RE: No connection after access-accept.

19 Oct 2011

      Hi Krzystof,

You need to use the new Alvarion dictionary which is included in the 3.0
version I believe, Alan will undoubtedly correct me.  

In addition you will need to change the TOS range and mask values.  Here is
what I send to set up 1 IPCS flow on an Alvarion 4-Motion ASN.

Alvarion-R3-IF-Name	+=	SGVLAN13
Alvarion-PDFID	+=	1
WiMAX-Packet-Data-Flow-Id	+=	1
WiMAX-Service-Data-Flow-Id	+=	1
WiMAX-Direction	+=	3
WiMAX-Transport-Type	+=	1
WiMAX-Uplink-QOS-Id	+=	1
WiMAX-Downlink-QOS-Id	+=	1
WiMAX-ClassifierID	+=	1
WiMAX-Classifier-Priority	+=	1
WiMAX-Classifier-Direction	+=	1
WiMAX-IP-TOS-DSCP-Range-and-Mask	+=	0x1818FF
WiMAX-Transport-Type	+=	1
WiMAX-ClassifierID	+=	2
WiMAX-Classifier-Priority	+=	1
WiMAX-Classifier-Direction	+=	2
WiMAX-IP-TOS-DSCP-Range-and-Mask	+=	0x0000FF
WiMAX-QoS-Id	+=	1
WiMAX-Schedule-Type	+=	2
WiMAX-Traffic-Priority	+=	1
WiMAX-Maximum-Sustained-Traffic-Rate	+=	256000

David Peterson
Senior WiMax Engineer
Wireless Connections

-----Original Message-----
From:
freeradius-users-bounces+david.peterson=acc-corp.net@lists.freeradius.org
[mailto:freeradius-users-bounces+david.peterson=acc-corp.net@lists.freeradiu
s.org] On Behalf Of Krzysztof Grobelak
Sent: Wednesday, October 19, 2011 11:06 AM
To: FreeRadius users mailing list
Subject: No connection after access-accept.

Hello.

I am trying to configure freeradius to work with Alvarion devices. It is 
working fine with Extreme but for some reason it does not work with 
4motion.
I installed the "master" version from git and I edited the dictionary 
files.
My problem is that i see access-accept being sent but the connection is 
not established and radio keeps trying to authenticate with freeradius. 
Each attempt ends with access-accept being sent.

Thanks in advance
P.S. I am new to freeradius and wimax so please dont eat me alive...

Regards,
Krzysztof

Debug:

FreeRADIUS Version 3.0.0, for host i686-pc-linux-gnu, built on Oct 17 
2011 at 10:26:54
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.

Compilation options:
Regex flavour: Posix
Starting - reading configuration files ...
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/modules/
including configuration file /usr/local/etc/raddb/modules/redis
including configuration file /usr/local/etc/raddb/modules/cui
including configuration file /usr/local/etc/raddb/modules/echo
including configuration file /usr/local/etc/raddb/modules/checkval
including configuration file /usr/local/etc/raddb/modules/sql_log
including configuration file /usr/local/etc/raddb/modules/smsotp
including configuration file /usr/local/etc/raddb/modules/acct_unique
including configuration file /usr/local/etc/raddb/modules/policy
including configuration file /usr/local/etc/raddb/modules/realm
including configuration file /usr/local/etc/raddb/modules/files
including configuration file /usr/local/etc/raddb/modules/etc_group
including configuration file /usr/local/etc/raddb/modules/ippool
including configuration file /usr/local/etc/raddb/modules/inner-eap
including configuration file /usr/local/etc/raddb/modules/pam
including configuration file /usr/local/etc/raddb/modules/sql
including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf
including configuration file /usr/local/etc/raddb/modules/counter
including configuration file /usr/local/etc/raddb/modules/expiration
including configuration file /usr/local/etc/raddb/modules/detail.log
including configuration file /usr/local/etc/raddb/modules/expr
including configuration file /usr/local/etc/raddb/modules/ntlm_auth
including configuration file /usr/local/etc/raddb/modules/mac2vlan
including configuration file /usr/local/etc/raddb/modules/detail.example.com
including configuration file /usr/local/etc/raddb/modules/always
including configuration file /usr/local/etc/raddb/modules/logintime
including configuration file /usr/local/etc/raddb/modules/replicate
including configuration file /usr/local/etc/raddb/modules/unix
including configuration file /usr/local/etc/raddb/modules/chap
including configuration file /usr/local/etc/raddb/modules/linelog
including configuration file /usr/local/etc/raddb/modules/radutmp
including configuration file /usr/local/etc/raddb/modules/digest
including configuration file /usr/local/etc/raddb/modules/sradutmp
including configuration file /usr/local/etc/raddb/modules/preprocess
including configuration file /usr/local/etc/raddb/modules/ldap
including configuration file /usr/local/etc/raddb/modules/sqlippool
including configuration file /usr/local/etc/raddb/sql/postgresql/ippool.conf
including configuration file /usr/local/etc/raddb/modules/opendirectory
including configuration file /usr/local/etc/raddb/modules/otp
including configuration file /usr/local/etc/raddb/modules/rediswho
including configuration file /usr/local/etc/raddb/modules/mschap
including configuration file /usr/local/etc/raddb/modules/eap
including configuration file /usr/local/etc/raddb/modules/attr_rewrite
including configuration file /usr/local/etc/raddb/modules/exec
including configuration file /usr/local/etc/raddb/modules/pap
including configuration file 
/usr/local/etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /usr/local/etc/raddb/modules/mac2ip
including configuration file /usr/local/etc/raddb/modules/utf8
including configuration file /usr/local/etc/raddb/modules/passwd
including configuration file /usr/local/etc/raddb/modules/attr_filter
including configuration file /usr/local/etc/raddb/modules/soh
including configuration file /usr/local/etc/raddb/modules/detail
including configuration file /usr/local/etc/raddb/modules/smbpasswd
including configuration file /usr/local/etc/raddb/modules/dynamic_clients
including configuration file /usr/local/etc/raddb/modules/wimax
including configuration file /usr/local/etc/raddb/modules/krb5
including configuration file /usr/local/etc/raddb/modules/perl
including configuration file /usr/local/etc/raddb/policy.conf
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
including configuration file 
/usr/local/etc/raddb/sites-enabled/control-socket
main {
  security {
         allow_core_dumps = no
  }
}
including dictionary file /usr/local/etc/raddb/dictionary
main {
         name = "radiusd"
         prefix = "/usr/local"
         localstatedir = "/usr/local/var"
         sbindir = "/usr/local/sbin"
         logdir = "/usr/local/var/log/radius"
         run_dir = "/usr/local/var/run/radiusd"
         libdir = "/usr/local/lib"
         radacctdir = "/usr/local/var/log/radius/radacct"
         hostname_lookups = no
         max_request_time = 30
         cleanup_delay = 5
         max_requests = 1024
         pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
         checkrad = "/usr/local/sbin/checkrad"
         debug_level = 0
         proxy_requests = yes
  log {
         stripped_names = no
         auth = no
         auth_badpass = no
         auth_goodpass = no
  }
  security {
         max_attributes = 200
         reject_delay = 1
         status_server = yes
  }
}
radiusd: #### Loading Realms and Home Servers ####
  proxy server {
         retry_delay = 5
         retry_count = 3
         default_fallback = no
         dead_time = 120
         wake_all_if_all_dead = no
  }
  home_server localhost {
         ipaddr = 127.0.0.1
         port = 1812
         type = "auth"
         secret = "testing123"
         response_window = 20
         max_outstanding = 65536
         require_message_authenticator = yes
         zombie_period = 40
         status_check = "status-server"
         ping_interval = 30
         check_interval = 30
         num_answers_to_alive = 3
         num_pings_to_alive = 3
         revive_interval = 120
         status_check_timeout = 4
   coa {
         irt = 2
         mrt = 16
         mrc = 5
         mrd = 30
   }
   limit {
         max_connections = 16
         max_requests = 0
         lifetime = 0
         idle_timeout = 0
   }
  }
  home_server_pool my_auth_failover {
         type = fail-over
         home_server = localhost
  }
  realm example.com {
         auth_pool = my_auth_failover
  }
  realm LOCAL {
  }
radiusd: #### Loading Clients ####
  client localhost {
         ipaddr = 127.0.0.1
         require_message_authenticator = no
         secret = "testing123"
         nastype = "other"
         max_connections = 16
  }
  client 10.190.0.2 {
         require_message_authenticator = no
         secret = "pass"
         shortname = "Testing"
         nastype = "other"
         max_connections = 16
  }

