Hi everyone. Im trying to get RLM_perl to respond with two Cisco-AVPair lines (what would usually be done with += in users) Unfortunately only the first seems to get sent back to the nas - debug output follows rlm_perl: Added pair Cisco-AVPair = ip:dns-servers=10.10.10.10 10.10.10.12 rlm_perl: Added pair Cisco-AVPair = ip:route=10.10.0.0 255.255.255.0 rlm_perl: Added pair Framed-IP-Address = 10.10.10.12 rlm_perl: Added pair Framed-IP-Netmask = 255.255.255.255 rlm_perl: Added pair Auth-Type = perl rlm_perl: Added pair Service-Type = Framed-User rlm_perl: Added pair Auth-Type = System modcall[authenticate]: module "perl" returns ok for request 25 modcall: group Auth-Type returns ok for request 25 Sending Access-Accept of id 56 to 127.0.0.1:34529 Cisco-AVPair = "ip:dns-servers=10.10.10.10 10.10.10.12" Framed-IP-Address = 10.10.10.10 Framed-IP-Netmask = 255.255.255.255 Service-Type = Framed-User As you can see, rlm_perl logs that it is adding the pair twice but only the first is returned. I've gone so far as to looking at the code for rlm_perl and it looks to me like it should have worked from what i have done, the coder has asked for a reference to an array. my code basically does this push(@avpairs,'ip:dns-servers=$dns1 $dns2'); push(@avpairs,"ip:route=$$thisroute{network} $$thisroute{subnet}"); $RAD_REPLY{'Cisco-AVPair'}=\@avpairs; Anyone any ideas? Doesn't look like many people use rlm_perl yet