Dear Alan, Thank you for the quick reply. Indeed, on WinXP I was using the Funk Odyssey client as it offered a good debug log. However, I tested using different supplicants like IntelPROSet on WinXP and the OSX 10.4 built-in supplicant with consistent results. I even tried a LinkSys WAP54G Fat AP firmware v3.04, as well as the Aruba switch with its thin AP with no difference in the results. I would certainly appreciate any tips on the possible workarounds you mentioned. Thx Mak -----Original Message----- From: freeradius-users-bounces+mmoussa=mmoussa.com@lists.freeradius.org [mailto:freeradius-users-bounces+mmoussa=mmoussa.com@lists.freeradius.org] On Behalf Of Alan DeKok Sent: Thursday, October 05, 2006 8:05 AM To: FreeRadius users mailing list Subject: Re: Any luck with 802.1x authentication using TTLS with MSCHAPv2 ? "Mak Moussa" <mmoussa@mmoussa.com> wrote:
I would appreciate any insight into the 802.1x authentication using TTLS with MSCHAPv2. Such auth scheme is constantly failing in my wireless setup with FreeRadius. I tried 3 versions v1.0.5, v1.1.2 and v1.1.3 with not much luck.
OK...
The following authentication schemes worked fine: 1. TTLS w/ MSCHAP from my wireless client to freeradius v1.0.5, v1.1.2, v1.1.3 2. PEAP w/ MSCHAPv2 with same wireless client to same freeradius versions. 3. TTLS w/ MSCHAPv2 from the same wireless setup to an SBR v5.3
OK.
If I made a freeradius configuration mistake, TTLS with mschap wouldn't work.
Hmm... it may be that the MSCHAPv2 support in the TTLS code needs work. I haven't looked at it recently, but I do recall some work-arounds.. Which client are you using? It looks like Windows, but Windows doesn't support TTLS natively, so you're obviously doing something special. Alan DeKok. -- http://deployingradius.com - The web site of the book http://deployingradius.com/blog/ - The blog - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html