radiusd: #### Instantiating modules ####
  instantiate {
  Module: Linked to module rlm_exec
  Module: Instantiating module "exec" from file 
/usr/local/etc/raddb/modules/exec
   exec {
         wait = no
         input_pairs = "request"
         shell_escape = yes
   }
  Module: Linked to module rlm_expr
  Module: Instantiating module "expr" from file 
/usr/local/etc/raddb/modules/expr
  Module: Linked to module rlm_expiration
  Module: Instantiating module "expiration" from file 
/usr/local/etc/raddb/modules/expiration
   expiration {
         reply-message = "Password Has Expired  "
   }
  Module: Linked to module rlm_logintime
  Module: Instantiating module "logintime" from file 
/usr/local/etc/raddb/modules/logintime
   logintime {
         reply-message = "You are calling outside your allowed timespan  "
         minimum-timeout = 60
   }
  }
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
  modules {
  Module: Checking authenticate {...} for more modules to load
  Module: Linked to module rlm_chap
  Module: Instantiating module "chap" from file 
/usr/local/etc/raddb/modules/chap
  Module: Linked to module rlm_mschap
  Module: Instantiating module "mschap" from file 
/usr/local/etc/raddb/modules/mschap
   mschap {
         use_mppe = yes
         require_encryption = no
         require_strong = no
         with_ntdomain_hack = no
    passchange {
    }
         allow_retry = yes
   }
  Module: Linked to module rlm_eap
  Module: Instantiating module "eap" from file 
/usr/local/etc/raddb/modules/eap
   eap {
         default_eap_type = "ttls"
         timer_expire = 60
         ignore_unknown_eap_types = no
         cisco_accounting_username_bug = no
         max_sessions = 4096
   }
  Module: Linked to sub-module rlm_eap_md5
  Module: Instantiating eap-md5
  Module: Linked to sub-module rlm_eap_leap
  Module: Instantiating eap-leap
  Module: Linked to sub-module rlm_eap_gtc
  Module: Instantiating eap-gtc
    gtc {
         challenge = "Password: "
         auth_type = "PAP"
    }
  Module: Linked to sub-module rlm_eap_tls
  Module: Instantiating eap-tls
    tls {
         rsa_key_exchange = no
         dh_key_exchange = yes
         rsa_key_length = 512
         dh_key_length = 512
         verify_depth = 0
         CA_path = "/usr/local/etc/raddb/certs"
         pem_file_type = yes
         private_key_file = "/usr/local/etc/raddb/certs/server.pem"
         certificate_file = "/usr/local/etc/raddb/certs/server.pem"
         CA_file = "/usr/local/etc/raddb/certs/ca.pem"
         private_key_password = "whatever"
         dh_file = "/usr/local/etc/raddb/certs/dh"
         random_file = "/usr/local/etc/raddb/certs/random"
         fragment_size = 1024
         include_length = yes
         check_crl = no
         cipher_list = "DEFAULT"
         make_cert_command = "/usr/local/etc/raddb/certs/bootstrap"
         ecdh_curve = "prime256v1"
     cache {
         enable = no
         lifetime = 24
         max_entries = 255
     }
     verify {
     }
     ocsp {
         enable = no
         override_cert_url = yes
         url = "http://127.0.0.1/ocsp/"
     }
    }
  Module: Linked to sub-module rlm_eap_ttls
  Module: Instantiating eap-ttls
    ttls {
         default_eap_type = "md5"
         copy_request_to_tunnel = yes
         use_tunneled_reply = yes
         virtual_server = "inner-tunnel"
         include_length = yes
    }
  Module: Linked to sub-module rlm_eap_peap
  Module: Instantiating eap-peap
    peap {
         default_eap_type = "mschapv2"
         copy_request_to_tunnel = no
         use_tunneled_reply = no
         proxy_tunneled_request_as_eap = yes
         virtual_server = "inner-tunnel"
         soh = no
    }
  Module: Linked to sub-module rlm_eap_mschapv2
  Module: Instantiating eap-mschapv2
    mschapv2 {
         with_ntdomain_hack = no
         send_error = no
    }
  Module: Checking authorize {...} for more modules to load
  Module: Linked to module rlm_preprocess
  Module: Instantiating module "preprocess" from file 
/usr/local/etc/raddb/modules/preprocess
   preprocess {
         huntgroups = "/usr/local/etc/raddb/huntgroups"
         hints = "/usr/local/etc/raddb/hints"
         with_ascend_hack = no
         ascend_channels_per_line = 23
         with_ntdomain_hack = no
         with_specialix_jetstream_hack = no
         with_cisco_vsa_hack = no
         with_alvarion_vsa_hack = no
   }
  Module: Linked to module rlm_files
  Module: Instantiating module "files" from file 
/usr/local/etc/raddb/modules/files
   files {
         usersfile = "/usr/local/etc/raddb/users"
         acctusersfile = "/usr/local/etc/raddb/acct_users"
         preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
         compat = "no"
   }
  Module: Checking preacct {...} for more modules to load
  Module: Loading virtual module acct_unique
  Module: Linked to module rlm_realm
  Module: Instantiating module "suffix" from file 
/usr/local/etc/raddb/modules/realm
   realm suffix {
         format = "suffix"
         delimiter = "@"
         ignore_default = no
         ignore_null = no
   }
  Module: Linked to module rlm_wimax
  Module: Instantiating module "wimax" from file 
/usr/local/etc/raddb/modules/wimax
   wimax {
         delete_mppe_keys = no
   }
  Module: Checking accounting {...} for more modules to load
  Module: Linked to module rlm_unix
  Module: Instantiating module "unix" from file 
/usr/local/etc/raddb/modules/unix
   unix {
         radwtmp = "/usr/local/var/log/radius/radwtmp"
   }
  Module: Linked to module rlm_radutmp
  Module: Instantiating module "radutmp" from file 
/usr/local/etc/raddb/modules/radutmp
   radutmp {
         filename = "/usr/local/var/log/radius/radutmp"
         username = "%{User-Name}"
         case_sensitive = yes
         check_with_nas = yes
         perm = 384
         callerid = yes
   }
  Module: Linked to module rlm_attr_filter
  Module: Instantiating module "attr_filter.accounting_response" from 
file /usr/local/etc/raddb/modules/attr_filter
   attr_filter attr_filter.accounting_response {
         attrsfile = "/usr/local/etc/raddb/attrs.accounting_response"
         key = "%{User-Name}"
         relaxed = no
   }
  Module: Checking session {...} for more modules to load
  Module: Checking post-proxy {...} for more modules to load
  Module: Checking post-auth {...} for more modules to load
  Module: Instantiating module "attr_filter.access_reject" from file 
