Re: Windows cannot authenticate with Freeradius

6 Sep 2017


      Resending since the other one was rejected for being long. Apologies

On 5 September 2017 at 22:19, Matthew Pulis <mpulis@gmail.com> wrote:
...
Dear all
Many many thanks for your support. We are moving towards a complete
solution :)
Windows 10 works fine without the need to install a certificate. The
certificates on the server were all expired so I renewed everything and Win
10 worked out of the box - no need to install anything.
Windows 7 is different. I pushed ca.der to the Win 7 client. Installed it
using cert util and double checked it via mmc.
Before connecting this is the warning the network showed: The server "The
Seminary Local Certificate Authority" presented a valid certificate issued
by "The Seminary Local Certificate Authority", but "The Seminary Local
Certificate Authority" is not configured as a valid trust anchor for this
profile. Further, the server "The Seminary Local Certificate Authority" is
not configured as a valid NPS server to connect to for this profile.
It seems to be a problem with Win 7. Do you have any pointers? Should I
enable MSCHAPv2 too? or is there something for EAP please?
Should something like this work: https://documentation.
meraki.com/MR/Encryption_and_Authentication/Enabling_EAP-TLS_in_Windows_7?
Thanks a lot for your help and support!
This is the full log
radius@radius:~$ sudo freeradius -X
FreeRADIUS Version 3.0.15
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/dictionary
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/mods-enabled/
including configuration file /etc/freeradius/mods-enabled/mschap
including configuration file /etc/freeradius/mods-enabled/adldap
including configuration file /etc/freeradius/mods-enabled/always
including configuration file /etc/freeradius/mods-enabled/soh
including configuration file /etc/freeradius/mods-enabled/eap
including configuration file /etc/freeradius/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/mods-enabled/logintime
including configuration file /etc/freeradius/mods-enabled/exec
including configuration file /etc/freeradius/mods-enabled/realm
including configuration file /etc/freeradius/mods-enabled/utf8
including configuration file /etc/freeradius/mods-enabled/date
including configuration file /etc/freeradius/mods-enabled/echo
including configuration file /etc/freeradius/mods-enabled/unix
including configuration file /etc/freeradius/mods-enabled/detail.log
including configuration file /etc/freeradius/mods-enabled/expr
including configuration file /etc/freeradius/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/mods-enabled/pap
including configuration file /etc/freeradius/mods-enabled/ldap
including configuration file /etc/freeradius/mods-enabled/digest
including configuration file /etc/freeradius/mods-enabled/files
including configuration file /etc/freeradius/mods-enabled/preprocess
including configuration file /etc/freeradius/mods-enabled/cache_eap
including configuration file /etc/freeradius/mods-enabled/detail
including configuration file /etc/freeradius/mods-enabled/expiration
including configuration file /etc/freeradius/mods-enabled/chap
including configuration file /etc/freeradius/mods-enabled/sradutmp
including configuration file /etc/freeradius/mods-enabled/radutmp
including configuration file /etc/freeradius/mods-enabled/passwd
including configuration file /etc/freeradius/mods-enabled/linelog
including configuration file /etc/freeradius/mods-enabled/unpack
including configuration file /etc/freeradius/mods-enabled/attr_filter
including configuration file /etc/freeradius/mods-enabled/replicate
including files in directory /etc/freeradius/policy.d/
including configuration file /etc/freeradius/policy.d/filter
including configuration file /etc/freeradius/policy.d/control
including configuration file /etc/freeradius/policy.d/canonicalization
including configuration file /etc/freeradius/policy.d/eap
including configuration file /etc/freeradius/policy.d/debug
including configuration file /etc/freeradius/policy.d/dhcp
including configuration file /etc/freeradius/policy.d/
moonshot-targeted-ids
including configuration file /etc/freeradius/policy.d/accounting
including configuration file /etc/freeradius/policy.d/abfab-tr
including configuration file /etc/freeradius/policy.d/cui
including configuration file /etc/freeradius/policy.d/operator-name
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/default
main {
 security {
        user = "freerad"
        group = "freerad"
        allow_core_dumps = no
 }
        name = "freeradius"
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/freeradius"
        run_dir = "/var/run/freeradius"
}
main {
        name = "freeradius"
        prefix = "/usr"
        localstatedir = "/var"
        sbindir = "/usr/sbin"
        logdir = "/var/log/freeradius"
        run_dir = "/var/run/freeradius"
        libdir = "/usr/lib/freeradius"
        radacctdir = "/var/log/freeradius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 16384
        pidfile = "/var/run/freeradius/freeradius.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
        colourise = yes
        msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
        max_attributes = 200
        reject_delay = 1.000000
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 home_server localhost {
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = <<< secret >>>
        response_window = 20.000000
        response_timeouts = 1
        max_outstanding = 65536
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        check_timeout = 4
        num_answers_to_alive = 3
        revive_interval = 120
  limit {
        max_connections = 16
        max_requests = 0
        lifetime = 0
        idle_timeout = 0
  }
  coa {
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
  }
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = <<< secret >>>
        nas_type = "other"
        proto = "*"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client localhost_ipv6 {
        ipv6addr = ::1
        require_message_authenticator = no
        secret = <<< secret >>>
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client 192.168.100.1/24 {
        require_message_authenticator = no
        secret = <<< secret >>>
        shortname = "NAS"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
192.168.100.1/24. Please fix your configuration
Support for old-style clients will be removed in a future release
Debugger not attached
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Auth-Type = digest
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = yes
   passchange {
   }
        allow_retry = yes
        winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_ldap
  # Loading module "adldap" from file /etc/freeradius/mods-enabled/adldap
  ldap adldap {
        server = "localhost"
        identity = "cn=admin,dc=seminary,dc=local"
        password = <<< secret >>>
   sasl {
   }
   user {
        scope = "sub"
        access_positive = yes
    sasl {
    }
   }
   group {
        filter = "(objectClass=posixGroup)"
        scope = "sub"
        name_attribute = "cn"
        membership_attribute = "memberOf"
        cacheable_name = no
        cacheable_dn = no
   }
   client {
        filter = "(objectClass=radiusClient)"
        scope = "sub"
        base_dn = "ou=School,dc=seminary,dc=ad"
   }
   profile {
   }
   options {
        ldap_debug = 40
        chase_referrals = yes
        rebind = yes
        net_timeout = 1
        res_timeout = 10
        srv_timelimit = 3
        idle = 60
        probes = 3
        interval = 3
   }
   tls {
        start_tls = no
   }
  }
Creating attribute adldap-LDAP-Group
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/freeradius/mods-enabled/always
  always reject {
        rcode = "reject"
        simulcount = 0
        mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/mods-enabled/always
  always fail {
        rcode = "fail"
        simulcount = 0
        mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/mods-enabled/always
  always ok {
        rcode = "ok"
        simulcount = 0
        mpp = no
  }
  # Loading module "handled" from file /etc/freeradius/mods-enabled/always
  always handled {
        rcode = "handled"
        simulcount = 0
        mpp = no
  }
  # Loading module "invalid" from file /etc/freeradius/mods-enabled/always
  always invalid {
        rcode = "invalid"
        simulcount = 0
        mpp = no
  }
  # Loading module "userlock" from file /etc/freeradius/mods-enabled/
always
  always userlock {
        rcode = "userlock"
        simulcount = 0
        mpp = no
  }
  # Loading module "notfound" from file /etc/freeradius/mods-enabled/
always
  always notfound {
        rcode = "notfound"
        simulcount = 0
        mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/mods-enabled/always
  always noop {
        rcode = "noop"
        simulcount = 0
        mpp = no
  }
  # Loading module "updated" from file /etc/freeradius/mods-enabled/always
  always updated {
        rcode = "updated"
        simulcount = 0
        mpp = no
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/mods-enabled/soh
  soh {
        dhcp = yes
  }
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/mods-enabled/eap
  eap {
        default_eap_type = "ttls"
        timer_expire = 60
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 16384
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file
/etc/freeradius/mods-enabled/dynamic_clients
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/freeradius/mods-enabled/
logintime
  logintime {
        minimum_timeout = 60
  }
  # Loaded module rlm_exec
  # Loading module "exec" from file /etc/freeradius/mods-enabled/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
        timeout = 10
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
  realm IPASS {
        format = "prefix"
        delimiter = "/"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/
realm
  realm realmpercent {
        format = "suffix"
        delimiter = "%"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
  realm ntdomain {
        format = "prefix"
        delimiter = "\\"
        ignore_default = no
        ignore_null = no
  }
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
