Re: Accounting Packet not sent

On Tue, 2021-02-16 at 14:38 +0100, Michael Fischer wrote:

Hi!

My goal is to authenticate WiFi-Users via FreeRadius with an eDirectory backend. FreeRadius should then send an accounting packet to a FortiGate firewall where a SSO agent is running.

The authentication part is working find, a user can connect to the WiFi.

As far as I understood it, I should configure FreeRadius to write a detail file which is then parsed an an accounting package sent to the Fortigate firewall. I configured a realm in proxy.conf: realm Fortigate { accthost = 172.16.1.253 secret = *********** }

And I enabled the site "copy-accounting-to-home-server" with the following configuration:

server copy-acct-to-home-server { listen { type = detail filename = ${radacctdir}/detail-* load_factor = 10 }

preacct { preprocess suffix files update control { Proxy-To-Realm := 'Fortigate' } }

accounting { ok }

pre-proxy { }

post-proxy { } }

Reading the detail file seems to work fine, but no accounting package is sent to the FortiGate firewall (I even checked using Wireshark). See a part of the debug-log here: (9) Login OK: [fimi] (from client private-network-1 port 0 cli F4-60- E2-B3-96-5C) (9) Sent Access-Accept Id 107 from 172.16.1.104:1812 to 192.168.251.51:39578 length 0 (9) Class := 0x54657374 (9) MS-MPPE-Recv-Key = 0x28765691676b5035b99c8aa3b2b5bb8c1e9b4b3e32a457239e11df0cdac127ea (9) MS-MPPE-Send-Key = 0x1120b9224c29ff96b3ed507b19eabd80bb1c7728772cbe8305a876cede81c224 (9) EAP-Message = 0x03d10004 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) User-Name += "fimi" (9) Finished request Waking up in 4.8 seconds. detail (/var/log/radius/radacct/detail-*): Polling for detail file detail (/var/log/radius/radacct/detail-*): Renaming /var/log/radius/radacct/detail-192.168.251.51-20210216 -> /var/log/radius/radacct/detail.work detail (/var/log/radius/radacct/detail-*): Read packet from /var/log/radius/radacct/detail.work Packet-Type = Access-Accept Class = 0x54657374 User-Name = "fimi" MS-MPPE-Recv-Key = 0x28765691676b5035b99c8aa3b2b5bb8c1e9b4b3e32a457239e11df0cdac127ea MS-MPPE-Send-Key = 0x1120b9224c29ff96b3ed507b19eabd80bb1c7728772cbe8305a876cede81c224 EAP-MSK = 0x28765691676b5035b99c8aa3b2b5bb8c1e9b4b3e32a457239e11df0cdac127ea1120b 9224c29ff96b3ed507b19eabd80bb1c7728772cbe8305a876cede81c224 EAP-EMSK = 0xd3a64e1f290603568302a9f6c13c3ae00eaea0f45caeff1503b5609e2faf9b06be114 12f1243564b0a08b8df5d58cc33235989699b860f0171b9b73a29bb0e36 EAP-Session-Id = 0x19c2bce2a85918a3ba9ea0068fd39acacb8173753f6c2a19ac67249b606157c82923f 2dacd82dc178f0df970ea5031e0e57b82ad5100de437f43b4f8303af37cae EAP-Message = 0x03d10004 Message-Authenticator = 0x00000000000000000000000000000000 Packet-Original-Timestamp = "Feb 16 2021 14:22:24 CET" Packet-Transmit-Counter = 1 Waking up in 4.6 seconds.

See full debug-log attached.

I would really appreciate your help!

Thanks, Mike Hi again!