/usr/local/etc/raddb/modules/attr_filter
   attr_filter attr_filter.access_reject {
         attrsfile = "/usr/local/etc/raddb/attrs.access_reject"
         key = "%{User-Name}"
         relaxed = no
   }
  } # modules
} # server
server inner-tunnel { # from file 
/usr/local/etc/raddb/sites-enabled/inner-tunnel
  modules {
  Module: Checking authenticate {...} for more modules to load
  Module: Checking authorize {...} for more modules to load
  Module: Checking session {...} for more modules to load
  Module: Checking post-proxy {...} for more modules to load
  Module: Checking post-auth {...} for more modules to load
  } # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
         type = "auth"
         ipaddr = *
         port = 0
}
listen {
         type = "acct"
         ipaddr = *
         port = 0
}
listen {
         type = "control"
  listen {
         socket = "/usr/local/var/run/radiusd/radiusd.sock"
  }
}
listen {
         type = "auth"
         ipaddr = 127.0.0.1
         port = 18120
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /usr/local/var/run/radiusd/radiusd.sock
Listening on authentication address 127.0.0.1 port 18120 as server 
inner-tunnel
Opening new proxy address * port 1814
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=225, 
length=226
         User-Name = "{sm=1}test@company.ie"
         EAP-Message = 
0x0201002a017b736d3d317d6d61676e612e74616c6c616768742e7465737440616972737065
65642e6965
         Message-Authenticator = 0xb0e4f53c239e82a5a9424643abac90c5
         NAS-Identifier = "BTS105"
         NAS-IP-Address = 10.190.0.2
         Calling-Station-Id = "00-26-82-D0-B6-F6"
         WiMAX-BS-Id = 0xffc6c8690100
         NAS-Port-Type = Wireless-802.16
         Framed-MTU = 2000
         Service-Type = Framed-User
         WiMAX-GMT-Timezone-offset = 0
         WiMAX-Release = "1.0"
         WiMAX-Accounting-Capabilities = IP-Session-Based
         WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
         Attr-26.24757.1.7 = 0x0000028a
(0) # Executing section authorize from file 
/usr/local/etc/raddb/sites-enabled/default
(0)   group authorize {
(0)  - entering group authorize {...}
(0)   [preprocess] = ok
(0)   [chap] = noop
(0)   [mschap] = noop
(0) eap : EAP packet type response id 1 length 42
(0) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the 
rest of authorize
(0)   [eap] = ok
(0) Found Auth-Type = ?
(0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(0)   group authenticate {
(0)  - entering group authenticate {...}
(0) eap : EAP Identity
(0) eap : processing type tls
(0) tls : Initiate
(0) tls : Start returned 1
(0)   [eap] = handled
Sending Access-Challenge of id 225 to 10.190.0.2 port 1812
         EAP-Message = 0x010200061520
         Message-Authenticator = 0x00000000000000000000000000000000
         State = 0x4524932a452686bf0e6f9b30d966adf3
(0) Finished request 0.
Waking up in 0.3 seconds.
rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=226, 
length=290
         User-Name = "{sm=1}test@company.ie"
         EAP-Message = 
0x0202005815800000004e16030100490100004503014d6f0492446dcf37684a8ba3964276e6
a0af14e11c0c66ba0bfe09bee47296d900001e00390038003500160013000a00330032002f00
15001200090014001100080100
         Message-Authenticator = 0x16b9a8766e5ca7d66bd4109f08badf56
         NAS-Identifier = "BTS105"
         NAS-IP-Address = 10.190.0.2
         Calling-Station-Id = "00-26-82-D0-B6-F6"
         WiMAX-BS-Id = 0xffc6c8690100
         NAS-Port-Type = Wireless-802.16
         Framed-MTU = 2000
         Service-Type = Framed-User
         WiMAX-GMT-Timezone-offset = 0
         WiMAX-Release = "1.0"
         WiMAX-Accounting-Capabilities = IP-Session-Based
         WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
         Attr-26.24757.1.7 = 0x0000028a
         State = 0x4524932a452686bf0e6f9b30d966adf3
(1) # Executing section authorize from file 
/usr/local/etc/raddb/sites-enabled/default
(1)   group authorize {
(1)  - entering group authorize {...}
(1)   [preprocess] = ok
(1)   [chap] = noop
(1)   [mschap] = noop
(1) eap : EAP packet type response id 2 length 88
(1) eap : Continuing tunnel setup.
(1)   [eap] = ok
(1) Found Auth-Type = ?
(1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(1)   group authenticate {
(1)  - entering group authenticate {...}
(1) eap : Request found, released from the list
(1) eap : EAP/ttls
(1) eap : processing type ttls
(1) ttls : Authenticate
(1) ttls : processing EAP-TLS
   TLS Length 78
(1) ttls : Length Included
(1) ttls : eaptls_verify returned 11
(1) ttls :     (other): before/accept initialization
(1) ttls :     TLS_accept: before/accept initialization
(1) ttls : <<< TLS 1.0 Handshake [length 0049], ClientHello
(1) ttls :     TLS_accept: SSLv3 read client hello A
(1) ttls : >>> TLS 1.0 Handshake [length 002a], ServerHello
(1) ttls :     TLS_accept: SSLv3 write server hello A
(1) ttls : >>> TLS 1.0 Handshake [length 085e], Certificate
(1) ttls :     TLS_accept: SSLv3 write certificate A
(1) ttls : >>> TLS 1.0 Handshake [length 020d], ServerKeyExchange
(1) ttls :     TLS_accept: SSLv3 write key exchange A
(1) ttls : >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
(1) ttls :     TLS_accept: SSLv3 write server done A
(1) ttls :     TLS_accept: SSLv3 flush data
(1) ttls :     TLS_accept: Need to read more data: SSLv3 read client 
certificate A
In SSL Handshake Phase
In SSL Accept mode
(1) ttls : eaptls_process returned 13
(1)   [eap] = handled
Sending Access-Challenge of id 226 to 10.190.0.2 port 1812
         EAP-Message = 
0x0103040015c000000aad160301002a0200002603014e9ee50972fa598b689b6f459a90c557
abd4de3970630ee299ae5a309acdf4ec00003900160301085e0b00085a0008570003a6308203
a23082028aa003020102020101300d06092a864886f70d0101040500308193310b3009060355
040613024652310f300d060355040813065261646975733112301006035504071309536f6d65
776865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886
f70d010901161161646d696e406578616d706c652e636f6d312630240603550403131d457861
6d706c6520436572746966696361746520417574686f72697479
         EAP-Message = 
0x301e170d3131313031333039353734375a170d3132313031323039353734375a307c310b30
09060355040613024652310f300d0603550408130652616469757331153013060355040a130c
4578616d706c6520496e632e312330210603550403131a4578616d706c652053657276657220
43657274696669636174653120301e06092a864886f70d010901161161646d696e406578616d