  # Loaded module rlm_date
  # Loading module "date" from file /etc/freeradius/mods-enabled/date
  date {
        format = "%b %e %Y %H:%M:%S %Z"
        utc = no
  }
  # Loading module "echo" from file /etc/freeradius/mods-enabled/echo
  exec echo {
        wait = yes
        program = "/bin/echo %{User-Name}"
        input_pairs = "request"
        output_pairs = "reply"
        shell_escape = yes
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/mods-enabled/unix
  unix {
        radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_detail
  # Loading module "auth_log" from file /etc/freeradius/mods-enabled/
detail.log
  detail auth_log {
        filename = "/var/log/freeradius/radacct/%
{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/freeradius/mods-enabled/
detail.log
  detail reply_log {
        filename = "/var/log/freeradius/radacct/%
{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/
reply-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/
detail.log
  detail pre_proxy_log {
        filename = "/var/log/freeradius/radacct/%
{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-
proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/
detail.log
  detail post_proxy_log {
        filename = "/var/log/freeradius/radacct/%
{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/
post-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/mods-enabled/expr
  expr {
        safe_characters = "@abcdefghijklmnopqrstuvwxyzABCD
EFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇ
ÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/
ntlm_auth
  exec ntlm_auth {
        wait = yes
        program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
        shell_escape = yes
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/mods-enabled/pap
  pap {
        normalise = yes
  }
  # Loading module "ldap" from file /etc/freeradius/mods-enabled/ldap
  ldap {
        server = "localhost"
        identity = "cn=admin,dc=seminary,dc=local"
        password = <<< secret >>>
   sasl {
   }
   user {
        scope = "sub"
        access_positive = yes
    sasl {
    }
   }
   group {
        filter = "(objectClass=posixGroup)"
        scope = "sub"
        name_attribute = "cn"
        membership_attribute = "memberOf"
        cacheable_name = no
        cacheable_dn = no
   }
   client {
        filter = "(objectClass=radiusClient)"
        scope = "sub"
        base_dn = "ou=SeminaryOU,dc=seminary,dc=local"
   }
   profile {
   }
   options {
        ldap_debug = 40
        chase_referrals = yes
        rebind = yes
        net_timeout = 1
        res_timeout = 10
        srv_timelimit = 3
        idle = 60
        probes = 3
        interval = 3
   }
   tls {
        start_tls = no
   }
  }
Creating attribute LDAP-Group
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/freeradius/mods-enabled/digest
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/mods-enabled/files
  files {
        filename = "/etc/freeradius/mods-config/files/authorize"
        acctusersfile = "/etc/freeradius/mods-config/files/accounting"
        preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/freeradius/mods-enabled/
preprocess
  preprocess {
        huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
        hints = "/etc/freeradius/mods-config/preprocess/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/
cache_eap
  cache cache_eap {
        driver = "rlm_cache_rbtree"
        key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
        ttl = 15
        max_entries = 0
        epoch = 0
        add_stats = no
  }
  # Loading module "detail" from file /etc/freeradius/mods-enabled/detail
  detail {
        filename = "/var/log/freeradius/radacct/%
{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/freeradius/mods-enabled/
expiration
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/mods-enabled/chap
  # Loaded module rlm_radutmp
  # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/
sradutmp
  radutmp sradutmp {
        filename = "/var/log/freeradius/sradutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 420
        caller_id = no
  }
  # Loading module "radutmp" from file /etc/freeradius/mods-enabled/
radutmp
  radutmp {
        filename = "/var/log/freeradius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 384
        caller_id = yes
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/
passwd
  passwd etc_passwd {
        filename = "/etc/passwd"
        format = "*User-Name:Crypt-Password:"
        delimiter = ":"
        ignore_nislike = no
        ignore_empty = yes
        allow_multiple_keys = no
        hash_size = 100
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/freeradius/mods-enabled/
linelog
  linelog {
        filename = "/var/log/freeradius/linelog"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = "This is a log message for %{User-Name}"
        reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/
linelog
  linelog log_accounting {
        filename = "/var/log/freeradius/linelog-accounting"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = ""
        reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
        filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
        filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
        filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
        filename = "/etc/freeradius/mods-config/
attr_filter/access_challenge"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
        filename = "/etc/freeradius/mods-config/attr_filter/accounting_
response"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/freeradius/mods-enabled/
replicate
  instantiate {
  }
  # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/
mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "adldap" from file /etc/freeradius/mods-enabled/
adldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20442
   accounting {
        reference = "%{tolower:type.%{Acct-Status-Type}}"
   }
   post-auth {
        reference = "."
   }
rlm_ldap (adldap): Initialising connection pool
   pool {
        start = 5
        min = 3
        max = 32
        spare = 10
        uses = 0
        lifetime = 0
        cleanup_interval = 30
        idle_timeout = 60
        retry_delay = 30
        spread = no
   }
rlm_ldap (adldap): Opening additional connection (0), 1 of 32 pending
slots used
rlm_ldap (adldap): Connecting to ldap://localhost:389
rlm_ldap (adldap): Waiting for bind result...
rlm_ldap (adldap): Bind successful
rlm_ldap (adldap): Opening additional connection (1), 1 of 31 pending
slots used
rlm_ldap (adldap): Connecting to ldap://localhost:389
rlm_ldap (adldap): Waiting for bind result...
rlm_ldap (adldap): Bind successful
rlm_ldap (adldap): Opening additional connection (2), 1 of 30 pending
slots used
rlm_ldap (adldap): Connecting to ldap://localhost:389
rlm_ldap (adldap): Waiting for bind result...
rlm_ldap (adldap): Bind successful
rlm_ldap (adldap): Opening additional connection (3), 1 of 29 pending
slots used
rlm_ldap (adldap): Connecting to ldap://localhost:389
rlm_ldap (adldap): Waiting for bind result...
rlm_ldap (adldap): Bind successful
rlm_ldap (adldap): Opening additional connection (4), 1 of 28 pending
slots used
rlm_ldap (adldap): Connecting to ldap://localhost:389
rlm_ldap (adldap): Waiting for bind result...
rlm_ldap (adldap): Bind successful
  # Instantiating module "reject" from file /etc/freeradius/mods-enabled/
always
  # Instantiating module "fail" from file /etc/freeradius/mods-enabled/
always
  # Instantiating module "ok" from file /etc/freeradius/mods-enabled/
always
  # Instantiating module "handled" from file /etc/freeradius/mods-enabled/
always
  # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/
always
  # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/
always
  # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/
always
  # Instantiating module "noop" from file /etc/freeradius/mods-enabled/
always
  # Instantiating module "updated" from file /etc/freeradius/mods-enabled/
always
  # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
        tls = "tls-common"
   }
   tls-config tls-common {
        verify_depth = 0
        ca_path = "/etc/freeradius/certs"
        pem_file_type = yes
        private_key_file = "/etc/freeradius/certs/server.pem"
        certificate_file = "/etc/freeradius/certs/server.pem"
        ca_file = "/etc/freeradius/certs/ca.pem"
        private_key_password = <<< secret >>>
        dh_file = "/etc/freeradius/certs/dh"
        random_file = "/dev/urandom"
        fragment_size = 1024
        include_length = yes
        auto_chain = yes
        check_crl = no
        check_all_crl = no
        cipher_list = "DEFAULT"
        ecdh_curve = "prime256v1"
    cache {
        enable = yes
        lifetime = 24
        max_entries = 255
    }
    verify {
        skip_if_ocsp_ok = no
    }
    ocsp {
        enable = no
        override_cert_url = yes
        url = "http://127.0.0.1/ocsp/"
        use_nonce = yes
        timeout = 0
        softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
        tls = "tls-common"
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = yes
        virtual_server = "inner-tunnel"
        include_length = yes
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
        tls = "tls-common"
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = yes
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
        soh = no
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
        with_ntdomain_hack = no
        send_error = no
   }
  # Instantiating module "logintime" from file
/etc/freeradius/mods-enabled/logintime
  # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/
realm
  # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/
realm
  # Instantiating module "realmpercent" from file
/etc/freeradius/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/
realm
  # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/
detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/freeradius/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
  # Instantiating module "ldap" from file /etc/freeradius/mods-enabled/
ldap
   accounting {
        reference = "%{tolower:type.%{Acct-Status-Type}}"
   }
   post-auth {
        reference = "."