As I received my E-Mail from the List without attachment - here is the debug output: FreeRADIUS Version 3.0.21 Copyright (C) 1999-2019 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb//dictionary including configuration file /etc/raddb//radiusd.conf including configuration file /etc/raddb//proxy.conf including configuration file /etc/raddb//clients.conf including files in directory /etc/raddb//mods-enabled/ including configuration file /etc/raddb//mods-enabled/always including configuration file /etc/raddb//mods-enabled/attr_filter including configuration file /etc/raddb//mods-enabled/cache_eap including configuration file /etc/raddb//mods-enabled/chap including configuration file /etc/raddb//mods-enabled/date including configuration file /etc/raddb//mods-enabled/detail including configuration file /etc/raddb//mods-enabled/digest including configuration file /etc/raddb//mods-enabled/dynamic_clients including configuration file /etc/raddb//mods-enabled/eap including configuration file /etc/raddb//mods-enabled/echo including configuration file /etc/raddb//mods-enabled/exec including configuration file /etc/raddb//mods-enabled/expiration including configuration file /etc/raddb//mods-enabled/expr including configuration file /etc/raddb//mods-enabled/files including configuration file /etc/raddb//mods-enabled/linelog including configuration file /etc/raddb//mods-enabled/logintime including configuration file /etc/raddb//mods-enabled/mschap including configuration file /etc/raddb//mods-enabled/ntlm_auth including configuration file /etc/raddb//mods-enabled/pap including configuration file /etc/raddb//mods-enabled/passwd including configuration file /etc/raddb//mods-enabled/preprocess including configuration file /etc/raddb//mods-enabled/radutmp including configuration file /etc/raddb//mods-enabled/realm including configuration file /etc/raddb//mods-enabled/replicate including configuration file /etc/raddb//mods-enabled/soh including configuration file /etc/raddb//mods-enabled/sradutmp including configuration file /etc/raddb//mods-enabled/unix including configuration file /etc/raddb//mods-enabled/unpack including configuration file /etc/raddb//mods-enabled/utf8 including configuration file /etc/raddb//mods-enabled/ldap including files in directory /etc/raddb//policy.d/ including configuration file /etc/raddb//policy.d/abfab-tr including configuration file /etc/raddb//policy.d/accounting including configuration file /etc/raddb//policy.d/canonicalization including configuration file /etc/raddb//policy.d/control including configuration file /etc/raddb//policy.d/cui including configuration file /etc/raddb//policy.d/debug including configuration file /etc/raddb//policy.d/dhcp including configuration file /etc/raddb//policy.d/eap including configuration file /etc/raddb//policy.d/filter including configuration file /etc/raddb//policy.d/moonshot-targeted-ids including configuration file /etc/raddb//policy.d/operator-name including configuration file /etc/raddb//policy.d/rfc7542 including files in directory /etc/raddb//sites-enabled/ including configuration file /etc/raddb//sites-enabled/default including configuration file /etc/raddb//sites-enabled/inner-tunnel including configuration file /etc/raddb//sites-enabled/copy-acct-to- home-server main { security { allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } realm Fortigate { accthost = 172.16.1.253 secret = <<< secret >>> } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client private-network-1 { ipaddr = 192.168.251.0/24 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = LDAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb//mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb//mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb//mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb//mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb//mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb//mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb//mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb//mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb//mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb//mods- enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb//mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb//mods- enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb//mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb//mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb//mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb//mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb//mods- config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb//mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb//mods- config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb//mods- enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb//mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/raddb//mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /etc/raddb//mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb//mods-enabled/detail detail { filename = "/var/log/radius/radacct/detail-%{Packet-Src-IP- Address}-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb//mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb//mods- enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb//mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb//mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb//mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb//mods- enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb//mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb//mods-enabled/files files { filename = "/etc/raddb//mods-config/files/authorize" acctusersfile = "/etc/raddb//mods-config/files/accounting" preproxy_usersfile = "/etc/raddb//mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb//mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb//mods- enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:- unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb//mods- enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb//mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/raddb//mods- enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key -- domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User- Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb//mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb//mods- enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb//mods- enabled/preprocess preprocess { huntgroups = "/etc/raddb//mods-config/preprocess/huntgroups" hints = "/etc/raddb//mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb//mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb//mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb//mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/raddb//mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb//mods- enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb//mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb//mods- enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb//mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/raddb//mods- enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb//mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb//mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb//mods-enabled/utf8 # Loaded module rlm_ldap # Loading module "ldap" from file /etc/raddb//mods-enabled/ldap ldap { server = "ldaps://172.16.1.33" port = 636 identity = "cn=8021xproxy,ou=server,o=htbl" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" edir = yes edir_autz = yes user { scope = "sub" access_attribute = "dialupAccess" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "o=HTBL" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { ca_file = "/etc/raddb//certs/eDirCAcert.pem" start_tls = no require_cert = "allow" } } Creating attribute LDAP-Group instantiate { } # Instantiating module "reject" from file /etc/raddb//mods- enabled/always # Instantiating module "fail" from file /etc/raddb//mods- enabled/always # Instantiating module "ok" from file /etc/raddb//mods-enabled/always # Instantiating module "handled" from file /etc/raddb//mods- enabled/always # Instantiating module "invalid" from file /etc/raddb//mods- enabled/always # Instantiating module "userlock" from file /etc/raddb//mods- enabled/always # Instantiating module "notfound" from file /etc/raddb//mods- enabled/always # Instantiating module "noop" from file /etc/raddb//mods- enabled/always # Instantiating module "updated" from file /etc/raddb//mods- enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb//mods-enabled/attr_filter reading pairlist file /etc/raddb//mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb//mods-enabled/attr_filter reading pairlist file /etc/raddb//mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb//mods-enabled/attr_filter reading pairlist file /etc/raddb//mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb//mods-enabled/attr_filter reading pairlist file /etc/raddb//mods- config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb//mods-enabled/attr_filter reading pairlist file /etc/raddb//mods- config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /etc/raddb//mods- enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/raddb//mods- enabled/detail # Instantiating module "eap" from file /etc/raddb//mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb//certs" pem_file_type = yes private_key_file = "/etc/raddb//certs/server.pem" certificate_file = "/etc/raddb//certs/server.pem" ca_file = "/etc/raddb//certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb//certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" disable_tlsv1 = no disable_tlsv1_1 = no disable_tlsv1_2 = no tls_max_version = "1.2" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } The configuration allows TLS 1.0 and/or TLS 1.1. We STRONGLY recommned using only TLS 1.2 for security Please set: tls_min_version = "1.2" # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/raddb//mods- enabled/expiration # Instantiating module "files" from file /etc/raddb//mods- enabled/files reading pairlist file /etc/raddb//mods-config/files/authorize reading pairlist file /etc/raddb//mods-config/files/accounting reading pairlist file /etc/raddb//mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/raddb//mods- enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb//mods- enabled/linelog # Instantiating module "logintime" from file /etc/raddb//mods- enabled/logintime # Instantiating module "mschap" from file /etc/raddb//mods- enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/raddb//mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/raddb//mods- enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/raddb//mods- enabled/preprocess reading pairlist file /etc/raddb//mods-config/preprocess/huntgroups reading pairlist file /etc/raddb//mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb//mods- enabled/realm # Instantiating module "suffix" from file /etc/raddb//mods- enabled/realm # Instantiating module "bangpath" from file /etc/raddb//mods- enabled/realm # Instantiating module "realmpercent" from file /etc/raddb//mods- enabled/realm # Instantiating module "ntdomain" from file /etc/raddb//mods- enabled/realm # Instantiating module "ldap" from file /etc/raddb//mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20446 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldaps://172.16.1.33:636 TLS certificate verification: Error, unable to get issuer certificate rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldaps://172.16.1.33:636 TLS certificate verification: Error, unable to get issuer certificate rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldaps://172.16.1.33:636 TLS certificate verification: Error, unable to get issuer certificate rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldaps://172.16.1.33:636 TLS certificate verification: Error, unable to get issuer certificate rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldaps://172.16.1.33:636 TLS certificate verification: Error, unable to get issuer certificate rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb//radiusd.conf } # server server default { # from file /etc/raddb//sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb//sites-enabled/inner- tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb//sites-enabled/inner-tunnel:345 } # server inner-tunnel server copy-acct-to-home-server { # from file /etc/raddb//sites- enabled/copy-acct-to-home-server # Loading preacct {...} # Loading accounting {...} } # server copy-acct-to-home-server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "detail" listen { filename = "/var/log/radius/radacct/detail-*" load_factor = 10 poll_interval = 1 retry_interval = 30 one_shot = no track = no } } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner- tunnel Listening on detail file /var/log/radius/radacct/detail-* as server copy-acct-to-home-server Listening on proxy address * port 33344 Listening on proxy address :: port 45782 Ready to process requests detail (/var/log/radius/radacct/detail-*): Polling for detail file detail (/var/log/radius/radacct/detail-*): Detail listener state unopened waiting 0.769579 sec detail (/var/log/radius/radacct/detail-*): Polling for detail file detail (/var/log/radius/radacct/detail-*): Detail listener state unopened waiting 1.219527 sec detail (/var/log/radius/radacct/detail-*): Polling for detail file detail (/var/log/radius/radacct/detail-*): Detail listener state unopened waiting 1.173822 sec detail (/var/log/radius/radacct/detail-*): Polling for detail file detail (/var/log/radius/radacct/detail-*): Detail listener state unopened waiting 1.129156 sec detail (/var/log/radius/radacct/detail-*): Polling for detail file detail (/var/log/radius/radacct/detail-*): Detail listener state unopened waiting 1.249627 sec detail (/var/log/radius/radacct/detail-*): Polling for detail file detail (/var/log/radius/radacct/detail-*): Detail listener state unopened waiting 1.031091 sec detail (/var/log/radius/radacct/detail-*): Polling for detail file detail (/var/log/radius/radacct/detail-*): Detail listener state unopened waiting 0.840066 sec detail (/var/log/radius/radacct/detail-*): Polling for detail file detail (/var/log/radius/radacct/detail-*): Detail listener state unopened waiting 1.239105 sec (0) Received Access-Request Id 108 from 192.168.251.51:39578 to 172.16.1.104:1812 length 190 (0) User-Name = "fimi" (0) NAS-Identifier = "a22aa8d26c65" (0) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x" (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) Calling-Station-Id = "F4-60-E2-B3-96-5C" (0) Connect-Info = "CONNECT 0Mbps 802.11b" (0) Acct-Session-Id = "6A0D6C94095D2E0A" (0) WLAN-Pairwise-Cipher = 1027076 (0) WLAN-Group-Cipher = 1027076 (0) WLAN-AKM-Suite = 1027073 (0) Framed-MTU = 1400 (0) EAP-Message = 0x028b00090166696d69 (0) Message-Authenticator = 0xed1d56eb859202891d34ba433c96ff60 (0) # Executing section authorize from file /etc/raddb//sites- enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "fimi", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 139 length 9 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/raddb//sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_peap to process data (0) eap_peap: Initiating new TLS session (0) eap_peap: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 140 length 6 (0) eap: EAP session adding &reply:State = 0xacb59afcac3983f3 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/raddb//sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 108 from 172.16.1.104:1812 to 192.168.251.51:39578 length 0 (0) EAP-Message = 0x018c00061920 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xacb59afcac3983f3c10471c5771ffc72 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 109 from 192.168.251.51:39578 to 172.16.1.104:1812 length 340 (1) User-Name = "fimi" (1) NAS-Identifier = "a22aa8d26c65" (1) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x" (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) Calling-Station-Id = "F4-60-E2-B3-96-5C" (1) Connect-Info = "CONNECT 0Mbps 802.11b" (1) Acct-Session-Id = "6A0D6C94095D2E0A" (1) WLAN-Pairwise-Cipher = 1027076 (1) WLAN-Group-Cipher = 1027076 (1) WLAN-AKM-Suite = 1027073 (1) Framed-MTU = 1400 (1) EAP-Message = 