Alan, iptables -L -n output shows Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination tcpdump shows nothing when I am trying to connect. However, ifconfig shows eth0 has the wrong IP address. It looks like it grabbed a DHCP address from my Windows DHCP server. When I look at eth0 connection properties on the task bar it shows 172.16.3.4. In /etc/hosts, under System Administration Network Configuration, and on my DNS server, it is 172.16.1.15. How do I stop it from using the wrong address? I see in docs there is a file called /var/lib/dhclient/eth0-leases which contains the bad config info. Orion, client file is correct, for the 172.16.1.15 address, anyway. :-\ Greg, server is not multihomed, but multi-ip addresses do appear to be the problem. Hi,
Hi All,
I have freeradius 1.1.7 running on RHEL 5. radtest works with a local
user setup, and also with authentication via Active Directory. However, anything outside the radius server host does not get a reply.
I have configured a Multitech MA820 and also tried ntradping, and both
get the same results - "Could not receive a response from server" is the message when I use ntradping, and "Server did not respond in a timely manner" is the response when I try to connect from the Multitech.
Is there some setting I need to check to make sure external access is enabled?
iptables? your host is firewalled and therefore FR doesnt see the packet at all? tcpdump -eqntl -i eth0 port 1812 (if eth0 is your NIC) then do some stuff. do you see anything? iptables -L -n are there entries? if so, ensure there are 1812/1813/1814 UDP entries too! alan ------------------------------ Message: 2 Date: Tue, 5 Aug 2008 19:17:40 +0200 From: orion <meshkruaj@gmail.com> Subject: Re: Server not responding to requests To: "FreeRadius users mailing list" <freeradius-users@lists.freeradius.org> Message-ID: <6e3e383b0808051017t128c3b53qfee7fad6b0558679@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1 take a look at client file. there you can specify which clients ( IP addresses ) are allowed . add the public ip of your outside clients/nas. 2008/8/5 Yoho, Cindy <Cyoho@umpublishing.org>:
Hi All,
I have freeradius 1.1.7 running on RHEL 5. radtest works with a local
user setup, and also with authentication via Active Directory. However, anything outside the radius server host does not get a reply.
I have configured a Multitech MA820 and also tried ntradping, and both
get the same results - "Could not receive a response from server" is the message when I use ntradping, and "Server did not respond in a timely manner" is the response when I try to connect from the Multitech.
Is there some setting I need to check to make sure external access is enabled?
Thanks in advance ~
Cindy Yoho Systems Engineer United Methodist Publishing House Nashville, TN
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html