND xxx

(7) rest:    --> xxx

(7) rest: Cleartext-Password := "xxx"

rlm_rest (rest): Released connection (0)

Need 5 more connections to reach 10 spares

rlm_rest (rest): Opening additional connection (5), 1 of 27 pending slots used

rlm_rest (rest): Connecting to "http://127.0.0.1:38080/"

(7)       [rest] = updated

(7) suffix: Checking for suffix after "@"

(7) suffix: No '@' in User-Name = "testuser", looking up realm NULL

(7) suffix: No such realm "NULL"

(7)       [suffix] = noop

(7)       update control {

(7)         &Proxy-To-Realm := LOCAL

(7)       } # update control = noop

(7) eap: Peer sent EAP Response (code 2) ID 105 length 13

(7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize

(7)       [eap] = ok

(7)     } # authorize = ok

(7)   Found Auth-Type = eap

(7)   # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel

(7)     authenticate {

(7) eap: Peer sent packet with method EAP Identity (1)

(7) eap: Calling submodule eap_md5 to process data

(7) eap_md5: Issuing MD5 Challenge

(7) eap: Sending EAP Request (code 1) ID 106 length 22

(7) eap: EAP session adding &reply:State = 0x7c4023477c2a2753

(7)       [eap] = handled

(7)     } # authenticate = handled

(7) } # server inner-tunnel

(7) Virtual server sending reply

(7)   Cleartext-Password = "xxx"

(7)   EAP-Message = 0x016a00160410e411cdc5114ec10697a41831bfe62c70

(7)   Message-Authenticator = 0x00000000000000000000000000000000

(7)   State = 0x7c4023477c2a2753eb67ed055b591745

(7) eap_peap: Got tunneled reply code 11

(7) eap_peap:   Cleartext-Password = "xxx"

(7) eap_peap:   EAP-Message = 0x016a00160410e411cdc5114ec10697a41831bfe62c70

(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000

(7) eap_peap:   State = 0x7c4023477c2a2753eb67ed055b591745

(7) eap_peap: Got tunneled reply RADIUS code 11

(7) eap_peap:   Cleartext-Password = "xxx"

(7) eap_peap:   EAP-Message = 0x016a00160410e411cdc5114ec10697a41831bfe62c70

(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000

(7) eap_peap:   State = 0x7c4023477c2a2753eb67ed055b591745

(7) eap_peap: Got tunneled Access-Challenge

(7) eap: Sending EAP Request (code 1) ID 106 length 53

(7) eap: EAP session adding &reply:State = 0x041b6c1503717525

(7)     [eap] = handled

(7)   } # authenticate = handled

(7) Using Post-Auth-Type Challenge

(7) # Executing group from file /etc/freeradius/sites-enabled/default

(7)   Challenge { ... } # empty sub-section is ignored

(7) Sent Access-Challenge Id 0 from 172.31.26.65:1812 to 71.179.189.96:48929 length 0

(7)   EAP-Message = 0x016a00351900170303002a5f6ee4e8a4401190f69b2bd50aa115d064d762249cbeba5a84a5b06f3602e7482572c4a43aee36706c07

(7)   Message-Authenticator = 0x00000000000000000000000000000000

(7)   State = 0x041b6c1503717525023c3d5d8ec03057

(7) Finished request

Waking up in 4.3 seconds.

(8) Received Access-Request Id 1 from 71.179.189.96:48929 to 172.31.26.65:1812 length 234

(8)   User-Name = "testuser"

(8)   NAS-IP-Address = 127.0.0.1

(8)   Called-Station-Id = "02-F0-21-36-26-62:radtest"

(8)   NAS-Port-Type = Wireless-802.11

(8)   NAS-Port = 1

(8)   Calling-Station-Id = "FC-DB-B3-D8-B2-A9"

(8)   Connect-Info = "CONNECT 54Mbps 802.11a"

(8)   Acct-Session-Id = "5A70EF5F-00000011"