   }
rlm_ldap (ldap): Initialising connection pool
   pool {
        start = 5
        min = 3
        max = 32
        spare = 10
        uses = 0
        lifetime = 0
        cleanup_interval = 30
        idle_timeout = 60
        retry_delay = 30
        spread = no
   }
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots
used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots
used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots
used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots
used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots
used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
  # Instantiating module "files" from file /etc/freeradius/mods-enabled/
files
reading pairlist file /etc/freeradius/mods-config/files/authorize
reading pairlist file /etc/freeradius/mods-config/files/accounting
reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
  # Instantiating module "preprocess" from file
/etc/freeradius/mods-enabled/preprocess
reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/mods-config/preprocess/hints
  # Instantiating module "cache_eap" from file
/etc/freeradius/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
loaded and linked
  # Instantiating module "detail" from file /etc/freeradius/mods-enabled/
detail
  # Instantiating module "expiration" from file
/etc/freeradius/mods-enabled/expiration
  # Instantiating module "etc_passwd" from file
/etc/freeradius/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/
linelog
  # Instantiating module "log_accounting" from file
/etc/freeradius/mods-enabled/linelog
  # Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/
attr_filter/access_reject
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay"       found in filter list for realm "DEFAULT".
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay-USec"  found in filter list for realm
"DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/
attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_
response
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
} # server
server inner-tunnel { # from file /etc/freeradius/sites-enabled/
inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
} # server inner-tunnel
server default { # from file /etc/freeradius/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = 127.0.0.1
        port = 18120
}
listen {
        type = "auth"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "auth"
        ipv6addr = ::
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipv6addr = ::
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 37387
Listening on proxy address :: port 45616
Ready to process requests
TRYING TO LOG IN FROM WINDOWS 7
(0) Received Access-Request Id 1 from 192.168.100.113:34296 to
192.168.100.201:1812 length 189
(0)   User-Name = "bchristopher848"
(0)   NAS-IP-Address = 10.0.150.19
(0)   NAS-Identifier = "802aa849d031"
(0)   NAS-Port = 0
(0)   Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
(0)   Calling-Station-Id = "00-22-FB-6E-1D-C8"
(0)   Framed-MTU = 1400
(0)   NAS-Port-Type = Wireless-802.11
(0)   Connect-Info = "CONNECT 0Mbps 802.11b"
(0)   EAP-Message = 0x0269001401626368726973746f70686572383438
(0)   Message-Authenticator = 0x60dc6e98028e3f9af87c442e20dbd98b
(0) # Executing section authorize from file /etc/freeradius/sites-enabled/
default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 105 length 20
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_ttls to process data
(0) eap_ttls: Initiating new EAP-TLS session
(0) eap_ttls: Flushing SSL sessions (of #0)
(0) eap_ttls: [eaptls start] = request
(0) eap: Sending EAP Request (code 1) ID 106 length 6
(0) eap: EAP session adding &reply:State = 0xb5449406b52e8100
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) Post-Auth-Type sub-section not found.  Ignoring.
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0) Sent Access-Challenge Id 1 from 192.168.100.201:1812 to
192.168.100.113:34296 length 0
(0)   EAP-Message = 0x016a00061520
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0xb5449406b52e81001eb003264d869845
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 2 from 192.168.100.113:34296 to
192.168.100.201:1812 length 193
(1)   User-Name = "bchristopher848"
(1)   NAS-IP-Address = 10.0.150.19
(1)   NAS-Identifier = "802aa849d031"
(1)   NAS-Port = 0
(1)   Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
(1)   Calling-Station-Id = "00-22-FB-6E-1D-C8"
(1)   Framed-MTU = 1400
(1)   NAS-Port-Type = Wireless-802.11
(1)   Connect-Info = "CONNECT 0Mbps 802.11b"
(1)   EAP-Message = 0x026a00060319
(1)   State = 0xb5449406b52e81001eb003264d869845
(1)   Message-Authenticator = 0x9229ace477f82c7e771de427669cfad1
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/freeradius/sites-enabled/
default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 106 length 6
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1)     [eap] = updated
(1)     [files] = noop
rlm_ldap (ldap): Reserved connection (0)
(1) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
(1) ldap:    --> (cn=bchristopher848)
(1) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with
filter "(cn=bchristopher848)", scope "sub"
(1) ldap: Waiting for search result...
(1) ldap: User object found at DN "cn=bchristopher848,cn=
Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
(1) ldap: Processing user attributes
(1) ldap: control:Password-With-Header += '{ssha}o1fjrtGMqroWxrIgC8G/
jwK8GK5BxvANe+pK7w=='
rlm_ldap (ldap): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots
used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(1)     [ldap] = updated
rlm_ldap (adldap): Reserved connection (0)
(1) adldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
(1) adldap:    --> (cn=bchristopher848)
(1) adldap: Performing search in "ou=School,dc=seminary,dc=ad" with filter
"(cn=bchristopher848)", scope "sub"
(1) adldap: Waiting for search result...
(1) adldap: The specified DN wasn't found
(1) adldap: Search returned no results
rlm_ldap (adldap): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_ldap (adldap): Opening additional connection (5), 1 of 27 pending
slots used
rlm_ldap (adldap): Connecting to ldap://localhost:389
rlm_ldap (adldap): Waiting for bind result...
rlm_ldap (adldap): Bind successful
(1)     [adldap] = notfound
(1)     [expiration] = noop
(1)     [logintime] = noop
(1) pap: Converted: &control:Password-With-Header ->
&control:SSHA1-Password
(1) pap: Removing &control:Password-With-Header
(1) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28
bytes
(1) pap: WARNING: Auth-Type already set.  Not setting to PAP
(1)     [pap] = noop
(1)   } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0xb5449406b52e8100
(1) eap: Finished EAP session with state 0xb5449406b52e8100
(1) eap: Previous EAP request found for state 0xb5449406b52e8100, released
from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Initiating new EAP-TLS session
(1) eap_peap: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 107 length 6
(1) eap: EAP session adding &reply:State = 0xb5449406b42f8d00
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) Post-Auth-Type sub-section not found.  Ignoring.