706c652e636f6d30820122300d06092a864886f70d01010105000382010f003082010a028201
0100caef6b9b67bdef4ad8e1e44128bc7e4d59b10f7fea2f25a815df34e36e48223a3812b6b4
c9005ddf99cf79afe5a4645eb7847cdaa444ad11ad858447f05e
         EAP-Message = 
0xbb17624bb71f12a488110b381a1a629f04fe7811e5589b7cfebad4e16d89ce6b982880f28d
b5f6817bda4db85b83520a6d47f682e224f70e9a104fc421ca712b8fa4c1b9e6c98329a5db41
50bb6d06fe29729e2842c5ecb6960b89cbdadc1ec91e7eadbdb4288023659fef46b02ec89bb4
7026e86c85aefb37d6df74167a3e12279d32b42199ba04013f8d4985c218365f0f60c3d9af22
7a3949125925db3ffb1bdccf34548f7626dac63e22b0624b6f16669d47fbc7ca4ddf2f794d00
4b901ecb090203010001a317301530130603551d25040c300a06082b06010505070301300d06
092a864886f70d01010405000382010100b676c0afe25190b575
         EAP-Message = 
0x1fa8ec975b02e09c61c8b25c4e2b7fe96b9275018524ef5bfecace1625ea8a09aaccc1a0b9
cdb2ebe7d1780ecf6a2bf775d639944c27881d5ea4d6fb013799ca759216777b46ee8dbdd9b6
6346ad9ee5b4e1854f04fa495bc64ce62702c50f3ba637d28c835c3113ca9984a94b1b3e6402
8034c73d734af96bdbb3e7bbb427372fb069af913eb2ced4ef9253a87050138334320cd2f563
c457de969f8472fd861282613fb501a0732e1bc2e9a0eb41caa6cb481c773f79737c1a9bc0e9
5e795ee5a0974fb2752d947606422dfba0e2c45b046c834c0553aecdd2b3a37952050de7a2d6
e27be9065dc29bc10b90188a7faf20beed7b904c0004ab308204
         EAP-Message = 0xa73082038fa0030201020209
         Message-Authenticator = 0x00000000000000000000000000000000
         State = 0x4524932a442786bf0e6f9b30d966adf3
(1) Finished request 1.
Waking up in 0.1 seconds.
rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=227, 
length=208
         User-Name = "{sm=1}test@company.ie"
         EAP-Message = 0x020300061500
         Message-Authenticator = 0x9a77a1ab1819f89e18fb8f7a8d263dbc
         NAS-Identifier = "BTS105"
         NAS-IP-Address = 10.190.0.2
         Calling-Station-Id = "00-26-82-D0-B6-F6"
         WiMAX-BS-Id = 0xffc6c8690100
         NAS-Port-Type = Wireless-802.16
         Framed-MTU = 2000
         Service-Type = Framed-User
         WiMAX-GMT-Timezone-offset = 0
         WiMAX-Release = "1.0"
         WiMAX-Accounting-Capabilities = IP-Session-Based
         WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
         Attr-26.24757.1.7 = 0x0000028a
         State = 0x4524932a442786bf0e6f9b30d966adf3
(2) # Executing section authorize from file 
/usr/local/etc/raddb/sites-enabled/default
(2)   group authorize {
(2)  - entering group authorize {...}
(2)   [preprocess] = ok
(2)   [chap] = noop
(2)   [mschap] = noop
(2) eap : EAP packet type response id 3 length 6
(2) eap : Continuing tunnel setup.
(2)   [eap] = ok
(2) Found Auth-Type = ?
(2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(2)   group authenticate {
(2)  - entering group authenticate {...}
(2) eap : Request found, released from the list
(2) eap : EAP/ttls
(2) eap : processing type ttls
(2) ttls : Authenticate
(2) ttls : processing EAP-TLS
(2) ttls : Received TLS ACK
(2) ttls : Received TLS ACK
(2) ttls : ACK handshake fragment handler
(2) ttls : eaptls_verify returned 1
(2) ttls : eaptls_process returned 13
(2)   [eap] = handled
Sending Access-Challenge of id 227 to 10.190.0.2 port 1812
         EAP-Message = 
0x0104040015c000000aad00ec1d720e4a7e8a98300d06092a864886f70d0101050500308193
310b3009060355040613024652310f300d060355040813065261646975733112301006035504
071309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e312030
1e06092a864886f70d010901161161646d696e406578616d706c652e636f6d31263024060355
0403131d4578616d706c6520436572746966696361746520417574686f72697479301e170d31
31313031333039353734375a170d3132313031323039353734375a308193310b300906035504
0613024652310f300d0603550408130652616469757331123010
         EAP-Message = 
0x06035504071309536f6d65776865726531153013060355040a130c4578616d706c6520496e
632e3120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d3126
30240603550403131d4578616d706c6520436572746966696361746520417574686f72697479
30820122300d06092a864886f70d01010105000382010f003082010a0282010100be734cc62e
cb7177f45d9f49d0dc7c67f1e8f71f9ad048dd67a12de738c98729d524e687e47b801bf912a3
ce76ff5c35cbbae16eed0733b5e51b53633123803af7f8bdb2a456b82f3c022ab8aa75e09e55
f898044a1de747799af4506d191327f3cb2fd28c87d277828b1b
         EAP-Message = 
0x5372af25f28e4dc8ece69051878c673e3036fad0165be210ee1e208c762dbd201af930f8d3
0c2d8e1f112afa92bec4462e0f812d645e0572c991a9f1ff3fb7938f9aa1c92db6464ea6025f
c34af023dc152c09ac6074742f3b1766cfca4c352255553bea37de71ea152bb306cd1893e111
19326b7a5bdf957fc90726ffcf49b542285aeda0480ced4f180547fe0449400dfd786fc50203
010001a381fb3081f8301d0603551d0e04160414b57317268d6d7a07453f567b60d8e38ab31a
f2a13081c80603551d230481c03081bd8014b57317268d6d7a07453f567b60d8e38ab31af2a1
a18199a48196308193310b3009060355040613024652310f300d
         EAP-Message = 
0x060355040813065261646975733112301006035504071309536f6d65776865726531153013
060355040a130c4578616d706c6520496e632e3120301e06092a864886f70d01090116116164
6d696e406578616d706c652e636f6d312630240603550403131d4578616d706c652043657274
6966696361746520417574686f72697479820900ec1d720e4a7e8a98300c0603551d13040530
030101ff300d06092a864886f70d010105050003820101000145888b12dc92a1ae57d9cf122d
90702ccf6fdeacf92f4e46bdab9773d80bb5373ddacd234f03fd8d8f8587b515ba24b28931ff
ec882ad044f8bc07f3c510b90f86e302639082c1d1fbc9fd9d2b
         EAP-Message = 0x29f6a43153b63396708d1c2a
         Message-Authenticator = 0x00000000000000000000000000000000
         State = 0x4524932a472086bf0e6f9b30d966adf3
(2) Finished request 2.
rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=228, 
length=208
         User-Name = "{sm=1}test@company.ie"
         EAP-Message = 0x020400061500
         Message-Authenticator = 0xe3f7dbd13796664921230156fd4a7f0b
         NAS-Identifier = "BTS105"
         NAS-IP-Address = 10.190.0.2
         Calling-Station-Id = "00-26-82-D0-B6-F6"
         WiMAX-BS-Id = 0xffc6c8690100
         NAS-Port-Type = Wireless-802.16
         Framed-MTU = 2000
         Service-Type = Framed-User
         WiMAX-GMT-Timezone-offset = 0
         WiMAX-Release = "1.0"
         WiMAX-Accounting-Capabilities = IP-Session-Based
         WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
         Attr-26.24757.1.7 = 0x0000028a
         State = 0x4524932a472086bf0e6f9b30d966adf3
(3) # Executing section authorize from file 
/usr/local/etc/raddb/sites-enabled/default
(3)   group authorize {
(3)  - entering group authorize {...}
(3)   [preprocess] = ok
