Hi, I have a problem to change vlan on a Catalyst 2950 switch using the 802.1x protocol. The problem is that no changes to the vlan you specified. The authentication and validation of the user is correct, but does not change vlan. Freeradius User Configuration: steve Cleartext-Password := "testing" Service-Type = Framed-User, Tunnel-Type = VLAN, Tunnel-Medium-Type = IEEE-802, Tunnel-Private-Group-ID = 2 Switch 2950 configuration: aaa new-model aaa authentication login default local aaa authentication dot1x default group radius enable secret 5 $1$Hpyf$/AA8F3lVYES7KUq0abTqy. interface FastEthernet0/3 switchport mode access no ip address dot1x port-control auto interface Vlan1 ip address 192.168.250.250 255.255.255.0 no ip route-cache ip http server ip radius source-interface FastEthernet0/2 radius-server host 192.168.250.200 auth-port 1812 acct-port 1813 key password radius-server retransmit 3 no radius-server attribute nas-port privilege exec level 0 line show Right now, this created the vlan 1 and vlan 2 Thanks.Guillermo _________________________________________________________________ ¡Citas! ¡Ligues! ¿Salimos? ¿Cómo es tu pareja ideal? Búscala en el sitio nº1… ¡Regístrate ya! http://contactos.es.msn.com/?mtcmk=015352