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1) Sent Access-Challenge Id 2 from 192.168.100.201:1812 to
192.168.100.113:34296 length 0
(1)   EAP-Message = 0x016b00061920
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0xb5449406b42f8d001eb003264d869845
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 3 from 192.168.100.113:34296 to
192.168.100.201:1812 length 300
(2)   User-Name = "bchristopher848"
(2)   NAS-IP-Address = 10.0.150.19
(2)   NAS-Identifier = "802aa849d031"
(2)   NAS-Port = 0
(2)   Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
(2)   Calling-Station-Id = "00-22-FB-6E-1D-C8"
(2)   Framed-MTU = 1400
(2)   NAS-Port-Type = Wireless-802.11
(2)   Connect-Info = "CONNECT 0Mbps 802.11b"
(2)   EAP-Message = 0x026b007119800000006716030100
620100005e030159af03804becec9c3cef8903818c79121606d4cc4552b8
68a83f76270fc4ef9200001cc014c013003900330035002fc00ac0090038
0032000a00130005000401000019000a0006000400170018000b00020100
00170000ff01000100
(2)   State = 0xb5449406b42f8d001eb003264d869845
(2)   Message-Authenticator = 0x03f782e6095d0d07dc5d1122f1876d00
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/freeradius/sites-enabled/
default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 107 length 113
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0xb5449406b42f8d00
(2) eap: Finished EAP session with state 0xb5449406b42f8d00
(2) eap: Previous EAP request found for state 0xb5449406b42f8d00, released
from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: Peer indicated complete TLS record size will be 103 bytes
(2) eap_peap: Got complete TLS record (103 bytes)
(2) eap_peap: [eaptls verify] = length included
(2) eap_peap: (other): before/accept initialization
(2) eap_peap: TLS_accept: before/accept initialization
(2) eap_peap: <<< recv TLS 1.0 Handshake [length 0062], ClientHello
(2) eap_peap: TLS_accept: unknown state
(2) eap_peap: >>> send TLS 1.0 Handshake [length 0059], ServerHello
(2) eap_peap: TLS_accept: unknown state
(2) eap_peap: >>> send TLS 1.0 Handshake [length 0982], Certificate
(2) eap_peap: TLS_accept: unknown state
(2) eap_peap: >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange
(2) eap_peap: TLS_accept: unknown state
(2) eap_peap: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone
(2) eap_peap: TLS_accept: unknown state
(2) eap_peap: TLS_accept: unknown state
(2) eap_peap: TLS_accept: unknown state
(2) eap_peap: TLS_accept: Need to read more data: unknown state
(2) eap_peap: TLS_accept: Need to read more data: unknown state
(2) eap_peap: In SSL Handshake Phase
(2) eap_peap: In SSL Accept mode
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 108 length 1004
(2) eap: EAP session adding &reply:State = 0xb5449406b7288d00
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) Post-Auth-Type sub-section not found.  Ignoring.
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2) Sent Access-Challenge Id 3 from 192.168.100.201:1812 to
192.168.100.113:34296 length 0
(2)   EAP-Message = 0x016c03ec19c000000b3e16030100
5902000055030198325853d6a4ea0a8a0ddc62e8252c55dce33ce836984b
265c5d4a2663c775ad20a5464acc7366d8b86f656371288daf4a0e68ce7f
820f064ff457b9622cb4e509c01400000dff01000100000b000403000102
16030109820b00097e00097b000426
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0xb5449406b7288d001eb003264d869845
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 4 from 192.168.100.113:34296 to
192.168.100.201:1812 length 193
(3)   User-Name = "bchristopher848"
(3)   NAS-IP-Address = 10.0.150.19
(3)   NAS-Identifier = "802aa849d031"
(3)   NAS-Port = 0
(3)   Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
(3)   Calling-Station-Id = "00-22-FB-6E-1D-C8"
(3)   Framed-MTU = 1400
(3)   NAS-Port-Type = Wireless-802.11
(3)   Connect-Info = "CONNECT 0Mbps 802.11b"
(3)   EAP-Message = 0x026c00061900
(3)   State = 0xb5449406b7288d001eb003264d869845
(3)   Message-Authenticator = 0xe754c603a90fd754f21a295dadc62814
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/freeradius/sites-enabled/
default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 108 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0xb5449406b7288d00
(3) eap: Finished EAP session with state 0xb5449406b7288d00
(3) eap: Previous EAP request found for state 0xb5449406b7288d00, released
from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer ACKed our handshake fragment
(3) eap_peap: [eaptls verify] = request
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 109 length 1000
(3) eap: EAP session adding &reply:State = 0xb5449406b6298d00
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) Post-Auth-Type sub-section not found.  Ignoring.
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3) Sent Access-Challenge Id 4 from 192.168.100.201:1812 to
192.168.100.113:34296 length 0
(3)   EAP-Message = 0x016d03e81940380fa68fefb0adb1
60bf876008cdd25df7f1bb575a26398125bf6a36bcf24e3cf136422c1048
b034887efbcce1ad27c885f67ae13c739af72b5bbff6b9f7cc41b9b006ed
dd88d6cf5d54f66bb9884ac2f40853d3af5d741bb79faa72df0324c58d44
8bd2c5583caee59c318907018948f4
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0xb5449406b6298d001eb003264d869845
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 5 from 192.168.100.113:34296 to
192.168.100.201:1812 length 193
(4)   User-Name = "bchristopher848"
(4)   NAS-IP-Address = 10.0.150.19
(4)   NAS-Identifier = "802aa849d031"
(4)   NAS-Port = 0
(4)   Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
(4)   Calling-Station-Id = "00-22-FB-6E-1D-C8"
(4)   Framed-MTU = 1400
(4)   NAS-Port-Type = Wireless-802.11
(4)   Connect-Info = "CONNECT 0Mbps 802.11b"
(4)   EAP-Message = 0x026d00061900
(4)   State = 0xb5449406b6298d001eb003264d869845
(4)   Message-Authenticator = 0x1308f82dd9c153d060e2d3f92f0e47c9
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/freeradius/sites-enabled/
default
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 109 length 6
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0xb5449406b6298d00
(4) eap: Finished EAP session with state 0xb5449406b6298d00
(4) eap: Previous EAP request found for state 0xb5449406b6298d00, released
from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer ACKed our handshake fragment
(4) eap_peap: [eaptls verify] = request
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 110 length 896
(4) eap: EAP session adding &reply:State = 0xb5449406b12a8d00
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) Post-Auth-Type sub-section not found.  Ignoring.
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4) Sent Access-Challenge Id 5 from 192.168.100.201:1812 to
192.168.100.113:34296 length 0
(4)   EAP-Message = 0x016e038019003081b5310b300906
0355040613024d543111300f06035504080c0849722d5261626174311230
1006035504070c0954616c2d566972747531223020060355040a0c195468
652041726368626973686f70732053656d696e6172792e3128302606092a
864886f70d0109011619746563686e
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0xb5449406b12a8d001eb003264d869845
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 6 from 192.168.100.113:34296 to
192.168.100.201:1812 length 331
(5)   User-Name = "bchristopher848"
(5)   NAS-IP-Address = 10.0.150.19
(5)   NAS-Identifier = "802aa849d031"
(5)   NAS-Port = 0
(5)   Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
(5)   Calling-Station-Id = "00-22-FB-6E-1D-C8"
(5)   Framed-MTU = 1400
(5)   NAS-Port-Type = Wireless-802.11
(5)   Connect-Info = "CONNECT 0Mbps 802.11b"
(5)   EAP-Message = 0x026e009019800000008616030100
46100000424104f8835ccc6647e01b6ec2e669280021622082e4c4d31a30
ed462cac3b447792cb9763fb1c6f5547b7650c9216b8a36641f100200f17
d1246ba46fc9eb9cef2cbf140301000101160301003036330cfdd1b9bd52
1432d38a6be17cb4205d318a83802a
(5)   State = 0xb5449406b12a8d001eb003264d869845
(5)   Message-Authenticator = 0x7e43591038f26410ddbfc952608bf3e1
(5) session-state: No cached attributes
(5) # Executing section authorize from file /etc/freeradius/sites-enabled/
default
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 110 length 144
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0xb5449406b12a8d00
(5) eap: Finished EAP session with state 0xb5449406b12a8d00
(5) eap: Previous EAP request found for state 0xb5449406b12a8d00, released
from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: Peer indicated complete TLS record size will be 134 bytes
(5) eap_peap: Got complete TLS record (134 bytes)
(5) eap_peap: [eaptls verify] = length included
(5) eap_peap: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange
(5) eap_peap: TLS_accept: unknown state
(5) eap_peap: TLS_accept: unknown state
(5) eap_peap: <<< recv TLS 1.0 ChangeCipherSpec [length 0001]
(5) eap_peap: <<< recv TLS 1.0 Handshake [length 0010], Finished
(5) eap_peap: TLS_accept: unknown state
(5) eap_peap: >>> send TLS 1.0 ChangeCipherSpec [length 0001]
(5) eap_peap: TLS_accept: unknown state
(5) eap_peap: >>> send TLS 1.0 Handshake [length 0010], Finished
(5) eap_peap: TLS_accept: unknown state
(5) eap_peap: TLS_accept: unknown state
(5) eap_peap: (other): SSL negotiation finished successfully
(5) eap_peap: SSL Connection Established
(5) eap_peap: [eaptls process] = handled
(5) eap: Sending EAP Request (code 1) ID 111 length 65
(5) eap: EAP session adding &reply:State = 0xb5449406b02b8d00
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) Post-Auth-Type sub-section not found.  Ignoring.