(8)   Framed-MTU = 1400

(8)   EAP-Message = 0x026a00351900170303002a00000000000000027af6e11e273623fa87fe0fdbda98e68a8af862d57fad52cb240c8790db90b1bd8018

(8)   State = 0x041b6c1503717525023c3d5d8ec03057

(8)   Message-Authenticator = 0xe87e4305d6a5725d5eeb709549e46506

(8) session-state: No cached attributes

(8) # Executing section authorize from file /etc/freeradius/sites-enabled/default

(8)   authorize {

(8)     policy filter_username {

(8)       if (&User-Name) {

(8)       if (&User-Name)  -> TRUE

(8)       if (&User-Name)  {

(8)         if (&User-Name =~ / /) {

(8)         if (&User-Name =~ / /)  -> FALSE

(8)         if (&User-Name =~ /@[^@]*@/ ) {

(8)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(8)         if (&User-Name =~ /\.\./ ) {

(8)         if (&User-Name =~ /\.\./ )  -> FALSE

(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(8)         if (&User-Name =~ /\.$/)  {

(8)         if (&User-Name =~ /\.$/)   -> FALSE

(8)         if (&User-Name =~ /@\./)  {

(8)         if (&User-Name =~ /@\./)   -> FALSE

(8)       } # if (&User-Name)  = notfound

(8)     } # policy filter_username = notfound

(8)     [preprocess] = ok

(8) eap: Peer sent EAP Response (code 2) ID 106 length 53

(8) eap: Continuing tunnel setup

(8)     [eap] = ok

(8)   } # authorize = ok

(8) Found Auth-Type = eap

(8) # Executing group from file /etc/freeradius/sites-enabled/default

(8)   authenticate {

(8) eap: Expiring EAP session with state 0x7c4023477c2a2753

(8) eap: Finished EAP session with state 0x041b6c1503717525

(8) eap: Previous EAP request found for state 0x041b6c1503717525, released from the list

(8) eap: Peer sent packet with method EAP PEAP (25)

(8) eap: Calling submodule eap_peap to process data

(8) eap_peap: Continuing EAP-TLS

(8) eap_peap: [eaptls verify] = ok

(8) eap_peap: Done initial handshake

(8) eap_peap: [eaptls process] = ok

(8) eap_peap: Session established.  Decoding tunneled attributes

(8) eap_peap: PEAP state phase2

(8) eap_peap: EAP method MD5 (4)

(8) eap_peap: Got tunneled request

(8) eap_peap:   EAP-Message = 0x026a00160410052730cd2ce584de9f0445db7f81eb23

(8) eap_peap: Setting User-Name to testuser

(8) eap_peap: Sending tunneled request to inner-tunnel

(8) eap_peap:   EAP-Message = 0x026a00160410052730cd2ce584de9f0445db7f81eb23

(8) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1

(8) eap_peap:   User-Name = "testuser"

(8) eap_peap:   State = 0x7c4023477c2a2753eb67ed055b591745

(8) Virtual server inner-tunnel received request

(8)   EAP-Message = 0x026a00160410052730cd2ce584de9f0445db7f81eb23

(8)   FreeRADIUS-Proxied-To = 127.0.0.1

(8)   User-Name = "testuser"

(8)   State = 0x7c4023477c2a2753eb67ed055b591745

(8) WARNING: Outer and inner identities are the same.  User privacy is compromised.

(8) server inner-tunnel {

(8)   session-state: No cached attributes

(8)   # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel

(8)     authorize {

(8)       policy filter_username {

(8)         if (&User-Name) {

(8)         if (&User-Name)  -> TRUE

(8)         if (&User-Name)  {

(8)           if (&User-Name =~ / /) {

(8)           if (&User-Name =~ / /)  -> FALSE

(8)           if (&User-Name =~ /@[^@]*@/ ) {

(8)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(8)           if (&User-Name =~ /\.\./ ) {

(8)           if (&User-Name =~ /\.\./ )  -> FALSE

(8)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(8)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(8)           if (&User-Name =~ /\.$/)  {