(3)   [chap] = noop
(3)   [mschap] = noop
(3) eap : EAP packet type response id 4 length 6
(3) eap : Continuing tunnel setup.
(3)   [eap] = ok
(3) Found Auth-Type = ?
(3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(3)   group authenticate {
(3)  - entering group authenticate {...}
(3) eap : Request found, released from the list
(3) eap : EAP/ttls
(3) eap : processing type ttls
(3) ttls : Authenticate
(3) ttls : processing EAP-TLS
(3) ttls : Received TLS ACK
(3) ttls : Received TLS ACK
(3) ttls : ACK handshake fragment handler
(3) ttls : eaptls_verify returned 1
(3) ttls : eaptls_process returned 13
(3)   [eap] = handled
Sending Access-Challenge of id 228 to 10.190.0.2 port 1812
         EAP-Message = 
0x010502cb158000000aad6b687c3b13bd2cbcdc94906e01fea4a72a53605631056850f7c340
7a5d7b7a88d58a990667955f91c7e7fd1d4bcc1cb32597585648a06987428bb59b80040251ea
1eb36ca37e6b08d6dcff0bbac544ee590b97dcdd3043216a8d7c43b3b8177a6d50c34a1954b7
97f6ce1b83260aec1f9cd4f49b89bf166b6fcbe2169a6cdfdd381bfdc0210904a4332192d206
d220b4227586268fe877dec3e39b6c9cfa223f5af7f750fd76160301020d0c0002090080f261
ea67ca98641e7618ffeaf9dbfbfeba8524299d1674bbae7d654b45ddb4d4d56cfc334a0d31a3
3b07a51ec227e83c6111384da4c513b3799894ab435ab01f0308
         EAP-Message = 
0xbae422a62095161d878138f148293e9d8bbdd8e1f17eeb6aea213178d729efd10049433c42
9ea9685564ff39a81b78828cd381e4ebb6ff4a2022e92349230001020080cf073ac84159ffdf
2a3954bc6d8c5b241548eef76ea49c6f5648bf586017e4f8038d6956580fa5bd17a7199c7b05
bec37333162d8c6302c80092a8339aaecdcd44d3f77964b938c579d2fe5f5e2eb90d52b0215d
ec2972f639283ac415d95b1aecb8d856e28eababe9ee8f662b385efb60b09741356027269b5a
089c7c85738001004c76e655fcfb777d949b3e64e0018f329eedb978f1294c0f4fe10736b52d
f39df6edf0f5634de3dc17614893582df2e251c5b6acd61276d0
         EAP-Message = 
0xb71e3de49e55f6775effac0d28046d1510714dbd68c4d55dedb7329f9ba3de55154a4ffd8d
2aad7081dc07b232ff609ca8c19743ba19ccd2d1b3bf35dd1ccd78c1d54f477a4336188fb929
8426a941501972562ed1fca0efad8c451b0ec15674ff86500e67617241c95625ddecc82feefc
41c0eb91cdab0cc56176884e28aab3c850a81bd7736e1ec133d6b83db28db10623c552c5f7a2
d7a6d59e0f1cf362b155e415a274088d2eb875d07acd63236660e40f200f6055bd2c0c934777
c61d55c1a57d7983d867c016030100040e000000
         Message-Authenticator = 0x00000000000000000000000000000000
         State = 0x4524932a462186bf0e6f9b30d966adf3
(3) Finished request 3.
Waking up in 0.2 seconds.
Waking up in 4.3 seconds.
rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=229, 
length=410
         User-Name = "{sm=1}test@company.ie"
         EAP-Message = 
0x020500d01580000000c61603010086100000820080e3190ec3957550a29a5f545907823a1e
adcd83d25d26b74f1858aae52bac948aef1e3d75bc2adff031a57ad656d2d09066f0cae0630e
0c66d0487abc980cb7d6631a6531f05cba19b4a94f628a6bda9a90aae7e58f33fe204399f1fc
d215d007dba697579f7bcb002baa5d67c06a10d82953c53a31b100711f4f0d07e550a3d41403
0100010116030100308a7e900fbfb4f5de1ef3c91092938dee297c5a4b41f537309996762989
cffc3aa2475130e85a6cfcbd3cc5d4f4a38b01
         Message-Authenticator = 0x4f4cb9ffdb83cca6564a6d11de9eca5e
         NAS-Identifier = "BTS105"
         NAS-IP-Address = 10.190.0.2
         Calling-Station-Id = "00-26-82-D0-B6-F6"
         WiMAX-BS-Id = 0xffc6c8690100
         NAS-Port-Type = Wireless-802.16
         Framed-MTU = 2000
         Service-Type = Framed-User
         WiMAX-GMT-Timezone-offset = 0
         WiMAX-Release = "1.0"
         WiMAX-Accounting-Capabilities = IP-Session-Based
         WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
         Attr-26.24757.1.7 = 0x0000028a
         State = 0x4524932a462186bf0e6f9b30d966adf3
(4) # Executing section authorize from file 
/usr/local/etc/raddb/sites-enabled/default
(4)   group authorize {
(4)  - entering group authorize {...}
(4)   [preprocess] = ok
(4)   [chap] = noop
(4)   [mschap] = noop
(4) eap : EAP packet type response id 5 length 208
(4) eap : Continuing tunnel setup.
(4)   [eap] = ok
(4) Found Auth-Type = ?
(4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(4)   group authenticate {
(4)  - entering group authenticate {...}
(4) eap : Request found, released from the list
(4) eap : EAP/ttls
(4) eap : processing type ttls
(4) ttls : Authenticate
(4) ttls : processing EAP-TLS
   TLS Length 198
(4) ttls : Length Included
(4) ttls : eaptls_verify returned 11
(4) ttls : <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange
(4) ttls :     TLS_accept: SSLv3 read client key exchange A
(4) ttls : <<< TLS 1.0 ChangeCipherSpec [length 0001]
(4) ttls : <<< TLS 1.0 Handshake [length 0010], Finished
(4) ttls :     TLS_accept: SSLv3 read finished A
(4) ttls : >>> TLS 1.0 ChangeCipherSpec [length 0001]
(4) ttls :     TLS_accept: SSLv3 write change cipher spec A
(4) ttls : >>> TLS 1.0 Handshake [length 0010], Finished
(4) ttls :     TLS_accept: SSLv3 write finished A
(4) ttls :     TLS_accept: SSLv3 flush data
(4) ttls :     (other): SSL negotiation finished successfully
SSL Connection Established
(4) ttls : eaptls_process returned 13
(4)   [eap] = handled
Sending Access-Challenge of id 229 to 10.190.0.2 port 1812
         EAP-Message = 
0x0106004515800000003b14030100010116030100303a882b92af53c50ce085959593e73fca
32ab9a7bd2e2e0a895c165c0a4163a638e8f12fef6f0bc8878a70cfcda0548a8
         Message-Authenticator = 0x00000000000000000000000000000000
         State = 0x4524932a412286bf0e6f9b30d966adf3
(4) Finished request 4.
Waking up in 0.2 seconds.
rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=230, 
length=378
         User-Name = "{sm=1test@company.ie"
         EAP-Message = 
0x020600b0150017030100201783b2821501d183457ee81425c3bcbfd372c1207cc52b44e4af
3250a771e4181703010080a65edf5e1fddb09f70ebffef22b5811ebb4d7f3143b2d1ecf88e2a
f29edd0178dc38aa45de3e8ac0106fa7259392dbb721ed242bf6fd1a79cdc10faad024b583e8
710f2396246d34353b915f3a49771b11ed93e106564b0f94f208631a4f9852c21452c53492d5
302b2571ec8f1b95d0b1abdaf202da0f42b9b68c863653886c
         Message-Authenticator = 0x064bdfc96ada80a4ac9a92242232b9ae
         NAS-Identifier = "BTS105"
         NAS-IP-Address = 10.190.0.2
         Calling-Station-Id = "00-26-82-D0-B6-F6"
         WiMAX-BS-Id = 0xffc6c8690100
         NAS-Port-Type = Wireless-802.16
         Framed-MTU = 2000
         Service-Type = Framed-User
         WiMAX-GMT-Timezone-offset = 0
         WiMAX-Release = "1.0"
         WiMAX-Accounting-Capabilities = IP-Session-Based
         WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
