Hi
To reply to Alan Dekok here is the debug log
Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/raddb/proxy.conf Config: including file: /etc/raddb/clients.conf Config: including file: /etc/raddb/snmp.conf Config: including file: /etc/raddb/eap.conf Config: including file: /etc/raddb/sql.conf main: prefix = "/usr" main: localstatedir = "/var" main: logdir = "/var/log/radius" main: libdir = "/usr/lib" main: radacctdir = "/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = yes main: log_file = "/var/log/radius/radius.log" main: log_auth = yes main: log_auth_badpass = yes main: log_auth_goodpass = yes main: pidfile = "/var/run/radiusd/radiusd.pid" main: user = "(null)" main: group = "(null)" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = yes proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: authtype = "MS-CHAPv2" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "(null)" unix: group = "(null)" unix: radwtmp = "/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "ttls" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/etc/raddb/certs/intermec/server.pem" tls: certificate_file = "/etc/raddb/certs/intermec/server.pem" tls: CA_file = "/etc/raddb/certs/intermec/cacert.cer" tls: private_key_password = "BigSecretPass" tls: dh_file = "/dev/null" tls: random_file = "/dev/urandom" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "(null)" rlm_eap: Loaded and initialized type tls ttls: default_eap_type = "mschapv2" ttls: copy_request_to_tunnel = no ttls: use_tunneled_reply = no rlm_eap: Loaded and initialized type ttls peap: default_eap_type = "mschapv2" peap: copy_request_to_tunnel = no peap: use_tunneled_reply = no peap: proxy_tunneled_request_as_eap = yes rlm_eap: Loaded and initialized type peap mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/etc/raddb/huntgroups" preprocess: hints = "/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded detail detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (auth_log) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/etc/raddb/users" files: acctusersfile = "/etc/raddb/acct_users" files: preproxy_usersfile = "/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. rad_recv: Access-Request packet from host 192.168.0.1:1024, id=6, length=134 User-Name = "anonymous" NAS-IP-Address = 192.168.0.1 Called-Station-Id = "00-10-40-01-90-09" NAS-Identifier = "31100100221" NAS-Port-Type = Wireless-802.11 Framed-MTU = 1400 Calling-Station-Id = "00-02-2d-3c-ef-79" EAP-Message = 0x0200000e01616e6f6e796d6f7573 Message-Authenticator = 0x61efabf1e39ae3a5983e1b7c7ed39037 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 radius_xlat: '/var/log/radius/radacct/192.168.0.1/auth-detail-20060216' rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/192.168.0.1/auth-detail-20060216 modcall[authorize]: module "auth_log" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "anonymous", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 0 length 14 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 modcall[authorize]: module "files" returns notfound for request 0 modcall: group authorize returns updated for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 0 modcall: group authenticate returns handled for request 0 Sending Access-Challenge of id 6 to 192.168.0.1:1024 EAP-Message = 0x010100061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8101bb02421a224e415fb643fd5a5a70 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 6 with timestamp 43f489f3 Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 192.168.0.1:1024, id=7, length=210 State = 0x8101bb02421a224e415fb643fd5a5a70 User-Name = "anonymous" NAS-IP-Address = 192.168.0.1 Called-Station-Id = "00-10-40-01-90-09" NAS-Identifier = "31100100221" NAS-Port-Type = Wireless-802.11 Framed-MTU = 1400 Calling-Station-Id = "00-02-2d-3c-ef-79" EAP-Message = 0x020100481500160301003d01000039030143ea8be941bd45d21f3b9c251cd225b597150a6d8b46a8ff186ca6f97e3436e5000012000a000500040064006200600009000800030100 Message-Authenticator = 0xd071d95101e82c9471633db7d877d373 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 radius_xlat: '/var/log/radius/radacct/192.168.0.1/auth-detail-20060216' rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/192.168.0.1/auth-detail-20060216 modcall[authorize]: module "auth_log" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "anonymous", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: EAP packet type response id 1 length 72 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 modcall[authorize]: module "files" returns notfound for request 1 modcall: group authorize returns updated for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP/ttls rlm_eap: processing type ttls rlm_eap_ttls: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 003d], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0446], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone TLS_accept: SSLv3 write server done A TLS_accept: SSLv3 flush data TLS_accept:error in SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 modcall[authenticate]: module "eap" returns handled for request 1 modcall: group authenticate returns handled for request 1 Sending Access-Challenge of id 7 to 192.168.0.1:1024 EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 0x746564204365727469666963617465301d0603551d0e04160414b7bbf4e9358908fc1b817d12dfb865725d5624053081e90603551d230481e13081de801427af545487c3c798e81afe4597a2b63ac07881f5a181c2a481bf3081bc310b3009060355040613025553311330110603550408130a57617368696e67746f6e3110300e0603550407130745766572657474312a3028060355040a1321496e7465726d656320546563686e6f6c6f6769657320436f72706f726174696f6e311d301b060355040b1314536563757269747920456e67696e656572696e67313b303906035504031332496e7465726d656320546563686e6f6c6f6769657320436f
EAP-Message = 0x72706f726174696f6e20526f6f742043657274696669 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd25d03bb73b96d7b492916c20bbf44c2 Finished request 1 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.0.1:1024, id=8, length=144 State = 0xd25d03bb73b96d7b492916c20bbf44c2 User-Name = "anonymous" NAS-IP-Address = 192.168.0.1 Called-Station-Id = "00-10-40-01-90-09" NAS-Identifier = "31100100221" NAS-Port-Type = Wireless-802.11 Framed-MTU = 1400 Calling-Station-Id = "00-02-2d-3c-ef-79" EAP-Message = 0x020200061500 Message-Authenticator = 0x32438ef113d8e8232b1ad69ffa9ef400 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 radius_xlat: '/var/log/radius/radacct/192.168.0.1/auth-detail-20060216' rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/192.168.0.1/auth-detail-20060216 modcall[authorize]: module "auth_log" returns ok for request 2 modcall[authorize]: module "chap" returns noop for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_realm: No '@' in User-Name = "anonymous", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 2 rlm_eap: EAP packet type response id 2 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 2 modcall[authorize]: module "files" returns notfound for request 2 modcall: group authorize returns updated for request 2 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 2 rlm_eap: Request found, released from the list rlm_eap: EAP/ttls rlm_eap: processing type ttls rlm_eap_ttls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 modcall[authenticate]: module "eap" returns handled for request 2 modcall: group authenticate returns handled for request 2 Sending Access-Challenge of id 8 to 192.168.0.1:1024 EAP-Message = 0x010300ad1580000004a363617465820101300d06092a864886f70d01010505000381810017814c3dc897e685aee5e734509712728a2cf5d4cce575147bcc0f974af3477fbd8d202d1f173ac76c03925e6870be35567d27e84d8096458dad6b99cdcf66e6d5967e920a64e0a4dacb6cee087b3768725bae1784d29ad41311bfb9e4dc8ade93390fe481def6c25a60c3c3d1e883e024d279fc6cbbe3723af4a76cfc0c9d6c16030100040e000000
Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8c3b86d02966b223e117138d5c1d946e Finished request 2 Going to the next request Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 1 ID 7 with timestamp 43f489f9 Cleaning up request 2 ID 8 with timestamp 43f489f9 Nothing to do. Sleeping until we see a request.
My eap.conf
eap { default_eap_type = ttls timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no
md5 { }
leap { }
gtc { #challenge = "Password: " #auth_type = PAP }
tls { private_key_password = BigSecretPassword private_key_file = ${raddbdir}/certs/intermec/server.pem certificate_file = ${raddbdir}/certs/intermec/server.pem CA_file = ${raddbdir}/certs/intermec/cacert.cer dh_file = /dev/null random_file = /dev/urandom fragment_size = 1024 include_length = yes check_crl = no #check_cert_cn = %{User-Name} } ttls { default_eap_type = mschapv2 #default_eap_type = md5 copy_request_to_tunnel = no use_tunneled_reply = no }
Users
gun Auth-Type := EAP, User-Password := "gun123"