(8)           if (&User-Name =~ /\.$/)   -> FALSE

(8)           if (&User-Name =~ /@\./)  {

(8)           if (&User-Name =~ /@\./)   -> FALSE

(8)         } # if (&User-Name)  = notfound

(8)       } # policy filter_username = notfound

rlm_rest (rest): Reserved connection (1)

(8) rest: Expanding URI components

(8) rest: EXPAND http://127.0.0.1:38080

(8) rest:    --> http://127.0.0.1:38080

(8) rest: EXPAND /?user=%{User-Name}&mac=%{Called-Station-ID}&action=authorize

(8) rest:    --> /?user=testuser&mac=&action=authorize

(8) rest: Sending HTTP GET to "http://127.0.0.1:38080/?user=testuser&mac=&action=authorize"

(8) rest: Processing response header

(8) rest:   Status : 200 (OK)

(8) rest: Parsing attribute "Cleartext-Password"

(8) rest: EXPAND xxx

(8) rest:    --> xxx

(8) rest: Cleartext-Password := "xxx"

rlm_rest (rest): Released connection (1)

(8)       [rest] = updated

(8) suffix: Checking for suffix after "@"

(8) suffix: No '@' in User-Name = "testuser", looking up realm NULL

(8) suffix: No such realm "NULL"

(8)       [suffix] = noop

(8)       update control {

(8)         &Proxy-To-Realm := LOCAL

(8)       } # update control = noop

(8) eap: Peer sent EAP Response (code 2) ID 106 length 22

(8) eap: No EAP Start, assuming it's an on-going EAP conversation

(8)       [eap] = updated

(8)       [files] = noop

(8)       [expiration] = noop

(8)       [logintime] = noop

(8)       [pap] = noop

(8)     } # authorize = updated

(8)   Found Auth-Type = eap

(8)   # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel

(8)     authenticate {

(8) eap: Expiring EAP session with state 0x7c4023477c2a2753

(8) eap: Finished EAP session with state 0x7c4023477c2a2753

(8) eap: Previous EAP request found for state 0x7c4023477c2a2753, released from the list

(8) eap: Peer sent packet with method EAP MD5 (4)

(8) eap: Calling submodule eap_md5 to process data

(8) eap_md5: ERROR: Cleartext-Password is required for EAP-MD5 authentication

(8) eap: ERROR: Failed continuing EAP MD5 (4) session.  EAP sub-module failed

(8) eap: Sending EAP Failure (code 4) ID 106 length 4

(8) eap: Failed in EAP select

(8)       [eap] = invalid

(8)     } # authenticate = invalid

(8)   Failed to authenticate the user

(8)   Using Post-Auth-Type Reject

(8)   # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel

(8)     Post-Auth-Type REJECT {

(8) attr_filter.access_reject: EXPAND %{User-Name}

(8) attr_filter.access_reject:    --> testuser

(8) attr_filter.access_reject: Matched entry DEFAULT at line 11

(8)       [attr_filter.access_reject] = updated

(8)       update outer.session-state {

(8)         &Module-Failure-Message := &request:Module-Failure-Message -> 'eap_md5: Cleartext-Password is required for EAP-MD5 authentication'

(8)       } # update outer.session-state = noop

(8)     } # Post-Auth-Type REJECT = updated

(8) } # server inner-tunnel

(8) Virtual server sending reply

(8)   EAP-Message = 0x046a0004

(8)   Message-Authenticator = 0x00000000000000000000000000000000

(8) eap_peap: Got tunneled reply code 3

(8) eap_peap:   EAP-Message = 0x046a0004

(8) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000

(8) eap_peap: Got tunneled reply RADIUS code 3

(8) eap_peap:   EAP-Message = 0x046a0004

(8) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000

(8) eap_peap: Tunneled authentication was rejected

(8) eap_peap: FAILURE

(8) eap: Sending EAP Request (code 1) ID 107 length 46

(8) eap: EAP session adding &reply:State = 0x041b6c150c707525

(8)     [eap] = handled

(8)   } # authenticate = handled

(8) Using Post-Auth-Type Challenge

(8) # Executing group from file /etc/freeradius/sites-enabled/default

(8)   Challenge { ... } # empty sub-section is ignored

(8) session-state: Saving cached attributes

(8)   Module-Failure-Message := "eap_md5: Cleartext-Password is required for EAP-MD5 authentication"