0x028c008d198000000083160301007e0100007a030363c73063457cfb114c1273ccdcd 419324e47cc9d731c536da4118f5ca68b117700001ec02bc02fc02cc030cca9cca8c009 c013c00ac014009c009d002f0035000a0100003300170000ff01000100000a000800060 01d00170018000b00020100000d00140012040308040401050308050501080606010201 (1) State = 0xacb59afcac3983f3c10471c5771ffc72 (1) Message-Authenticator = 0x1eebb054a163ed4d02c96042b2be741d (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/raddb//sites- enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "fimi", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 140 length 141 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/raddb//sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xacb59afcac3983f3 (1) eap: Finished EAP session with state 0xacb59afcac3983f3 (1) eap: Previous EAP request found for state 0xacb59afcac3983f3, released from the list (1) eap: Peer sent packet with method EAP PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Continuing EAP-TLS (1) eap_peap: Peer indicated complete TLS record size will be 131 bytes (1) eap_peap: Got complete TLS record (131 bytes) (1) eap_peap: [eaptls verify] = length included (1) eap_peap: (other): before SSL initialization (1) eap_peap: TLS_accept: before SSL initialization (1) eap_peap: TLS_accept: before SSL initialization (1) eap_peap: <<< recv TLS 1.3 [length 007e] (1) eap_peap: TLS_accept: SSLv3/TLS read client hello (1) eap_peap: >>> send TLS 1.2 [length 003d] (1) eap_peap: TLS_accept: SSLv3/TLS write server hello (1) eap_peap: >>> send TLS 1.2 [length 0903] (1) eap_peap: TLS_accept: SSLv3/TLS write certificate (1) eap_peap: >>> send TLS 1.2 [length 014d] (1) eap_peap: TLS_accept: SSLv3/TLS write key exchange (1) eap_peap: >>> send TLS 1.2 [length 0004] (1) eap_peap: TLS_accept: SSLv3/TLS write server done (1) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (1) eap_peap: TLS - In Handshake Phase (1) eap_peap: TLS - got 2725 bytes of data (1) eap_peap: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 141 length 1004 (1) eap: EAP session adding &reply:State = 0xacb59afcad3883f3 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/raddb//sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 109 from 172.16.1.104:1812 to 192.168.251.51:39578 length 0 (1) EAP-Message = 0x018d03ec19c000000aa5160303003d020000390303a6c97603f1cc359df7d25c0b12e 85f72f42fbd5b6cc194d7f4d4eb950ef62b3b00c02f000011ff01000100000b00040300 01020017000016030309030b0008ff0008fc0003f8308203f4308202dca003020102020 101300d06092a864886f70d01010b0500308193310b3009060355040613024652310f30 0d06035504080c065261646975733112301006035504070c09536f6d657768657265311 53013060355040a0c0c4578616d706c6520496e632e3120301e06092a864886f70d0109 01161161646d696e406578616d706c652e6f72673126302406035504030c1d4578616d7 06c6520436572746966696361746520417574686f72697479301e170d32313032313331 36333433395a170d3231303431343136333433395a307c310b300906035504061302465 2310f300d06035504080c0652616469757331153013060355040a0c0c4578616d706c65 20496e632e3123302106035504030c1a4578616d70 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xacb59afcad3883f3c10471c5771ffc72 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 110 from 192.168.251.51:39578 to 172.16.1.104:1812 length 205 (2) User-Name = "fimi" (2) NAS-Identifier = "a22aa8d26c65" (2) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x" (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) Calling-Station-Id = "F4-60-E2-B3-96-5C" (2) Connect-Info = "CONNECT 0Mbps 802.11b" (2) Acct-Session-Id = "6A0D6C94095D2E0A" (2) WLAN-Pairwise-Cipher = 1027076 (2) WLAN-Group-Cipher = 1027076 (2) WLAN-AKM-Suite = 1027073 (2) Framed-MTU = 1400 (2) EAP-Message = 0x028d00061900 (2) State = 0xacb59afcad3883f3c10471c5771ffc72 (2) Message-Authenticator = 0x10a42051d77dc96d1a8fdb6e1790ddc7 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/raddb//sites- enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "fimi", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 141 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/raddb//sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xacb59afcad3883f3 (2) eap: Finished EAP session with state 0xacb59afcad3883f3 (2) eap: Previous EAP request found for state 0xacb59afcad3883f3, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer ACKed our handshake fragment (2) eap_peap: [eaptls verify] = request (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 142 length 1000 (2) eap: EAP session adding &reply:State = 0xacb59afcae3b83f3 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/raddb//sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 110 from 172.16.1.104:1812 to 192.168.251.51:39578 length 0 (2) EAP-Message = 0x018e03e81940252cedfbf4c3836e44225fdb79c5f5071c20dc8677feb32af525d7756 778521e8aa7957a7d648b1ba1868b19e84857fb8b172605a1f8f8a4a47ab109a8159d2f 8f5b68023e42aa2322f04ae0a25214f052122adb16ea6d8f688e58ae3759cdc84b24c20 e97f5290004fe308204fa308203e2a003020102021404394f2a191606a4278a02c0e327 b5d0dc1a1914300d06092a864886f70d01010b0500308193310b3009060355040613024 652310f300d06035504080c065261646975733112301006035504070c09536f6d657768 65726531153013060355040a0c0c4578616d706c6520496e632e3120301e06092a86488 6f70d010901161161646d696e406578616d706c652e6f72673126302406035504030c1d 4578616d706c6520436572746966696361746520417574686f72697479301e170d32313 03231333136333433395a170d3231303431343136333433395a308193310b3009060355 040613024652310f300d06035504080c0652616469 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xacb59afcae3b83f3c10471c5771ffc72 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 111 from 192.168.251.51:39578 to 172.16.1.104:1812 length 205 (3) User-Name = "fimi" (3) NAS-Identifier = "a22aa8d26c65" (3) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x" (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) Calling-Station-Id = "F4-60-E2-B3-96-5C" (3) Connect-Info = "CONNECT 0Mbps 802.11b" (3) Acct-Session-Id = "6A0D6C94095D2E0A" (3) WLAN-Pairwise-Cipher = 1027076 (3) WLAN-Group-Cipher = 1027076 (3) WLAN-AKM-Suite = 1027073 (3) Framed-MTU = 1400 (3) EAP-Message = 0x028e00061900 (3) State = 0xacb59afcae3b83f3c10471c5771ffc72 (3) Message-Authenticator = 0xb14601361b16a123aaab75b0b82ba00c (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/raddb//sites- enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "fimi", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 142 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/raddb//sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xacb59afcae3b83f3 (3) eap: Finished EAP session with state 0xacb59afcae3b83f3 (3) eap: Previous EAP request found for state 0xacb59afcae3b83f3, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 143 length 743 (3) eap: EAP session adding &reply:State = 0xacb59afcaf3a83f3 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/raddb//sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 111 from 172.16.1.104:1812 to 192.168.251.51:39578 length 0 (3) EAP-Message = 0x018f02e7190072746966696361746520417574686f72697479821404394f2a191606a 4278a02c0e327b5d0dc1a1914300f0603551d130101ff040530030101ff30360603551d 1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672 f6578616d706c655f63612e63726c300d06092a864886f70d01010b0500038201010084 0b869b8c26a23a9a120e670346fc3ad59f8b235ee1578ade13cd710668564a9a61b5260 ea04a54c65eaed7e37aac1a23b130517fa45fdf34576991981c3e6793f75d88cb482d64 8dd02ac3a08e2ebc23556b1b76f5f3fad93845bd775e210aa5cefd6d2baa0f871d82f34 710b0eea477ea8e26be0521ab9979c249db93590e7c0c1ad8e76dd8241c19f58ced944e 28442b8d4265a21784cd2103a23e43bcb854ebeb2c1038780b723eaaefe957e1c5d2758 2afce334ed5e623832e0ad69a5e9c5d31915eef72ff1d2115168b50e019f2cf54892574 97281e6efe5b26acc91510ffa40f528f3c1b54aa5a (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xacb59afcaf3a83f3c10471c5771ffc72 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 112 from 192.168.251.51:39578 to 172.16.1.104:1812 length 335 (4) User-Name = "fimi" (4) NAS-Identifier = "a22aa8d26c65" (4) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x" (4) NAS-Port-Type = Wireless-802.11 (4) Service-Type = Framed-User (4) Calling-Station-Id = "F4-60-E2-B3-96-5C" (4) Connect-Info = "CONNECT 0Mbps 802.11b" (4) Acct-Session-Id = "6A0D6C94095D2E0A" (4) WLAN-Pairwise-Cipher = 1027076 (4) WLAN-Group-Cipher = 1027076 (4) WLAN-AKM-Suite = 1027073 (4) Framed-MTU = 1400 (4) EAP-Message = 0x028f008819800000007e16030300461000004241048fdc417fe1d3fcecaffdcc000a5 1421f8063c74ef6fd3035691c0eb23b7727f1920fcb300efa8b867394dc98d5cea84698 61c3ef699a8b80721e9a487b2dbd8814030300010116030300280000000000000000fd3 e43ecc7209d9245ae40f8cc7d87f77abaa962fd01d56cf55fe9070e075946 (4) State = 0xacb59afcaf3a83f3c10471c5771ffc72 (4) Message-Authenticator = 0x44a410d1eba2411512f46bed2a722cea (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/raddb//sites- enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /@\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "fimi", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 143 length 136 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/raddb//sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xacb59afcaf3a83f3 (4) eap: Finished EAP session with state 0xacb59afcaf3a83f3 (4) eap: Previous EAP request found for state 0xacb59afcaf3a83f3, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer indicated complete TLS record size will be 126 bytes (4) eap_peap: Got complete TLS record (126 bytes) (4) eap_peap: [eaptls verify] = length included (4) eap_peap: TLS_accept: SSLv3/TLS write server done (4) eap_peap: <<< recv TLS 1.2 [length 0046] (4) eap_peap: TLS_accept: SSLv3/TLS read client key exchange (4) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec (4) eap_peap: <<< recv TLS 1.2 [length 0010] (4) eap_peap: TLS_accept: SSLv3/TLS read finished (4) eap_peap: >>> send TLS 1.2 [length 0001] (4) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec (4) eap_peap: >>> send TLS 1.2 [length 0010] (4) eap_peap: TLS_accept: SSLv3/TLS write finished (4) eap_peap: (other): SSL negotiation finished successfully (4) eap_peap: TLS - Connection Established (4) eap_peap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256" (4) eap_peap: TLS-Session-Version = "TLS 1.2" (4) eap_peap: TLS - got 51 bytes of data (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 144 length 57 (4) eap: EAP session adding &reply:State = 0xacb59afca82583f3 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/raddb//sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) session-state: Saving cached attributes (4) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256" (4) TLS-Session-Version = "TLS 1.2" (4) Sent Access-Challenge Id 112 from 172.16.1.104:1812 to 192.168.251.51:39578 length 0 (4) EAP-Message = 0x0190003919001403030001011603030028d7bfce4f731f8923b50d6ba0a6ff17eac0f e578415834ef87798c898e5d1b5230abb0fc49392cd52 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xacb59afca82583f3c10471c5771ffc72 (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 113 from 192.168.251.51:39578 to 172.16.1.104:1812 length 205 (5) User-Name = "fimi" (5) NAS-Identifier = "a22aa8d26c65" (5) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x" (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) Calling-Station-Id = "F4-60-E2-B3-96-5C" (5) Connect-Info = "CONNECT 0Mbps 802.11b" (5) Acct-Session-Id = "6A0D6C94095D2E0A" (5) WLAN-Pairwise-Cipher = 1027076 (5) WLAN-Group-Cipher = 1027076 (5) WLAN-AKM-Suite = 1027073 (5) Framed-MTU = 1400 (5) EAP-Message = 0x029000061900 (5) State = 0xacb59afca82583f3c10471c5771ffc72 (5) Message-Authenticator = 0xf6d9bebdbb69b67dc8d7eb81d451fb22 (5) Restoring &session-state (5) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM- SHA256" (5) &session-state:TLS-Session-Version = "TLS 1.2" (5) # Executing section authorize from file /etc/raddb//sites- enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /@\./) { (5) if (&User-Name =~ /@\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "fimi", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 144 length 6 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/raddb//sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xacb59afca82583f3 (5) eap: Finished EAP session with state 0xacb59afca82583f3 (5) eap: Previous EAP request found for state 0xacb59afca82583f3, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer ACKed our handshake fragment. handshake is finished (5) eap_peap: [eaptls verify] = success (5) eap_peap: [eaptls process] = success (5) eap_peap: Session established. Decoding tunneled attributes (5) eap_peap: PEAP state TUNNEL ESTABLISHED (5) eap: Sending EAP Request (code 1) ID 145 length 40 (5) eap: EAP session adding &reply:State = 0xacb59afca92483f3 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/raddb//sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) session-state: Saving cached attributes (5) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256" (5) TLS-Session-Version = "TLS 1.2" (5) Sent Access-Challenge Id 113 from 172.16.1.104:1812 to 192.168.251.51:39578 length 0 (5) EAP-Message = 0x019100281900170303001dd7bfce4f731f8924bd8d9b93f79b404ccc3552c051b5803 0a6668f437a (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xacb59afca92483f3c10471c5771ffc72 (5) Finished request Waking up in 4.9 seconds. (6) Received Access-Request Id 114 from 192.168.251.51:39578 to 172.16.1.104:1812 length 239 (6) User-Name = "fimi" (6) NAS-Identifier = "a22aa8d26c65" (6) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x" (6) NAS-Port-Type = Wireless-802.11 (6) Service-Type = Framed-User (6) Calling-Station-Id = "F4-60-E2-B3-96-5C" (6) Connect-Info = "CONNECT 0Mbps 802.11b" (6) Acct-Session-Id = "6A0D6C94095D2E0A" (6) WLAN-Pairwise-Cipher = 1027076 (6) WLAN-Group-Cipher = 1027076 (6) WLAN-AKM-Suite = 1027073 (6) Framed-MTU = 1400 (6) EAP-Message = 0x029100281900170303001d00000000000000016cef8464a32987af1dd82e0082a1aa1 d2885a73a67 (6) State = 0xacb59afca92483f3c10471c5771ffc72 (6) Message-Authenticator = 0x1895937a755c97428d05e1a5719571f7 (6) Restoring &session-state (6) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM- SHA256" (6) &session-state:TLS-Session-Version = "TLS 1.2" (6) # Executing section authorize from file /etc/raddb//sites- enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "fimi", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 145 length 40 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/raddb//sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xacb59afca92483f3 (6) eap: Finished EAP session with state 0xacb59afca92483f3 (6) eap: Previous EAP request found for state 0xacb59afca92483f3, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: [eaptls verify] = ok (6) eap_peap: Done initial handshake (6) eap_peap: [eaptls process] = ok (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state WAITING FOR INNER IDENTITY (6) eap_peap: Identity - fimi (6) eap_peap: Got inner identity 'fimi' (6) eap_peap: Setting default EAP type for tunneled EAP session (6) eap_peap: Got tunneled request (6) eap_peap: EAP-Message = 0x029100090166696d69 (6) eap_peap: Setting User-Name to fimi (6) eap_peap: Sending tunneled request to inner-tunnel (6) eap_peap: EAP-Message = 0x029100090166696d69 (6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_peap: User-Name = "fimi" (6) eap_peap: NAS-Identifier = "a22aa8d26c65" (6) eap_peap: Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x" (6) eap_peap: NAS-Port-Type = Wireless-802.11 (6) eap_peap: Service-Type = Framed-User (6) eap_peap: Calling-Station-Id = "F4-60-E2-B3-96-5C" (6) eap_peap: Connect-Info = "CONNECT 0Mbps 802.11b" (6) eap_peap: Acct-Session-Id = "6A0D6C94095D2E0A" (6) eap_peap: WLAN-Pairwise-Cipher = 1027076 (6) eap_peap: WLAN-Group-Cipher = 1027076 (6) eap_peap: WLAN-AKM-Suite = 1027073 (6) eap_peap: Framed-MTU = 1400 (6) eap_peap: Event-Timestamp = "Feb 16 2021 14:31:51 CET" (6) eap_peap: NAS-IP-Address = 192.168.251.51 (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x029100090166696d69 (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "fimi" (6) NAS-Identifier = "a22aa8d26c65" (6) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x" (6) NAS-Port-Type = Wireless-802.11 (6) Service-Type = Framed-User (6) Calling-Station-Id = "F4-60-E2-B3-96-5C" (6) Connect-Info = "CONNECT 0Mbps 