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5) Sent Access-Challenge Id 6 from 192.168.100.201:1812 to
192.168.100.113:34296 length 0
(5)   EAP-Message = 0x016f004119001403010001011603
01003094086787833117af433bc1c929281ae2f5f7cd6692f7cc59d0a0bf
65c818294d2b79cc16f11ac9f86e10a67a7fdb1a6b
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0xb5449406b02b8d001eb003264d869845
(5) Finished request
Waking up in 4.9 seconds.
(6) Received Access-Request Id 7 from 192.168.100.113:34296 to
192.168.100.201:1812 length 193
(6)   User-Name = "bchristopher848"
(6)   NAS-IP-Address = 10.0.150.19
(6)   NAS-Identifier = "802aa849d031"
(6)   NAS-Port = 0
(6)   Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
(6)   Calling-Station-Id = "00-22-FB-6E-1D-C8"
(6)   Framed-MTU = 1400
(6)   NAS-Port-Type = Wireless-802.11
(6)   Connect-Info = "CONNECT 0Mbps 802.11b"
(6)   EAP-Message = 0x026f00061900
(6)   State = 0xb5449406b02b8d001eb003264d869845
(6)   Message-Authenticator = 0x89f89025177c0801e5cd47b689bb35ec
(6) session-state: No cached attributes
(6) # Executing section authorize from file /etc/freeradius/sites-enabled/
default
(6)   authorize {
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = notfound
(6)     } # policy filter_username = notfound
(6)     [preprocess] = ok
(6)     [chap] = noop
(6)     [mschap] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)     [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 111 length 6
(6) eap: Continuing tunnel setup
(6)     [eap] = ok
(6)   } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/sites-enabled/default
(6)   authenticate {
(6) eap: Expiring EAP session with state 0xb5449406b02b8d00
(6) eap: Finished EAP session with state 0xb5449406b02b8d00
(6) eap: Previous EAP request found for state 0xb5449406b02b8d00, released
from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: Continuing EAP-TLS
(6) eap_peap: Peer ACKed our handshake fragment.  handshake is finished
(6) eap_peap: [eaptls verify] = success
(6) eap_peap: [eaptls process] = success
(6) eap_peap: Session established.  Decoding tunneled attributes
(6) eap_peap: PEAP state TUNNEL ESTABLISHED
(6) eap: Sending EAP Request (code 1) ID 112 length 43
(6) eap: EAP session adding &reply:State = 0xb5449406b3348d00
(6)     [eap] = handled
(6)   } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) Post-Auth-Type sub-section not found.  Ignoring.
(6) # Executing group from file /etc/freeradius/sites-enabled/default
(6) Sent Access-Challenge Id 7 from 192.168.100.201:1812 to
192.168.100.113:34296 length 0
(6)   EAP-Message = 0x0170002b1900170301002091eabc
824030fa0d118d08413389ff5a78d63a9561aa4704edb36913865e9641
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0xb5449406b3348d001eb003264d869845
(6) Finished request
Waking up in 2.6 seconds.
(7) Received Access-Request Id 8 from 192.168.100.113:34296 to
192.168.100.201:1812 length 246
(7)   User-Name = "bchristopher848"
(7)   NAS-IP-Address = 10.0.150.19
(7)   NAS-Identifier = "802aa849d031"
(7)   NAS-Port = 0
(7)   Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
(7)   Calling-Station-Id = "00-22-FB-6E-1D-C8"
(7)   Framed-MTU = 1400
(7)   NAS-Port-Type = Wireless-802.11
(7)   Connect-Info = "CONNECT 0Mbps 802.11b"
(7)   EAP-Message = 0x0270003b19001703010030c8fbf0
015e3e5a875a826ccd41cd45b083183d0fbf452e6e4ccdc2b10c2d758557
f2bf2ba865abb148620ece26115524
(7)   State = 0xb5449406b3348d001eb003264d869845
(7)   Message-Authenticator = 0x0ec21e66dd7cd4e0a4858c79afabd736
(7) session-state: No cached attributes
(7) # Executing section authorize from file /etc/freeradius/sites-enabled/
default
(7)   authorize {
(7)     policy filter_username {
(7)       if (&User-Name) {
(7)       if (&User-Name)  -> TRUE
(7)       if (&User-Name)  {
(7)         if (&User-Name =~ /@[^@]*@/ ) {
(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)         if (&User-Name =~ /\.\./ ) {
(7)         if (&User-Name =~ /\.\./ )  -> FALSE
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(7)         if (&User-Name =~ /\.$/)  {
(7)         if (&User-Name =~ /\.$/)   -> FALSE
(7)         if (&User-Name =~ /@\./)  {
(7)         if (&User-Name =~ /@\./)   -> FALSE
(7)       } # if (&User-Name)  = notfound
(7)     } # policy filter_username = notfound
(7)     [preprocess] = ok
(7)     [chap] = noop
(7)     [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)     [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 112 length 59
(7) eap: Continuing tunnel setup
(7)     [eap] = ok
(7)   } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/sites-enabled/default
(7)   authenticate {
(7) eap: Expiring EAP session with state 0xb5449406b3348d00
(7) eap: Finished EAP session with state 0xb5449406b3348d00
(7) eap: Previous EAP request found for state 0xb5449406b3348d00, released
from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: Continuing EAP-TLS
(7) eap_peap: [eaptls verify] = ok
(7) eap_peap: Done initial handshake
(7) eap_peap: [eaptls process] = ok
(7) eap_peap: Session established.  Decoding tunneled attributes
(7) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(7) eap_peap: Identity - bchristopher848
(7) eap_peap: Got inner identity 'bchristopher848'
(7) eap_peap: Setting default EAP type for tunneled EAP session
(7) eap_peap: Got tunneled request
(7) eap_peap:   EAP-Message = 0x0270001401626368726973746f70686572383438
(7) eap_peap: Setting User-Name to bchristopher848
(7) eap_peap: Sending tunneled request to inner-tunnel
(7) eap_peap:   EAP-Message = 0x0270001401626368726973746f70686572383438
(7) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_peap:   User-Name = "bchristopher848"
(7) Virtual server inner-tunnel received request
(7)   EAP-Message = 0x0270001401626368726973746f70686572383438
(7)   FreeRADIUS-Proxied-To = 127.0.0.1
(7)   User-Name = "bchristopher848"
(7) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(7) server inner-tunnel {
(7)   # Executing section authorize from file
/etc/freeradius/sites-enabled/inner-tunnel
(7)     authorize {
(7)       policy filter_username {
(7)         if (&User-Name) {
(7)         if (&User-Name)  -> TRUE
(7)         if (&User-Name)  {
(7)           if (&User-Name =~ /@[^@]*@/ ) {
(7)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)           if (&User-Name =~ /\.\./ ) {
(7)           if (&User-Name =~ /\.\./ )  -> FALSE
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(7)           if (&User-Name =~ /\.$/)  {
(7)           if (&User-Name =~ /\.$/)   -> FALSE
(7)           if (&User-Name =~ /@\./)  {
(7)           if (&User-Name =~ /@\./)   -> FALSE
(7)         } # if (&User-Name)  = notfound
(7)       } # policy filter_username = notfound
(7)       [chap] = noop
(7)       [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)       [suffix] = noop
(7)       update control {
(7)         &Proxy-To-Realm := LOCAL
(7)       } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 112 length 20
(7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(7)       [eap] = ok
(7)     } # authorize = ok
(7)   Found Auth-Type = eap
(7)   # Executing group from file /etc/freeradius/sites-enabled/
inner-tunnel
(7)     authenticate {
(7) eap: Peer sent packet with method EAP Identity (1)
(7) eap: Calling submodule eap_mschapv2 to process data
(7) eap_mschapv2: Issuing Challenge
(7) eap: Sending EAP Request (code 1) ID 113 length 43
(7) eap: EAP session adding &reply:State = 0x38f91b6e38880129
(7)       [eap] = handled
(7)     } # authenticate = handled
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7)   EAP-Message = 0x0171002b1a01710026100f1b0f77
8f0e5ff10d130bcde3f0a1f0667265657261646975732d332e302e3135
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0x38f91b6e38880129b3a6b459c0f91610
(7) eap_peap: Got tunneled reply code 11
(7) eap_peap:   EAP-Message = 0x0171002b1a01710026100f1b0f77
8f0e5ff10d130bcde3f0a1f0667265657261646975732d332e302e3135
(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap:   State = 0x38f91b6e38880129b3a6b459c0f91610
(7) eap_peap: Got tunneled reply RADIUS code 11
(7) eap_peap:   EAP-Message = 0x0171002b1a01710026100f1b0f77
8f0e5ff10d130bcde3f0a1f0667265657261646975732d332e302e3135
(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap:   State = 0x38f91b6e38880129b3a6b459c0f91610
(7) eap_peap: Got tunneled Access-Challenge
(7) eap: Sending EAP Request (code 1) ID 113 length 75
(7) eap: EAP session adding &reply:State = 0xb5449406b2358d00
(7)     [eap] = handled
(7)   } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) Post-Auth-Type sub-section not found.  Ignoring.