(8) Sent Access-Challenge Id 1 from 172.31.26.65:1812 to 71.179.189.96:48929 length 0

(8)   EAP-Message = 0x016b002e190017030300235f6ee4e8a440119139940b79ea1039c16821646a4b93ea204b5ecfc784a1434fdee304

(8)   Message-Authenticator = 0x00000000000000000000000000000000

(8)   State = 0x041b6c150c707525023c3d5d8ec03057

(8) Finished request

Waking up in 4.2 seconds.

(9) Received Access-Request Id 2 from 71.179.189.96:48929 to 172.31.26.65:1812 length 227

(9)   User-Name = "testuser"

(9)   NAS-IP-Address = 127.0.0.1

(9)   Called-Station-Id = "02-F0-21-36-26-62:radtest"

(9)   NAS-Port-Type = Wireless-802.11

(9)   NAS-Port = 1

(9)   Calling-Station-Id = "FC-DB-B3-D8-B2-A9"

(9)   Connect-Info = "CONNECT 54Mbps 802.11a"

(9)   Acct-Session-Id = "5A70EF5F-00000011"

(9)   Framed-MTU = 1400

(9)   EAP-Message = 0x026b002e190017030300230000000000000003c5d0c90e3297625c4dce4a6009e6fc9df299edfa7e2333b12b33a9

(9)   State = 0x041b6c150c707525023c3d5d8ec03057

(9)   Message-Authenticator = 0xa5d529a07b0a2a688e1ececb19906b8c

(9) Restoring &session-state

(9)   &session-state:Module-Failure-Message := "eap_md5: Cleartext-Password is required for EAP-MD5 authentication"

(9) # Executing section authorize from file /etc/freeradius/sites-enabled/default

(9)   authorize {

(9)     policy filter_username {

(9)       if (&User-Name) {

(9)       if (&User-Name)  -> TRUE

(9)       if (&User-Name)  {

(9)         if (&User-Name =~ / /) {

(9)         if (&User-Name =~ / /)  -> FALSE

(9)         if (&User-Name =~ /@[^@]*@/ ) {

(9)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(9)         if (&User-Name =~ /\.\./ ) {

(9)         if (&User-Name =~ /\.\./ )  -> FALSE

(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(9)         if (&User-Name =~ /\.$/)  {

(9)         if (&User-Name =~ /\.$/)   -> FALSE

(9)         if (&User-Name =~ /@\./)  {

(9)         if (&User-Name =~ /@\./)   -> FALSE

(9)       } # if (&User-Name)  = notfound

(9)     } # policy filter_username = notfound

(9)     [preprocess] = ok

(9) eap: Peer sent EAP Response (code 2) ID 107 length 46

(9) eap: Continuing tunnel setup

(9)     [eap] = ok

(9)   } # authorize = ok

(9) Found Auth-Type = eap

(9) # Executing group from file /etc/freeradius/sites-enabled/default

(9)   authenticate {

(9) eap: Expiring EAP session with state 0x041b6c150c707525

(9) eap: Finished EAP session with state 0x041b6c150c707525

(9) eap: Previous EAP request found for state 0x041b6c150c707525, released from the list

(9) eap: Peer sent packet with method EAP PEAP (25)

(9) eap: Calling submodule eap_peap to process data

(9) eap_peap: Continuing EAP-TLS

(9) eap_peap: [eaptls verify] = ok

(9) eap_peap: Done initial handshake

(9) eap_peap: [eaptls process] = ok

(9) eap_peap: Session established.  Decoding tunneled attributes

(9) eap_peap: PEAP state send tlv failure

(9) eap_peap: Received EAP-TLV response

(9) eap_peap:   ERROR: The users session was previously rejected: returning reject (again.)