802.11b" (6) Acct-Session-Id = "6A0D6C94095D2E0A" (6) WLAN-Pairwise-Cipher = 1027076 (6) WLAN-Group-Cipher = 1027076 (6) WLAN-AKM-Suite = 1027073 (6) Framed-MTU = 1400 (6) Event-Timestamp = "Feb 16 2021 14:31:51 CET" (6) NAS-IP-Address = 192.168.251.51 (6) WARNING: Outer and inner identities are the same. User privacy is compromised. (6) server inner-tunnel { (6) # Executing section authorize from file /etc/raddb//sites- enabled/inner-tunnel (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "fimi", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: Peer sent EAP Response (code 2) ID 145 length 9 (6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/raddb//sites-enabled/inner- tunnel (6) authenticate { (6) eap: Peer sent packet with method EAP Identity (1) (6) eap: Calling submodule eap_mschapv2 to process data (6) eap_mschapv2: Issuing Challenge (6) eap: Sending EAP Request (code 1) ID 146 length 43 (6) eap: EAP session adding &reply:State = 0xce54cccdcec6d606 (6) [eap] = handled (6) } # authenticate = handled (6) } # server inner-tunnel (6) Virtual server sending reply (6) EAP-Message = 0x0192002b1a01920026108a40c95e71e0350f2a078d5cbc650f6766726565726164697 5732d332e302e3231 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xce54cccdcec6d6066e64469f1bba9a6c (6) eap_peap: Got tunneled reply code 11 (6) eap_peap: EAP-Message = 0x0192002b1a01920026108a40c95e71e0350f2a078d5cbc650f6766726565726164697 5732d332e302e3231 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0xce54cccdcec6d6066e64469f1bba9a6c (6) eap_peap: Got tunneled reply RADIUS code 11 (6) eap_peap: EAP-Message = 0x0192002b1a01920026108a40c95e71e0350f2a078d5cbc650f6766726565726164697 5732d332e302e3231 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0xce54cccdcec6d6066e64469f1bba9a6c (6) eap_peap: Got tunneled Access-Challenge (6) eap: Sending EAP Request (code 1) ID 146 length 74 (6) eap: EAP session adding &reply:State = 0xacb59afcaa2783f3 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/raddb//sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) session-state: Saving cached attributes (6) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256" (6) TLS-Session-Version = "TLS 1.2" (6) Sent Access-Challenge Id 114 from 172.16.1.104:1812 to 192.168.251.51:39578 length 0 (6) EAP-Message = 0x0192004a1900170303003fd7bfce4f731f89250b2de5e4317f7ea66feafcc910fc583 31b209ae3b2f1645748cb849feea90736c1b3dd2fd65985670cf8b0500ebf9f65f4c2cd 9c7666bb (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xacb59afcaa2783f3c10471c5771ffc72 (6) Finished request Waking up in 4.9 seconds. (7) Received Access-Request Id 115 from 192.168.251.51:39578 to 172.16.1.104:1812 length 293 (7) User-Name = "fimi" (7) NAS-Identifier = "a22aa8d26c65" (7) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x" (7) NAS-Port-Type = Wireless-802.11 (7) Service-Type = Framed-User (7) Calling-Station-Id = "F4-60-E2-B3-96-5C" (7) Connect-Info = "CONNECT 0Mbps 802.11b" (7) Acct-Session-Id = "6A0D6C94095D2E0A" (7) WLAN-Pairwise-Cipher = 1027076 (7) WLAN-Group-Cipher = 1027076 (7) WLAN-AKM-Suite = 1027073 (7) Framed-MTU = 1400 (7) EAP-Message = 0x0292005e190017030300530000000000000002c33e469fe868a89587b88a78a823d95 ce11565b6bae206f2ab459b4db443f4f19749b732f97a0bb868d5fa960b4195aea1b707 773f8080e9444b35bccc989c93a662e56f8036a8077d5eb9 (7) State = 0xacb59afcaa2783f3c10471c5771ffc72 (7) Message-Authenticator = 0xb9aba9255bb19133efecdb6c7e8efc39 (7) Restoring &session-state (7) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM- SHA256" (7) &session-state:TLS-Session-Version = "TLS 1.2" (7) # Executing section authorize from file /etc/raddb//sites- enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /@\./) { (7) if (&User-Name =~ /@\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "fimi", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 146 length 94 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/raddb//sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0xce54cccdcec6d606 (7) eap: Finished EAP session with state 0xacb59afcaa2783f3 (7) eap: Previous EAP request found for state 0xacb59afcaa2783f3, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state phase2 (7) eap_peap: EAP method MSCHAPv2 (26) (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x0292003f1a0292003a31d459203b242256b2671bad6cb9aad4d100000000000000000 2e154a7254fcd1553ac37739e9c987d0efa389627bcf2f30066696d69 (7) eap_peap: Setting User-Name to fimi (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x0292003f1a0292003a31d459203b242256b2671bad6cb9aad4d100000000000000000 2e154a7254fcd1553ac37739e9c987d0efa389627bcf2f30066696d69 (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "fimi" (7) eap_peap: State = 0xce54cccdcec6d6066e64469f1bba9a6c (7) eap_peap: NAS-Identifier = "a22aa8d26c65" (7) eap_peap: Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x" (7) eap_peap: NAS-Port-Type = Wireless-802.11 (7) eap_peap: Service-Type = Framed-User (7) eap_peap: Calling-Station-Id = "F4-60-E2-B3-96-5C" (7) eap_peap: Connect-Info = "CONNECT 0Mbps 802.11b" (7) eap_peap: Acct-Session-Id = "6A0D6C94095D2E0A" (7) eap_peap: WLAN-Pairwise-Cipher = 1027076 (7) eap_peap: WLAN-Group-Cipher = 1027076 (7) eap_peap: WLAN-AKM-Suite = 1027073 (7) eap_peap: Framed-MTU = 1400 (7) eap_peap: Event-Timestamp = "Feb 16 2021 14:31:51 CET" (7) eap_peap: NAS-IP-Address = 192.168.251.51 (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x0292003f1a0292003a31d459203b242256b2671bad6cb9aad4d100000000000000000 2e154a7254fcd1553ac37739e9c987d0efa389627bcf2f30066696d69 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "fimi" (7) State = 0xce54cccdcec6d6066e64469f1bba9a6c (7) NAS-Identifier = "a22aa8d26c65" (7) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x" (7) NAS-Port-Type = Wireless-802.11 (7) Service-Type = Framed-User (7) Calling-Station-Id = "F4-60-E2-B3-96-5C" (7) Connect-Info = "CONNECT 0Mbps 802.11b" (7) Acct-Session-Id = "6A0D6C94095D2E0A" (7) WLAN-Pairwise-Cipher = 1027076 (7) WLAN-Group-Cipher = 1027076 (7) WLAN-AKM-Suite = 1027073 (7) Framed-MTU = 1400 (7) Event-Timestamp = "Feb 16 2021 14:31:51 CET" (7) NAS-IP-Address = 192.168.251.51 (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/raddb//sites- enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /@\./) { (7) if (&User-Name =~ /@\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "fimi", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 146 length 63 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) [files] = noop rlm_ldap (ldap): Reserved connection (0) (7) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (7) ldap: --> (cn=fimi) (7) ldap: Performing search in "o=HTBL" with filter "(cn=fimi)", scope "sub" (7) ldap: Waiting for search result... (7) ldap: User object found at DN "cn=FIMI,ou=TEACHERS,ou=EL,o=HTBL" (7) ldap: Added eDirectory password (7) ldap: Binding as user for eDirectory authorization checks (7) ldap: Waiting for bind result... (7) ldap: Bind successful (7) ldap: Bind as user 'cn=FIMI,ou=TEACHERS,ou=EL,o=HTBL' was successful (7) ldap: Processing user attributes (7) ldap: reply:Class := 0x54657374 rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldaps://172.16.1.33:636 TLS certificate verification: Error, unable to get issuer certificate rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (7) [ldap] = updated (7) if ((ok || updated) && User-Password) { (7) if ((ok || updated) && User-Password) -> FALSE (7) [expiration] = noop (7) [logintime] = noop (7) pap: WARNING: Auth-Type already set. Not setting to PAP (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = eap (7) # Executing group from file /etc/raddb//sites-enabled/inner- tunnel (7) authenticate { (7) eap: Expiring EAP session with state 0xce54cccdcec6d606 (7) eap: Finished EAP session with state 0xce54cccdcec6d606 (7) eap: Previous EAP request found for state 0xce54cccdcec6d606, released from the list (7) eap: Peer sent packet with method EAP MSCHAPv2 (26) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap_mschapv2: # Executing group from file /etc/raddb//sites- enabled/inner-tunnel (7) eap_mschapv2: authenticate { (7) mschap: Found Cleartext-Password, hashing