(7) # Executing group from file /etc/freeradius/sites-enabled/default
(7) Sent Access-Challenge Id 8 from 192.168.100.201:1812 to
192.168.100.113:34296 length 0
(7)   EAP-Message = 0x0171004b190017030100403a39fb
1bbb95a5bdae36dec7bbaf48cd6d67436cc6fa144c66482d9a55dee6efc1
22c2ae145e37423201a0becee44924132e0e197859e4e437513ae27427e3a6
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0xb5449406b2358d001eb003264d869845
(7) Finished request
Waking up in 2.6 seconds.
(8) Received Access-Request Id 9 from 192.168.100.113:34296 to
192.168.100.201:1812 length 294
(8)   User-Name = "bchristopher848"
(8)   NAS-IP-Address = 10.0.150.19
(8)   NAS-Identifier = "802aa849d031"
(8)   NAS-Port = 0
(8)   Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
(8)   Calling-Station-Id = "00-22-FB-6E-1D-C8"
(8)   Framed-MTU = 1400
(8)   NAS-Port-Type = Wireless-802.11
(8)   Connect-Info = "CONNECT 0Mbps 802.11b"
(8)   EAP-Message = 0x0271006b19001703010060dc68da
606888205a8249468c13811c37cc426f2ad4ed4ed80b369f946ab0e0029d
069f9b903b244d4822ebf72b429433c990dcfef3af28b8871c7653e7c286
d1c4ad435ad1812458eaec44dc637bf173969928be0946944de2762170de365dc0
(8)   State = 0xb5449406b2358d001eb003264d869845
(8)   Message-Authenticator = 0xf489ba028df4298dc612460d97cc98ee
(8) session-state: No cached attributes
(8) # Executing section authorize from file /etc/freeradius/sites-enabled/
default
(8)   authorize {
(8)     policy filter_username {
(8)       if (&User-Name) {
(8)       if (&User-Name)  -> TRUE
(8)       if (&User-Name)  {
(8)         if (&User-Name =~ /@[^@]*@/ ) {
(8)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)         if (&User-Name =~ /\.\./ ) {
(8)         if (&User-Name =~ /\.\./ )  -> FALSE
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(8)         if (&User-Name =~ /\.$/)  {
(8)         if (&User-Name =~ /\.$/)   -> FALSE
(8)         if (&User-Name =~ /@\./)  {
(8)         if (&User-Name =~ /@\./)   -> FALSE
(8)       } # if (&User-Name)  = notfound
(8)     } # policy filter_username = notfound
(8)     [preprocess] = ok
(8)     [chap] = noop
(8)     [mschap] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
(8) suffix: No such realm "NULL"
(8)     [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 113 length 107
(8) eap: Continuing tunnel setup
(8)     [eap] = ok
(8)   } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/freeradius/sites-enabled/default
(8)   authenticate {
(8) eap: Expiring EAP session with state 0x38f91b6e38880129
(8) eap: Finished EAP session with state 0xb5449406b2358d00
(8) eap: Previous EAP request found for state 0xb5449406b2358d00, released
from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: Continuing EAP-TLS
(8) eap_peap: [eaptls verify] = ok
(8) eap_peap: Done initial handshake
(8) eap_peap: [eaptls process] = ok
(8) eap_peap: Session established.  Decoding tunneled attributes
(8) eap_peap: PEAP state phase2
(8) eap_peap: EAP method MSCHAPv2 (26)
(8) eap_peap: Got tunneled request
(8) eap_peap:   EAP-Message = 0x0271004a1a027100453136aadef2
a35125429a547478d2433260000000000000000026bd920d94eca847c70d
9775f4afe71538b455e9932097c600626368726973746f70686572383438
(8) eap_peap: Setting User-Name to bchristopher848
(8) eap_peap: Sending tunneled request to inner-tunnel
(8) eap_peap:   EAP-Message = 0x0271004a1a027100453136aadef2
a35125429a547478d2433260000000000000000026bd920d94eca847c70d
9775f4afe71538b455e9932097c600626368726973746f70686572383438
(8) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(8) eap_peap:   User-Name = "bchristopher848"
(8) eap_peap:   State = 0x38f91b6e38880129b3a6b459c0f91610
(8) Virtual server inner-tunnel received request
(8)   EAP-Message = 0x0271004a1a027100453136aadef2
a35125429a547478d2433260000000000000000026bd920d94eca847c70d
9775f4afe71538b455e9932097c600626368726973746f70686572383438
(8)   FreeRADIUS-Proxied-To = 127.0.0.1
(8)   User-Name = "bchristopher848"
(8)   State = 0x38f91b6e38880129b3a6b459c0f91610
(8) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(8) server inner-tunnel {
(8)   session-state: No cached attributes
(8)   # Executing section authorize from file
/etc/freeradius/sites-enabled/inner-tunnel
(8)     authorize {
(8)       policy filter_username {
(8)         if (&User-Name) {
(8)         if (&User-Name)  -> TRUE
(8)         if (&User-Name)  {
(8)           if (&User-Name =~ /@[^@]*@/ ) {
(8)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)           if (&User-Name =~ /\.\./ ) {
(8)           if (&User-Name =~ /\.\./ )  -> FALSE
(8)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(8)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(8)           if (&User-Name =~ /\.$/)  {
(8)           if (&User-Name =~ /\.$/)   -> FALSE
(8)           if (&User-Name =~ /@\./)  {
(8)           if (&User-Name =~ /@\./)   -> FALSE
(8)         } # if (&User-Name)  = notfound
(8)       } # policy filter_username = notfound
(8)       [chap] = noop
(8)       [mschap] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
(8) suffix: No such realm "NULL"
(8)       [suffix] = noop
(8)       update control {
(8)         &Proxy-To-Realm := LOCAL
(8)       } # update control = noop
(8) eap: Peer sent EAP Response (code 2) ID 113 length 74
(8) eap: No EAP Start, assuming it's an on-going EAP conversation
(8)       [eap] = updated
(8)       [files] = noop
rlm_ldap (ldap): Reserved connection (1)
(8) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
(8) ldap:    --> (cn=bchristopher848)
(8) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with
filter "(cn=bchristopher848)", scope "sub"
(8) ldap: Waiting for search result...
