Hello everyone. I am trying to use AAA for remote VPN access on a Pix 515E firewall. The following shows a debug of what I am seeing on the Radius Server during the Auth process. Not sure as to why the Radius server is sending an access-reject after it verifies that my user is valid and should be authenticated for remote access. Any pointers would be greatly appreciated. Thank you. James Taylor rad_recv: Access-Request packet from host 192.168.42.1:1025, id=62, length=94 User-Name = "jtaylor" NAS-IP-Address = 192.168.42.1 User-Password = "*********" NAS-Port = 49 Cisco-AVPair = "ip:source-ip=192.168.43.250" rlm_ldap: - authorize rlm_ldap: performing user authorization for jtaylor rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: (re)connect to intranet.corp.laszlosystems.com:389, authentication 0 rlm_ldap: bind as cn=Manager,dc=laszlosystems,dc=com/Laszl0 to intranet.corp.laszlosystems.com:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: Added password ********** in check items rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user jtaylor authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 rad_recv: Access-Request packet from host 192.168.42.1:1025, id=63, length=94 Sending Access-Reject of id 62 to 192.168.42.1:1025