How are you dealing with the challenge response. If you use eap ttls with pap them this is not an issue alan ----- Reply message ----- From: "Josh Richard" <jrichar4@d.umn.edu> Date: Fri, Feb 25, 2011 17:59 Subject: Auth-Type Perl instead of Auth-Type EAP? To: "freeradius-users@lists.freeradius.org" <freeradius-users@lists.freeradius.org> Hello list, After a bit of digging, I would like to ask a question to ensure this idea is even possible. :) I am running FR 2 on Debian. What I would like to do is have a WPA2 PEAP/MS_ChapV2 Cisco wireless SSID hook into the FR server above. The FR server currently is using rlm_perl to handle authentication and this does work with FR running with -x and a client test using radtest: Sending Access-Request of id 184 to <ip> port 1812 User-Name = "jrichar4" User-Password = "removed" NAS-IP-Address = 127.0.1.1 NAS-Port = 10 rad_recv: Access-Accept packet from host <ip> port 1812, id=184, length=20 on the server I see: rlm_perl: Added pair User-Name = jrichar4 rlm_perl: Added pair User-Password = <removed> rlm_perl: Added pair NAS-IP-Address = 127.0.1.1 rlm_perl: Added pair NAS-Port = 10 rlm_perl: Added pair Crypt-Password = <removed> rlm_perl: Added pair Auth-Type = Perl I wrote some Perl in the rlm_perl code that uses Perl's Authen::Radius to proxy the lookup to a different production FR server containing the set of all users. Neat. I hope to use this server to flip VLANs using $RAD_REPLY{'Tunnel-Private-Group-ID'} based on an eventual db lookup to control wireless machine infections without mutzing with an existing server. When the SSID is wired in, we see this: [peap] Got inner identity 'jrichar4' # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel rlm_perl: Added pair User-Name = jrichar4 rlm_perl: Added pair EAP-Message = 0x0206000c016d736865746b61 rlm_perl: Added pair EAP-Type = Identity rlm_perl: Added pair FreeRADIUS-Proxied-To = 127.0.0.1 rlm_perl: Added pair Crypt-Password = * rlm_perl: Added pair Auth-Type = EAP rlm_perl: Added pair Proxy-To-Realm = LOCAL rlm_perl: Added pair EAP-Type = MS-CHAP-V2 I would prefer the use Auth-Type = Perl in the EAP inner tunnel. Is this possible? I am hoping something simple is amiss as this is close to working! I have only: DEFAULT Auth-Type = Perl in users. In inner tunnel I have: authenticate { .... Auth-Type Perl { perl } ... eap } Do I need to overload anything in eap.conf? Thank you all and kind regards, Josh Richard University of Minnesota Duluth USA - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html