(8) ldap: User object found at DN "cn=bchristopher848,cn=
Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
(8) ldap: Processing user attributes
(8) ldap: control:Password-With-Header += '{ssha}o1fjrtGMqroWxrIgC8G/
jwK8GK5BxvANe+pK7w=='
rlm_ldap (ldap): Released connection (1)
Need 4 more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots
used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(8)       [ldap] = updated
rlm_ldap (adldap): Reserved connection (1)
(8) adldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
(8) adldap:    --> (cn=bchristopher848)
(8) adldap: Performing search in "ou=School,dc=seminary,dc=ad" with filter
"(cn=bchristopher848)", scope "sub"
(8) adldap: Waiting for search result...
(8) adldap: The specified DN wasn't found
(8) adldap: Search returned no results
rlm_ldap (adldap): Released connection (1)
Need 4 more connections to reach 10 spares
rlm_ldap (adldap): Opening additional connection (6), 1 of 26 pending
slots used
rlm_ldap (adldap): Connecting to ldap://localhost:389
rlm_ldap (adldap): Waiting for bind result...
rlm_ldap (adldap): Bind successful
(8)       [adldap] = notfound
(8)       [expiration] = noop
(8)       [logintime] = noop
(8) pap: Converted: &control:Password-With-Header ->
&control:SSHA1-Password
(8) pap: Removing &control:Password-With-Header
(8) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28
bytes
(8) pap: WARNING: Auth-Type already set.  Not setting to PAP
(8)       [pap] = noop
(8)     } # authorize = updated
(8)   Found Auth-Type = eap
(8)   # Executing group from file /etc/freeradius/sites-enabled/
inner-tunnel
(8)     authenticate {
(8) eap: Expiring EAP session with state 0x38f91b6e38880129
(8) eap: Finished EAP session with state 0x38f91b6e38880129
(8) eap: Previous EAP request found for state 0x38f91b6e38880129, released
from the list
(8) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(8) eap: Calling submodule eap_mschapv2 to process data
(8) eap_mschapv2: # Executing group from file
/etc/freeradius/sites-enabled/inner-tunnel
(8) eap_mschapv2:   Auth-Type MS-CHAP {
(8) mschap: WARNING: No Cleartext-Password configured.  Cannot create
NT-Password
(8) mschap: WARNING: No Cleartext-Password configured.  Cannot create
LM-Password
(8) mschap: Creating challenge hash with username: bchristopher848
(8) mschap: Client is using MS-CHAPv2
(8) mschap: ERROR: FAILED: No NT/LM-Password.  Cannot perform
authentication
(8) mschap: ERROR: MS-CHAP2-Response is incorrect
(8)     [mschap] = reject
(8)   } # Auth-Type MS-CHAP = reject
(8) eap: Sending EAP Failure (code 4) ID 113 length 4
(8) eap: Freeing handler
(8)       [eap] = reject
(8)     } # authenticate = reject
(8)   Failed to authenticate the user
(8)   Using Post-Auth-Type Reject
(8)   # Executing group from file /etc/freeradius/sites-enabled/
inner-tunnel
(8)     Post-Auth-Type REJECT {
(8) attr_filter.access_reject: EXPAND %{User-Name}
(8) attr_filter.access_reject:    --> bchristopher848
(8) attr_filter.access_reject: Matched entry DEFAULT at line 11
(8)       [attr_filter.access_reject] = updated
(8)       update outer.session-state {
(8)         &Module-Failure-Message := &request:Module-Failure-Message ->
'mschap: FAILED: No NT/LM-Password.  Cannot perform authentication'
(8)       } # update outer.session-state = noop
(8)     } # Post-Auth-Type REJECT = updated
(8) } # server inner-tunnel
(8) Virtual server sending reply
(8)   MS-CHAP-Error = "qE=691 R=1 C=523d66a28c934a7937a449415ae8f8ad V=3
M=Authentication failed"
(8)   EAP-Message = 0x04710004
(8)   Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap: Got tunneled reply code 3
(8) eap_peap:   MS-CHAP-Error = "qE=691 R=1 C=
523d66a28c934a7937a449415ae8f8ad V=3 M=Authentication failed"
(8) eap_peap:   EAP-Message = 0x04710004
(8) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap: Got tunneled reply RADIUS code 3
(8) eap_peap:   MS-CHAP-Error = "qE=691 R=1 C=
523d66a28c934a7937a449415ae8f8ad V=3 M=Authentication failed"
(8) eap_peap:   EAP-Message = 0x04710004
(8) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap: Tunneled authentication was rejected
(8) eap_peap: FAILURE
(8) eap: Sending EAP Request (code 1) ID 114 length 43
(8) eap: EAP session adding &reply:State = 0xb5449406bd368d00
(8)     [eap] = handled
(8)   } # authenticate = handled
(8) Using Post-Auth-Type Challenge
(8) Post-Auth-Type sub-section not found.  Ignoring.
(8) # Executing group from file /etc/freeradius/sites-enabled/default
(8) session-state: Saving cached attributes
(8)   Module-Failure-Message := "mschap: FAILED: No NT/LM-Password.
Cannot perform authentication"
(8) Sent Access-Challenge Id 9 from 192.168.100.201:1812 to
192.168.100.113:34296 length 0
(8)   EAP-Message = 0x0172002b190017030100207447ef
7e889f505a2467ece5e23e6132aabd5ae2a2b62f44232ce0581e567dc8
(8)   Message-Authenticator = 0x00000000000000000000000000000000
(8)   State = 0xb5449406bd368d001eb003264d869845
(8) Finished request
Waking up in 2.6 seconds.
(9) Received Access-Request Id 10 from 192.168.100.113:34296 to
192.168.100.201:1812 length 230
(9)   User-Name = "bchristopher848"
(9)   NAS-IP-Address = 10.0.150.19
(9)   NAS-Identifier = "802aa849d031"
(9)   NAS-Port = 0
(9)   Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi"
(9)   Calling-Station-Id = "00-22-FB-6E-1D-C8"
(9)   Framed-MTU = 1400
(9)   NAS-Port-Type = Wireless-802.11
(9)   Connect-Info = "CONNECT 0Mbps 802.11b"
(9)   EAP-Message = 0x0272002b19001703010020c6855d
5f0630c6486963b3a872b1ce4479a9d9748bb1a8d28a488183707339de
(9)   State = 0xb5449406bd368d001eb003264d869845
(9)   Message-Authenticator = 0xe32f0f6506920ee010991cab23cdc592
(9) Restoring &session-state
(9)   &session-state:Module-Failure-Message := "mschap: FAILED: No
NT/LM-Password.  Cannot perform authentication"
(9) # Executing section authorize from file /etc/freeradius/sites-enabled/
default
(9)   authorize {
(9)     policy filter_username {
(9)       if (&User-Name) {
(9)       if (&User-Name)  -> TRUE
(9)       if (&User-Name)  {
(9)         if (&User-Name =~ /@[^@]*@/ ) {
(9)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(9)         if (&User-Name =~ /\.\./ ) {
(9)         if (&User-Name =~ /\.\./ )  -> FALSE
(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(9)         if (&User-Name =~ /\.$/)  {
(9)         if (&User-Name =~ /\.$/)   -> FALSE
(9)         if (&User-Name =~ /@\./)  {
(9)         if (&User-Name =~ /@\./)   -> FALSE
(9)       } # if (&User-Name)  = notfound
(9)     } # policy filter_username = notfound
(9)     [preprocess] = ok
(9)     [chap] = noop
(9)     [mschap] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL
(9) suffix: No such realm "NULL"
(9)     [suffix] = noop
(9) eap: Peer sent EAP Response (code 2) ID 114 length 43
(9) eap: Continuing tunnel setup
(9)     [eap] = ok
(9)   } # authorize = ok
(9) Found Auth-Type = eap
(9) # Executing group from file /etc/freeradius/sites-enabled/default
(9)   authenticate {
(9) eap: Expiring EAP session with state 0xb5449406bd368d00
(9) eap: Finished EAP session with state 0xb5449406bd368d00
(9) eap: Previous EAP request found for state 0xb5449406bd368d00, released
from the list
(9) eap: Peer sent packet with method EAP PEAP (25)
(9) eap: Calling submodule eap_peap to process data
(9) eap_peap: Continuing EAP-TLS
(9) eap_peap: [eaptls verify] = ok
(9) eap_peap: Done initial handshake
(9) eap_peap: [eaptls process] = ok
(9) eap_peap: Session established.  Decoding tunneled attributes
(9) eap_peap: PEAP state send tlv failure
(9) eap_peap: Received EAP-TLV response
(9) eap_peap:   ERROR: The users session was previously rejected:
returning reject (again.)
