In the "Start"-Packets and "Interim-Update"-Packets it seems to be right.
But ALL the "Stop"-Packets have 0 as NAS-Port.
So, you agree that this is a bug of the Access-Point?
Thank you for your reply.
Wolfgang Burger
Hello, I've got three WG102 Access Points from Netgear. I'm using the latest firmware Version 4.0.27 because it should "Fixed the issue that 802.1x Authentication does not work with machine authentication" But I can confirm that the accounting it still NOT working everytime. Looking into my logfiles I can see that the cases which worked fine everytime the same port is used. Here are two examples, the first one worked fine, the Session-Id is always the same: Wed Aug 13 20:05:14 2008 Service-Type = Framed-User Acct-Status-Type = Start User-Name = "test1" Framed-MTU = 1488 Acct-Session-Id = " 1" Acct-Authentic = RADIUS Acct-Delay-Time = 0 Called-Station-Id = "00184DC8XXXX:Network" Calling-Station-Id = "001A73XXXXXX" NAS-Identifier = "APBuero" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" NAS-IP-Address = 192.168.XX.XX NAS-Port = 1 NAS-Port-Id = "STA port # 1" Acct-Unique-Session-Id = "866e0c5655a05a0b" Timestamp = 1218650714 Request-Authenticator = Verified Wed Aug 13 20:10:13 2008 Service-Type = Framed-User Acct-Status-Type = Interim-Update User-Name = "test1" Framed-MTU = 1488 Acct-Session-Id = " 1" Acct-Authentic = RADIUS Acct-Session-Time = 299 Acct-Delay-Time = 0 Called-Station-Id = "00184DC8XXXX:Network" Calling-Station-Id = "001A73XXXXXX" NAS-Identifier = "APBuero" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" NAS-IP-Address = 192.168.XX.XX NAS-Port = 1 NAS-Port-Id = "STA port # 1" Acct-Unique-Session-Id = "866e0c5655a05a0b" Timestamp = 1218651013 Request-Authenticator = Verified Wed Aug 13 20:34:33 2008 Service-Type = Framed-User Acct-Status-Type = Stop User-Name = "test1" Framed-MTU = 1488 Acct-Session-Id = " 1" Acct-Authentic = RADIUS Acct-Session-Time = 1758 Acct-Terminate-Cause = User-Request Acct-Delay-Time = 0 Called-Station-Id = "00184DC8XXXX:Network" Calling-Station-Id = "001A73XXXXXX" NAS-Identifier = "APBuero" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" NAS-IP-Address = 192.168.XX.XX NAS-Port = 1 NAS-Port-Id = "STA port # 1" Acct-Unique-Session-Id = "866e0c5655a05a0b" Timestamp = 1218652473 Request-Authenticator = Verified ------------------------------------------------------------------------------------ But this second one from today fails with the error: Tue Aug 19 18:11:30 2008 : Auth: Login OK: [test2 /<via Auth-Type = EAP>] (from client AP-Halle1 port 1 cli 001302BEXXXX) Tue Aug 19 18:12:30 2008 : Error: rlm_radutmp: Logout for NAS AP-Halle1 port 0, but no Login record When looking into detail log I can also see, that the Session-Id and the port changed and I don't know why Tue Aug 19 18:11:30 2008 Service-Type = Framed-User Acct-Status-Type = Start User-Name = "test2" Framed-MTU = 1488 Acct-Session-Id = " 6" Acct-Authentic = RADIUS Acct-Delay-Time = 0 Called-Station-Id = "000000000000:Network" Calling-Station-Id = "001302BEXXXX" NAS-Identifier = "AP-Halle1" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" NAS-IP-Address = 192.168.xx.xx NAS-Port = 1 NAS-Port-Id = "STA port # 1" Acct-Unique-Session-Id = "11f6ee9422434136" Timestamp = 1219162290 Request-Authenticator = Verified Tue Aug 19 18:12:30 2008 Service-Type = Framed-User Acct-Status-Type = Stop User-Name = "test2" Framed-MTU = 1488 Acct-Session-Id = " 6" Acct-Authentic = RADIUS Acct-Session-Time = 60 Acct-Terminate-Cause = User-Request Acct-Delay-Time = 0 Called-Station-Id = "000000000000:Network" Calling-Station-Id = "001302BEXXXX" NAS-Identifier = "AP-Halle1" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" NAS-IP-Address = 192.168.xx.xx NAS-Port = 0 NAS-Port-Id = "STA port # 0" Acct-Unique-Session-Id = "9c44efbf7672967b" Timestamp = 1219162350 Request-Authenticator = Verified --------------------------------------------------------------------------- Obviously the netgear access point uses port 1 on start but port 0 on stop. Also the user is definitely NOT connected anymore but radwho shows the following: # radwho -R User-Name = "test2" Acct-Session-Id = " 6" NAS-IP-Address = 192.168.XX.XX NAS-Port = 1 Service-type = Login-User Framed-IP-Address = Acct-Session-Time = 10255 Calling-Station-Id = "001302BEXXXX" User-Name = "test2" Acct-Session-Id = " 16" NAS-IP-Address = 192.168.XX.XX NAS-Port = 1 Service-type = Login-User Framed-IP-Address = Acct-Session-Time = 8170 Calling-Station-Id = "001302BEXXXX" # It's shows that the user is still connected... Does anyone know how this is possible? Best regards Stefan Puch