Hi, i've got a problem with simultaneous-use and a Cisco WLC4400. If i choose nastype=other in clients.conf the radaact table gets queried and if there is a running session for that user ( acctstoptime IS NULL) the user gets rejected ( defined for the users group in radgroupcheck simultaneous-use := 1 ). So far so good, but if i choose nastype=cisco, the user can log in as often as wanted. Checkrad gets executed and logs the following: /var/log/radius/checkrad.log ----------snip----------------------------------------------- Fri Jun 1 15:18:27 2012 checkrad cisco 141.72.65.21 1 machauer@staff.dhbw-mannheim.de 4fc8c577/a0:0b:ba:dd:25:8a/44 snmpget: /usr/bin/snmpget -r 1 -t 5 -v2c -c 'xxxxxxxxxx' 141.72.65.21 .iso.org.dod.internet.private.enterprises.9.2.9.2.1.18.1 user at port S1: No snpwalk: /usr/bin/snmpwalk -r 1 -t 5 -v2c -c 'xxxxxxxxxx' 141.72.65.21 .iso.org.dod.internet.private.enterprises.9.10.19.1.3.1.1.3 Returning 0 (login ok) ------------snap------------------------------------------------ If i execute the snmpget command by hand, i get the following: SNMPv2-SMI::enterprises.9.2.9.2.1.18.1 = No Such Object available on this agent at this OID The MIB on this device seems to be different than on other cisco devices :-( Has anyone an updated checkrad version which can get active usersessions from Cisco WLC or a hint how checkrad needs to be edited to do so ? Using nastype=other is no option, because the NAS only sends sessiontimeouts every 10 Minutes and i always have a time lag between radacct sessions and NAS sessions. Help would be really great ! Yours Patrick Machauer Rechenzentrum Duale Hochschule Baden-Württemberg Mannheim Baden-Wuerttemberg Cooperative State University Mannheim Rechenzentrum Coblitzallee 1-9 68163 Mannheim Tel.: +49 (0)621 4105 - 1278 Fax: +49 (0)621 4105 - 1278 E-Mail: machauer@dhbw-mannheim.de <mailto:machauer@dhbw-mannheim.de> Web: http://www.rz.dhbw-mannheim.de <http://www.rz.dhbw-mannheim.de>