(9) eap_peap:   This means you need to read the PREVIOUS messages in the
debug output
(9) eap_peap:   to find out the reason why the user was rejected
(9) eap_peap:   Look for "reject" or "fail".  Those earlier messages will
tell you
(9) eap_peap:   what went wrong, and how to fix the problem
(9) eap: ERROR: Failed continuing EAP PEAP (25) session.  EAP sub-module
failed
(9) eap: Sending EAP Failure (code 4) ID 114 length 4
(9) eap: Failed in EAP select
(9)     [eap] = invalid
(9)   } # authenticate = invalid
(9) Failed to authenticate the user
(9) Using Post-Auth-Type Reject
(9) # Executing group from file /etc/freeradius/sites-enabled/default
(9)   Post-Auth-Type REJECT {
(9) attr_filter.access_reject: EXPAND %{User-Name}
(9) attr_filter.access_reject:    --> bchristopher848
(9) attr_filter.access_reject: Matched entry DEFAULT at line 11
(9)     [attr_filter.access_reject] = updated
(9)     [eap] = noop
(9)     policy remove_reply_message_if_eap {
(9)       if (&reply:EAP-Message && &reply:Reply-Message) {
(9)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(9)       else {
(9)         [noop] = noop
(9)       } # else = noop
(9)     } # policy remove_reply_message_if_eap = noop
(9)   } # Post-Auth-Type REJECT = updated
(9) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(9) Sending delayed response
(9) Sent Access-Reject Id 10 from 192.168.100.201:1812 to
192.168.100.113:34296 length 44
(9)   EAP-Message = 0x04720004
(9)   Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 1.6 seconds.
(0) Cleaning up request packet ID 1 with timestamp +30
(1) Cleaning up request packet ID 2 with timestamp +30
(2) Cleaning up request packet ID 3 with timestamp +30
(3) Cleaning up request packet ID 4 with timestamp +30
(4) Cleaning up request packet ID 5 with timestamp +30
(5) Cleaning up request packet ID 6 with timestamp +30
Waking up in 2.2 seconds.
(6) Cleaning up request packet ID 7 with timestamp +32
(7) Cleaning up request packet ID 8 with timestamp +32
(8) Cleaning up request packet ID 9 with timestamp +32
(9) Cleaning up request packet ID 10 with timestamp +32
Ready to process requests
(10) Received Accounting-Request Id 1 from 192.168.100.115:52712 to
192.168.100.201:1813 length 90
(10)   Acct-Status-Type = Accounting-Off
(10)   Acct-Authentic = RADIUS
(10)   NAS-IP-Address = 10.0.148.205
(10)   NAS-Identifier = "802aa849cbcc"
(10)   Called-Station-Id = "80-2A-A8-4A-CB-CC:SeminaryWiFi"
(10)   Acct-Terminate-Cause = NAS-Reboot
(10) # Executing section preacct from file /etc/freeradius/sites-enabled/
default
(10)   preacct {
(10)     [preprocess] = ok
(10)     policy acct_unique {
(10)       update request {
(10)         &Tmp-String-9 := "ai:"
(10)       } # update request = noop
(10)       if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
 ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) {
(10)       EXPAND %{hex:&Class}
(10)          -->
(10)       EXPAND ^%{hex:&Tmp-String-9}
(10)          --> ^61693a
(10)       if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
 ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i))  -> FALSE
(10)       else {
(10)         update request {
(10)           EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-
Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
(10)              --> 3fbd256e7d3667dda249cdebb204aa6c
(10)           &Acct-Unique-Session-Id := 3fbd256e7d3667dda249cdebb204aa6c
(10)         } # update request = noop
(10)       } # else = noop
(10)     } # policy acct_unique = noop
(10)     [suffix] = noop
(10)     [files] = noop
(10)   } # preacct = ok
(10) # Executing section accounting from file
/etc/freeradius/sites-enabled/default
(10)   accounting {
(10) detail: EXPAND /var/log/freeradius/radacct/%{
%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d
(10) detail:    --> /var/log/freeradius/radacct/19
2.168.100.115/detail-20170905
(10) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{
Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to
/var/log/freeradius/radacct/192.168.100.115/detail-20170905
(10) detail: EXPAND %t
(10) detail:    --> Tue Sep  5 22:05:39 2017
(10)     [detail] = ok
(10)     [unix] = noop
(10)     [exec] = noop
(10) attr_filter.accounting_response: EXPAND %{User-Name}
(10) attr_filter.accounting_response:    -->
(10)     [attr_filter.accounting_response] = noop
(10)   } # accounting = ok
(10) Sent Accounting-Response Id 1 from 192.168.100.201:1813 to
192.168.100.115:52712 length 0
(10) Finished request
(10) Cleaning up request packet ID 1 with timestamp +44
Ready to process requests
(11) Received Accounting-Request Id 1 from 192.168.100.115:41826 to
192.168.100.201:1813 length 90
(11)   Acct-Status-Type = Accounting-Off
(11)   Acct-Authentic = RADIUS
(11)   NAS-IP-Address = 10.0.148.205
(11)   NAS-Identifier = "802aa849cbcc"
(11)   Called-Station-Id = "82-2A-A8-4B-CB-CC:SeminaryWiFi"
(11)   Acct-Terminate-Cause = NAS-Reboot
(11) # Executing section preacct from file /etc/freeradius/sites-enabled/
default
(11)   preacct {
(11)     [preprocess] = ok
(11)     policy acct_unique {
(11)       update request {
(11)         &Tmp-String-9 := "ai:"
(11)       } # update request = noop
(11)       if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
 ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) {
(11)       EXPAND %{hex:&Class}
(11)          -->
(11)       EXPAND ^%{hex:&Tmp-String-9}
(11)          --> ^61693a
(11)       if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
 ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i))  -> FALSE
(11)       else {
(11)         update request {
(11)           EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-
Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
(11)              --> 3fbd256e7d3667dda249cdebb204aa6c
(11)           &Acct-Unique-Session-Id := 3fbd256e7d3667dda249cdebb204aa6c
(11)         } # update request = noop
(11)       } # else = noop
(11)     } # policy acct_unique = noop
(11)     [suffix] = noop
(11)     [files] = noop
(11)   } # preacct = ok
(11) # Executing section accounting from file
/etc/freeradius/sites-enabled/default
(11)   accounting {
(11) detail: EXPAND /var/log/freeradius/radacct/%{
%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d
(11) detail:    --> /var/log/freeradius/radacct/19
2.168.100.115/detail-20170905
(11) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{
Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to
/var/log/freeradius/radacct/192.168.100.115/detail-20170905
(11) detail: EXPAND %t
(11) detail:    --> Tue Sep  5 22:05:40 2017
(11)     [detail] = ok
(11)     [unix] = noop
(11)     [exec] = noop
(11) attr_filter.accounting_response: EXPAND %{User-Name}
(11) attr_filter.accounting_response:    -->
(11)     [attr_filter.accounting_response] = noop
(11)   } # accounting = ok
(11) Sent Accounting-Response Id 1 from 192.168.100.201:1813 to
192.168.100.115:41826 length 0
(11) Finished request
(11) Cleaning up request packet ID 1 with timestamp +45
Ready to process requests
Matthew Pulis
mobile / WhatsApp:   +356 79539404 <+356%207953%209404>