         Attr-26.24757.1.7 = 0x0000028a
         State = 0x4524932a412286bf0e6f9b30d966adf3
(5) # Executing section authorize from file 
/usr/local/etc/raddb/sites-enabled/default
(5)   group authorize {
(5)  - entering group authorize {...}
(5)   [preprocess] = ok
(5)   [chap] = noop
(5)   [mschap] = noop
(5) eap : EAP packet type response id 6 length 176
(5) eap : Continuing tunnel setup.
(5)   [eap] = ok
(5) Found Auth-Type = ?
(5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(5)   group authenticate {
(5)  - entering group authenticate {...}
(5) eap : Request found, released from the list
(5) eap : EAP/ttls
(5) eap : processing type ttls
(5) ttls : Authenticate
(5) ttls : processing EAP-TLS
(5) ttls : eaptls_verify returned 7
(5) ttls : Done initial handshake
(5) ttls : eaptls_process returned 7
(5) ttls : Session established.  Proceeding to decode tunneled attributes.
(5) ttls : Got tunneled request
         User-Name = "30001020"
         MS-CHAP-Challenge = 0x967d3f6435e31b63
         MS-CHAP-Response = 
0xb801000000000000000000000000000000000000000000000000b32723b5ce6e52ba066370
add032fa03fecc6350d759fa7f
         FreeRADIUS-Proxied-To = 127.0.0.1
(5) ttls : Sending tunneled request
         User-Name = "30001020"
         MS-CHAP-Challenge = 0x967d3f6435e31b63
         MS-CHAP-Response = 
0xb801000000000000000000000000000000000000000000000000b32723b5ce6e52ba066370
add032fa03fecc6350d759fa7f
         FreeRADIUS-Proxied-To = 127.0.0.1
         NAS-Identifier = "BTS105"
         NAS-IP-Address = 10.190.0.2
         Calling-Station-Id = "00-26-82-D0-B6-F6"
         WiMAX-BS-Id = 0xffc6c8690100
         NAS-Port-Type = Wireless-802.16
         Framed-MTU = 2000
         Service-Type = Framed-User
         WiMAX-Release = "1.0"
         WiMAX-Accounting-Capabilities = IP-Session-Based
         WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
         Attr-26.24757.1.7 = 0x0000028a
server inner-tunnel {
(5) # Executing section authorize from file 
/usr/local/etc/raddb/sites-enabled/inner-tunnel
(5)   group authorize {
(5)  - entering group authorize {...}
(5)   [chap] = noop
(5) mschap : Found MS-CHAP attributes.  Setting 'Auth-Type  = mschap'
(5)   [mschap] = ok
(5) eap : No EAP-Message, not doing EAP
(5)   [eap] = noop
(5) files : users: Matched entry 30001020 at line 99
(5)   [files] = ok
(5)   [preprocess] = ok
(5) Found Auth-Type = ?
(5) # Executing group from file 
/usr/local/etc/raddb/sites-enabled/inner-tunnel
(5)   group MS-CHAP {
(5)  - entering group MS-CHAP {...}
(5) mschap : Told to do MS-CHAPv1 with NT-Password
(5) mschap : adding MS-CHAPv1 MPPE keys
(5)   [mschap] = ok
(5) # Executing section post-auth from file 
/usr/local/etc/raddb/sites-enabled/inner-tunnel
(5)   group post-auth {
(5)  - entering group post-auth {...}
(5)   update outer.reply {
(5)     expand: %{request:User-Name} -> 30001020
(5)   } # update outer.reply = noop
(5) wimax : No EAP-MSK or EAP-EMSK.  Cannot create WiMAX keys.
(5)   [wimax] = noop
} # server inner-tunnel
(5) ttls : Got tunneled reply code 2
         Alvarion-R3-IF-Name += "CPEL3Mgmt"
         Alvarion-PDFID += 1
         WiMAX-Packet-Data-Flow-Id += 1
         WiMAX-Direction += Bi-Directional
         WiMAX-Transport-Type += IPv4-CS
         WiMAX-Uplink-QOS-Id += 1
         WiMAX-Downlink-QOS-Id += 1
         WiMAX-ClassifierID += 2
         WiMAX-Classifier-Priority += 1
         WiMAX-Classifier-Direction += IN
         WiMAX-IP-TOS-DSCP-Range-and-Mask += 0x31353739323633
         WiMAX-ClassifierID += 1
         WiMAX-Classifier-Priority += 1
         WiMAX-Classifier-Direction += OUT
         WiMAX-IP-TOS-DSCP-Range-and-Mask += 0x3635353335
         WiMAX-QoS-Id += 1
         WiMAX-Schedule-Type += Best-Effort
         WiMAX-Traffic-Priority += 4
         WiMAX-Maximum-Sustained-Traffic-Rate += 512000
         WiMAX-IP-Technology += PMIP4
         Alvarion-R3-IF-Name += "HazelL2Service"
         Alvarion-PDFID += 2
         WiMAX-Packet-Data-Flow-Id += 2
         WiMAX-Direction += Bi-Directional
         WiMAX-Transport-Type += Ethernet
         WiMAX-Uplink-QOS-Id += 2
         WiMAX-Downlink-QOS-Id += 2
         WiMAX-ClassifierID += 1
         WiMAX-Classifier-Priority += 1
         WiMAX-Classifier-Direction += Bi-Directional
         WiMAX-VLAN-ID += 175
         WiMAX-QoS-Id += 2
         WiMAX-Schedule-Type += nrtPS
         WiMAX-Traffic-Priority += 1
         WiMAX-Maximum-Sustained-Traffic-Rate += 4096000
         WiMAX-Minimum-Reserved-Traffic-Rate += 1024000
         WiMAX-IP-Technology += Ethernet-CS
         WiMAX-hHA-IP-MIP4 += 12.12.12.12
         Session-Timeout = 3600
         Reply-Message = "4motion test"
         MS-CHAP-MPPE-Keys = 
0x250838025ed089c5740e1ec19c1d0bedd9776bd85e9fca880000000000000000
         MS-MPPE-Encryption-Policy = Encryption-Allowed
         MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(5) ttls : Got tunneled Access-Accept
(5) eap : Freeing handler
(5)   [eap] = ok
(5) # Executing section post-auth from file 
/usr/local/etc/raddb/sites-enabled/default
(5)   group post-auth {
(5)  - entering group post-auth {...}
(5)   update request {
(5)     expand: %{User-Name} -> {sm=1}test@company.ie
(5)   } # update request = noop
(5)   update reply {
(5)     expand: %{reply:EAP-MSK} -> 
0x1fb12ddd1fa37055e2178c1525d32d189d720d0987006686a6a5306992df472e3c1a0fade5
9132dd591aed447610e20c90a230fa5e7e345461261f8893588691
(5)   } # update reply = noop
(5) wimax : MIP-RK = 
0x34cb0114be346973d5832ba7410516ed882d1fb1fb0ae3ad608e687c48b01ab6948fd63668
f8d0e5fbdb1c3169e676b44aea80064919ae759cc997505584dbf7
(5) wimax : MIP-SPI = dd1974b7
(5)   [wimax] = updated
Sending Access-Accept of id 230 to 10.190.0.2 port 1812
         User-Name = "30001020"
         Alvarion-R3-IF-Name = "CPEL3Mgmt"
         Alvarion-PDFID = 1
         WiMAX-Packet-Data-Flow-Id = 1
         WiMAX-Direction = Bi-Directional
         WiMAX-Transport-Type = IPv4-CS
         WiMAX-Uplink-QOS-Id = 1
         WiMAX-Downlink-QOS-Id = 1
         WiMAX-ClassifierID = 2
         WiMAX-Classifier-Priority = 1
         WiMAX-Classifier-Direction = IN
         WiMAX-IP-TOS-DSCP-Range-and-Mask = 0x31353739323633
         WiMAX-ClassifierID = 1
         WiMAX-Classifier-Priority = 1
         WiMAX-Classifier-Direction = OUT
         WiMAX-IP-TOS-DSCP-Range-and-Mask = 0x3635353335
         WiMAX-QoS-Id = 1
         WiMAX-Schedule-Type = Best-Effort