(9) eap_peap:   This means you need to read the PREVIOUS messages in the debug output

(9) eap_peap:   to find out the reason why the user was rejected

(9) eap_peap:   Look for "reject" or "fail".  Those earlier messages will tell you

(9) eap_peap:   what went wrong, and how to fix the problem

(9) eap: ERROR: Failed continuing EAP PEAP (25) session.  EAP sub-module failed

(9) eap: Sending EAP Failure (code 4) ID 107 length 4

(9) eap: Failed in EAP select

(9)     [eap] = invalid

(9)   } # authenticate = invalid

(9) Failed to authenticate the user

(9) Using Post-Auth-Type Reject

(9) # Executing group from file /etc/freeradius/sites-enabled/default

(9)   Post-Auth-Type REJECT {

(9) attr_filter.access_reject: EXPAND %{User-Name}

(9) attr_filter.access_reject:    --> testuser

(9) attr_filter.access_reject: Matched entry DEFAULT at line 11

(9)     [attr_filter.access_reject] = updated

(9)     [eap] = noop

(9)     policy remove_reply_message_if_eap {

(9)       if (&reply:EAP-Message && &reply:Reply-Message) {

(9)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE

(9)       else {

(9)         [noop] = noop

(9)       } # else = noop

(9)     } # policy remove_reply_message_if_eap = noop

(9)   } # Post-Auth-Type REJECT = updated

(9) Delaying response for 1.000000 seconds

Waking up in 0.3 seconds.

Waking up in 0.6 seconds.

(9) Sending delayed response

(9) Sent Access-Reject Id 2 from 172.31.26.65:1812 to 71.179.189.96:48929 length 44

(9)   EAP-Message = 0x046b0004

(9)   Message-Authenticator = 0x00000000000000000000000000000000

Waking up in 3.1 seconds.

(0) Cleaning up request packet ID 249 with timestamp +43

(1) Cleaning up request packet ID 250 with timestamp +43

(2) Cleaning up request packet ID 251 with timestamp +43

(3) Cleaning up request packet ID 252 with timestamp +43

(4) Cleaning up request packet ID 253 with timestamp +43

Waking up in 0.1 seconds.

(5) Cleaning up request packet ID 254 with timestamp +43

(6) Cleaning up request packet ID 255 with timestamp +44

(7) Cleaning up request packet ID 0 with timestamp +44

(8) Cleaning up request packet ID 1 with timestamp +44

(9) Cleaning up request packet ID 2 with timestamp +44

Ready to process requests

________________________________
From: Freeradius-Users <freeradius-users-bounces+robert.gelinas=sbdinc.com@lists.freeradius.org> on behalf of Matthew Newton <mcn@freeradius.org>
Sent: Tuesday, March 27, 2018 8:00 PM
To: freeradius-users@lists.freeradius.org
Subject: Re: Authentication and Rest

*External Message, please be cautious.*

On Tue, 2018-03-27 at 22:21 +0000, Gelinas, Robert wrote:
...
I have a problem with authenticating after a RESTful auth.  The
response from the rest call seems to be integrating (free radius is
expanding the response), but the Cleartext-Password doesn't seem to
be carrying forward to the authentication portion.
You're calling rest in the outer "default" server.
...
There are a lot more 'authorize/authenticate' call sets than I
expected,
PEAP is like that...
...
but in the end, I expected things to resolve; however, they fail with
'no Cleartext-Password' error message in the MD5 portion.
You haven't got the Cleartest-Password attribute in the inner-tunnel;
it's in the outer.

Move "rest" from the default server to the inner-tunnel virtual server.

You'll also save a lot of load on your REST server by only querying it
once, rather than every EAP round-trip.

--
Matthew

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Support & Services<http://www.freeradius.org/list/users.html>
www.freeradius.org
The world's leading RADIUS server. The project includes a GPL AAA server, BSD licensed client and PAM and Apache modules. Full support is available from NetworkRADIUS.