to create NT-Password (7) mschap: Creating challenge hash with username: fimi (7) mschap: Client is using MS-CHAPv2 (7) mschap: Adding MS-CHAPv2 MPPE keys (7) eap_mschapv2: [mschap] = ok (7) eap_mschapv2: } # authenticate = ok (7) eap_mschapv2: MSCHAP Success (7) eap: Sending EAP Request (code 1) ID 147 length 51 (7) eap: EAP session adding &reply:State = 0xce54cccdcfc7d606 (7) [eap] = handled (7) } # authenticate = handled (7) } # server inner-tunnel (7) Virtual server sending reply (7) Class := 0x54657374 (7) EAP-Message = 0x019300331a0392002e533d37344538383341333831323330303433453231423444393 831443846304645303534393332434436 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xce54cccdcfc7d6066e64469f1bba9a6c (7) eap_peap: Got tunneled reply code 11 (7) eap_peap: Class := 0x54657374 (7) eap_peap: EAP-Message = 0x019300331a0392002e533d37344538383341333831323330303433453231423444393 831443846304645303534393332434436 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0xce54cccdcfc7d6066e64469f1bba9a6c (7) eap_peap: Got tunneled reply RADIUS code 11 (7) eap_peap: Class := 0x54657374 (7) eap_peap: EAP-Message = 0x019300331a0392002e533d37344538383341333831323330303433453231423444393 831443846304645303534393332434436 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0xce54cccdcfc7d6066e64469f1bba9a6c (7) eap_peap: Got tunneled Access-Challenge (7) eap: Sending EAP Request (code 1) ID 147 length 82 (7) eap: EAP session adding &reply:State = 0xacb59afcab2683f3 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/raddb//sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) session-state: Saving cached attributes (7) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256" (7) TLS-Session-Version = "TLS 1.2" (7) Sent Access-Challenge Id 115 from 172.16.1.104:1812 to 192.168.251.51:39578 length 0 (7) EAP-Message = 0x0193005219001703030047d7bfce4f731f8926d0eb5fb2fb64d352a28529a911dc1f1 6f04df90f49ca7b5d558c6aaa9551b79d2aefe09cabc8d6dab3f7ddfd3e1975c56b057b a096a0d20f24ffcf1b0f8b39 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xacb59afcab2683f3c10471c5771ffc72 (7) Finished request Waking up in 4.9 seconds. (8) Received Access-Request Id 116 from 192.168.251.51:39578 to 172.16.1.104:1812 length 236 (8) User-Name = "fimi" (8) NAS-Identifier = "a22aa8d26c65" (8) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x" (8) NAS-Port-Type = Wireless-802.11 (8) Service-Type = Framed-User (8) Calling-Station-Id = "F4-60-E2-B3-96-5C" (8) Connect-Info = "CONNECT 0Mbps 802.11b" (8) Acct-Session-Id = "6A0D6C94095D2E0A" (8) WLAN-Pairwise-Cipher = 1027076 (8) WLAN-Group-Cipher = 1027076 (8) WLAN-AKM-Suite = 1027073 (8) Framed-MTU = 1400 (8) EAP-Message = 0x029300251900170303001a0000000000000003df886c4c4c30475c1e9f179b8e75396 288fa (8) State = 0xacb59afcab2683f3c10471c5771ffc72 (8) Message-Authenticator = 0xc30bd0a5031ba8aa96fa0c1beae66554 (8) Restoring &session-state (8) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM- SHA256" (8) &session-state:TLS-Session-Version = "TLS 1.2" (8) # Executing section authorize from file /etc/raddb//sites- enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "fimi", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 147 length 37 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/raddb//sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0xce54cccdcfc7d606 (8) eap: Finished EAP session with state 0xacb59afcab2683f3 (8) eap: Previous EAP request found for state 0xacb59afcab2683f3, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state phase2 (8) eap_peap: EAP method MSCHAPv2 (26) (8) eap_peap: Got tunneled request (8) eap_peap: EAP-Message = 0x029300061a03 (8) eap_peap: Setting User-Name to fimi (8) eap_peap: Sending tunneled request to inner-tunnel (8) eap_peap: EAP-Message = 0x029300061a03 (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_peap: User-Name = "fimi" (8) eap_peap: State = 0xce54cccdcfc7d6066e64469f1bba9a6c (8) eap_peap: NAS-Identifier = "a22aa8d26c65" (8) eap_peap: Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x" (8) eap_peap: NAS-Port-Type = Wireless-802.11 (8) eap_peap: Service-Type = Framed-User (8) eap_peap: Calling-Station-Id = "F4-60-E2-B3-96-5C" (8) eap_peap: Connect-Info = "CONNECT 0Mbps 802.11b" (8) eap_peap: Acct-Session-Id = "6A0D6C94095D2E0A" (8) eap_peap: WLAN-Pairwise-Cipher = 1027076 (8) eap_peap: WLAN-Group-Cipher = 1027076 (8) eap_peap: WLAN-AKM-Suite = 1027073 (8) eap_peap: Framed-MTU = 1400 (8) eap_peap: Event-Timestamp = "Feb 16 2021 14:31:51 CET" (8) eap_peap: NAS-IP-Address = 192.168.251.51 (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x029300061a03 (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "fimi" (8) State = 0xce54cccdcfc7d6066e64469f1bba9a6c (8) NAS-Identifier = "a22aa8d26c65" (8) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x" (8) NAS-Port-Type = Wireless-802.11 (8) Service-Type = Framed-User (8) Calling-Station-Id = "F4-60-E2-B3-96-5C" (8) Connect-Info = "CONNECT 0Mbps 802.11b" (8) Acct-Session-Id = "6A0D6C94095D2E0A" (8) WLAN-Pairwise-Cipher = 1027076 (8) WLAN-Group-Cipher = 1027076 (8) WLAN-AKM-Suite = 1027073 (8) Framed-MTU = 1400 (8) Event-Timestamp = "Feb 16 2021 14:31:51 CET" (8) NAS-IP-Address = 192.168.251.51 (8) WARNING: Outer and inner identities are the same. User privacy is compromised. (8) server inner-tunnel { (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/raddb//sites- enabled/inner-tunnel (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [chap] = noop (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "fimi", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) update control { (8) &Proxy-To-Realm := LOCAL (8) } # update control = noop (8) eap: Peer sent EAP Response (code 2) ID 147 length 6 (8) eap: No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) [files] = noop rlm_ldap (ldap): Reserved connection (1) (8) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (8) ldap: --> (cn=fimi) (8) ldap: Performing search in "o=HTBL" with filter "(cn=fimi)", scope "sub" (8) ldap: Waiting for search result... (8) ldap: User object found at DN "cn=FIMI,ou=TEACHERS,ou=EL,o=HTBL" (8) ldap: Added eDirectory password (8) ldap: Binding as user for eDirectory authorization checks (8) ldap: Waiting for bind result... (8) ldap: Bind successful (8) ldap: Bind as user 'cn=FIMI,ou=TEACHERS,ou=EL,o=HTBL' was successful (8) ldap: Processing user attributes (8) ldap: reply:Class := 0x54657374 rlm_ldap (ldap): Released connection (1) (8) [ldap] = updated (8) if ((ok || updated) && User-Password) { (8) if ((ok || updated) && User-Password) -> FALSE (8) [expiration] = noop (8) [logintime] = noop (8) pap: WARNING: Auth-Type already set. Not setting to PAP (8) [pap] = noop (8) } # authorize = updated (8) Found Auth-Type = eap (8) # Executing group from file /etc/raddb//sites-enabled/inner- tunnel (8) authenticate { (8) eap: Expiring EAP session with state 0xce54cccdcfc7d606 (8) eap: Finished EAP session with state 0xce54cccdcfc7d606 (8) eap: Previous EAP request found for state 0xce54cccdcfc7d606, released from the list (8) eap: Peer sent packet with method EAP MSCHAPv2 (26) (8) eap: Calling submodule eap_mschapv2 to process data (8) eap: Sending EAP Success (code 3) ID 147 length 4 (8) eap: Freeing handler (8) [eap] = ok (8) } # authenticate = ok (8) # Executing section post-auth from file /etc/raddb//sites- enabled/inner-tunnel (8) post-auth { (8) update outer.session-state { (8) User-Name := &User-Name -> 'fimi' (8) } # update outer.session-state = noop (8) if (0) { (8) if (0) -> FALSE (8) } # post-auth = noop (8) Login OK: [fimi] (from client private-network-1 port 0 cli F4-60- E2-B3-96-5C via TLS tunnel) (8) } # server inner-tunnel (8) Virtual server sending reply (8) Class := 0x54657374 (8) MS-MPPE-Encryption-Policy = Encryption-Allowed (8) MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (8) MS-MPPE-Send-Key = 0x10c1a0afdb990b0c89cbafea1fb5a023 (8) MS-MPPE-Recv-Key = 0x945a04e47cdc6cc2855e4671b019dac8 (8) EAP-Message = 0x03930004 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) User-Name = "fimi" (8) eap_peap: Got tunneled reply code 2 (8) eap_peap: Class := 0x54657374 (8) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (8) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (8) eap_peap: MS-MPPE-Send-Key = 0x10c1a0afdb990b0c89cbafea1fb5a023 (8) eap_peap: MS-MPPE-Recv-Key = 0x945a04e47cdc6cc2855e4671b019dac8 (8) eap_peap: EAP-Message = 0x03930004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: User-Name = "fimi" (8) eap_peap: Got tunneled reply RADIUS code 2 (8) eap_peap: Class := 0x54657374 (8) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (8) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (8) eap_peap: MS-MPPE-Send-Key = 0x10c1a0afdb990b0c89cbafea1fb5a023 (8) eap_peap: MS-MPPE-Recv-Key = 0x945a04e47cdc6cc2855e4671b019dac8 (8) eap_peap: EAP-Message = 0x03930004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: User-Name = "fimi" (8) eap_peap: Tunneled authentication was successful (8) eap_peap: SUCCESS (8) eap_peap: Saving tunneled attributes for later (8) eap: Sending EAP Request (code 1) ID 148 length 46 (8) eap: EAP session adding &reply:State = 0xacb59afca42183f3 (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) # Executing group from file /etc/raddb//sites-enabled/default (8) Challenge { ... } # empty sub-section is ignored (8) session-state: Saving cached attributes (8) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256" (8) TLS-Session-Version = "TLS 1.2" (8) User-Name := "fimi" (8) Sent Access-Challenge Id 116 from 172.16.1.104:1812 to 192.168.251.51:39578 length 0 (8) EAP-Message = 0x0194002e19001703030023d7bfce4f731f8927e59eccb9a0df53bdd33beb426543316 13c93d58c9b3cb1a370fd58 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0xacb59afca42183f3c10471c5771ffc72 (8) Finished request Waking up in 4.8 seconds. (9) Received Access-Request Id 117 from 192.168.251.51:39578 to 172.16.1.104:1812 length 245 (9) User-Name = "fimi" (9) NAS-Identifier = "a22aa8d26c65" (9) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x" (9) NAS-Port-Type = Wireless-802.11 (9) Service-Type = Framed-User (9) Calling-Station-Id = "F4-60-E2-B3-96-5C" (9) Connect-Info = "CONNECT 0Mbps 802.11b" (9) Acct-Session-Id = "6A0D6C94095D2E0A" (9) WLAN-Pairwise-Cipher = 1027076 (9) WLAN-Group-Cipher = 1027076 (9) WLAN-AKM-Suite = 1027073 (9) Framed-MTU = 1400 (9) EAP-Message = 0x0294002e1900170303002300000000000000049cbc0856d443a17c57cf0e9696e0be8 29f55af83884de32f3d1fed (9) State = 0xacb59afca42183f3c10471c5771ffc72 (9) Message-Authenticator = 0xbbafaf4a03ca8cd3833cd32b4090599f (9) Restoring &session-state (9) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM- SHA256" (9) &session-state:TLS-Session-Version = "TLS 1.2" (9) &session-state:User-Name := "fimi" (9) # Executing section authorize from file /etc/raddb//sites- enabled/default (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /@\./) { (9) if (&User-Name =~ /@\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "fimi", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 148 length 46 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/raddb//sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0xacb59afca42183f3 (9) eap: Finished EAP session with state 0xacb59afca42183f3 (9) eap: Previous EAP request found for state 0xacb59afca42183f3, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: Continuing EAP-TLS (9) eap_peap: [eaptls verify] = ok (9) eap_peap: Done initial handshake (9) eap_peap: [eaptls process] = ok (9) eap_peap: Session established. Decoding tunneled attributes (9) eap_peap: PEAP state send tlv success (9) eap_peap: Received EAP-TLV response (9) eap_peap: Success (9) eap_peap: Using saved attributes from the original Access-Accept (9) eap_peap: Class := 0x54657374 (9) eap_peap: User-Name = "fimi" (9) eap: Sending EAP Success (code 3) ID 148 length 4 (9) eap: Freeing handler (9) [eap] = ok (9) } # authenticate = ok (9) # Executing section post-auth from file /etc/raddb//sites- enabled/default (9) post-auth { (9) detail: EXPAND /var/log/radius/radacct/detail-%{Packet-Src-IP- Address}-%Y%m%d (9) detail: --> /var/log/radius/radacct/detail-192.168.251.51- 20210216 (9) detail: /var/log/radius/radacct/detail-%{Packet-Src-IP-Address}- %Y%m%d expands to /var/log/radius/radacct/detail-192.168.251.51- 20210216 (9) detail: EXPAND %t (9) detail: --> Tue Feb 16 14:31:51 2021 (9) [detail] = ok (9) if (session-state:User-Name && reply:User-Name && request:User- Name && (reply:User-Name == request:User-Name)) { (9) if (session-state:User-Name && reply:User-Name && request:User- Name && (reply:User-Name == request:User-Name)) -> TRUE (9) if (session-state:User-Name && reply:User-Name && request:User- Name && (reply:User-Name == request:User-Name)) { (9) update reply { (9) &User-Name !* ANY (9) } # update reply = noop (9) } # if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) = noop (9) update { (9) &reply::TLS-Session-Cipher-Suite += &session-state:TLS- Session-Cipher-Suite[*] -> 'ECDHE-RSA-AES128-GCM-SHA256' (9) &reply::TLS-Session-Version += &session-state:TLS-Session- Version[*] -> 'TLS 1.2' (9) &reply::User-Name += &session-state:User-Name[*] -> 'fimi' (9) } # update = noop (9) [exec] = noop (9) } # post-auth = ok (9) Login OK: [fimi] (from client private-network-1 port 0 cli F4-60- E2-B3-96-5C) (9) Sent Access-Accept Id 117 from 172.16.1.104:1812 to 192.168.251.51:39578 length 0 (9) Class := 0x54657374 (9) MS-MPPE-Recv-Key = 0xf050c53e55a61c968578e1eb912fb311a88ac83aa9c8da1b150215372df7e8dd (9) MS-MPPE-Send-Key = 0x44486a1a39cd12bc26a4aa7af8ba5ab15af6d50c0761d5f871e30a0a26319915 (9) EAP-Message = 0x03940004 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) User-Name += "fimi" (9) Finished request Waking up in 4.8 seconds. detail (/var/log/radius/radacct/detail-*): Polling for detail file detail (/var/log/radius/radacct/detail-*): Renaming /var/log/radius/radacct/detail-192.168.251.51-20210216 -> /var/log/radius/radacct/detail.work detail (/var/log/radius/radacct/detail-*): Read packet from /var/log/radius/radacct/detail.work Packet-Type = Access-Accept Class = 0x54657374 User-Name = "fimi" MS-MPPE-Recv-Key = 0xf050c53e55a61c968578e1eb912fb311a88ac83aa9c8da1b150215372df7e8dd MS-MPPE-Send-Key = 0x44486a1a39cd12bc26a4aa7af8ba5ab15af6d50c0761d5f871e30a0a26319915 EAP-MSK = 0xf050c53e55a61c968578e1eb912fb311a88ac83aa9c8da1b150215372df7e8dd44486 a1a39cd12bc26a4aa7af8ba5ab15af6d50c0761d5f871e30a0a26319915 EAP-EMSK = 0x8e69ff7772e986232fe655bd169495f41d41a92fe5d60073c08629f8cc9a7829381a2 9a5277fbce20a14a70dadd25244e7f53ab509635c741374cd23769d9fe6 EAP-Session-Id = 0x1963c73063457cfb114c1273ccdcd419324e47cc9d731c536da4118f5ca68b1177a6c 97603f1cc359df7d25c0b12e85f72f42fbd5b6cc194d7f4d4eb950ef62b3b EAP-Message = 0x03940004 Message-Authenticator = 0x00000000000000000000000000000000 Packet-Original-Timestamp = "Feb 16 2021 14:31:51 CET" Packet-Transmit-Counter = 1 Waking up in 3.9 seconds. detail (/var/log/radius/radacct/detail-*): Unlinking /var/log/radius/radacct/detail.work detail (/var/log/radius/radacct/detail-*): Polling for detail file detail (/var/log/radius/radacct/detail-*): Detail listener state unopened waiting 0.757665 sec detail (/var/log/radius/radacct/detail-*): Polling for detail file detail (/var/log/radius/radacct/detail-*): Detail listener state unopened waiting 0.917765 sec detail (/var/log/radius/radacct/detail-*): Polling for detail file detail (/var/log/radius/radacct/detail-*): Detail listener state unopened waiting 0.913522 sec detail (/var/log/radius/radacct/detail-*): Polling for detail file detail (/var/log/radius/radacct/detail-*): Detail listener state unopened waiting 1.103471 sec (0) Cleaning up request packet ID 108 with timestamp +8 (1) Cleaning up request packet ID 109 with timestamp +8 (2) Cleaning up request packet ID 110 with timestamp +8 (3) Cleaning up request packet ID 111 with timestamp +8 (4) Cleaning up request packet ID 112 with timestamp +8 (5) Cleaning up request packet ID 113 with timestamp +8 (6) Cleaning up request packet ID 114 with timestamp +8 (7) Cleaning up request packet ID 115 with timestamp +8 (8) Cleaning up request packet ID 116 with timestamp +8 (9) Cleaning up request packet ID 117 with timestamp +8 Ready to process requests Have a nice day, Mike