         WiMAX-Traffic-Priority = 4
         WiMAX-Maximum-Sustained-Traffic-Rate = 512000
         WiMAX-IP-Technology = Ethernet-CS
         Alvarion-R3-IF-Name = "HazelL2Service"
         Alvarion-PDFID = 2
         WiMAX-Packet-Data-Flow-Id = 2
         WiMAX-Direction = Bi-Directional
         WiMAX-Transport-Type = Ethernet
         WiMAX-Uplink-QOS-Id = 2
         WiMAX-Downlink-QOS-Id = 2
         WiMAX-ClassifierID = 1
         WiMAX-Classifier-Priority = 1
         WiMAX-Classifier-Direction = Bi-Directional
         WiMAX-VLAN-ID = 175
         WiMAX-QoS-Id = 2
         WiMAX-Schedule-Type = nrtPS
         WiMAX-Traffic-Priority = 1
         WiMAX-Maximum-Sustained-Traffic-Rate = 4096000
         WiMAX-Minimum-Reserved-Traffic-Rate = 1024000
         WiMAX-IP-Technology = Ethernet-CS
         WiMAX-hHA-IP-MIP4 = 12.12.12.12
         Session-Timeout = 3600
         Reply-Message = "4motion test"
         MS-CHAP-MPPE-Keys = 
0x250838025ed089c5740e1ec19c1d0bedd9776bd85e9fca880000000000000000
         MS-MPPE-Encryption-Policy = Encryption-Allowed
         MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
         MS-MPPE-Recv-Key = 
0x1fb12ddd1fa37055e2178c1525d32d189d720d0987006686a6a5306992df472e
         MS-MPPE-Send-Key = 
0x3c1a0fade59132dd591aed447610e20c90a230fa5e7e345461261f8893588691
         EAP-Message = 0x03060004
         Message-Authenticator = 0x00000000000000000000000000000000
         WiMAX-MSK = 
0x1fb12ddd1fa37055e2178c1525d32d189d720d0987006686a6a5306992df472e3c1a0fade5
9132dd591aed447610e20c90a230fa5e7e345461261f8893588691
(5) Finished request 5.
Waking up in 0.1 seconds.
Waking up in 0.1 seconds.
Waking up in 2.9 seconds.
(0) Cleaning up request packet ID 225 with timestamp +85
Waking up in 0.1 seconds.
(1) Cleaning up request packet ID 226 with timestamp +85
(2) Cleaning up request packet ID 227 with timestamp +85
(3) Cleaning up request packet ID 228 with timestamp +85
Waking up in 1.2 seconds.
(4) Cleaning up request packet ID 229 with timestamp +86
Waking up in 0.1 seconds.
(5) Cleaning up request packet ID 230 with timestamp +86
Ready to process requests.
rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=231, 
length=226
         User-Name = "{sm=1}test@company.ie"
         EAP-Message = 
0x0201002a017b736d3d317d6d61676e612e74616c6c616768742e7465737440616972737065
65642e6965
         Message-Authenticator = 0x2304870d06de86fa88b3ccd2de56a789
         NAS-Identifier = "BTS105"
         NAS-IP-Address = 10.190.0.2
         Calling-Station-Id = "00-26-82-D0-B6-F6"
         WiMAX-BS-Id = 0xffc6c8690100
         NAS-Port-Type = Wireless-802.16
         Framed-MTU = 2000
         Service-Type = Framed-User
         WiMAX-GMT-Timezone-offset = 0
         WiMAX-Release = "1.0"
         WiMAX-Accounting-Capabilities = IP-Session-Based
         WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
         Attr-26.24757.1.7 = 0x0000028a
(6) # Executing section authorize from file 
/usr/local/etc/raddb/sites-enabled/default
(6)   group authorize {
(6)  - entering group authorize {...}
(6)   [preprocess] = ok
(6)   [chap] = noop
(6)   [mschap] = noop
(6) eap : EAP packet type response id 1 length 42
(6) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the 
rest of authorize
(6)   [eap] = ok
(6) Found Auth-Type = ?
(6) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(6)   group authenticate {
(6)  - entering group authenticate {...}
(6) eap : EAP Identity
(6) eap : processing type tls
(6) tls : Initiate
(6) tls : Start returned 1
(6)   [eap] = handled
Sending Access-Challenge of id 231 to 10.190.0.2 port 1812
         EAP-Message = 0x010200061520
         Message-Authenticator = 0x00000000000000000000000000000000
         State = 0xfdcbcc4afdc9d9fe908aaa2f4bb4f780
(6) Finished request 6.
Waking up in 0.3 seconds.
rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=232, 
length=290
         User-Name = "{sm=1}test@company.ie"
         EAP-Message = 
0x0202005815800000004e16030100490100004503014d6f049b50d6ea950c49e9ddac3c33c4
a0477aefbe9119045fd3313c4148aa9300001e00390038003500160013000a00330032002f00
15001200090014001100080100
         Message-Authenticator = 0xab2efdd42f1f345c5b0ff3654e5fbeb1
         NAS-Identifier = "BTS105"
         NAS-IP-Address = 10.190.0.2
         Calling-Station-Id = "00-26-82-D0-B6-F6"
         WiMAX-BS-Id = 0xffc6c8690100
         NAS-Port-Type = Wireless-802.16
         Framed-MTU = 2000
         Service-Type = Framed-User
         WiMAX-GMT-Timezone-offset = 0
         WiMAX-Release = "1.0"
         WiMAX-Accounting-Capabilities = IP-Session-Based
         WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
         Attr-26.24757.1.7 = 0x0000028a
         State = 0xfdcbcc4afdc9d9fe908aaa2f4bb4f780
(7) # Executing section authorize from file 
/usr/local/etc/raddb/sites-enabled/default
(7)   group authorize {
(7)  - entering group authorize {...}
(7)   [preprocess] = ok
(7)   [chap] = noop
(7)   [mschap] = noop
(7) eap : EAP packet type response id 2 length 88
(7) eap : Continuing tunnel setup.
(7)   [eap] = ok
(7) Found Auth-Type = ?
(7) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(7)   group authenticate {
(7)  - entering group authenticate {...}
(7) eap : Request found, released from the list
(7) eap : EAP/ttls
(7) eap : processing type ttls
(7) ttls : Authenticate
(7) ttls : processing EAP-TLS
   TLS Length 78
(7) ttls : Length Included
(7) ttls : eaptls_verify returned 11
(7) ttls :     (other): before/accept initialization
(7) ttls :     TLS_accept: before/accept initialization
(7) ttls : <<< TLS 1.0 Handshake [length 0049], ClientHello
(7) ttls :     TLS_accept: SSLv3 read client hello A
(7) ttls : >>> TLS 1.0 Handshake [length 002a], ServerHello
(7) ttls :     TLS_accept: SSLv3 write server hello A
(7) ttls : >>> TLS 1.0 Handshake [length 085e], Certificate
(7) ttls :     TLS_accept: SSLv3 write certificate A
(7) ttls : >>> TLS 1.0 Handshake [length 020d], ServerKeyExchange
(7) ttls :     TLS_accept: SSLv3 write key exchange A
(7) ttls : >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
(7) ttls :     TLS_accept: SSLv3 write server done A
(7) ttls :     TLS_accept: SSLv3 flush data
(7) ttls :     TLS_accept: Need to read more data: SSLv3 read client 
certificate A
In SSL Handshake Phase
In SSL Accept mode
(7) ttls : eaptls_process returned 13
(7)   [eap] = handled
Sending Access-Challenge of id 232 to 10.190.0.2 port 1812
         EAP-Message = 
0x0103040015c000000aad160301002a0200002603014e9ee512e286821d40c5caafa8f5cd1b
8a1ed466ce0608d778ac01ab923d418c00003900160301085e0b00085a0008570003a6308203
a23082028aa003020102020101300d06092a864886f70d0101040500308193310b3009060355
040613024652310f300d060355040813065261646975733112301006035504071309536f6d65
776865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886
f70d010901161161646d696e406578616d706c652e636f6d312630240603550403131d457861
6d706c6520436572746966696361746520417574686f72697479
         EAP-Message = 
0x301e170d3131313031333039353734375a170d3132313031323039353734375a307c310b30
09060355040613024652310f300d0603550408130652616469757331153013060355040a130c
4578616d706c6520496e632e312330210603550403131a4578616d706c652053657276657220
43657274696669636174653120301e06092a864886f70d010901161161646d696e406578616d
706c652e636f6d30820122300d06092a864886f70d01010105000382010f003082010a028201
0100caef6b9b67bdef4ad8e1e44128bc7e4d59b10f7fea2f25a815df34e36e48223a3812b6b4
c9005ddf99cf79afe5a4645eb7847cdaa444ad11ad858447f05e
         EAP-Message = 
0xbb17624bb71f12a488110b381a1a629f04fe7811e5589b7cfebad4e16d89ce6b982880f28d
b5f6817bda4db85b83520a6d47f682e224f70e9a104fc421ca712b8fa4c1b9e6c98329a5db41
50bb6d06fe29729e2842c5ecb6960b89cbdadc1ec91e7eadbdb4288023659fef46b02ec89bb4
7026e86c85aefb37d6df74167a3e12279d32b42199ba04013f8d4985c218365f0f60c3d9af22
7a3949125925db3ffb1bdccf34548f7626dac63e22b0624b6f16669d47fbc7ca4ddf2f794d00
4b901ecb090203010001a317301530130603551d25040c300a06082b06010505070301300d06
092a864886f70d01010405000382010100b676c0afe25190b575
         EAP-Message = 
0x1fa8ec975b02e09c61c8b25c4e2b7fe96b9275018524ef5bfecace1625ea8a09aaccc1a0b9
cdb2ebe7d1780ecf6a2bf775d639944c27881d5ea4d6fb013799ca759216777b46ee8dbdd9b6
6346ad9ee5b4e1854f04fa495bc64ce62702c50f3ba637d28c835c3113ca9984a94b1b3e6402
8034c73d734af96bdbb3e7bbb427372fb069af913eb2ced4ef9253a87050138334320cd2f563
c457de969f8472fd861282613fb501a0732e1bc2e9a0eb41caa6cb481c773f79737c1a9bc0e9
5e795ee5a0974fb2752d947606422dfba0e2c45b046c834c0553aecdd2b3a37952050de7a2d6
e27be9065dc29bc10b90188a7faf20beed7b904c0004ab308204
         EAP-Message = 0xa73082038fa0030201020209
         Message-Authenticator = 0x00000000000000000000000000000000
         State = 0xfdcbcc4afcc8d9fe908aaa2f4bb4f780
(7) Finished request 7.
Waking up in 0.1 seconds.
rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=233, 
length=208
         User-Name = "{sm=1}test@company.ie"
         EAP-Message = 0x020300061500
         Message-Authenticator = 0xe4548d83804e1e53f53cce5d4e69eede
         NAS-Identifier = "BTS105"
         NAS-IP-Address = 10.190.0.2
         Calling-Station-Id = "00-26-82-D0-B6-F6"
         WiMAX-BS-Id = 0xffc6c8690100
         NAS-Port-Type = Wireless-802.16
         Framed-MTU = 2000
         Service-Type = Framed-User
         WiMAX-GMT-Timezone-offset = 0
         WiMAX-Release = "1.0"
         WiMAX-Accounting-Capabilities = IP-Session-Based
         WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
         Attr-26.24757.1.7 = 0x0000028a
         State = 0xfdcbcc4afcc8d9fe908aaa2f4bb4f780
(8) # Executing section authorize from file 
/usr/local/etc/raddb/sites-enabled/default
(8)   group authorize {
(8)  - entering group authorize {...}
(8)   [preprocess] = ok
(8)   [chap] = noop
(8)   [mschap] = noop
(8) eap : EAP packet type response id 3 length 6
(8) eap : Continuing tunnel setup.
(8)   [eap] = ok
(8) Found Auth-Type = ?
(8) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(8)   group authenticate {
(8)  - entering group authenticate {...}
(8) eap : Request found, released from the list
(8) eap : EAP/ttls
(8) eap : processing type ttls
(8) ttls : Authenticate
(8) ttls : processing EAP-TLS
(8) ttls : Received TLS ACK
(8) ttls : Received TLS ACK
(8) ttls : ACK handshake fragment handler
(8) ttls : eaptls_verify returned 1
(8) ttls : eaptls_process returned 13
(8)   [eap] = handled
Sending Access-Challenge of id 233 to 10.190.0.2 port 1812
         EAP-Message = 
0x0104040015c000000aad00ec1d720e4a7e8a98300d06092a864886f70d0101050500308193
310b3009060355040613024652310f300d060355040813065261646975733112301006035504
071309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e312030
1e06092a864886f70d010901161161646d696e406578616d706c652e636f6d31263024060355
0403131d4578616d706c6520436572746966696361746520417574686f72697479301e170d31
31313031333039353734375a170d3132313031323039353734375a308193310b300906035504
0613024652310f300d0603550408130652616469757331123010
         EAP-Message = 
0x06035504071309536f6d65776865726531153013060355040a130c4578616d706c6520496e
632e3120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d3126
30240603550403131d4578616d706c6520436572746966696361746520417574686f72697479
30820122300d06092a864886f70d01010105000382010f003082010a0282010100be734cc62e
cb7177f45d9f49d0dc7c67f1e8f71f9ad048dd67a12de738c98729d524e687e47b801bf912a3
ce76ff5c35cbbae16eed0733b5e51b53633123803af7f8bdb2a456b82f3c022ab8aa75e09e55
f898044a1de747799af4506d191327f3cb2fd28c87d277828b1b
         EAP-Message = 
0x5372af25f28e4dc8ece69051878c673e3036fad0165be210ee1e208c762dbd201af930f8d3
0c2d8e1f112afa92bec4462e0f812d645e0572c991a9f1ff3fb7938f9aa1c92db6464ea6025f
c34af023dc152c09ac6074742f3b1766cfca4c352255553bea37de71ea152bb306cd1893e111
19326b7a5bdf957fc90726ffcf49b542285aeda0480ced4f180547fe0449400dfd786fc50203
010001a381fb3081f8301d0603551d0e04160414b57317268d6d7a07453f567b60d8e38ab31a
f2a13081c80603551d230481c03081bd8014b57317268d6d7a07453f567b60d8e38ab31af2a1
a18199a48196308193310b3009060355040613024652310f300d
         EAP-Message = 
0x060355040813065261646975733112301006035504071309536f6d65776865726531153013
060355040a130c4578616d706c6520496e632e3120301e06092a864886f70d01090116116164
6d696e406578616d706c652e636f6d312630240603550403131d4578616d706c652043657274
6966696361746520417574686f72697479820900ec1d720e4a7e8a98300c0603551d13040530
030101ff300d06092a864886f70d010105050003820101000145888b12dc92a1ae57d9cf122d
90702ccf6fdeacf92f4e46bdab9773d80bb5373ddacd234f03fd8d8f8587b515ba24b28931ff
ec882ad044f8bc07f3c510b90f86e302639082c1d1fbc9fd9d2b
         EAP-Message = 0x29f6a43153b63396708d1c2a
         Message-Authenticator = 0x00000000000000000000000000000000
         State = 0xfdcbcc4affcfd9fe908aaa2f4bb4f780
(8) Finished request 8.

-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html